/**
|
*******************************************************************************
|
* @FileName : hci_defs.h
|
* @Author : Gaoqiu
|
* @CreateDate: 2020-02-18
|
* @Copyright : Copyright(C) GaoQiu
|
* All Rights Reserved.
|
*
|
*******************************************************************************
|
*
|
* The information contained herein is confidential and proprietary property of
|
* GaoQiu and is available under the terms of Commercial License Agreement
|
* between GaoQiu and the licensee in separate contract or the terms described
|
* here-in.
|
*
|
* This heading MUST NOT be removed from this file.
|
*
|
* Licensees are granted free, non-transferable use of the information in this
|
* file under Mutual Non-Disclosure Agreement. NO WARRENTY of ANY KIND is provided.
|
*
|
*******************************************************************************
|
*/
|
|
#ifndef HCI_DEFS_H_
|
#define HCI_DEFS_H_
|
|
/**
|
* @Name: Packet definitions
|
* @{
|
*/
|
#define HCI_CMD_HDR_LEN 3 /*!< Command packet header length */
|
#define HCI_ACL_HDR_LEN 4 /*!< ACL packet header length */
|
#define HCI_ISO_HDR_LEN 4 /*!< ISO packet header length */
|
#define HCI_EVT_HDR_LEN 2 /*!< Event packet header length */
|
#define HCI_EVT_PARAM_MAX_LEN 255 /*!< Maximum length of event packet parameters */
|
#define HCI_ACL_DEFAULT_LEN 27 /*!< Default maximum ACL packet length */
|
#define HCI_PB_FLAG_MASK 0x3000 /*!< ACL packet boundary flag mask */
|
#define HCI_PB_START_H2C 0x0000 /*!< Packet boundary flag, start, host-to-controller */
|
#define HCI_PB_CONTINUE 0x1000 /*!< Packet boundary flag, continue */
|
#define HCI_PB_START_C2H 0x2000 /*!< Packet boundary flag, start, controller-to-host */
|
#define HCI_HANDLE_MASK 0x0FFF /*!< Mask for handle bits in ACL packet */
|
#define HCI_HANDLE_NONE 0xFFFF /*!< Value for invalid handle */
|
/**@}*/
|
|
/**
|
* @Name: Packet types
|
* @{
|
*/
|
#define HCI_CMD_TYPE 1 /*!< HCI command packet */
|
#define HCI_ACL_TYPE 2 /*!< HCI ACL data packet */
|
#define HCI_SCO_TYPE 3
|
#define HCI_EVT_TYPE 4 /*!< HCI event packet */
|
#define HCI_ISO_TYPE 5 /*!< HCI ISO data packet */
|
/**@}*/
|
|
|
/**
|
* @Name Error codes
|
* @{
|
*/
|
#define HCI_SUCCESS 0x00 /*!< Success */
|
#define HCI_ERR_UNKNOWN_CMD 0x01 /*!< Unknown HCI command */
|
#define HCI_ERR_UNKNOWN_HANDLE 0x02 /*!< Unknown connection identifier */
|
#define HCI_ERR_HARDWARE_FAILURE 0x03 /*!< Hardware failure */
|
#define HCI_ERR_PAGE_TIMEOUT 0x04 /*!< Page timeout */
|
#define HCI_ERR_AUTH_FAILURE 0x05 /*!< Authentication failure */
|
#define HCI_ERR_KEY_MISSING 0x06 /*!< PIN or key missing */
|
#define HCI_ERR_MEM_CAP_EXCEEDED 0x07 /*!< Memory capacity exceeded */
|
#define HCI_ERR_CONN_TIMEOUT 0x08 /*!< Connection timeout */
|
#define HCI_ERR_CONN_LIMIT 0x09 /*!< Connection limit exceeded */
|
#define HCI_ERR_SYNCH_CONN_LIMIT 0x0A /*!< Synchronous connection limit exceeded */
|
#define HCI_ERR_ACL_CONN_EXISTS 0x0B /*!< ACL connection already exists */
|
#define HCI_ERR_CMD_DISALLOWED 0x0C /*!< Command disallowed */
|
#define HCI_ERR_CONN_REJ_LIMITED_RESOURCES 0x0D /*!< Connection rejected limited resources */
|
#define HCI_ERR_CONN_REJ_SECURITY_REASONS 0x0E /*!< Connection rejected security reasons */
|
#define HCI_ERR_CONN_REJ_UNACCEPTABLE_BD_ADDR 0x0F /*!< Connection rejected unacceptable BD_ADDR */
|
#define HCI_ERR_CONN_ACCEPT_TIMEOUT 0x10 /*!< Connection accept timeout exceeded */
|
#define HCI_ERR_UNSUP_FEAT_PARAM_VALUE 0x11 /*!< Unsupported feature or parameter value */
|
#define HCI_ERR_INVALID_HCI_CMD_PARAM 0x12 /*!< Invalid HCI command parameters */
|
#define HCI_ERR_REMOTE_USER_TERM_CONN 0x13 /*!< Remote user terminated connection */
|
#define HCI_ERR_REMOTE_TERM_LOW_RESOURCES 0x14 /*!< Remote device low resources */
|
#define HCI_ERR_REMOTE_TERM_POWER_OFF 0x15 /*!< Remote device power off */
|
#define HCI_ERR_CONN_TERM_BY_LOCAL_HOST 0x16 /*!< Connection terminated by local host */
|
#define HCI_ERR_REPEATED_ATTEMPTS 0x17 /*!< Repeated attempts */
|
#define HCI_ERR_PAIRING_NOT_ALLOWED 0x18 /*!< Pairing not allowed */
|
#define HCI_ERR_UNKNOWN_LMP_PDU 0x19 /*!< Unknown LMP PDU */
|
#define HCI_ERR_UNSUP_REMOTE_FEAT 0x1A /*!< Unsupported remote feature */
|
#define HCI_ERR_SCO_OFFSET_REJ 0x1B /*!< SCO offset rejected */
|
#define HCI_ERR_SCO_INTERVAL_REJ 0x1C /*!< SCO interval rejected */
|
#define HCI_ERR_SCO_AIR_MODE_REJ 0x1D /*!< SCO air mode rejected */
|
#define HCI_ERR_INVALID_LMP_PARAM 0x1E /*!< Invalid LMP parameters */
|
#define HCI_ERR_UNSPECIFIED_ERR 0x1F /*!< Unspecified error */
|
#define HCI_ERR_UNSUP_LMP_PARAM_VALUE 0x20 /*!< Unsupported LMP parameter value */
|
#define HCI_ERR_ROLE_CHANGE_NOT_ALLOWED 0x21 /*!< Role change not allowed */
|
#define HCI_ERR_LL_RESP_TIMEOUT 0x22 /*!< LL response timeout */
|
#define HCI_ERR_LMP_COLLISION 0x23 /*!< LMP error transaction collision */
|
#define HCI_ERR_LMP_PDU_NOT_ALLOWED 0x24 /*!< LMP pdu not allowed */
|
#define HCI_ERR_ENCRYPT_MODE_NOT_ACCEPTABLE 0x25 /*!< Encryption mode not acceptable */
|
#define HCI_ERR_LINK_KEY_CAN_NOT_BE_CHANGED 0x26 /*!< Link key can not be changed */
|
#define HCI_ERR_UNSUP_QOS 0x27 /*!< Requested qos not supported */
|
#define HCI_ERR_INSTANT_PASSED 0x28 /*!< Instant passed */
|
#define HCI_ERR_PAIRING_WITH_UNIT_KEY_NOT_SUPPORTED 0x29 /*!< Pairing with unit key not supported */
|
#define HCI_ERR_DIFFERENT_TRANSACTION_COLLISION 0x2A /*!< Different transaction collision */
|
#define HCI_ERR_QOS_UNACCEPTABLE_PARAM 0x2C
|
#define HCI_ERR_QOS_REJ 0x2D
|
#define HCI_ERR_CHANNEL_CLASS_NOT_SUPPORTED 0x2E /*!< Channel classification not supported */
|
#define HCI_ERR_INSUFFICIENT_SECURITY 0x2F /*!< Insufficient security */
|
#define HCI_ERR_PARAM_OUT_OF_MANDATORY_RANGE 0x30 /*!< Parameter out of mandatory range */
|
#define HCI_ERR_ROLE_SWITCH_PENDING 0x32 /*!< Role switch pending */
|
#define HCI_ERR_RESERVED_SLOT_VIOLATION 0x34 /*!< Reserved slot violation */
|
#define HCI_ERR_ROLE_SWITCH_FAILED 0x35 /*!< Role switch failed */
|
#define HCI_ERR_EXTENDED_INQUIRY_RESP_TOO_LARGE 0x36 /*!< Extended inquiry response too large */
|
#define HCI_ERR_SIMPLE_PAIRING_NOT_SUPPORTED_BY_HOST 0x37 /*!< Secure simple pairing not supported by host */
|
#define HCI_ERR_HOST_BUSY_PAIRING 0x38 /*!< Host busy - pairing */
|
#define HCI_ERR_CONN_REJ_NO_SUITABLE_CHAN_FOUND 0x39 /*!< Connection rejected no suitable channel */
|
#define HCI_ERR_CONTROLLER_BUSY 0x3A /*!< Controller busy */
|
#define HCI_ERR_UNACCEPTABLE_CONN_INTERVAL 0x3B /*!< Unacceptable connection interval */
|
#define HCI_ERR_ADV_TIMEOUT 0x3C /*!< Advertising timeout */
|
#define HCI_ERR_CONN_TERM_MIC_FAILURE 0x3D /*!< Connection terminated due to MIC failure */
|
#define HCI_ERR_CONN_FAILED_TO_ESTABLISH 0x3E /*!< Connection failed to be established */
|
#define HCI_ERR_MAC_CONN_FAILED 0x3F /*!< MAC connection failed */
|
#define HCI_ERR_COARSE_CLK_ADJ_REJ 0x40 /*!< Coarse clock adjustment rejected */
|
#define HCI_ERR_TYPE0_SUBMAP_NOT_DEF 0x41 /*!< Type0 submap not defined */
|
#define HCI_ERR_UNKNOWN_ADV_ID 0x42 /*!< Unknown advertising identifier */
|
#define HCI_ERR_LIMIT_REACHED 0x43 /*!< Limit reached */
|
#define HCI_ERR_OP_CANCELLED_BY_HOST 0x44 /*!< Operation cancelled by host */
|
/*! New in version 5.1 */
|
