/**
|
**********************************************************************************************************************
|
* @file stm32h7xx_hal_sdio.h
|
* @author MCD Application Team
|
* @brief Header file of SDIO HAL module.
|
**********************************************************************************************************************
|
* @attention
|
*
|
* Copyright (c) 2017 STMicroelectronics.
|
* All rights reserved.
|
*
|
* This software is licensed under terms that can be found in the LICENSE file
|
* in the root directory of this software component.
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
*
|
**********************************************************************************************************************
|
*/
|
|
/* Define to prevent recursive inclusion -----------------------------------------------------------------------------*/
|
#ifndef STM32H7xx_HAL_SDIO_H
|
#define STM32H7xx_HAL_SDIO_H
|
|
#ifdef __cplusplus
|
extern "C" {
|
#endif
|
|
/* Includes ----------------------------------------------------------------------------------------------------------*/
|
#include "stm32h7xx_ll_sdmmc.h"
|
|
/** @addtogroup STM32U5xx_HAL_Driver
|
* @{
|
*/
|
#if defined (SDMMC1) || defined (SDMMC2)
|
|
/** @defgroup SDIO SDIO
|
* @brief SDIO HAL module driver
|
* @{
|
*/
|
|
/* Exported types ----------------------------------------------------------------------------------------------------*/
|
/** @defgroup SDIO_Exported_Types SDIO Exported Types
|
* @{
|
*/
|
|
/** @defgroup SDIO_Exported_Types_Group1 SDIO State enumeration structure
|
* @{
|
|
*/
|
typedef enum
|
{
|
HAL_SDIO_STATE_RESET = 0x00U, /*!< SDIO not yet initialized or disabled */
|
HAL_SDIO_STATE_READY = 0x01U, /*!< SDIO initialized and ready for us */
|
HAL_SDIO_STATE_BUSY = 0x02U, /*!< SDIO process ongoing */
|
} HAL_SDIO_StateTypeDef;
|
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Types_Group2 SDIO Handle and Structure definition
|
* @{
|
*/
|
/**
|
* @brief SDIO Card Common Control Register Structure definition
|
*/
|
typedef struct
|
{
|
uint8_t sdio_revision; /*!< SDIO revision */
|
uint8_t cccr_revision; /*!< CCCR version */
|
uint8_t sd_spec_revision; /*!< SD revision */
|
uint8_t bus_width_8Bit; /*!< SDIO bus width 8 bit support */
|
uint32_t card_capability; /*!< SDIO card capability */
|
uint32_t commonCISPointer; /*!< point to common CIS */
|
} HAL_SDIO_CCCR_TypeDef;
|
|
/**
|
* @brief sdio card FBR register(Function Basic Register)
|
*/
|
typedef struct
|
{
|
uint8_t flags; /*!< SDIO current IO flags */
|
uint8_t ioStdFunctionCode; /*!< SDIO current IO standard function code */
|
uint8_t ioExtFunctionCode; /*!< SDIO current IO extended function code */
|
uint32_t ioPointerToCIS; /*!< SDIO current IO pointer to CIS */
|
uint32_t ioPointerToCSA; /*!< SDIO current IO pointer to CSA */
|
} HAL_SDIO_FBR_t;
|
|
/**
|
* @brief SDIO CMD52 Structure definition
|
*/
|
typedef struct
|
{
|
uint32_t Reg_Addr; /*!< This is the address of the byte of data inside of the selected function to read or write */
|
uint8_t ReadAfterWrite; /*!< This is the read after write flag, it is used for write access only. */
