/* USER CODE BEGIN Header */
|
/**
|
******************************************************************************
|
* @file stm32h7xx_hal_msp.c
|
* @brief This file provides code for the MSP Initialization
|
* and de-Initialization codes.
|
******************************************************************************
|
* @attention
|
*
|
* Copyright (c) 2025 STMicroelectronics.
|
* All rights reserved.
|
*
|
* This software is licensed under terms that can be found in the LICENSE file
|
* in the root directory of this software component.
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
*
|
******************************************************************************
|
*/
|
/* USER CODE END Header */
|
|
/* Includes ------------------------------------------------------------------*/
|
#include "main.h"
|
/* USER CODE BEGIN Includes */
|
|
/* USER CODE END Includes */
|
extern DMA_HandleTypeDef hdma_uart4_rx;
|
|
extern DMA_HandleTypeDef hdma_uart5_rx;
|
|
extern DMA_HandleTypeDef hdma_uart5_tx;
|
|
extern DMA_HandleTypeDef hdma_usart1_rx;
|
|
extern DMA_HandleTypeDef hdma_usart1_tx;
|
|
extern DMA_HandleTypeDef hdma_usart2_rx;
|
|
extern DMA_HandleTypeDef hdma_usart2_tx;
|
|
extern DMA_HandleTypeDef hdma_usart3_rx;
|
|
extern DMA_HandleTypeDef hdma_usart3_tx;
|
|
extern DMA_HandleTypeDef hdma_usart6_rx;
|
|
extern DMA_HandleTypeDef hdma_usart6_tx;
|
|
/* Private typedef -----------------------------------------------------------*/
|
/* USER CODE BEGIN TD */
|
|
/* USER CODE END TD */
|
|
/* Private define ------------------------------------------------------------*/
|
/* USER CODE BEGIN Define */
|
|
/* USER CODE END Define */
|
|
/* Private macro -------------------------------------------------------------*/
|
/* USER CODE BEGIN Macro */
|
|
/* USER CODE END Macro */
|
|
/* Private variables ---------------------------------------------------------*/
|
/* USER CODE BEGIN PV */
|
|
/* USER CODE END PV */
|
|
/* Private function prototypes -----------------------------------------------*/
|
/* USER CODE BEGIN PFP */
|
|
/* USER CODE END PFP */
|
|
/* External functions --------------------------------------------------------*/
|
/* USER CODE BEGIN ExternalFunctions */
|
|
/* USER CODE END ExternalFunctions */
|
|
/* USER CODE BEGIN 0 */
|
|
/* USER CODE END 0 */
|
|
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
|
/**
|
* Initializes the Global MSP.
|
*/
|
void HAL_MspInit(void)
|
{
|
|
/* USER CODE BEGIN MspInit 0 */
|
|
/* USER CODE END MspInit 0 */
|
|
__HAL_RCC_SYSCFG_CLK_ENABLE();
|
|
/* System interrupt init*/
|
/* PendSV_IRQn interrupt configuration */
|
HAL_NVIC_SetPriority(PendSV_IRQn, 15, 0);
|
|
/* USER CODE BEGIN MspInit 1 */
|
|
/* USER CODE END MspInit 1 */
|
}
|
|
/**
|
* @brief TIM_Base MSP Initialization
|
* This function configures the hardware resources used in this example
|
* @param htim_base: TIM_Base handle pointer
|
* @retval None
|
*/
|
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
|
{
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
if(htim_base->Instance==TIM1)
|
{
|
/* USER CODE BEGIN TIM1_MspInit 0 */
|
|
/* USER CODE END TIM1_MspInit 0 */
|
/* Peripheral clock enable */
|
__HAL_RCC_TIM1_CLK_ENABLE();
|