#define HCI_ERR_PKT_TOO_LONG 0x45 /*!< Packet too long */
|
|
/*! Vendor Specific error code. */
|
#define HCI_ERR_FW_VER 0xA0
|
#define HCI_ERR_FW_SIZE 0xA1
|
#define HCI_ERR_DFU_DISABLED 0xA2
|
#define HCI_ERR_DFU_ENABLEED 0xA3
|
#define HCI_ERR_FW_CHECKSUM 0xA4
|
#define HCI_ERR_FW_CRC 0xA5
|
#define HCI_ERR_FW_INCOMPLETE 0xA6
|
#define HCI_ERR_DATA_LENGTH 0xA7
|
#define HCI_ERR_INVALID_PARAM 0xA8
|
#define HCI_ERR_RESEND_FAILED 0xA9
|
/**@}*/
|
|
|
/**
|
*******************************************************************************
|
* HCI Command
|
*******************************************************************************
|
*/
|
/** @Name: Command groups
|
* @{
|
*/
|
#define HCI_OGF_NOP 0x00 /*!< No operation */
|
#define HCI_OGF_LINK_CONTROL 0x01 /*!< Link control */
|
#define HCI_OGF_LINK_POLICY 0x02 /*!< Link policy */
|
#define HCI_OGF_CONTROLLER 0x03 /*!< Controller and baseband */
|
#define HCI_OGF_INFORMATIONAL 0x04 /*!< Informational parameters */
|
#define HCI_OGF_STATUS 0x05 /*!< Status parameters */
|
#define HCI_OGF_TESTING 0x06 /*!< Testing */
|
#define HCI_OGF_LE_CONTROLLER 0x08 /*!< LE controller */
|
#define HCI_OGF_VENDOR_SPEC 0x3F /*!< Vendor specific */
|
/**@}*/
|
|
/** @Name: NOP command
|
*
|
*/
|
#define HCI_OCF_NOP 0x00
|
/**@}*/
|
|
/** @Name: Link control commands
|
* @{
|
*/
|
#define HCI_OCF_DISCONNECT 0x06
|
#define HCI_OCF_READ_REMOTE_VER_INFO 0x1D
|
/**@}*/
|
|
/*! @brief Link policy commands (none used for LE) */
|
|
/**
|
* @Name Controller and baseband commands
|
* @{
|
*/
|
#define HCI_OCF_SET_EVENT_MASK 0x01
|
#define HCI_OCF_RESET 0x03
|
#define HCI_OCF_READ_TX_PWR_LVL 0x2D
|
#define HCI_OCF_SET_CONTROLLER_TO_HOST_FC 0x31
|
#define HCI_OCF_HOST_BUFFER_SIZE 0x33
|
#define HCI_OCF_HOST_NUM_CMPL_PKTS 0x35
|
#define HCI_OCF_SET_EVENT_MASK_PAGE2 0x63
|
#define HCI_OCF_READ_AUTH_PAYLOAD_TO 0x7B
|
#define HCI_OCF_WRITE_AUTH_PAYLOAD_TO 0x7C
|
/**@}*/
|
|
/**
|
* @Name: Informational commands
|
* @{
|
*/
|
#define HCI_OCF_READ_LOCAL_VER_INFO 0x01
|
#define HCI_OCF_READ_LOCAL_SUP_CMDS 0x02
|
#define HCI_OCF_READ_LOCAL_SUP_FEAT 0x03
|
#define HCI_OCF_READ_BUF_SIZE 0x05 /*<! Read controller ACL data buffer size */
|
#define HCI_OCF_READ_BD_ADDR 0x09
|
/**@}*/
|
|
/**
|
* @Name: Status commands
|
* @{
|
*/
|
#define HCI_OCF_READ_RSSI 0x05
|
/**@}*/
|
|
/**
|
* @Name: LE controller commands
|
* @{
|
*/
|
#define HCI_OCF_LE_SET_EVENT_MASK 0x01
|
#define HCI_OCF_LE_READ_BUF_SIZE 0x02
|
#define HCI_OCF_LE_READ_LOCAL_SUP_FEAT 0x03
|
#define HCI_OCF_LE_SET_RAND_ADDR 0x05
|
#define HCI_OCF_LE_SET_ADV_PARAM 0x06
|
#define HCI_OCF_LE_READ_ADV_TX_POWER 0x07
|
#define HCI_OCF_LE_SET_ADV_DATA 0x08
|
#define HCI_OCF_LE_SET_SCAN_RESP_DATA 0x09
|
#define HCI_OCF_LE_SET_ADV_ENABLE 0x0A
|
#define HCI_OCF_LE_SET_SCAN_PARAM 0x0B
|
#define HCI_OCF_LE_SET_SCAN_ENABLE 0x0C
|
#define HCI_OCF_LE_CREATE_CONN 0x0D
|
#define HCI_OCF_LE_CREATE_CONN_CANCEL 0x0E
|
#define HCI_OCF_LE_READ_WHITE_LIST_SIZE 0x0F
|
#define HCI_OCF_LE_CLEAR_WHITE_LIST 0x10
|
#define HCI_OCF_LE_ADD_DEV_WHITE_LIST 0x11
|
#define HCI_OCF_LE_REMOVE_DEV_WHITE_LIST 0x12
|
#define HCI_OCF_LE_CONN_UPDATE 0x13
|
#define HCI_OCF_LE_SET_HOST_CHAN_CLASS 0x14
|
#define HCI_OCF_LE_READ_CHAN_MAP 0x15
|
#define HCI_OCF_LE_READ_REMOTE_FEAT 0x16
|
#define HCI_OCF_LE_ENCRYPT 0x17
|
#define HCI_OCF_LE_RAND 0x18
|
#define HCI_OCF_LE_START_ENCRYPTION 0x19
|
#define HCI_OCF_LE_LTK_REQ_REPL 0x1A
|
#define HCI_OCF_LE_LTK_REQ_NEG_REPL 0x1B
|
#define HCI_OCF_LE_READ_SUP_STATES 0x1C
|
#define HCI_OCF_LE_RECEIVER_TEST 0x1D
|
#define HCI_OCF_LE_TRANSMITTER_TEST 0x1E
|
#define HCI_OCF_LE_TEST_END 0x1F
|
/*! New in version 4.1 */
|
#define HCI_OCF_LE_REM_CONN_PARAM_REP 0x20
|
#define HCI_OCF_LE_REM_CONN_PARAM_NEG_REP 0x21
|
/*! New in version 4.2 */
|
#define HCI_OCF_LE_SET_DATA_LEN 0x22
|
#define HCI_OCF_LE_READ_DEF_DATA_LEN 0x23
|
#define HCI_OCF_LE_WRITE_DEF_DATA_LEN 0x24
|
#define HCI_OCF_LE_READ_LOCAL_P256_PUB_KEY 0x25
|
#define HCI_OCF_LE_GENERATE_DHKEY 0x26
|
#define HCI_OCF_LE_ADD_DEV_RES_LIST 0x27
|
#define HCI_OCF_LE_REMOVE_DEV_RES_LIST 0x28
|
#define HCI_OCF_LE_CLEAR_RES_LIST 0x29
|
#define HCI_OCF_LE_READ_RES_LIST_SIZE 0x2A
|
#define HCI_OCF_LE_READ_PEER_RES_ADDR 0x2B
|
#define HCI_OCF_LE_READ_LOCAL_RES_ADDR 0x2C
|
#define HCI_OCF_LE_SET_ADDR_RES_ENABLE 0x2D
|
#define HCI_OCF_LE_SET_RES_PRIV_ADDR_TO 0x2E
|
#define HCI_OCF_LE_READ_MAX_DATA_LEN 0x2F
|
/*! New in version 5.0 */
|
#define HCI_OCF_LE_READ_PHY 0x30
|
#define HCI_OCF_LE_SET_DEF_PHY 0x31
|
#define HCI_OCF_LE_SET_PHY 0x32
|
#define HCI_OCF_LE_ENHANCED_RECEIVER_TEST 0x33
|
#define HCI_OCF_LE_ENHANCED_TRANSMITTER_TEST 0x34
|
#define HCI_OCF_LE_SET_ADV_SET_RAND_ADDR 0x35
|
#define HCI_OCF_LE_SET_EXT_ADV_PARAM 0x36
|
#define HCI_OCF_LE_SET_EXT_ADV_DATA 0x37
|
#define HCI_OCF_LE_SET_EXT_SCAN_RESP_DATA 0x38
|
#define HCI_OCF_LE_SET_EXT_ADV_ENABLE 0x39
|
#define HCI_OCF_LE_READ_MAX_ADV_DATA_LEN 0x3A
|
#define HCI_OCF_LE_READ_NUM_SUP_ADV_SETS 0x3B
|
#define HCI_OCF_LE_REMOVE_ADV_SET 0x3C
|
#define HCI_OCF_LE_CLEAR_ADV_SETS 0x3D
|
#define HCI_OCF_LE_SET_PER_ADV_PARAM 0x3E
|
#define HCI_OCF_LE_SET_PER_ADV_DATA 0x3F
|
#define HCI_OCF_LE_SET_PER_ADV_ENABLE 0x40
|
#define HCI_OCF_LE_SET_EXT_SCAN_PARAM 0x41
|
#define HCI_OCF_LE_SET_EXT_SCAN_ENABLE 0x42
|
#define HCI_OCF_LE_EXT_CREATE_CONN 0x43
|
#define HCI_OCF_LE_PER_ADV_CREATE_SYNC 0x44
|
#define HCI_OCF_LE_PER_ADV_CREATE_SYNC_CANCEL 0x45
|
#define HCI_OCF_LE_PER_ADV_TERM_SYNC 0x46
|
#define HCI_OCF_LE_ADD_DEV_PER_ADV_LIST 0x47
|
#define HCI_OCF_LE_REMOVE_DEV_PER_ADV_LIST 0x48
|
#define HCI_OCF_LE_CLEAR_PER_ADV_LIST 0x49
|
#define HCI_OCF_LE_READ_PER_ADV_LIST_SIZE 0x4A
|
#define HCI_OCF_LE_READ_TX_POWER 0x4B
|
#define HCI_OCF_LE_READ_RF_PATH_COMP 0x4C
|
#define HCI_OCF_LE_WRITE_RF_PATH_COMP 0x4D
|
#define HCI_OCF_LE_SET_PRIVACY_MODE 0x4E
|
/*! New in version 5.1 */
|
#define HCI_OCF_LE_RECEIVER_TEST_V3 0x4F
|
#define HCI_OCF_LE_TRANSMITTER_TEST_V3 0x50
|
#define HCI_OCF_LE_SET_CONNLESS_CTE_TX_PARAMS 0x51
|
#define HCI_OCF_LE_SET_CONNLESS_CTE_TX_ENABLE 0x52
|
#define HCI_OCF_LE_SET_CONNLESS_IQ_SAMP_ENABLE 0x53
|
#define HCI_OCF_LE_SET_CONN_CTE_RX_PARAMS 0x54
|
#define HCI_OCF_LE_SET_CONN_CTE_TX_PARAMS 0x55
|
#define HCI_OCF_LE_CONN_CTE_REQ_ENABLE 0x56
|
#define HCI_OCF_LE_CONN_CTE_RSP_ENABLE 0x57
|
#define HCI_OCF_LE_READ_ANTENNA_INFO 0x58
|
#define HCI_OCF_LE_SET_PER_ADV_RCV_ENABLE 0x59
|
#define HCI_OCF_LE_PER_ADV_SYNC_TRANSFER 0x5A
|
#define HCI_OCF_LE_PER_ADV_SET_INFO_TRANSFER 0x5B
|
#define HCI_OCF_LE_SET_PAST_PARAM 0x5C
|
#define HCI_OCF_LE_SET_DEFAULT_PAST_PARAM 0x5D
|
#define HCI_OCF_LE_GENERATE_DHKEY_V2 0x5E
|
#define HCI_OCF_LE_MODIFY_SLEEP_CLK_ACC 0x5F
|
/**@}**/
|
|
/**
|
* @Name: Vender specific commands
|
* @{
|
*/
|
/* HCI Vendor[PanChip] OCF Group */
|
#define HCI_OCF_VS_GRP_PROPRIETARY_RADIO 0x00
|
#define HCI_OCF_VS_GRP_MODEM 0x01
|
#define HCI_OCF_VS_GRP_PCTE 0x02
|
#define HCI_OCF_VS_GRP_DEBUG 0x0F
|
|
/* HCI Vendor OCF for Proprietary Radio Commands */
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_RESET 0x00
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_INIT 0x01
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_SET_DATA 0x02
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_TRANSMIT 0x03
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_TRANSMIT_ENHANCED 0x04