|
uint8_t IOFunctionNbr; /*!< The number of the function within the IO card you wish to read or write */
|
} HAL_SDIO_DirectCmd_TypeDef;
|
|
/**
|
* @brief SDIO CMD53 Structure definition
|
*/
|
typedef struct
|
{
|
uint32_t Reg_Addr; /*!< This is the address of the byte of data inside of the selected function to read or write */
|
uint32_t OpCode; /*!< Read/Write operation mode */
|
uint32_t Block_Mode; /*!< Bytes or Blocks mode */
|
uint32_t IOFunctionNbr; /*!< The number of the function within the IO card you wish to read or write */
|
} HAL_SDIO_ExtendedCmd_TypeDef;
|
|
#define SDIO_InitTypeDef SDMMC_InitTypeDef
|
#define SDIO_TypeDef SDMMC_TypeDef
|
|
/**
|
* @brief SDIO handle Structure definition
|
*/
|
typedef struct __SDIO_HandleTypeDef
|
{
|
SDIO_TypeDef *Instance; /*!< SDIO registers base address */
|
|
SDIO_InitTypeDef Init; /*!< SDIO required parameters */
|
|
HAL_LockTypeDef Lock; /*!< SDIO locking object */
|
|
uint8_t *pTxBuffPtr; /*!< Pointer to SDIO Tx transfer Buffer */
|
|
uint32_t TxXferSize; /*!< SDIO Tx Transfer size */
|
|
uint8_t *pRxBuffPtr; /*!< Pointer to SDIO Rx transfer Buffer */
|
|
uint32_t RxXferSize; /*!< SDIO Rx Transfer size */
|
|
uint32_t remaining_data; /*!< Remaining data to transfer */
|
|
uint32_t next_data_addr; /*!< SDIO Next data address */
|
|
__IO uint32_t next_reg_addr; /*!< SDIO Next register address */
|
|
uint16_t block_size; /*!< SDIO Block size */
|
|
__IO uint32_t Context; /*!< SDIO transfer context */
|
|
__IO HAL_SDIO_StateTypeDef State; /*!< SDIO card State */
|
|
__IO uint32_t ErrorCode; /*!< SDIO Card Error codes */
|
|
uint8_t IOFunctionMask; /*!< SDIO used to record current enabled io interrupt */
|
|
volatile uint8_t IOInterruptNbr; /*!< SDIO used to record total enabled io interrupt numbers */
|
|
void (* SDIO_IOFunction_Callback[SDIO_MAX_IO_NUMBER])(struct __SDIO_HandleTypeDef *hsdio, uint32_t func);
|
|
#if defined (USE_HAL_SDIO_REGISTER_CALLBACKS) && (USE_HAL_SDIO_REGISTER_CALLBACKS == 1U)
|
void (* TxCpltCallback)(struct __SDIO_HandleTypeDef *hsdio);
|
void (* RxCpltCallback)(struct __SDIO_HandleTypeDef *hsdio);
|
void (* ErrorCallback)(struct __SDIO_HandleTypeDef *hsdio);
|
void (* MspInitCallback)(struct __SDIO_HandleTypeDef *hsdio);
|
void (* MspDeInitCallback)(struct __SDIO_HandleTypeDef *hsdio);
|
#endif /* USE_HAL_SDIO_REGISTER_CALLBACKS */
|
|
#if (USE_SDIO_TRANSCEIVER != 0U)
|
void (* DriveTransceiver_1_8V_Callback)(struct __SDIO_HandleTypeDef *hsdio, FlagStatus status);
|
#endif /* USE_SDIO_TRANSCEIVER */
|
|
HAL_StatusTypeDef(* SDIO_IdentifyCard)(struct __SDIO_HandleTypeDef *hsdio);
|
|
} SDIO_HandleTypeDef;
|
|
/**
|
* @}
|
*/
|
#if defined (USE_HAL_SDIO_REGISTER_CALLBACKS) && (USE_HAL_SDIO_REGISTER_CALLBACKS == 1U)
|
/** @defgroup SDIO_Exported_Types_Group3 SDIO Callback ID enumeration definition
|
* @{
|
*/
|
typedef enum
|
{
|
HAL_SDIO_TX_CPLT_CB_ID = 0x00U, /*!< SDIO Tx Complete Callback ID */
|
HAL_SDIO_RX_CPLT_CB_ID = 0x01U, /*!< SDIO Rx Complete Callback ID */
|
HAL_SDIO_ERROR_CB_ID = 0x02U, /*!< SDIO Error Callback ID */
|