/* USER CODE BEGIN TIM1_MspInit 1 */
|
|
/* USER CODE END TIM1_MspInit 1 */
|
}
|
else if(htim_base->Instance==TIM2)
|
{
|
/* USER CODE BEGIN TIM2_MspInit 0 */
|
|
/* USER CODE END TIM2_MspInit 0 */
|
/* Peripheral clock enable */
|
__HAL_RCC_TIM2_CLK_ENABLE();
|
/* TIM2 interrupt Init */
|
HAL_NVIC_SetPriority(TIM2_IRQn, 5, 0);
|
HAL_NVIC_EnableIRQ(TIM2_IRQn);
|
/* USER CODE BEGIN TIM2_MspInit 1 */
|
|
/* USER CODE END TIM2_MspInit 1 */
|
}
|
else if(htim_base->Instance==TIM3)
|
{
|
/* USER CODE BEGIN TIM3_MspInit 0 */
|
|
/* USER CODE END TIM3_MspInit 0 */
|
/* Peripheral clock enable */
|
__HAL_RCC_TIM3_CLK_ENABLE();
|
/* TIM3 interrupt Init */
|
HAL_NVIC_SetPriority(TIM3_IRQn, 5, 0);
|
HAL_NVIC_EnableIRQ(TIM3_IRQn);
|
/* USER CODE BEGIN TIM3_MspInit 1 */
|
|
/* USER CODE END TIM3_MspInit 1 */
|
}
|
else if(htim_base->Instance==TIM4)
|
{
|
/* USER CODE BEGIN TIM4_MspInit 0 */
|
|
/* USER CODE END TIM4_MspInit 0 */
|
/* Peripheral clock enable */
|
__HAL_RCC_TIM4_CLK_ENABLE();
|
|
__HAL_RCC_GPIOD_CLK_ENABLE();
|
/**TIM4 GPIO Configuration
|
PD12 ------> TIM4_CH1
|
*/
|
GPIO_InitStruct.Pin = GPIO_PIN_12;
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
GPIO_InitStruct.Alternate = GPIO_AF2_TIM4;
|
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
|
|
/* TIM4 interrupt Init */
|
HAL_NVIC_SetPriority(TIM4_IRQn, 5, 0);
|
HAL_NVIC_EnableIRQ(TIM4_IRQn);
|
/* USER CODE BEGIN TIM4_MspInit 1 */
|
|
/* USER CODE END TIM4_MspInit 1 */
|
}
|
|
}
|
|
void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
|
{
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
if(htim->Instance==TIM1)
|
{
|
/* USER CODE BEGIN TIM1_MspPostInit 0 */
|
|
/* USER CODE END TIM1_MspPostInit 0 */
|
__HAL_RCC_GPIOE_CLK_ENABLE();
|
/**TIM1 GPIO Configuration
|
PE9 ------> TIM1_CH1
|
PE11 ------> TIM1_CH2
|
PE13 ------> TIM1_CH3
|
PE14 ------> TIM1_CH4
|
*/
|
GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_11|GPIO_PIN_13|GPIO_PIN_14;
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
GPIO_InitStruct.Alternate = GPIO_AF1_TIM1;
|
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
|
|
/* USER CODE BEGIN TIM1_MspPostInit 1 */
|
|
/* USER CODE END TIM1_MspPostInit 1 */
|
}
|
else if(htim->Instance==TIM2)
|
{
|
/* USER CODE BEGIN TIM2_MspPostInit 0 */
|
|
/* USER CODE END TIM2_MspPostInit 0 */
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
/**TIM2 GPIO Configuration
|
PA0 ------> TIM2_CH1
|
PA1 ------> TIM2_CH2
|
*/
|
GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_1;
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
GPIO_InitStruct.Alternate = GPIO_AF1_TIM2;
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
/* USER CODE BEGIN TIM2_MspPostInit 1 */
|
|
/* USER CODE END TIM2_MspPostInit 1 */
|
}
|
else if(htim->Instance==TIM3)
|
{
|
/* USER CODE BEGIN TIM3_MspPostInit 0 */
|
|
/* USER CODE END TIM3_MspPostInit 0 */
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
/**TIM3 GPIO Configuration
|
PA6 ------> TIM3_CH1
|
PA7 ------> TIM3_CH2
|
*/
|
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
GPIO_InitStruct.Alternate = GPIO_AF2_TIM3;
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
/* USER CODE BEGIN TIM3_MspPostInit 1 */
|
|