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_RECEIVE 0x05
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_RECEIVE_ENHANCED 0x06
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_TRANSMIT_TEST 0x07
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_RECEIVE_TEST 0x08
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_RX_GOON 0x09
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_SET_DEV 0x0A
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_ADDR_MATCH_BIT 0x0B
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_SET_PAYLOAD_ENDIAN 0x0C
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_SET_ACK_PAYLOAD 0x0D
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_IRQ_MASK 0x0E
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_MULTI_PREAMBLE 0x0F
|
#define HCI_OCF_VS_PROPRIETARY_RADIO_RX_STOP 0x10
|
|
/* HCI Vendor OCF for Modem Commands */
|
#define HCI_OCF_VS_MODEM_SPI_PHY_CFG 0x00
|
|
/* HCI Vendor OCF for Panchip Constant Tone Extension Commands */
|
#define HCI_OCF_VS_PCTE_SET_IQ_SAMPLES 0x00
|
#define HCI_OCF_VS_PCTE_SET_PARAMS 0x01
|
#define HCI_OCF_VS_PCTE_SET_ADV_ENABLE 0x02
|
#define HCI_OCF_VS_PCTE_SET_SCAN_ENABLE 0x03
|
|
/* HCI Vendor OCF for Debug */
|
#define HCI_OCF_VS_SET_BD_ADDR 0x00
|
#define HCI_OCF_VS_CHECK_LEAK 0x01
|
#define HCI_OCF_VS_RELEASE_VERSION 0x02
|
#define HCI_OCF_VS_SET_TX_POWER 0x03
|
#define HCI_OCF_VS_DEBUG_READ_REG 0x07
|
#define HCI_OCF_VS_DEBUG_WRITE_REG 0x08
|
#define HCI_OCF_VS_DEBUG_PHY 0x09
|
#define HCI_OCF_VS_DEBUG_READ_RSSI_GAIN 0x0A
|
#define HCI_OCF_VS_DEBUG_CONSTANT_TONE_V1 0x0B
|
#define HCI_OCF_VS_DEBUG_CONSTANT_TONE_V2 0x0C
|
#define HCI_OCF_VS_DEBUG_REG_RW 0x0D
|
#define HCI_OCF_VS_DEBUG_SET_PHY_FREQ 0x0E
|
#define HCI_OCF_VS_DEBUG_LE_RECEIVER_TEST 0x0F
|
#define HCI_OCF_VS_DEBUG_LE_TRANSMITTER_TEST 0x10
|
#define HCI_OCF_VS_DEBUG_SET_LE_TRANSMITTER_PARAMS 0x11
|
#define HCI_OCF_VS_DEBUG_SLEEP_ENTER 0x12
|
#define HCI_OCF_VS_DEBUG_POWER_MODE 0x13
|
#define HCI_OCF_VS_SET_TX_POWER_V2 0x14
|
|
/* XiaoMi DFU */
|
#define HCI_OCF_VS_START_DFU 0x0300
|
#define HCI_OCF_VS_END_DFU 0x0301
|
#define HCI_OCF_VS_FW_DATA 0x0302
|
|
//#define HCI_OCF_VS_SET_BD_ADDR 0x03C0
|
//#define HCI_OCF_VS_SET_TX_POWER 0x03C3
|
/**@}**/
|
|
|
/**
|
* @Name: Opcode manipulation macros
|
* @{
|
*/
|
#define HCI_OPCODE(ogf, ocf) (((ogf) << 10) + (ocf))
|
#define HCI_OGF(opcode) ((opcode) >> 10)
|
#define HCI_OCF(opcode) ((opcode) & 0x03FF)
|
|
/* Specific for PanChip */
|
#define HCI_OCF_VS_GRP(opcode) (HCI_OCF(opcode) >> 6)
|
#define HCI_OCF_VS(grp, ocf) (uint16_t)((grp<<6)|(ocf))
|
#define HCI_OPCODE_VS(ogf, grp, ocf) HCI_OPCODE(ogf, HCI_OCF_VS(grp, ocf))
|
/**@}*/
|
|
|
|
/** @Name: Command opcodes
|
* @{
|
*/
|
#define HCI_OPCODE_NOP HCI_OPCODE(HCI_OGF_NOP, HCI_OCF_NOP)
|
|
#define HCI_OPCODE_DISCONNECT HCI_OPCODE(HCI_OGF_LINK_CONTROL, HCI_OCF_DISCONNECT)
|
#define HCI_OPCODE_READ_REMOTE_VER_INFO HCI_OPCODE(HCI_OGF_LINK_CONTROL, HCI_OCF_READ_REMOTE_VER_INFO)
|
|
#define HCI_OPCODE_SET_EVENT_MASK HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_SET_EVENT_MASK)
|
#define HCI_OPCODE_RESET HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_RESET)
|
#define HCI_OPCODE_READ_TX_PWR_LVL HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_READ_TX_PWR_LVL)
|
#define HCI_OPCODE_SET_EVENT_MASK_PAGE2 HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_SET_EVENT_MASK_PAGE2)
|
#define HCI_OPCODE_READ_AUTH_PAYLOAD_TO HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_READ_AUTH_PAYLOAD_TO)
|
#define HCI_OPCODE_WRITE_AUTH_PAYLOAD_TO HCI_OPCODE(HCI_OGF_CONTROLLER, HCI_OCF_WRITE_AUTH_PAYLOAD_TO)
|
|
#define HCI_OPCODE_READ_LOCAL_VER_INFO HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_LOCAL_VER_INFO)
|
#define HCI_OPCODE_READ_LOCAL_SUP_CMDS HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_LOCAL_SUP_CMDS)
|
#define HCI_OPCODE_READ_LOCAL_SUP_FEAT HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_LOCAL_SUP_FEAT)
|
#define HCI_OPCODE_READ_BUF_SIZE HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_BUF_SIZE)
|
#define HCI_OPCODE_READ_BD_ADDR HCI_OPCODE(HCI_OGF_INFORMATIONAL, HCI_OCF_READ_BD_ADDR)
|
|
#define HCI_OPCODE_READ_RSSI HCI_OPCODE(HCI_OGF_STATUS, HCI_OCF_READ_RSSI)
|
|
#define HCI_OPCODE_LE_SET_EVENT_MASK HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EVENT_MASK)
|
#define HCI_OPCODE_LE_READ_BUF_SIZE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_BUF_SIZE)
|
#define HCI_OPCODE_LE_READ_LOCAL_SUP_FEAT HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_LOCAL_SUP_FEAT)
|
#define HCI_OPCODE_LE_SET_RAND_ADDR HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_RAND_ADDR)
|
#define HCI_OPCODE_LE_SET_ADV_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_ADV_PARAM)
|
#define HCI_OPCODE_LE_READ_ADV_TX_POWER HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_ADV_TX_POWER)
|
#define HCI_OPCODE_LE_SET_ADV_DATA HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_ADV_DATA)
|
#define HCI_OPCODE_LE_SET_SCAN_RESP_DATA HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_SCAN_RESP_DATA)
|
#define HCI_OPCODE_LE_SET_ADV_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_ADV_ENABLE)
|
#define HCI_OPCODE_LE_SET_SCAN_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_SCAN_PARAM)
|
#define HCI_OPCODE_LE_SET_SCAN_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_SCAN_ENABLE)
|
#define HCI_OPCODE_LE_CREATE_CONN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CREATE_CONN)
|
#define HCI_OPCODE_LE_CREATE_CONN_CANCEL HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CREATE_CONN_CANCEL)
|
#define HCI_OPCODE_LE_READ_WHITE_LIST_SIZE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_WHITE_LIST_SIZE)
|
#define HCI_OPCODE_LE_CLEAR_WHITE_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CLEAR_WHITE_LIST)
|
#define HCI_OPCODE_LE_ADD_DEV_WHITE_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ADD_DEV_WHITE_LIST)
|
#define HCI_OPCODE_LE_REMOVE_DEV_WHITE_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REMOVE_DEV_WHITE_LIST)
|
#define HCI_OPCODE_LE_CONN_UPDATE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CONN_UPDATE)
|
#define HCI_OPCODE_LE_SET_HOST_CHAN_CLASS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_HOST_CHAN_CLASS)
|
#define HCI_OPCODE_LE_READ_CHAN_MAP HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_CHAN_MAP)
|
#define HCI_OPCODE_LE_READ_REMOTE_FEAT HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_REMOTE_FEAT)
|
#define HCI_OPCODE_LE_ENCRYPT HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ENCRYPT)
|
#define HCI_OPCODE_LE_RAND HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_RAND)
|
#define HCI_OPCODE_LE_START_ENCRYPTION HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_START_ENCRYPTION)
|
#define HCI_OPCODE_LE_LTK_REQ_REPL HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_LTK_REQ_REPL)
|
#define HCI_OPCODE_LE_LTK_REQ_NEG_REPL HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_LTK_REQ_NEG_REPL)
|
#define HCI_OPCODE_LE_READ_SUP_STATES HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_SUP_STATES)
|
#define HCI_OPCODE_LE_RECEIVER_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_RECEIVER_TEST)
|
#define HCI_OPCODE_LE_TRANSMITTER_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_TRANSMITTER_TEST)
|