HAL_SDIO_MSP_INIT_CB_ID = 0x10U, /*!< SDIO MspInit Callback ID */
|
HAL_SDIO_MSP_DEINIT_CB_ID = 0x11U /*!< SDIO MspDeInit Callback ID */
|
} HAL_SDIO_CallbackIDTypeDef;
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Types_Group4 SDIO Callback pointer definition
|
* @{
|
*/
|
typedef void (*pSDIO_CallbackTypeDef)(SDIO_HandleTypeDef *hsdio);
|
/**
|
* @}
|
*/
|
#endif /* USE_HAL_SDIO_REGISTER_CALLBACKS */
|
|
#if (USE_SDIO_TRANSCEIVER != 0U)
|
typedef void (*pSDIO_TransceiverCallbackTypeDef)(SDIO_HandleTypeDef *hsdio, FlagStatus status);
|
#endif /* USE_SDIO_TRANSCEIVER */
|
|
typedef HAL_StatusTypeDef(*pSDIO_IdentifyCardCallbackTypeDef)(SDIO_HandleTypeDef *hsdio);
|
typedef void (*HAL_SDIO_IOFunction_CallbackTypeDef)(SDIO_HandleTypeDef *hsdio, uint32_t func);
|
/**
|
* @}
|
*/
|
|
/* Exported constants ------------------------------------------------------------------------------------------------*/
|
/** @defgroup SDIO_Exported_Constants SDIO Exported Constants
|
* @{
|
*/
|
|
/** @defgroup SDIO_Exported_Constansts_Group1 SDIO Error status Structure definition
|
* @{
|
*/
|
#define HAL_SDIO_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */
|
#define HAL_SDIO_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */
|
#define HAL_SDIO_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */
|
#define HAL_SDIO_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */
|
#define HAL_SDIO_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */
|
#define HAL_SDIO_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */
|
#define HAL_SDIO_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Constansts_Group2 SDIO context enumeration
|
* @{
|
*/
|
#define SDIO_CONTEXT_NONE 0x00U /*!< None */
|
#define SDIO_CONTEXT_READ_SINGLE_BLOCK 0x01U /*!< Read single block operation */
|
#define SDIO_CONTEXT_READ_MULTIPLE_BLOCK 0x02U /*!< Read multiple blocks operation */
|
#define SDIO_CONTEXT_WRITE_SINGLE_BLOCK 0x10U /*!< Write single block operation */
|
#define SDIO_CONTEXT_WRITE_MULTIPLE_BLOCK 0x20U /*!< Write multiple blocks operation */
|
#define SDIO_CONTEXT_IT 0x08U /*!< Process in Interrupt mode */
|
#define SDIO_CONTEXT_DMA 0x80U /*!< Process in DMA mode */
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Constansts_Group3 SDIO Block mode enumeration
|
* @{
|
*/
|
#define HAL_SDIO_MODE_BYTE SDMMC_SDIO_MODE_BYTE
|
#define HAL_SDIO_MODE_BLOCK SDMMC_SDIO_MODE_BLOCK
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Constansts_Group4 SDIO operation code enumeration
|
* @{
|
*/
|
#define HAL_SDIO_OP_CODE_NO_INC SDMMC_SDIO_NO_INC
|
#define HAL_SDIO_OP_CODE_AUTO_INC SDMMC_SDIO_AUTO_INC
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Constansts_Group5 SDIO Read After Write(RAW) enumeration
|
* @{
|
*/
|
#define HAL_SDIO_WRITE_ONLY SDMMC_SDIO_WO /*!< SDIO Write only */
|
#define HAL_SDIO_READ_AFTER_WRITE SDMMC_SDIO_RAW /*!< SDIO Read after write */
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Constansts_Group6 SDIO wire mode enumeration
|
* @{
|
*/
|
#define HAL_SDIO_1_WIRE_MODE 0U /*!< SDIO wire support 1 wire */
|
#define HAL_SDIO_4_WIRES_MODE 1U /*!< SDIO wire support 4 wires */