/* USER CODE END TIM3_MspPostInit 1 */
|
}
|
|
}
|
/**
|
* @brief TIM_Base MSP De-Initialization
|
* This function freeze the hardware resources used in this example
|
* @param htim_base: TIM_Base handle pointer
|
* @retval None
|
*/
|
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
|
{
|
if(htim_base->Instance==TIM1)
|
{
|
/* USER CODE BEGIN TIM1_MspDeInit 0 */
|
|
/* USER CODE END TIM1_MspDeInit 0 */
|
/* Peripheral clock disable */
|
__HAL_RCC_TIM1_CLK_DISABLE();
|
/* USER CODE BEGIN TIM1_MspDeInit 1 */
|
|
/* USER CODE END TIM1_MspDeInit 1 */
|
}
|
else if(htim_base->Instance==TIM2)
|
{
|
/* USER CODE BEGIN TIM2_MspDeInit 0 */
|
|
/* USER CODE END TIM2_MspDeInit 0 */
|
/* Peripheral clock disable */
|
__HAL_RCC_TIM2_CLK_DISABLE();
|
|
/* TIM2 interrupt DeInit */
|
HAL_NVIC_DisableIRQ(TIM2_IRQn);
|
/* USER CODE BEGIN TIM2_MspDeInit 1 */
|
|
/* USER CODE END TIM2_MspDeInit 1 */
|
}
|
else if(htim_base->Instance==TIM3)
|
{
|
/* USER CODE BEGIN TIM3_MspDeInit 0 */
|
|
/* USER CODE END TIM3_MspDeInit 0 */
|
/* Peripheral clock disable */
|
__HAL_RCC_TIM3_CLK_DISABLE();
|
|
/* TIM3 interrupt DeInit */
|
HAL_NVIC_DisableIRQ(TIM3_IRQn);
|
/* USER CODE BEGIN TIM3_MspDeInit 1 */
|
|
/* USER CODE END TIM3_MspDeInit 1 */
|
}
|
else if(htim_base->Instance==TIM4)
|
{
|
/* USER CODE BEGIN TIM4_MspDeInit 0 */
|
|
/* USER CODE END TIM4_MspDeInit 0 */
|
/* Peripheral clock disable */
|
__HAL_RCC_TIM4_CLK_DISABLE();
|
|
/**TIM4 GPIO Configuration
|
PD12 ------> TIM4_CH1
|
*/
|
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_12);
|
|
/* TIM4 interrupt DeInit */
|
HAL_NVIC_DisableIRQ(TIM4_IRQn);
|
/* USER CODE BEGIN TIM4_MspDeInit 1 */
|
|
/* USER CODE END TIM4_MspDeInit 1 */
|
}
|
|
}
|
|
/**
|
* @brief UART MSP Initialization
|
* This function configures the hardware resources used in this example
|
* @param huart: UART handle pointer
|
* @retval None
|
*/
|
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
|
{
|
GPIO_InitTypeDef GPIO_InitStruct = {0};
|
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
|
if(huart->Instance==UART4)
|
{
|
/* USER CODE BEGIN UART4_MspInit 0 */
|
|
/* USER CODE END UART4_MspInit 0 */
|
|
/** Initializes the peripherals clock
|
*/
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_UART4;
|
PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_D2PCLK1;
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
/* Peripheral clock enable */
|
__HAL_RCC_UART4_CLK_ENABLE();
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
/**UART4 GPIO Configuration
|
PA11 ------> UART4_RX
|
PA12 ------> UART4_TX
|
*/
|
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
GPIO_InitStruct.Alternate = GPIO_AF6_UART4;
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
/* UART4 DMA Init */
|
/* UART4_RX Init */
|
hdma_uart4_rx.Instance = DMA2_Stream0;
|
hdma_uart4_rx.Init.Request = DMA_REQUEST_UART4_RX;
|
hdma_uart4_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
hdma_uart4_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
hdma_uart4_rx.Init.MemInc = DMA_MINC_ENABLE;
|
hdma_uart4_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
hdma_uart4_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
hdma_uart4_rx.Init.Mode = DMA_CIRCULAR;
|