#define HCI_OPCODE_LE_TEST_END HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_TEST_END)
|
/*! New in version 4.1 */
|
#define HCI_OPCODE_LE_REM_CONN_PARAM_REP HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REM_CONN_PARAM_REP)
|
#define HCI_OPCODE_LE_REM_CONN_PARAM_NEG_REP HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REM_CONN_PARAM_NEG_REP)
|
/*! New in version 4.2 */
|
#define HCI_OPCODE_LE_SET_DATA_LEN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_DATA_LEN)
|
#define HCI_OPCODE_LE_READ_DEF_DATA_LEN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_DEF_DATA_LEN)
|
#define HCI_OPCODE_LE_WRITE_DEF_DATA_LEN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_WRITE_DEF_DATA_LEN)
|
#define HCI_OPCODE_LE_READ_LOCAL_P256_PUB_KEY HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_LOCAL_P256_PUB_KEY)
|
#define HCI_OPCODE_LE_GENERATE_DHKEY HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_GENERATE_DHKEY)
|
#define HCI_OPCODE_LE_ADD_DEV_RES_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ADD_DEV_RES_LIST)
|
#define HCI_OPCODE_LE_REMOVE_DEV_RES_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REMOVE_DEV_RES_LIST)
|
#define HCI_OPCODE_LE_CLEAR_RES_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CLEAR_RES_LIST)
|
#define HCI_OPCODE_LE_READ_RES_LIST_SIZE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_RES_LIST_SIZE)
|
#define HCI_OPCODE_LE_READ_PEER_RES_ADDR HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_PEER_RES_ADDR)
|
#define HCI_OPCODE_LE_READ_LOCAL_RES_ADDR HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_LOCAL_RES_ADDR)
|
#define HCI_OPCODE_LE_SET_ADDR_RES_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_ADDR_RES_ENABLE)
|
#define HCI_OPCODE_LE_SET_RES_PRIV_ADDR_TO HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_RES_PRIV_ADDR_TO)
|
#define HCI_OPCODE_LE_READ_MAX_DATA_LEN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_MAX_DATA_LEN)
|
/*! New in version 5.0 */
|
#define HCI_OPCODE_LE_READ_PHY HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_PHY)
|
#define HCI_OPCODE_LE_SET_DEF_PHY HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_DEF_PHY)
|
#define HCI_OPCODE_LE_SET_PHY HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_PHY)
|
#define HCI_OPCODE_LE_ENHANCED_RECEIVER_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ENHANCED_RECEIVER_TEST)
|
#define HCI_OPCODE_LE_ENHANCED_TRANSMITTER_TEST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ENHANCED_TRANSMITTER_TEST)
|
#define HCI_OPCODE_LE_SET_ADV_SET_RAND_ADDR HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_ADV_SET_RAND_ADDR)
|
#define HCI_OPCODE_LE_SET_EXT_ADV_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EXT_ADV_PARAM)
|
#define HCI_OPCODE_LE_SET_EXT_ADV_DATA HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EXT_ADV_DATA)
|
#define HCI_OPCODE_LE_SET_EXT_SCAN_RESP_DATA HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EXT_SCAN_RESP_DATA)
|
#define HCI_OPCODE_LE_SET_EXT_ADV_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EXT_ADV_ENABLE)
|
#define HCI_OPCODE_LE_READ_MAX_ADV_DATA_LEN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_MAX_ADV_DATA_LEN)
|
#define HCI_OPCODE_LE_READ_NUM_SUP_ADV_SETS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_NUM_SUP_ADV_SETS)
|
#define HCI_OPCODE_LE_REMOVE_ADV_SET HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REMOVE_ADV_SET)
|
#define HCI_OPCODE_LE_CLEAR_ADV_SETS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CLEAR_ADV_SETS)
|
#define HCI_OPCODE_LE_SET_PER_ADV_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_PER_ADV_PARAM)
|
#define HCI_OPCODE_LE_SET_PER_ADV_DATA HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_PER_ADV_DATA)
|
#define HCI_OPCODE_LE_SET_PER_ADV_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_PER_ADV_ENABLE)
|
#define HCI_OPCODE_LE_SET_EXT_SCAN_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EXT_SCAN_PARAM)
|
#define HCI_OPCODE_LE_SET_EXT_SCAN_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_EXT_SCAN_ENABLE)
|
#define HCI_OPCODE_LE_EXT_CREATE_CONN HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_EXT_CREATE_CONN)
|
#define HCI_OPCODE_LE_PER_ADV_CREATE_SYNC HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_PER_ADV_CREATE_SYNC)
|
#define HCI_OPCODE_LE_PER_ADV_CREATE_SYNC_CANCEL HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_PER_ADV_CREATE_SYNC_CANCEL)
|
#define HCI_OPCODE_LE_PER_ADV_TERMINATE_SYNC HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_PER_ADV_TERM_SYNC)
|
#define HCI_OPCODE_LE_ADD_DEV_PER_ADV_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_ADD_DEV_PER_ADV_LIST)
|
#define HCI_OPCODE_LE_REMOVE_DEV_PER_ADV_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_REMOVE_DEV_PER_ADV_LIST)
|
#define HCI_OPCODE_LE_CLEAR_PER_ADV_LIST HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CLEAR_PER_ADV_LIST)
|
#define HCI_OPCODE_LE_READ_PER_ADV_LIST_SIZE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_PER_ADV_LIST_SIZE)
|
#define HCI_OPCODE_LE_READ_TX_POWER HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_TX_POWER)
|
#define HCI_OPCODE_LE_WRITE_RF_PATH_COMP HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_WRITE_RF_PATH_COMP)
|
#define HCI_OPCODE_LE_READ_RF_PATH_COMP HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_RF_PATH_COMP)
|
#define HCI_OPCODE_LE_SET_PRIVACY_MODE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_PRIVACY_MODE)
|
/*! New in version 5.1 */
|
#define HCI_OPCODE_LE_RECEIVER_TEST_V3 HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_RECEIVER_TEST_V3)
|
#define HCI_OPCODE_LE_TRANSMITTER_TEST_V3 HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_TRANSMITTER_TEST_V3)
|
#define HCI_OPCODE_LE_SET_CONNLESS_CTE_TX_PARAMS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_CONNLESS_CTE_TX_PARAMS)
|
#define HCI_OPCODE_LE_SET_CONNLESS_CTE_TX_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_CONNLESS_CTE_TX_ENABLE)
|
#define HCI_OPCODE_LE_SET_CONNLESS_IQ_SAMP_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_CONNLESS_IQ_SAMP_ENABLE)
|
#define HCI_OPCODE_LE_SET_CONN_CTE_RX_PARAMS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_CONN_CTE_RX_PARAMS)
|
#define HCI_OPCODE_LE_SET_CONN_CTE_TX_PARAMS HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_CONN_CTE_TX_PARAMS)
|
#define HCI_OPCODE_LE_CONN_CTE_REQ_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CONN_CTE_REQ_ENABLE)
|
#define HCI_OPCODE_LE_CONN_CTE_RSP_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_CONN_CTE_RSP_ENABLE)
|
#define HCI_OPCODE_LE_READ_ANTENNA_INFO HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_READ_ANTENNA_INFO)
|
#define HCI_OPCODE_LE_SET_PER_ADV_RCV_ENABLE HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_PER_ADV_RCV_ENABLE)
|
#define HCI_OPCODE_LE_PER_ADV_SYNC_TRANSFER HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_PER_ADV_SYNC_TRANSFER)
|
#define HCI_OPCODE_LE_PER_ADV_SET_INFO_TRANSFER HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_PER_ADV_SET_INFO_TRANSFER)
|
#define HCI_OPCODE_LE_SET_PAST_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_PAST_PARAM)
|
#define HCI_OPCODE_LE_SET_DEFAULT_PAST_PARAM HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_SET_DEFAULT_PAST_PARAM)
|