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Constansts_Group7 SDIO Data block size enumeration
|
* @{
|
*/
|
#define HAL_SDIO_DATA_BLOCK_SIZE_1BYTE 1U /*!< SDIO data block size 1 byte */
|
#define HAL_SDIO_DATA_BLOCK_SIZE_2BYTE 2U /*!< SDIO data block size 2 byte */
|
#define HAL_SDIO_DATA_BLOCK_SIZE_4BYTE 4U /*!< SDIO data block size 4 byte */
|
#define HAL_SDIO_DATA_BLOCK_SIZE_8BYTE 8U /*!< SDIO data block size 8 byte */
|
#define HAL_SDIO_DATA_BLOCK_SIZE_16BYTE 16U /*!< SDIO data block size 16 byte */
|
#define HAL_SDIO_DATA_BLOCK_SIZE_32BYTE 32U /*!< SDIO data block size 32 byte */
|
#define HAL_SDIO_DATA_BLOCK_SIZE_64BYTE 64U /*!< SDIO data block size 64 byte */
|
#define HAL_SDIO_DATA_BLOCK_SIZE_128BYTE 128U /*!< SDIO data block size 128 byte */
|
#define HAL_SDIO_DATA_BLOCK_SIZE_256BYTE 256U /*!< SDIO data block size 256 byte */
|
#define HAL_SDIO_DATA_BLOCK_SIZE_512BYTE 512U /*!< SDIO data block size 512 byte */
|
#define HAL_SDIO_DATA_BLOCK_SIZE_1024BYTE 1024U /*!< SDIO data block size 1024 byte */
|
#define HAL_SDIO_DATA_BLOCK_SIZE_2048BYTE 2048U /*!< SDIO data block size 2048 byte */
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Constansts_Group8 SDIO Bus Width enumeration
|
* @{
|
*/
|
#define HAL_SDIO_BUS_WIDTH_8BIT_NOT_SUPPORTED 0U /*!< SDIO bus width 8 bit is not supported */
|
#define HAL_SDIO_BUS_WIDTH_8BIT_SUPPORTED 1U /*!< SDIO bus width 8 bit is supported */
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Constansts_Group9 SDIO Data rate definitions
|
* @{
|
*/
|
#define HAL_SDIOS_DATA_RATE_SDR12 0U /*!< SDIO Data rate SDR12 */
|
#define HAL_SDIOS_DATA_RATE_SDR25 1U /*!< SDIO Data rate SDR25 */
|
#define HAL_SDIOS_DATA_RATE_SDR50 2U /*!< SDIO Data rate SDR50 */
|
#define HAL_SDIOS_DATA_RATE_DDR50 3U /*!< SDIO Data rate DDR50 */
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Constansts_Group10 SDIO Functions definitions
|
* @{
|
*/
|
#define HAL_SDIO_FUNCTION_0 0U /*!< SDIO function 0 */
|
#define HAL_SDIO_FUNCTION_1 1U /*!< SDIO function 1 */
|
#define HAL_SDIO_FUNCTION_2 2U /*!< SDIO function 2 */
|
#define HAL_SDIO_FUNCTION_3 3U /*!< SDIO function 3 */
|
#define HAL_SDIO_FUNCTION_4 4U /*!< SDIO function 4 */
|
#define HAL_SDIO_FUNCTION_5 5U /*!< SDIO function 5 */
|
#define HAL_SDIO_FUNCTION_6 6U /*!< SDIO function 6 */
|
#define HAL_SDIO_FUNCTION_7 7U /*!< SDIO function 7 */
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Constansts_Group11 SDIO FBR definitions
|
* @{
|
*/
|
#define HAL_SDIO_FBR_SUPPORT_CSA 1U /*!< SDIO function support CSA */
|
#define HAL_SDIO_FBR_SUPPORT_POWER_SELECTION 1U /*!< SDIO function support power selection */
|
/**
|
* @}
|
*/
|
|
/**
|
* @}
|
*/
|
/* Exported macro ----------------------------------------------------------------------------------------------------*/
|
/** @defgroup SDIO_Exported_macros SDIO Exported Macros
|
* @brief macros to handle interrupts and specific clock configurations
|
* @{
|
*/
|
/**
|
* @brief Enable the SDIO device interrupt.
|
* @param __HANDLE__ SDIO Handle.
|
* @param __INTERRUPT__ specifies the SDMMC interrupt sources to be enabled.