hdma_uart4_rx.Init.Priority = DMA_PRIORITY_LOW;
|
hdma_uart4_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
if (HAL_DMA_Init(&hdma_uart4_rx) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
__HAL_LINKDMA(huart,hdmarx,hdma_uart4_rx);
|
|
/* UART4 interrupt Init */
|
HAL_NVIC_SetPriority(UART4_IRQn, 5, 0);
|
HAL_NVIC_EnableIRQ(UART4_IRQn);
|
/* USER CODE BEGIN UART4_MspInit 1 */
|
|
/* USER CODE END UART4_MspInit 1 */
|
}
|
else if(huart->Instance==UART5)
|
{
|
/* USER CODE BEGIN UART5_MspInit 0 */
|
|
/* USER CODE END UART5_MspInit 0 */
|
|
/** Initializes the peripherals clock
|
*/
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_UART5;
|
PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_D2PCLK1;
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
/* Peripheral clock enable */
|
__HAL_RCC_UART5_CLK_ENABLE();
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
/**UART5 GPIO Configuration
|
PB12 ------> UART5_RX
|
PB13 ------> UART5_TX
|
*/
|
GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_13;
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
GPIO_InitStruct.Alternate = GPIO_AF14_UART5;
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
/* UART5 DMA Init */
|
/* UART5_RX Init */
|
hdma_uart5_rx.Instance = DMA2_Stream1;
|
hdma_uart5_rx.Init.Request = DMA_REQUEST_UART5_RX;
|
hdma_uart5_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
hdma_uart5_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
hdma_uart5_rx.Init.MemInc = DMA_MINC_ENABLE;
|
hdma_uart5_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
hdma_uart5_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
hdma_uart5_rx.Init.Mode = DMA_CIRCULAR;
|
hdma_uart5_rx.Init.Priority = DMA_PRIORITY_LOW;
|
hdma_uart5_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
if (HAL_DMA_Init(&hdma_uart5_rx) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
__HAL_LINKDMA(huart,hdmarx,hdma_uart5_rx);
|
|
/* UART5_TX Init */
|
hdma_uart5_tx.Instance = DMA2_Stream2;
|
hdma_uart5_tx.Init.Request = DMA_REQUEST_UART5_TX;
|
hdma_uart5_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
hdma_uart5_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
hdma_uart5_tx.Init.MemInc = DMA_MINC_ENABLE;
|
hdma_uart5_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
hdma_uart5_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
hdma_uart5_tx.Init.Mode = DMA_NORMAL;
|
hdma_uart5_tx.Init.Priority = DMA_PRIORITY_LOW;
|
hdma_uart5_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
if (HAL_DMA_Init(&hdma_uart5_tx) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
__HAL_LINKDMA(huart,hdmatx,hdma_uart5_tx);
|
|
/* UART5 interrupt Init */
|
HAL_NVIC_SetPriority(UART5_IRQn, 5, 0);
|
HAL_NVIC_EnableIRQ(UART5_IRQn);
|
/* USER CODE BEGIN UART5_MspInit 1 */
|
|
/* USER CODE END UART5_MspInit 1 */
|
}
|
else if(huart->Instance==USART1)
|
{
|
/* USER CODE BEGIN USART1_MspInit 0 */
|
|
/* USER CODE END USART1_MspInit 0 */
|
|
/** Initializes the peripherals clock
|
*/
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART1;
|
PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16CLKSOURCE_D2PCLK2;
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
/* Peripheral clock enable */
|