#define HCI_OPCODE_LE_GENERATE_DHKEY_V2 HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_GENERATE_DHKEY_V2)
|
#define HCI_OPCODE_LE_MODIFY_SLEEP_CLK_ACC HCI_OPCODE(HCI_OGF_LE_CONTROLLER, HCI_OCF_LE_MODIFY_SLEEP_CLK_ACC)
|
|
/*! Vendor Specific Command opcodes. */
|
#define HCI_OPCODE_VS_START_DFU HCI_OPCODE(HCI_OGF_VENDOR_SPEC, HCI_OCF_VS_START_DFU)
|
#define HCI_OPCODE_VS_END_DFU HCI_OPCODE(HCI_OGF_VENDOR_SPEC, HCI_OCF_VS_END_DFU)
|
#define HCI_OPCODE_VS_FW_DATA HCI_OPCODE(HCI_OGF_VENDOR_SPEC, HCI_OCF_VS_FW_DATA)
|
|
#define HCI_OPCODE_VS_SET_BD_ADDR HCI_OPCODE(HCI_OGF_VENDOR_SPEC, HCI_OCF_VS_SET_BD_ADDR)
|
#define HCI_OPCODE_VS_SET_TX_POWER HCI_OPCODE(HCI_OGF_VENDOR_SPEC, HCI_OCF_VS_SET_TX_POWER)
|
/**@*/
|
|
/**
|
* @Name: Command parameter lengths
|
* @{
|
*/
|
#define HCI_LEN_NOP 0
|
|
#define HCI_LEN_DISCONNECT 3
|
#define HCI_LEN_READ_REMOTE_VER_INFO 2
|
|
#define HCI_LEN_SET_EVENT_MASK 8
|
#define HCI_LEN_SET_EVENT_MASK_PAGE2 8
|
#define HCI_LEN_RESET 0
|
#define HCI_LEN_READ_TX_PWR_LVL 3
|
#define HCI_LEN_SET_CONTROLLER_TO_HOST_FC 1
|
#define HCI_LEN_HOST_BUFFER_SIZE 8
|
#define HCI_LEN_HOST_NUM_CMPL_PKTS 1
|
|
#define HCI_LEN_READ_LOCAL_VER_INFO 0
|
#define HCI_LEN_READ_LOCAL_SUP_CMDS 0
|
#define HCI_LEN_READ_LOCAL_SUP_FEAT 0
|
#define HCI_LEN_READ_BUF_SIZE 0
|
#define HCI_LEN_READ_BD_ADDR 0
|
|
#define HCI_LEN_READ_RSSI 2
|
#define HCI_LEN_READ_AUTH_PAYLOAD_TO 2
|
#define HCI_LEN_WRITE_AUTH_PAYLOAD_TO 4
|
|
#define HCI_LEN_LE_SET_EVENT_MASK 8
|
#define HCI_LEN_LE_READ_BUF_SIZE 0
|
#define HCI_LEN_LE_READ_LOCAL_SUP_FEAT 0
|
#define HCI_LEN_LE_SET_RAND_ADDR 6
|
#define HCI_LEN_LE_SET_ADV_PARAM 15
|
#define HCI_LEN_LE_READ_ADV_TX_POWER 0
|
#define HCI_LEN_LE_SET_ADV_DATA 32
|
#define HCI_LEN_LE_SET_SCAN_RESP_DATA 32
|
#define HCI_LEN_LE_SET_ADV_ENABLE 1
|
#define HCI_LEN_LE_SET_SCAN_PARAM 7
|
#define HCI_LEN_LE_SET_SCAN_ENABLE 2
|
#define HCI_LEN_LE_CREATE_CONN 25
|
#define HCI_LEN_LE_CREATE_CONN_CANCEL 0
|
#define HCI_LEN_LE_READ_WHITE_LIST_SIZE 0
|
#define HCI_LEN_LE_CLEAR_WHITE_LIST 0
|
#define HCI_LEN_LE_ADD_DEV_WHITE_LIST 7
|
#define HCI_LEN_LE_REMOVE_DEV_WHITE_LIST 7
|
#define HCI_LEN_LE_CONN_UPDATE 14
|
#define HCI_LEN_LE_SET_HOST_CHAN_CLASS 5
|
#define HCI_LEN_LE_READ_CHAN_MAP 2
|
#define HCI_LEN_LE_READ_REMOTE_FEAT 2
|
#define HCI_LEN_LE_ENCRYPT 32
|
#define HCI_LEN_LE_RAND 0
|
#define HCI_LEN_LE_START_ENCRYPTION 28
|
#define HCI_LEN_LE_LTK_REQ_REPL 18
|
#define HCI_LEN_LE_LTK_REQ_NEG_REPL 2
|
#define HCI_LEN_LE_READ_SUP_STATES 0
|
#define HCI_LEN_LE_RECEIVER_TEST 1
|
#define HCI_LEN_LE_TRANSMITTER_TEST 3
|
#define HCI_LEN_LE_TEST_END 0
|
/*! New in version 4.1 */
|
#define HCI_LEN_LE_REM_CONN_PARAM_REP 14
|
#define HCI_LEN_LE_REM_CONN_PARAM_NEG_REP 3
|
/*! New in version 4.2 */
|
#define HCI_LEN_LE_SET_DATA_LEN 6
|
#define HCI_LEN_LE_READ_DEF_DATA_LEN 0
|
#define HCI_LEN_LE_WRITE_DEF_DATA_LEN 4
|
#define HCI_LEN_LE_READ_LOCAL_P256_PUB_KEY 0
|
#define HCI_LEN_LE_GENERATE_DHKEY 64
|
#define HCI_LEN_LE_ADD_DEV_RES_LIST 39
|
#define HCI_LEN_LE_REMOVE_DEV_RES_LIST 7
|
#define HCI_LEN_LE_CLEAR_RES_LIST 0
|
#define HCI_LEN_LE_READ_RES_LIST_SIZE 0
|
#define HCI_LEN_LE_READ_PEER_RES_ADDR 7
|
#define HCI_LEN_LE_READ_LOCAL_RES_ADDR 7
|
#define HCI_LEN_LE_SET_ADDR_RES_ENABLE 1
|
#define HCI_LEN_LE_SET_RES_PRIV_ADDR_TO 2
|
#define HCI_LEN_LE_READ_MAX_DATA_LEN 0
|
/*! New in version 5.0 */
|
#define HCI_LEN_LE_READ_PHY 2
|
#define HCI_LEN_LE_SET_DEF_PHY 3
|
#define HCI_LEN_LE_SET_PHY 7
|
#define HCI_LEN_LE_ENHANCED_RECEIVER_TEST 3
|
#define HCI_LEN_LE_ENHANCED_TRANSMITTER_TEST 4
|
#define HCI_LEN_LE_SET_ADV_SET_RAND_ADDR 7
|
#define HCI_LEN_LE_SET_EXT_ADV_PARAM 25
|
#define HCI_LEN_LE_SET_EXT_ADV_DATA(len) (4 + (len))
|
#define HCI_LEN_LE_SET_EXT_SCAN_RESP_DATA(len) (4 + (len))
|
#define HCI_LEN_LE_EXT_ADV_ENABLE(numSets) (2 + (4 * (numSets)))
|
#define HCI_LEN_LE_READ_MAX_ADV_DATA_LEN 0
|
#define HCI_LEN_LE_READ_NUM_OF_SUP_ADV_SETS 0
|
#define HCI_LEN_LE_REMOVE_ADV_SET 1
|
#define HCI_LEN_LE_CLEAR_ADV_SETS 0
|
#define HCI_LEN_LE_SET_PER_ADV_PARAM 7
|
#define HCI_LEN_LE_SET_PER_ADV_DATA(len) (3 + (len))
|
#define HCI_LEN_LE_SET_PER_ADV_ENABLE 2
|
#define HCI_LEN_LE_SET_EXT_SCAN_PARAM(numPhys) (3 + (5 * (numPhys)))
|
#define HCI_LEN_LE_SET_EXT_SCAN_ENABLE 6
|
#define HCI_LEN_LE_EXT_CREATE_CONN(numPhys) (10 + (16 * (numPhys)))
|
#define HCI_LEN_LE_PER_ADV_CREATE_SYNC 14
|
#define HCI_LEN_LE_PER_ADV_CREATE_SYNC_CANCEL 0
|
#define HCI_LEN_LE_PER_ADV_TERMINATE_SYNC 2
|
#define HCI_LEN_LE_ADD_DEV_PER_ADV_LIST 8
|
#define HCI_LEN_LE_REMOVE_DEV_PER_ADV_LIST 8
|
#define HCI_LEN_LE_CLEAR_PER_ADV_LIST 0
|
#define HCI_LEN_LE_READ_PER_ADV_LIST_SIZE 0
|
#define HCI_LEN_LE_READ_TX_POWER 0
|
#define HCI_LEN_LE_READ_RF_PATH_COMP 0
|
#define HCI_LEN_LE_WRITE_RF_PATH_COMP 4
|
#define HCI_LEN_LE_SET_PRIVACY_MODE 8
|
/*! New in version 5.1 */
|
#define HCI_LEN_LE_SET_CONN_CTE_RX_PARAMS(spLen) (5 + (spLen))
|
#define HCI_LEN_LE_SET_CONN_CTE_TX_PARAMS(spLen) (4 + (spLen))
|
#define HCI_LEN_LE_CONN_CTE_REQ_ENABLE 7
|
#define HCI_LEN_LE_CONN_CTE_RSP_ENABLE 3
|
#define HCI_LEN_LE_READ_ANTENNA_INFO 0
|
#define HCI_LEN_LE_SET_PER_ADV_RCV_ENABLE 3
|
#define HCI_LEN_LE_PER_ADV_SYNC_TRANSFER 6
|
#define HCI_LEN_LE_PER_ADV_SET_INFO_TRANSFER 5
|
#define HCI_LEN_LE_SET_PAST_PARAM 8
|
#define HCI_LEN_LE_SET_DEFAULT_PAST_PARAM 6
|
#define HCI_LEN_LE_GENERATE_DHKEY_V2 65
|
|
#define HCI_LEN_VS_START_DFU 7
|
#define HCI_LEN_VS_END_DFU 1
|
|
#define HCI_CMD_PARAM_LEN_MAX 65
|
/**@}*/
|
|
|
/**
|
*******************************************************************************
|
* HCI Event
|
*******************************************************************************
|
*/
|
/**
|
* @Name: Events
|
* @{
|
*/
|
#define HCI_DISCONNECT_CMPL_EVT 0x05
|
#define HCI_ENC_CHANGE_EVT 0x08
|
#define HCI_READ_REMOTE_VER_INFO_CMPL_EVT 0x0C
|
#define HCI_CMD_CMPL_EVT 0x0E
|
#define HCI_CMD_STATUS_EVT 0x0F
|
#define HCI_HW_ERROR_EVT 0x10
|
#define HCI_NUM_CMPL_PKTS_EVT 0x13
|
#define HCI_DATA_BUF_OVERFLOW_EVT 0x1A
|
#define HCI_ENC_KEY_REFRESH_CMPL_EVT 0x30
|
#define HCI_LE_META_EVT 0x3E /* LE event */
|
#define HCI_AUTH_PAYLOAD_TIMEOUT_EVT 0x57
|
#define HCI_VENDOR_SPEC_EVT 0xFF
|
/**@}*/
|
|
|
/**
|
* @Name LE Subevents
|
* @{
|
*/
|
#define HCI_LE_CONN_CMPL_EVT 0x01
|
#define HCI_LE_ADV_REPORT_EVT 0x02
|
#define HCI_LE_CONN_UPDATE_CMPL_EVT 0x03
|
#define HCI_LE_READ_REMOTE_FEAT_CMPL_EVT 0x04
|
#define HCI_LE_LTK_REQ_EVT 0x05
|
/*! New in version 4.1 */
|
#define HCI_LE_REM_CONN_PARAM_REQ_EVT 0x06
|
/*! New in version 4.2 */
|
#define HCI_LE_DATA_LEN_CHANGE_EVT 0x07
|
#define HCI_LE_READ_LOCAL_P256_PUB_KEY_CMPL_EVT 0x08
|
#define HCI_LE_GENERATE_DHKEY_CMPL_EVT 0x09
|
#define HCI_LE_ENHANCED_CONN_CMPL_EVT 0x0A
|
#define HCI_LE_DIRECT_ADV_REPORT_EVT 0x0B
|
/*! New in version 5.0 */
|
#define HCI_LE_PHY_UPDATE_CMPL_EVT 0x0C
|
#define HCI_LE_EXT_ADV_REPORT_EVT 0x0D
|
#define HCI_LE_PER_ADV_SYNC_EST_EVT 0x0E
|
#define HCI_LE_PER_ADV_REPORT_EVT 0x0F
|
#define HCI_LE_PER_ADV_SYNC_LOST_EVT 0x10
|
#define HCI_LE_SCAN_TIMEOUT_EVT 0x11
|
#define HCI_LE_ADV_SET_TERM_EVT 0x12
|
#define HCI_LE_SCAN_REQ_RCVD_EVT 0x13
|
#define HCI_LE_CH_SEL_ALGO_EVT 0x14
|
/*! New in version 5.1 */
|
#define HCI_LE_CONNLESS_IQ_REPORT_EVT 0x15
|
#define HCI_LE_CONN_IQ_REPORT_EVT 0x16
|
#define HCI_LE_CTE_REQ_FAILED_EVT 0x17
|
#define HCI_LE_PER_SYNC_TRSF_RCVD_EVT 0x18