|
* This parameter can be one or a combination of @ref SDMMC_LL_Interrupt_sources.
|
* @retval None
|
*/
|
#define __HAL_SDIO_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
|
/**
|
* @brief Disable the SDIO device interrupt.
|
* @param __HANDLE__ SDIO Handle.
|
* @param __INTERRUPT__ specifies the SDMMC interrupt sources to be disabled.
|
* This parameter can be one or a combination of @ref SDMMC_LL_Interrupt_sources.
|
* @retval None
|
*/
|
#define __HAL_SDIO_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
|
/**
|
* @brief Check whether the specified SDIO flag is set or not.
|
* @param __HANDLE__ SDIO Handle.
|
* @param __FLAG__ specifies the flag to check.
|
* This parameter can be one of @ref SDMMC_LL_Flags.
|
* @retval The new state of SDIO FLAG (SET or RESET).
|
*/
|
#define __HAL_SDIO_GET_FLAG(__HANDLE__, __FLAG__) __SDMMC_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
|
|
/**
|
* @brief Clear the SDIO's pending flags.
|
* @param __HANDLE__ SDIO Handle.
|
* @param __FLAG__ specifies the flag to clear.
|
* This parameter can be one or a combination of @ref SDMMC_LL_Flags.
|
* @retval None
|
*/
|
#define __HAL_SDIO_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDMMC_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
|
|
/**
|
* @brief Check whether the specified SDIO interrupt has occurred or not.
|
* @param __HANDLE__ SDIO Handle.
|
* @param __INTERRUPT__ specifies the SDMMC interrupt source to check.
|
* This parameter can be one of @ref SDMMC_LL_Interrupt_sources.
|
* @retval The new state of SDIO IT (SET or RESET).
|
*/
|
#define __HAL_SDIO_GET_IT(__HANDLE__, __INTERRUPT__) __SDMMC_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
|
|
/**
|
* @brief Checks whether the specified SDIO interrupt is enabled or not.
|
* @param __HANDLE__ : SDIO handle.
|
* @param __INTERRUPT__ : specifies the SDMMC interrupt source to check.
|
* @retval The state of SDIO IT (SET or RESET).
|
*/
|
#define __HAL_SDIO_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) \
|
__SDMMC_GET_IT_SOURCE((__HANDLE__)->Instance, (__INTERRUPT__))
|
/**
|
* @}
|
*/
|
|
/* Exported functions ------------------------------------------------------------------------------------------------*/
|
/** @defgroup SDIO_Exported_Functions SDIO Exported Functions
|
* @{
|
*/
|
/** @defgroup SDIO_Exported_Functions_Group1 Initialization and de-initialization functions
|
* @{
|
*/
|
HAL_StatusTypeDef HAL_SDIO_Init(SDIO_HandleTypeDef *hsdio);
|
HAL_StatusTypeDef HAL_SDIO_DeInit(SDIO_HandleTypeDef *hsdio);
|
|
void HAL_SDIO_MspInit(SDIO_HandleTypeDef *hsdio);
|
void HAL_SDIO_MspDeInit(SDIO_HandleTypeDef *hsdio);
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Functions_Group2 Peripheral Control functions
|
* @{
|
*/
|
HAL_StatusTypeDef HAL_SDIO_SetDataBusWidth(SDIO_HandleTypeDef *hsdio, uint32_t BusWide);
|
HAL_StatusTypeDef HAL_SDIO_ConfigFrequency(SDIO_HandleTypeDef *hsdio, uint32_t ClockSpeed);
|
|