__HAL_RCC_USART1_CLK_ENABLE();
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
/**USART1 GPIO Configuration
|
PA9 ------> USART1_TX
|
PA10 ------> USART1_RX
|
*/
|
GPIO_InitStruct.Pin = GPIO_PIN_9|GPIO_PIN_10;
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART1;
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
/* USART1 DMA Init */
|
/* USART1_RX Init */
|
hdma_usart1_rx.Instance = DMA1_Stream0;
|
hdma_usart1_rx.Init.Request = DMA_REQUEST_USART1_RX;
|
hdma_usart1_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
hdma_usart1_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
hdma_usart1_rx.Init.MemInc = DMA_MINC_ENABLE;
|
hdma_usart1_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
hdma_usart1_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
hdma_usart1_rx.Init.Mode = DMA_CIRCULAR;
|
hdma_usart1_rx.Init.Priority = DMA_PRIORITY_LOW;
|
hdma_usart1_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
if (HAL_DMA_Init(&hdma_usart1_rx) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
__HAL_LINKDMA(huart,hdmarx,hdma_usart1_rx);
|
|
/* USART1_TX Init */
|
hdma_usart1_tx.Instance = DMA1_Stream1;
|
hdma_usart1_tx.Init.Request = DMA_REQUEST_USART1_TX;
|
hdma_usart1_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
hdma_usart1_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
hdma_usart1_tx.Init.MemInc = DMA_MINC_ENABLE;
|
hdma_usart1_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
hdma_usart1_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
hdma_usart1_tx.Init.Mode = DMA_NORMAL;
|
hdma_usart1_tx.Init.Priority = DMA_PRIORITY_LOW;
|
hdma_usart1_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
if (HAL_DMA_Init(&hdma_usart1_tx) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
__HAL_LINKDMA(huart,hdmatx,hdma_usart1_tx);
|
|
/* USART1 interrupt Init */
|
HAL_NVIC_SetPriority(USART1_IRQn, 5, 0);
|
HAL_NVIC_EnableIRQ(USART1_IRQn);
|
/* USER CODE BEGIN USART1_MspInit 1 */
|
|
/* USER CODE END USART1_MspInit 1 */
|
}
|
else if(huart->Instance==USART2)
|
{
|
/* USER CODE BEGIN USART2_MspInit 0 */
|
|
/* USER CODE END USART2_MspInit 0 */
|
|
/** Initializes the peripherals clock
|
*/
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART2;
|
PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_D2PCLK1;
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
/* Peripheral clock enable */
|
__HAL_RCC_USART2_CLK_ENABLE();
|
|
__HAL_RCC_GPIOA_CLK_ENABLE();
|
/**USART2 GPIO Configuration
|
PA2 ------> USART2_TX
|
PA3 ------> USART2_RX
|
*/
|
GPIO_InitStruct.Pin = GPIO_PIN_2|GPIO_PIN_3;
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
/* USART2 DMA Init */
|
/* USART2_RX Init */
|
hdma_usart2_rx.Instance = DMA1_Stream2;
|
hdma_usart2_rx.Init.Request = DMA_REQUEST_USART2_RX;
|
hdma_usart2_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
hdma_usart2_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
hdma_usart2_rx.Init.MemInc = DMA_MINC_ENABLE;
|
hdma_usart2_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
hdma_usart2_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
hdma_usart2_rx.Init.Mode = DMA_CIRCULAR;
|
hdma_usart2_rx.Init.Priority = DMA_PRIORITY_LOW;
|
hdma_usart2_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