|
/**@}*/
|
|
|
/**
|
* @Name: Event parameter lengths
|
* @{
|
*/
|
#define HCI_LEN_DISCONNECT_CMPL 4 /*!< Disconnect event length. */
|
#define HCI_LEN_READ_REMOTE_VER_INFO_CMPL 8 /*!< Read remove version info complete event length. */
|
#define HCI_LEN_CMD_CMPL 3 /*!< Command complete event length. */
|
#define HCI_LEN_CMD_STATUS 4 /*!< Command status event length. */
|
#define HCI_LEN_HW_ERR 1 /*!< Hardware error event length. */
|
#define HCI_LEN_NUM_CMPL_PKTS 5 /*!< Number of completed packets event length. */
|
#define HCI_LEN_DATA_BUF_OVERFLOW 1 /*!< Data buffer overflow length. */
|
#define HCI_LEN_ENC_CHANGE 4 /*!< Encryption change event length. */
|
#define HCI_LEN_ENC_KEY_REFRESH_CMPL 3 /*!< Encryption key refresh complete event length. */
|
#define HCI_LEN_LE_CONN_CMPL 19 /*!< Connection complete event length. */
|
#define HCI_LEN_LE_ADV_RPT_MIN 12 /*!< Advertising report event minimum length. */
|
#define HCI_LEN_LE_CONN_UPDATE_CMPL 10 /*!< Connection update complete event length. */
|
#define HCI_LEN_LE_READ_REMOTE_FEAT_CMPL 12 /*!< Read remote feature event length. */
|
#define HCI_LEN_LE_LTK_REQ 13 /*!< LTK request event length. */
|
/*! New in version 4.1 */
|
#define HCI_LEN_LE_REM_CONN_PARAM_REQ 11 /*!< Remote connection parameter event length. */
|
#define HCI_LEN_LE_DATA_LEN_CHANGE 11 /*!< Data length change event length. */
|
#define HCI_LEN_LE_READ_PUB_KEY_CMPL 66 /*!< Read local P256 public key compete event length. */
|
#define HCI_LEN_LE_GEN_DHKEY_CMPL 34 /*!< Generate DH key complete event length. */
|
#define HCI_LEN_LE_ENHANCED_CONN_CMPL 31 /*!< Enhanced connection complete event length. */
|
#define HCI_LEN_LE_DIRECT_ADV_REPORT 18 /*!< Direct advertising report event length. */
|
#define HCI_LEN_AUTH_PAYLOAD_TIMEOUT 2 /*!< Authenticated payload timeout event length. */
|
/*! New in version 5.0 */
|
#define HCI_LEN_LE_PHY_UPDATE_CMPL 6 /*!< PHY update complete event length. */
|
#define HCI_LEN_LE_CH_SEL_ALGO 4 /*!< Channel selection algorithm event length. */
|
#define HCI_LEN_LE_PHY_UPDATE_CMPL 6 /*!< PHY update complete event length. */
|
#define HCI_LEN_LE_EXT_ADV_REPORT_MIN 26 /*!< Extended advertising report minimum length. */
|
#define HCI_LEN_LE_PER_ADV_SYNC_EST 16 /*!< Periodic advertising sync established event length. */
|
#define HCI_LEN_LE_PER_ADV_REPORT 8 /*!< Periodic advertising report event length. */
|
#define HCI_LEN_LE_PER_ADV_SYNC_LOST 3 /*!< Periodic advertising sync lost event length. */
|
#define HCI_LEN_LE_SCAN_TIMEOUT 1 /*!< Scan timeout event length. */
|
#define HCI_LEN_LE_ADV_SET_TERM 6 /*!< Advertising set terminated event length. */
|
#define HCI_LEN_LE_SCAN_REQ_RCVD 9 /*!< Scan request received event length. */
|
/*! New in version 5.1 */
|
#define HCI_LEN_LE_PER_SYNC_TRSF_RCVT 20 /*!< Periodic advertising sync transfer received event length. */
|
|
/*! Vender Specific */
|
#define HCI_LEN_VS_START_DFU_CMPL 3
|
#define HCI_LEN_VS_END_DFU_CMPL 1
|
/**@}*/
|
|
|
/**
|
* @Name: Supported commands
|
* @{
|
*/
|
#define HCI_SUP_DISCONNECT 0x20 /*!< Byte 0 */
|
#define HCI_SUP_READ_REMOTE_VER_INFO 0x80 /*!< Byte 2 */
|
#define HCI_SUP_SET_EVENT_MASK 0x40 /*!< Byte 5 */
|
#define HCI_SUP_RESET 0x80 /*!< Byte 5 */
|
#define HCI_SUP_READ_TX_PWR_LVL 0x04 /*!< Byte 10 */
|
#define HCI_SUP_READ_LOCAL_VER_INFO 0x08 /*!< Byte 14 */
|
#define HCI_SUP_READ_LOCAL_SUP_FEAT 0x20 /*!< Byte 14 */
|
#define HCI_SUP_READ_BD_ADDR 0x02 /*!< Byte 15 */
|
#define HCI_SUP_READ_RSSI 0x20 /*!< Byte 15 */
|
#define HCI_SUP_SET_EVENT_MASK_PAGE2 0x04 /*!< Byte 22 */
|
#define HCI_SUP_LE_SET_EVENT_MASK 0x01 /*!< Byte 25 */
|
#define HCI_SUP_LE_READ_BUF_SIZE 0x02 /*!< Byte 25 */
|
#define HCI_SUP_LE_READ_LOCAL_SUP_FEAT 0x04 /*!< Byte 25 */
|
#define HCI_SUP_LE_SET_RAND_ADDR 0x10 /*!< Byte 25 */
|
#define HCI_SUP_LE_SET_ADV_PARAM 0x20 /*!< Byte 25 */
|
#define HCI_SUP_LE_READ_ADV_TX_POWER 0x40 /*!< Byte 25 */
|
#define HCI_SUP_LE_SET_ADV_DATA 0x80 /*!< Byte 25 */
|
#define HCI_SUP_LE_SET_SCAN_RESP_DATA 0x01 /*!< Byte 26 */
|
#define HCI_SUP_LE_SET_ADV_ENABLE 0x02 /*!< Byte 26 */
|
#define HCI_SUP_LE_SET_SCAN_PARAM 0x04 /*!< Byte 26 */
|
#define HCI_SUP_LE_SET_SCAN_ENABLE 0x08 /*!< Byte 26 */
|
#define HCI_SUP_LE_CREATE_CONN 0x10 /*!< Byte 26 */
|
#define HCI_SUP_LE_CREATE_CONN_CANCEL 0x20 /*!< Byte 26 */
|
#define HCI_SUP_LE_READ_WHITE_LIST_SIZE 0x40 /*!< Byte 26 */
|
#define HCI_SUP_LE_CLEAR_WHITE_LIST 0x80 /*!< Byte 26 */
|
#define HCI_SUP_LE_ADD_DEV_WHITE_LIST 0x01 /*!< Byte 27 */
|
#define HCI_SUP_LE_REMOVE_DEV_WHITE_LIST 0x02 /*!< Byte 27 */
|
#define HCI_SUP_LE_CONN_UPDATE 0x04 /*!< Byte 27 */
|
#define HCI_SUP_LE_SET_HOST_CHAN_CLASS 0x08 /*!< Byte 27 */
|
#define HCI_SUP_LE_READ_CHAN_MAP 0x10 /*!< Byte 27 */
|
#define HCI_SUP_LE_READ_REMOTE_FEAT 0x20 /*!< Byte 27 */
|
#define HCI_SUP_LE_ENCRYPT 0x40 /*!< Byte 27 */
|
#define HCI_SUP_LE_RAND 0x80 /*!< Byte 27 */
|
#define HCI_SUP_LE_START_ENCRYPTION 0x01 /*!< Byte 28 */
|
#define HCI_SUP_LE_LTK_REQ_REPL 0x02 /*!< Byte 28 */
|
#define HCI_SUP_LE_LTK_REQ_NEG_REPL 0x04 /*!< Byte 28 */
|
#define HCI_SUP_LE_READ_SUP_STATES 0x08 /*!< Byte 28 */
|
#define HCI_SUP_LE_RECEIVER_TEST 0x10 /*!< Byte 28 */
|
#define HCI_SUP_LE_TRANSMITTER_TEST 0x20 /*!< Byte 28 */
|
#define HCI_SUP_LE_TEST_END 0x40 /*!< Byte 28 */
|
#define HCI_SUP_READ_AUTH_PAYLOAD_TO 0x10 /*!< Byte 32 */
|
#define HCI_SUP_WRITE_AUTH_PAYLOAD_TO 0x20 /*!< Byte 32 */
|
/*! New in version 4.1 */
|
#define HCI_SUP_LE_REM_CONN_PARAM_REQ_REPL 0x10 /*!< Byte 33 */
|
#define HCI_SUP_LE_REM_CONN_PARAM_REQ_NEG_REPL 0x20 /*!< Byte 33 */
|
/*! New in version 4.2 */
|
#define HCI_SUP_LE_SET_DATA_LEN 0x40 /*!< Byte 33 */
|
#define HCI_SUP_LE_READ_DEF_DATA_LEN 0x80 /*!< Byte 33 */
|
#define HCI_SUP_LE_WRITE_DEF_DATA_LEN 0x01 /*!< Byte 34 */
|
#define HCI_SUP_LE_READ_LOCAL_P256_PUB_KEY 0x02 /*!< Byte 34 */
|
#define HCI_SUP_LE_GENERATE_DHKEY 0x04 /*!< Byte 34 */
|
#define HCI_SUP_LE_ADD_DEV_RES_LIST_EVT 0x08 /*!< Byte 34 */
|
#define HCI_SUP_LE_REMOVE_DEV_RES_LIST 0x10 /*!< Byte 34 */
|
#define HCI_SUP_LE_CLEAR_RES_LIST 0x20 /*!< Byte 34 */
|
#define HCI_SUP_LE_READ_RES_LIST_SIZE 0x40 /*!< Byte 34 */
|
#define HCI_SUP_LE_READ_PEER_RES_ADDR 0x80 /*!< Byte 34 */
|
#define HCI_SUP_LE_READ_LOCAL_RES_ADDR 0x01 /*!< Byte 35 */
|
#define HCI_SUP_LE_SET_ADDR_RES_ENABLE 0x02 /*!< Byte 35 */
|
#define HCI_SUP_LE_SET_RES_PRIV_ADDR_TO 0x04 /*!< Byte 35 */
|
#define HCI_SUP_LE_READ_MAX_DATA_LEN 0x08 /*!< Byte 35 */
|
/*! New in version 5.0 */
|
#define HCI_SUP_LE_READ_PHY 0x10 /*!< Byte 35 */
|
#define HCI_SUP_LE_SET_DEF_PHY 0x20 /*!< Byte 35 */
|
#define HCI_SUP_LE_SET_PHY 0x40 /*!< Byte 35 */
|
#define HCI_SUP_LE_ENHANCED_RECEIVER_TEST 0x80 /*!< Byte 35 */
|
#define HCI_SUP_LE_ENHANCED_TRANSMITTER_TEST 0x01 /*!< Byte 36 */
|
#define HCI_SUP_LE_SET_ADV_SET_RAND_ADDR 0x02 /*!< Byte 36 */
|
#define HCI_SUP_LE_SET_EXT_ADV_PARAM 0x04 /*!< Byte 36 */
|
#define HCI_SUP_LE_SET_EXT_ADV_DATA 0x08 /*!< Byte 36 */
|
#define HCI_SUP_LE_SET_EXT_SCAN_RESP_DATA 0x10 /*!< Byte 36 */
|
#define HCI_SUP_LE_SET_EXT_ADV_ENABLE 0x20 /*!< Byte 36 */
|
#define HCI_SUP_LE_READ_MAX_ADV_DATA_LEN 0x40 /*!< Byte 36 */
|
#define HCI_SUP_LE_READ_NUM_OF_SUP_ADV_SETS 0x80 /*!< Byte 36 */
|
#define HCI_SUP_LE_REMOVE_ADV_SET 0x01 /*!< Byte 37 */
|
#define HCI_SUP_LE_CLEAR_ADV_SETS 0x02 /*!< Byte 37 */