HAL_StatusTypeDef HAL_SDIO_SetBlockSize(SDIO_HandleTypeDef *hsdio, uint8_t function_nbr, uint16_t BlockSize);
|
HAL_StatusTypeDef HAL_SDIO_SetSpeedMode(SDIO_HandleTypeDef *hsdio, uint32_t DataRate);
|
|
HAL_StatusTypeDef HAL_SDIO_CardReset(SDIO_HandleTypeDef *hsdio);
|
HAL_StatusTypeDef HAL_SDIO_GetCardCommonControlRegister(SDIO_HandleTypeDef *hsdio, HAL_SDIO_CCCR_TypeDef *pCccr);
|
HAL_StatusTypeDef HAL_SDIO_GetCardFBRRegister(SDIO_HandleTypeDef *hsdio, HAL_SDIO_FBR_t *pFbr);
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Functions_Group3 Process functions
|
* @{
|
*/
|
HAL_StatusTypeDef HAL_SDIO_ReadDirect(SDIO_HandleTypeDef *hsdio, HAL_SDIO_DirectCmd_TypeDef *Argument, uint8_t *pData);
|
HAL_StatusTypeDef HAL_SDIO_WriteDirect(SDIO_HandleTypeDef *hsdio, HAL_SDIO_DirectCmd_TypeDef *Argument, uint8_t Data);
|
|
HAL_StatusTypeDef HAL_SDIO_ReadExtended(SDIO_HandleTypeDef *hsdio, HAL_SDIO_ExtendedCmd_TypeDef *Argument,
|
uint8_t *pData, uint32_t Size_byte, uint32_t Timeout_Ms);
|
|
HAL_StatusTypeDef HAL_SDIO_WriteExtended(SDIO_HandleTypeDef *hsdio, HAL_SDIO_ExtendedCmd_TypeDef *Argument,
|
uint8_t *pData, uint32_t Size_byte, uint32_t Timeout_Ms);
|
|
HAL_StatusTypeDef HAL_SDIO_ReadExtended_DMA(SDIO_HandleTypeDef *hsdio, HAL_SDIO_ExtendedCmd_TypeDef *Argument,
|
uint8_t *pData, uint32_t Size_byte);
|
|
HAL_StatusTypeDef HAL_SDIO_WriteExtended_DMA(SDIO_HandleTypeDef *hsdio, HAL_SDIO_ExtendedCmd_TypeDef *Argument,
|
uint8_t *pData, uint32_t Size_byte);
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Functions_Group4 IRQHandler and callback functions
|
* @{
|
*/
|
void HAL_SDIO_IRQHandler(SDIO_HandleTypeDef *hsdio);
|
|
void HAL_SDIO_TxCpltCallback(SDIO_HandleTypeDef *hsdio);
|
void HAL_SDIO_RxCpltCallback(SDIO_HandleTypeDef *hsdio);
|
void HAL_SDIO_ErrorCallback(SDIO_HandleTypeDef *hsdio);
|
void HAL_SDIO_IOFunctionCallback(SDIO_HandleTypeDef *hsdio, uint32_t func);
|
#if (USE_SDIO_TRANSCEIVER != 0U)
|
/* Callback to switch in 1.8V mode */
|
void HAL_SDIO_DriveTransceiver_1_8V_Callback(SDIO_HandleTypeDef *hsdio, FlagStatus status);
|
#endif /* USE_SDIO_TRANSCEIVER */
|
|
#if defined (USE_HAL_SDIO_REGISTER_CALLBACKS) && (USE_HAL_SDIO_REGISTER_CALLBACKS == 1U)
|
HAL_StatusTypeDef HAL_SDIO_RegisterCallback(SDIO_HandleTypeDef *hsdio, HAL_SDIO_CallbackIDTypeDef CallbackID,
|
pSDIO_CallbackTypeDef pCallback);
|
|
HAL_StatusTypeDef HAL_SDIO_UnRegisterCallback(SDIO_HandleTypeDef *hsdio, HAL_SDIO_CallbackIDTypeDef CallbackID);
|
#endif /* USE_HAL_SDIO_REGISTER_CALLBACKS */
|
|
#if (USE_SDIO_TRANSCEIVER != 0U)
|
HAL_StatusTypeDef HAL_SDIO_RegisterTransceiverCallback(SDIO_HandleTypeDef *hsdio,
|
pSDIO_TransceiverCallbackTypeDef pCallback);
|
HAL_StatusTypeDef HAL_SDIO_UnRegisterTransceiverCallback(SDIO_HandleTypeDef *hsdio);
|
#endif /* USE_SDIO_TRANSCEIVER */
|
|
HAL_StatusTypeDef HAL_SDIO_RegisterIOFunctionCallback(SDIO_HandleTypeDef *hsdio, uint32_t IOFunction,
|
HAL_SDIO_IOFunction_CallbackTypeDef pCallback);
|
|