if (HAL_DMA_Init(&hdma_usart2_rx) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
__HAL_LINKDMA(huart,hdmarx,hdma_usart2_rx);
|
|
/* USART2_TX Init */
|
hdma_usart2_tx.Instance = DMA1_Stream3;
|
hdma_usart2_tx.Init.Request = DMA_REQUEST_USART2_TX;
|
hdma_usart2_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
hdma_usart2_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
hdma_usart2_tx.Init.MemInc = DMA_MINC_ENABLE;
|
hdma_usart2_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
hdma_usart2_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
hdma_usart2_tx.Init.Mode = DMA_NORMAL;
|
hdma_usart2_tx.Init.Priority = DMA_PRIORITY_LOW;
|
hdma_usart2_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
if (HAL_DMA_Init(&hdma_usart2_tx) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
__HAL_LINKDMA(huart,hdmatx,hdma_usart2_tx);
|
|
/* USART2 interrupt Init */
|
HAL_NVIC_SetPriority(USART2_IRQn, 5, 0);
|
HAL_NVIC_EnableIRQ(USART2_IRQn);
|
/* USER CODE BEGIN USART2_MspInit 1 */
|
|
/* USER CODE END USART2_MspInit 1 */
|
}
|
else if(huart->Instance==USART3)
|
{
|
/* USER CODE BEGIN USART3_MspInit 0 */
|
|
/* USER CODE END USART3_MspInit 0 */
|
|
/** Initializes the peripherals clock
|
*/
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART3;
|
PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_D2PCLK1;
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
/* Peripheral clock enable */
|
__HAL_RCC_USART3_CLK_ENABLE();
|
|
__HAL_RCC_GPIOB_CLK_ENABLE();
|
/**USART3 GPIO Configuration
|
PB10 ------> USART3_TX
|
PB11 ------> USART3_RX
|
*/
|
GPIO_InitStruct.Pin = GPIO_PIN_10|GPIO_PIN_11;
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART3;
|
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
|
|
/* USART3 DMA Init */
|
/* USART3_RX Init */
|
hdma_usart3_rx.Instance = DMA1_Stream4;
|
hdma_usart3_rx.Init.Request = DMA_REQUEST_USART3_RX;
|
hdma_usart3_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
hdma_usart3_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
hdma_usart3_rx.Init.MemInc = DMA_MINC_ENABLE;
|
hdma_usart3_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
hdma_usart3_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
hdma_usart3_rx.Init.Mode = DMA_CIRCULAR;
|
hdma_usart3_rx.Init.Priority = DMA_PRIORITY_LOW;
|
hdma_usart3_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
if (HAL_DMA_Init(&hdma_usart3_rx) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
__HAL_LINKDMA(huart,hdmarx,hdma_usart3_rx);
|
|
/* USART3_TX Init */
|
hdma_usart3_tx.Instance = DMA1_Stream5;
|
hdma_usart3_tx.Init.Request = DMA_REQUEST_USART3_TX;
|
hdma_usart3_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
hdma_usart3_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
hdma_usart3_tx.Init.MemInc = DMA_MINC_ENABLE;
|
hdma_usart3_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
hdma_usart3_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
hdma_usart3_tx.Init.Mode = DMA_NORMAL;
|
hdma_usart3_tx.Init.Priority = DMA_PRIORITY_LOW;
|
hdma_usart3_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
if (HAL_DMA_Init(&hdma_usart3_tx) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
__HAL_LINKDMA(huart,hdmatx,hdma_usart3_tx);
|