|
#define HCI_SUP_LE_SET_PER_ADV_PARAM 0x04 /*!< Byte 37 */
|
#define HCI_SUP_LE_SET_PER_ADV_DATA 0x08 /*!< Byte 37 */
|
#define HCI_SUP_LE_SET_PER_ADV_ENABLE 0x10 /*!< Byte 37 */
|
#define HCI_SUP_LE_SET_EXT_SCAN_PARAM 0x20 /*!< Byte 37 */
|
#define HCI_SUP_LE_SET_EXT_SCAN_ENABLE 0x40 /*!< Byte 37 */
|
#define HCI_SUP_LE_EXT_CREATE_CONN 0x80 /*!< Byte 37 */
|
#define HCI_SUP_LE_PER_ADV_CREATE_SYNC 0x01 /*!< Byte 38 */
|
#define HCI_SUP_LE_PER_ADV_CREATE_SYNC_CANCEL 0x02 /*!< Byte 38 */
|
#define HCI_SUP_LE_PER_ADV_TERMINATE_SYNC 0x04 /*!< Byte 38 */
|
#define HCI_SUP_LE_ADD_DEV_PER_ADV_LIST 0x08 /*!< Byte 38 */
|
#define HCI_SUP_LE_REMOVE_DEV_PER_ADV_LIST 0x10 /*!< Byte 38 */
|
#define HCI_SUP_LE_CLEAR_PER_ADV_LIST 0x20 /*!< Byte 38 */
|
#define HCI_SUP_LE_READ_PER_ADV_LIST_SIZE 0x40 /*!< Byte 38 */
|
#define HCI_SUP_LE_READ_TX_POWER 0x80 /*!< Byte 38 */
|
#define HCI_SUP_LE_READ_RF_PATH_COMP 0x01 /*!< Byte 39 */
|
#define HCI_SUP_LE_WRITE_RF_PATH_COMP 0x02 /*!< Byte 39 */
|
#define HCI_SUP_LE_SET_PRIVACY_MODE 0x04 /*!< Byte 39 */
|
/*! New in version 5.1 */
|
#define HCI_SUP_LE_RECEIVER_TEST_V3 0x08 /*!< Byte 39 */
|
#define HCI_SUP_LE_TRANSMITTER_TEST_V3 0x10 /*!< Byte 39 */
|
#define HCI_SUP_LE_SET_CONNLESS_CTE_TX_PARAMS 0x20 /*!< Byte 39 */
|
#define HCI_SUP_LE_SET_CONNLESS_CTE_TX_ENABLE 0x40 /*!< Byte 39 */
|
#define HCI_SUP_LE_SET_CONNLESS_IQ_SAMP_ENABLE 0x80 /*!< Byte 39 */
|
#define HCI_SUP_LE_SET_CONN_CTE_RX_PARAMS 0x01 /*!< Byte 40 */
|
#define HCI_SUP_LE_SET_CONN_CTE_TX_PARAMS 0x02 /*!< Byte 40 */
|
#define HCI_SUP_LE_CONN_CTE_REQ_ENABLE 0x04 /*!< Byte 40 */
|
#define HCI_SUP_LE_CONN_CTE_RSP_ENABLE 0x08 /*!< Byte 40 */
|
#define HCI_SUP_LE_READ_ANTENNA_INFO 0x10 /*!< Byte 40 */
|
#define HCI_SUP_LE_SET_PER_ADV_RCV_ENABLE 0x20 /*!< Byte 40 */
|
#define HCI_SUP_LE_PER_ADV_SYNC_TRANSFER 0x40 /*!< Byte 40 */
|
#define HCI_SUP_LE_PER_ADV_SET_INFO_TRANSFER 0x80 /*!< Byte 40 */
|
#define HCI_SUP_LE_SET_PAST_PARAM 0x01 /*!< Byte 41 */
|
#define HCI_SUP_LE_SET_DEFAULT_PAST_PARAM 0x02 /*!< Byte 41 */
|
#define HCI_SUP_LE_GENERATE_DHKEY_V2 0x04 /*!< Byte 41 */
|
#define HCI_SUP_LE_MODIFY_SLEEP_CLK_ACCURACY 0x10 /*!< Byte 41 */
|
/*! New in version Milan */
|
#define HCI_SUP_LE_READ_BUF_SIZE_V2 0x01 /*!< Byte 42 */
|
#define HCI_SUP_LE_SET_CIG_PARAM 0x02 /*!< Byte 42 */
|
#define HCI_SUP_LE_CREATE_CIS 0x04 /*!< Byte 42 */
|
#define HCI_SUP_LE_REMOVE_CIG 0x08 /*!< Byte 42 */
|
#define HCI_SUP_LE_ACCEPT_CIS_REQ 0x01 /*!< Byte 43 */
|
#define HCI_SUP_LE_REJECT_CIS_REQ 0x02 /*!< Byte 43 */
|
#define HCI_SUP_LE_CREATE_BIG 0x04 /*!< Byte 43 */
|
#define HCI_SUP_LE_BIG_CREATE_SYNC 0x08 /*!< Byte 43 */
|
#define HCI_SUP_LE_TERMINATE_BIG 0x01 /*!< Byte 44 */
|
#define HCI_SUP_LE_SETUP_ISO_DATA_PATH 0x02 /*!< Byte 44 */
|
#define HCI_SUP_LE_REMOVE_ISO_DATA_PATH 0x04 /*!< Byte 44 */
|
#define HCI_SUP_LE_REQ_PEER_SCA 0x08 /*!< Byte 44 */
|
|
#define HCI_SUP_CMD_LEN 64 /*!< Byte length of support cmd field. */
|
|
|
/**
|
* @Name: Event mask
|
* @{
|
*/
|
#define HCI_EVT_MASK_DISCONNECT_CMPL 0x10 /*!< Byte 0 */
|
#define HCI_EVT_MASK_ENC_CHANGE 0x80 /*!< Byte 0 */
|
#define HCI_EVT_MASK_READ_REMOTE_VER_INFO_CMPL 0x08 /*!< Byte 1 */
|
#define HCI_EVT_MASK_HW_ERROR 0x80 /*!< Byte 1 */
|
#define HCI_EVT_MASK_DATA_BUF_OVERFLOW 0x02 /*!< Byte 3 */
|
#define HCI_EVT_MASK_ENC_KEY_REFRESH_CMPL 0x80 /*!< Byte 5 */
|
#define HCI_EVT_MASK_LE_META 0x20 /*!< Byte 7 */
|
/**@}*/
|
|
|
/**
|
* @Name: Event mask page 2
|
* @{
|
*/
|
#define HCI_EVT_MASK_AUTH_PAYLOAD_TIMEOUT 0x80 /*!< Byte 2 */
|
/**@}*/
|
|
|
/**
|
* @Name: LE event mask
|
* @{
|
*/
|
#define HCI_EVT_MASK_LE_CONN_CMPL_EVT 0x01 /*!< Byte 0 */
|
#define HCI_EVT_MASK_LE_ADV_REPORT_EVT 0x02 /*!< Byte 0 */
|
#define HCI_EVT_MASK_LE_CONN_UPDATE_CMPL_EVT 0x04 /*!< Byte 0 */
|
#define HCI_EVT_MASK_LE_READ_REMOTE_FEAT_CMPL_EVT 0x08 /*!< Byte 0 */
|
#define HCI_EVT_MASK_LE_LTK_REQ_EVT 0x10 /*!< Byte 0 */
|
/*! New in version 4.1 */
|
#define HCI_EVT_MASK_LE_REMOTE_CONN_PARAM_REQ_EVT 0x20 /*!< Byte 0 */
|
/*! New in version 4.2 */
|
#define HCI_EVT_MASK_LE_DATA_LEN_CHANGE_EVT 0x40 /*!< Byte 0 */
|
#define HCI_EVT_MASK_LE_READ_LOCAL_P256_PUB_KEY_CMPL 0x80 /*!< Byte 0 */
|
#define HCI_EVT_MASK_LE_GENERATE_DHKEY_CMPL 0x01 /*!< Byte 1 */
|
#define HCI_EVT_MASK_LE_ENHANCED_CONN_CMPL_EVT 0x02 /*!< Byte 1 */
|
#define HCI_EVT_MASK_LE_DIRECT_ADV_REPORT_EVT 0x04 /*!< Byte 1 */
|
/*! New in version 5.0 */
|
#define HCI_EVT_MASK_LE_PHY_UPDATE_CMPL_EVT 0x08 /*!< Byte 1 */
|
#define HCI_EVT_MASK_LE_EXT_ADV_REPORT_EVT 0x10 /*!< Byte 1 */
|
#define HCI_EVT_MASK_LE_PER_ADV_SYNC_EST_EVT 0x20 /*!< Byte 1 */
|
#define HCI_EVT_MASK_LE_PER_ADV_REPORT_EVT 0x40 /*!< Byte 1 */
|
#define HCI_EVT_MASK_LE_PER_ADV_SYNC_LOST_EVT 0x80 /*!< Byte 1 */
|
#define HCI_EVT_MASK_LE_SCAN_TIMEOUT_EVT 0x01 /*!< Byte 2 */
|
#define HCI_EVT_MASK_LE_ADV_SET_TERM_EVT 0x02 /*!< Byte 2 */
|
#define HCI_EVT_MASK_LE_SCAN_REQ_RCVD_EVT 0x04 /*!< Byte 2 */
|
#define HCI_EVT_MASK_LE_CH_SEL_ALGO_EVT 0x08 /*!< Byte 2 (Bit 19) */
|
/*! New in version 5.1 */
|
#define HCI_EVT_MASK_LE_CONNLESS_IQ_REPORT_EVT 0x10 /*!< Byte 2 */
|
#define HCI_EVT_MASK_LE_CONN_IQ_REPORT_EVT 0x20 /*!< Byte 2 */
|
#define HCI_EVT_MASK_LE_CTE_REQ_FAILED_EVT 0x40 /*!< Byte 2 */
|
#define HCI_EVT_MASK_LE_PER_SYNC_TRSF_RCVT_EVT 0x80 /*!< Byte 2 (Bit 23) */
|
/*! New in version Milan */
|
#define HCI_EVT_MASK_LE_CIS_EST_EVT 0x01 /*!< Byte 3 */
|
#define HCI_EVT_MASK_LE_CIS_REQ_EVT 0x02 /*!< Byte 3 */
|
#define HCI_EVT_MASK_LE_BIG_CMPL_EVT 0x04 /*!< Byte 3 */
|
#define HCI_EVT_MASK_LE_BIG_SYNC_LOST_EVT 0x08 /*!< Byte 3 */
|
#define HCI_EVT_MASK_LE_PEER_SCA_CMPL_EVT 0x10 /*!< Byte 3 */
|
/**@}*/
|
|
/**
|
* @Name: LE supported features
|
* @{
|
*/
|
/*! New in version 4.0 */
|
#define HCI_LE_SUP_FEAT_ENCRYPTION 0x00000001 /*!< Encryption supported */
|
/*! New in version 4.1 */
|
#define HCI_LE_SUP_FEAT_CONN_PARAM_REQ_PROC 0x00000002 /*!< Connection Parameters Request Procedure supported */
|
#define HCI_LE_SUP_FEAT_EXT_REJECT_IND 0x00000004 /*!< Extended Reject Indication supported */
|
#define HCI_LE_SUP_FEAT_SLV_INIT_FEAT_EXCH 0x00000008 /*!< Slave-Initiated Features Exchange supported */
|
#define HCI_LE_SUP_FEAT_LE_PING 0x00000010 /*!< LE Ping supported */
|
/*! New in version 4.2 */
|
#define HCI_LE_SUP_FEAT_DATA_LEN_EXT 0x00000020 /*!< Data Length Extension supported */
|
#define HCI_LE_SUP_FEAT_PRIVACY 0x00000040 /*!< LL Privacy supported */
|
#define HCI_LE_SUP_FEAT_EXT_SCAN_FILT_POLICY 0x00000080 /*!< Extended Scan Filter Policy supported */
|
/*! New in version 5.0 */
|
#define HCI_LE_SUP_FEAT_LE_2M_PHY 0x00000100 /*!< LE 2M PHY supported */
|
#define HCI_LE_SUP_FEAT_STABLE_MOD_IDX_TRANSMITTER 0x00000200 /*!< Stable Modulation Index - Transmitter supported */
|
#define HCI_LE_SUP_FEAT_STABLE_MOD_IDX_RECEIVER 0x00000400 /*!< Stable Modulation Index - Receiver supported */
|
#define HCI_LE_SUP_FEAT_LE_CODED_PHY 0x00000800 /*!< LE Coded PHY supported */
|
#define HCI_LE_SUP_FEAT_LE_EXT_ADV 0x00001000 /*!< LE Extended Advertising supported */
|
#define HCI_LE_SUP_FEAT_LE_PER_ADV 0x00002000 /*!< LE Periodic Advertising supported */
|
#define HCI_LE_SUP_FEAT_CH_SEL_2 0x00004000 /*!< Channel Selection Algorithm #2 supported */
|
#define HCI_LE_SUP_FEAT_LE_POWER_CLASS_1 0x00008000 /*!< LE Power Class 1 supported */