HAL_StatusTypeDef HAL_SDIO_RegisterIdentifyCardCallback(SDIO_HandleTypeDef *hsdio,
|
pSDIO_IdentifyCardCallbackTypeDef pCallback);
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Functions_Group5 Peripheral State and Errors functions
|
* @{
|
*/
|
HAL_SDIO_StateTypeDef HAL_SDIO_GetState(const SDIO_HandleTypeDef *hsdio);
|
uint32_t HAL_SDIO_GetError(const SDIO_HandleTypeDef *hsdio);
|
/**
|
* @}
|
*/
|
|
/** @defgroup SDIO_Exported_Functions_Group6 Peripheral IO interrupt
|
* @{
|
*/
|
HAL_StatusTypeDef HAL_SDIO_EnableIOFunctionInterrupt(SDIO_HandleTypeDef *hsdio, uint32_t IOFunction);
|
HAL_StatusTypeDef HAL_SDIO_DisableIOFunctionInterrupt(SDIO_HandleTypeDef *hsdio, uint32_t IOFunction);
|
|
HAL_StatusTypeDef HAL_SDIO_EnableIOFunction(SDIO_HandleTypeDef *hsdio, uint32_t IOFunction);
|
HAL_StatusTypeDef HAL_SDIO_DisableIOFunction(SDIO_HandleTypeDef *hsdio, uint32_t IOFunction);
|
|
HAL_StatusTypeDef HAL_SDIO_SelectIOFunction(SDIO_HandleTypeDef *hsdio, uint32_t IOFunction);
|
HAL_StatusTypeDef HAL_SDIO_AbortIOFunction(SDIO_HandleTypeDef *hsdio, uint32_t IOFunction);
|
|
HAL_StatusTypeDef HAL_SDIO_EnableIOAsynInterrupt(SDIO_HandleTypeDef *hsdio);
|
HAL_StatusTypeDef HAL_SDIO_DisableIOAsynInterrupt(SDIO_HandleTypeDef *hsdio);
|
|
/**
|
* @}
|
*/
|
|
/* Private types -----------------------------------------------------------------------------------------------------*/
|
/** @defgroup SDIO_Private_Types SDIO Private Types
|
* @{
|
*/
|
|
/**
|
* @}
|
*/
|
|
/* Private defines ---------------------------------------------------------------------------------------------------*/
|
/** @defgroup SDIO_Private_Defines SDIO Private Defines
|
* @{
|
*/
|
|
/**
|
* @}
|
*/
|
|
/* Private variables -------------------------------------------------------------------------------------------------*/
|
/** @defgroup SDIO_Private_Variables SDIO Private Variables
|
* @{
|
*/
|
|
/**
|
* @}
|
*/
|
|
/* Private constants -------------------------------------------------------------------------------------------------*/
|
/** @defgroup SDIO_Private_Constants SDIO Private Constants
|
* @{
|
*/
|
|
/**
|
* @}
|
*/
|
|
/* Private macros ----------------------------------------------------------------------------------------------------*/
|
/** @defgroup SDIO_Private_Macros SDIO Private Macros
|
* @{
|
*/
|
|
/**
|
* @}
|
*/
|
|
/* Private functions prototypes --------------------------------------------------------------------------------------*/
|
/** @defgroup SDIO_Private_Functions_Prototypes SDIO Private Functions Prototypes
|
* @{
|
*/
|
|
/**
|
* @}
|
*/
|
|
/* Private functions -------------------------------------------------------------------------------------------------*/
|
/** @defgroup SDIO_Private_Functions SDIO Private Functions
|
* @{
|
*/
|
|
/**
|
* @}
|
*/
|
|
/**
|
* @}
|
*/
|
|
/**
|
* @}
|
*/
|
#endif /* SDMMC1 || SDMMC2 */
|
|
/**
|
* @}
|
*/
|
|
#ifdef __cplusplus
|
}
|
#endif
|
|
|
#endif /* STM32H7xx_HAL_SDIO_H */
|