|
/* USART3 interrupt Init */
|
HAL_NVIC_SetPriority(USART3_IRQn, 5, 0);
|
HAL_NVIC_EnableIRQ(USART3_IRQn);
|
/* USER CODE BEGIN USART3_MspInit 1 */
|
|
/* USER CODE END USART3_MspInit 1 */
|
}
|
else if(huart->Instance==USART6)
|
{
|
/* USER CODE BEGIN USART6_MspInit 0 */
|
|
/* USER CODE END USART6_MspInit 0 */
|
|
/** Initializes the peripherals clock
|
*/
|
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART6;
|
PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16CLKSOURCE_D2PCLK2;
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
/* Peripheral clock enable */
|
__HAL_RCC_USART6_CLK_ENABLE();
|
|
__HAL_RCC_GPIOC_CLK_ENABLE();
|
/**USART6 GPIO Configuration
|
PC6 ------> USART6_TX
|
PC7 ------> USART6_RX
|
*/
|
GPIO_InitStruct.Pin = GPIO_PIN_6|GPIO_PIN_7;
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
GPIO_InitStruct.Alternate = GPIO_AF7_USART6;
|
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
|
|
/* USART6 DMA Init */
|
/* USART6_RX Init */
|
hdma_usart6_rx.Instance = DMA1_Stream6;
|
hdma_usart6_rx.Init.Request = DMA_REQUEST_USART6_RX;
|
hdma_usart6_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
|
hdma_usart6_rx.Init.PeriphInc = DMA_PINC_DISABLE;
|
hdma_usart6_rx.Init.MemInc = DMA_MINC_ENABLE;
|
hdma_usart6_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
hdma_usart6_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
hdma_usart6_rx.Init.Mode = DMA_CIRCULAR;
|
hdma_usart6_rx.Init.Priority = DMA_PRIORITY_LOW;
|
hdma_usart6_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
if (HAL_DMA_Init(&hdma_usart6_rx) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
__HAL_LINKDMA(huart,hdmarx,hdma_usart6_rx);
|
|
/* USART6_TX Init */
|
hdma_usart6_tx.Instance = DMA1_Stream7;
|
hdma_usart6_tx.Init.Request = DMA_REQUEST_USART6_TX;
|
hdma_usart6_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
|
hdma_usart6_tx.Init.PeriphInc = DMA_PINC_DISABLE;
|
hdma_usart6_tx.Init.MemInc = DMA_MINC_ENABLE;
|
hdma_usart6_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
|
hdma_usart6_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
|
hdma_usart6_tx.Init.Mode = DMA_NORMAL;
|
hdma_usart6_tx.Init.Priority = DMA_PRIORITY_LOW;
|
hdma_usart6_tx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
|
if (HAL_DMA_Init(&hdma_usart6_tx) != HAL_OK)
|
{
|
Error_Handler();
|
}
|
|
__HAL_LINKDMA(huart,hdmatx,hdma_usart6_tx);
|
|
/* USART6 interrupt Init */
|
HAL_NVIC_SetPriority(USART6_IRQn, 5, 0);
|
HAL_NVIC_EnableIRQ(USART6_IRQn);
|
/* USER CODE BEGIN USART6_MspInit 1 */
|
|
/* USER CODE END USART6_MspInit 1 */
|
}
|
|
}
|
|
/**
|
* @brief UART MSP De-Initialization
|
* This function freeze the hardware resources used in this example
|
* @param huart: UART handle pointer
|
* @retval None
|
*/
|
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
|
{
|
if(huart->Instance==UART4)
|
{
|
/* USER CODE BEGIN UART4_MspDeInit 0 */
|
|
/* USER CODE END UART4_MspDeInit 0 */
|
/* Peripheral clock disable */
|
__HAL_RCC_UART4_CLK_DISABLE();
|
|
/**UART4 GPIO Configuration
|
PA11 ------> UART4_RX
|
PA12 ------> UART4_TX
|
*/
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
|
|
/* UART4 DMA DeInit */
|
HAL_DMA_DeInit(huart->hdmarx);
|
|