|
#define HCI_LE_SUP_FEAT_MIN_NUN_USED_CHAN 0x00010000 /*!< Minimum Number of Used Channels Procedure supported */
|
/*! New in version 5.1 */
|
#define HCI_LE_SUP_FEAT_CONN_CTE_REQ 0x00020000 /*!< Connection CTE Request supported */
|
#define HCI_LE_SUP_FEAT_CONN_CTE_RSP 0x00040000 /*!< Connection CTE Response supported */
|
#define HCI_LE_SUP_FEAT_CONNLESS_CTE_TRANS 0x00080000 /*!< Connectionless CTE Transmitter supported */
|
#define HCI_LE_SUP_FEAT_CONNLESS_CTE_RECV 0x00100000 /*!< Connectionless CTE Receiver supported */
|
#define HCI_LE_SUP_FEAT_ANTENNA_SWITCH_AOD 0x00200000 /*!< Anetenna Switching during CTE Transmission (AoD) supported */
|
#define HCI_LE_SUP_FEAT_ANTENNA_SWITCH_AOA 0x00400000 /*!< Anetenna Switching during CTE Reception (AoA) supported */
|
#define HCI_LE_SUP_FEAT_RECV_CTE 0x00800000 /*!< Receive Constant Tone Extension supported */
|
#define HCI_LE_SUP_FEAT_PAST_SENDER 0x01000000 /*!< Periodic Advertising Sync Transfer Sender supported */
|
#define HCI_LE_SUP_FEAT_PAST_RECIPIENT 0x02000000 /*!< Periodic Advertising Sync Transfer Recipient supported */
|
#define HCI_LE_SUP_FEAT_SCA_UPDATE 0x04000000 /*!< Sleep Clock Accuracy Update supported */
|
#define HCI_LE_SUP_FEAT_REMOTE_PUB_KEY_VALIDATION 0x08000000 /*!< Remote Public Key Validation supported */
|
/*! New in version Milan */
|
#define HCI_LE_SUP_FEAT_CIS_MASTER 0x10000000 /*!< Connected Isochronous Master Role supported */
|
#define HCI_LE_SUP_FEAT_CIS_SLAVE 0x20000000 /*!< Connected Isochronous Slave Role supported */
|
#define HCI_LE_SUP_FEAT_ISO_BROADCASTER 0x40000000 /*!< Isochronous Broadcaster Role supported */
|
#define HCI_LE_SUP_FEAT_ISO_SYNC 0x80000000 /*!< Isochronous Synchronizer Role supported */
|
/**@}*/
|
|
|
/**
|
* @Name: Advertising command parameters
|
* @{
|
*/
|
#define HCI_ADV_MIN_INTERVAL 0x0020 /*!< Minimum advertising interval */
|
#define HCI_ADV_MAX_INTERVAL 0x4000 /*!< Maximum advertising interval */
|
#define HCI_ADV_DIRECTED_MAX_DURATION 0x0500 /*!< Maximum high duty cycle connectable directed advertising duration */
|
#define HCI_ADV_TYPE_CONN_UNDIRECT 0x00 /*!< Connectable undirected advertising */
|
#define HCI_ADV_TYPE_CONN_DIRECT 0x01 /*!< Connectable directed high duty cycle advertising */
|
#define HCI_ADV_TYPE_DISC_UNDIRECT 0x02 /*!< Discoverable undirected advertising */
|
#define HCI_ADV_TYPE_NONCONN_UNDIRECT 0x03 /*!< Nonconnectable undirected advertising */
|
#define HCI_ADV_TYPE_CONN_DIRECT_LO_DUTY 0x04 /*!< Connectable directed low duty cycle advertising */
|
#define HCI_ADV_CHAN_37 0x01 /*!< Advertising channel 37 */
|
#define HCI_ADV_CHAN_38 0x02 /*!< Advertising channel 38 */
|
#define HCI_ADV_CHAN_39 0x04 /*!< Advertising channel 39 */
|
#define HCI_ADV_FILT_NONE 0x00 /*!< No scan request or connection filtering */
|
#define HCI_ADV_FILT_SCAN 0x01 /*!< White list filters scan requests */
|
#define HCI_ADV_FILT_CONN 0x02 /*!< White list filters connections */
|
#define HCI_ADV_FILT_ALL 0x03 /*!< White list filters scan req. and conn. */
|
/**@}*/
|
|
|
/**
|
* @Name: Scan command parameters
|
* @{
|
*/
|
#define HCI_SCAN_TYPE_PASSIVE 0 /*!< Passive scan */
|
#define HCI_SCAN_TYPE_ACTIVE 1 /*!< Active scan */
|
#define HCI_SCAN_INTERVAL_MIN 0x0004 /*!< Minimum scan interval */
|
#define HCI_SCAN_INTERVAL_MAX 0x4000 /*!< Maximum scan interval */
|
#define HCI_SCAN_INTERVAL_DEFAULT 0x0010 /*!< Default scan interval */
|
#define HCI_SCAN_WINDOW_MIN 0x0004 /*!< Minimum scan window */
|
#define HCI_SCAN_WINDOW_MAX 0x4000 /*!< Maximum scan window */
|
#define HCI_SCAN_WINDOW_DEFAULT 0x0010 /*!< Default scan window */
|
/**@}*/
|
|
|
/**
|
* @Name: Connection command parameters
|
* @{
|
*/
|
#define HCI_CONN_INTERVAL_MIN 0x0006 /*!< Minimum connection interval */
|
#define HCI_CONN_INTERVAL_MAX 0x0C80 /*!< Maximum connection interval */
|
#define HCI_CONN_LATENCY_MAX 0x01F3 /*!< Maximum connection latency */
|
#define HCI_SUP_TIMEOUT_MIN 0x000A /*!< Minimum supervision timeout */
|
#define HCI_SUP_TIMEOUT_MAX 0x0C80 /*!< Maximum supervision timeout */
|
/**@}*/
|
|
|
/**
|
* @Name: Connection event parameters
|
* @{
|
*/
|
#define HCI_ROLE_MASTER 0 /*!< Role is master */
|
#define HCI_ROLE_SLAVE 1 /*!< Role is slave */
|
#define HCI_CLOCK_500PPM 0x00 /*!< 500 ppm clock accuracy */
|
#define HCI_CLOCK_250PPM 0x01 /*!< 250 ppm clock accuracy */
|
#define HCI_CLOCK_150PPM 0x02 /*!< 150 ppm clock accuracy */
|
#define HCI_CLOCK_100PPM 0x03 /*!< 100 ppm clock accuracy */
|
#define HCI_CLOCK_75PPM 0x04 /*!< 75 ppm clock accuracy */
|
#define HCI_CLOCK_50PPM 0x05 /*!< 50 ppm clock accuracy */
|
#define HCI_CLOCK_30PPM 0x06 /*!< 30 ppm clock accuracy */
|
#define HCI_CLOCK_20PPM 0x07 /*!< 20 ppm clock accuracy */
|
/**@}*/
|
|
/**
|
* @Name: Advertising report event parameters
|
* @{
|
*/
|
#define HCI_ADV_CONN_UNDIRECT 0x00 /*!< Connectable undirected advertising */
|
#define HCI_ADV_CONN_DIRECT 0x01 /*!< Connectable directed advertising */
|
#define HCI_ADV_DISC_UNDIRECT 0x02 /*!< Discoverable undirected advertising */
|
#define HCI_ADV_NONCONN_UNDIRECT 0x03 /*!< Non-connectable undirected advertising */
|
#define HCI_ADV_SCAN_RESPONSE 0x04 /*!< Scan response */
|
/**@}*/
|
|
|
/**
|
* @Name Bluetooth core specification versions
|
* @{
|
*/
|
#define HCI_VER_BT_CORE_SPEC_4_0 0x06 /*!< Bluetooth core specification 4.0 */
|
#define HCI_VER_BT_CORE_SPEC_4_1 0x07 /*!< Bluetooth core specification 4.1 */
|
#define HCI_VER_BT_CORE_SPEC_4_2 0x08 /*!< Bluetooth core specification 4.2 */
|
#define HCI_VER_BT_CORE_SPEC_5_0 0x09 /*!< Bluetooth core specification 5.0 */
|
#define HCI_VER_BT_CORE_SPEC_5_1 0x0A /*!< Bluetooth core specification 5.1 */
|
/**@}*/
|
|
/**
|
* @Name: Parameter lengths
|
* @{
|
*/
|
#define HCI_EVT_MASK_LEN 8 /*!< Length of event mask byte array */
|
#define HCI_EVT_MASK_PAGE_2_LEN 8 /*!< Length of event mask page 2 byte array */
|
#define HCI_LE_EVT_MASK_LEN 8 /*!< Length of LE event mask byte array */
|
#define HCI_FEAT_LEN 8 /*!< Length of features byte array */
|
#define HCI_ADV_DATA_LEN 31 /*!< Length of advertising data */
|
#define HCI_SCAN_DATA_LEN 31 /*!< Length of scan response data */
|
#define HCI_EXT_ADV_DATA_LEN 251 /*!< Length of extended advertising data */
|
#define HCI_EXT_ADV_CONN_DATA_LEN 191 /*!< Length of extended connectable advertising data */
|
#define HCI_PER_ADV_DATA_LEN 252 /*!< Length of periodic advertising data */
|
#define HCI_EXT_ADV_RPT_DATA_LEN 229 /*!< Length of extended advertising report data */
|
#define HCI_PER_ADV_RPT_DATA_LEN 247 /*!< Length of periodic advertising report data */
|
#define HCI_CHAN_MAP_LEN 5 /*!< Length of channel map byte array */
|
#define HCI_KEY_LEN 16 /*!< Length of encryption key */
|
#define HCI_ENCRYPT_DATA_LEN 16 /*!< Length of data used in encryption */
|
#define HCI_RAND_LEN 8 /*!< Length of random number */
|
#define HCI_LE_STATES_LEN 8 /*!< Length of LE states byte array */
|
#define HCI_P256_KEY_LEN 64 /*!< Length of P256 key */
|
#define HCI_DH_KEY_LEN 32 /*!< Length of DH Key */
|
|
#define HCI_EXT_ADV_RPT_DATA_LEN_OFFSET 23 /*!< Length field offset of extended advertising report data */
|
#define HCI_PER_ADV_RPT_DATA_LEN_OFFSET 6 /*!< Length field offset of periodic advertising report data */
|
/**@}*/
|
|
#endif /* HCI_DEFS_H_ */
|