/* UART4 interrupt DeInit */
|
HAL_NVIC_DisableIRQ(UART4_IRQn);
|
/* USER CODE BEGIN UART4_MspDeInit 1 */
|
|
/* USER CODE END UART4_MspDeInit 1 */
|
}
|
else if(huart->Instance==UART5)
|
{
|
/* USER CODE BEGIN UART5_MspDeInit 0 */
|
|
/* USER CODE END UART5_MspDeInit 0 */
|
/* Peripheral clock disable */
|
__HAL_RCC_UART5_CLK_DISABLE();
|
|
/**UART5 GPIO Configuration
|
PB12 ------> UART5_RX
|
PB13 ------> UART5_TX
|
*/
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_12|GPIO_PIN_13);
|
|
/* UART5 DMA DeInit */
|
HAL_DMA_DeInit(huart->hdmarx);
|
HAL_DMA_DeInit(huart->hdmatx);
|
|
/* UART5 interrupt DeInit */
|
HAL_NVIC_DisableIRQ(UART5_IRQn);
|
/* USER CODE BEGIN UART5_MspDeInit 1 */
|
|
/* USER CODE END UART5_MspDeInit 1 */
|
}
|
else if(huart->Instance==USART1)
|
{
|
/* USER CODE BEGIN USART1_MspDeInit 0 */
|
|
/* USER CODE END USART1_MspDeInit 0 */
|
/* Peripheral clock disable */
|
__HAL_RCC_USART1_CLK_DISABLE();
|
|
/**USART1 GPIO Configuration
|
PA9 ------> USART1_TX
|
PA10 ------> USART1_RX
|
*/
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9|GPIO_PIN_10);
|
|
/* USART1 DMA DeInit */
|
HAL_DMA_DeInit(huart->hdmarx);
|
HAL_DMA_DeInit(huart->hdmatx);
|
|
/* USART1 interrupt DeInit */
|
HAL_NVIC_DisableIRQ(USART1_IRQn);
|
/* USER CODE BEGIN USART1_MspDeInit 1 */
|
|
/* USER CODE END USART1_MspDeInit 1 */
|
}
|
else if(huart->Instance==USART2)
|
{
|
/* USER CODE BEGIN USART2_MspDeInit 0 */
|
|
/* USER CODE END USART2_MspDeInit 0 */
|
/* Peripheral clock disable */
|
__HAL_RCC_USART2_CLK_DISABLE();
|
|
/**USART2 GPIO Configuration
|
PA2 ------> USART2_TX
|
PA3 ------> USART2_RX
|
*/
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2|GPIO_PIN_3);
|
|
/* USART2 DMA DeInit */
|
HAL_DMA_DeInit(huart->hdmarx);
|
HAL_DMA_DeInit(huart->hdmatx);
|
|
/* USART2 interrupt DeInit */
|
HAL_NVIC_DisableIRQ(USART2_IRQn);
|
/* USER CODE BEGIN USART2_MspDeInit 1 */
|
|
/* USER CODE END USART2_MspDeInit 1 */
|
}
|
else if(huart->Instance==USART3)
|
{
|
/* USER CODE BEGIN USART3_MspDeInit 0 */
|
|
/* USER CODE END USART3_MspDeInit 0 */
|
/* Peripheral clock disable */
|
__HAL_RCC_USART3_CLK_DISABLE();
|
|
/**USART3 GPIO Configuration
|
PB10 ------> USART3_TX
|
PB11 ------> USART3_RX
|
*/
|
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_10|GPIO_PIN_11);
|
|
/* USART3 DMA DeInit */
|
HAL_DMA_DeInit(huart->hdmarx);
|
HAL_DMA_DeInit(huart->hdmatx);
|
|
/* USART3 interrupt DeInit */
|
HAL_NVIC_DisableIRQ(USART3_IRQn);
|
/* USER CODE BEGIN USART3_MspDeInit 1 */
|
|
/* USER CODE END USART3_MspDeInit 1 */
|
}
|
else if(huart->Instance==USART6)
|
{
|
/* USER CODE BEGIN USART6_MspDeInit 0 */
|
|
/* USER CODE END USART6_MspDeInit 0 */
|
/* Peripheral clock disable */
|
__HAL_RCC_USART6_CLK_DISABLE();
|
|
/**USART6 GPIO Configuration
|
PC6 ------> USART6_TX
|
PC7 ------> USART6_RX
|
*/
|
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_6|GPIO_PIN_7);
|
|
/* USART6 DMA DeInit */
|
HAL_DMA_DeInit(huart->hdmarx);
|
HAL_DMA_DeInit(huart->hdmatx);
|
|
/* USART6 interrupt DeInit */
|
HAL_NVIC_DisableIRQ(USART6_IRQn);
|
/* USER CODE BEGIN USART6_MspDeInit 1 */
|
|
/* USER CODE END USART6_MspDeInit 1 */
|
}
|
|
}
|
|
/* USER CODE BEGIN 1 */
|
|
/* USER CODE END 1 */
|
