/**
|
******************************************************************************
|
* @file stm32_eval.h
|
* @author MCD Application Team
|
* @version V4.5.0
|
* @date 07-March-2011
|
* @brief Header file for stm32_eval.c module.
|
******************************************************************************
|
* @attention
|
*
|
* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
|
* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
|
* TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
|
* DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
|
* FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
|
* CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
|
*
|
* <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>
|
******************************************************************************
|
*/
|
|
/* Define to prevent recursive inclusion -------------------------------------*/
|
#ifndef __STM32_EVAL_H
|
#define __STM32_EVAL_H
|
|
#ifdef __cplusplus
|
extern "C" {
|
#endif
|
|
/* Includes ------------------------------------------------------------------*/
|
|
/** @addtogroup Utilities
|
* @{
|
*/
|
|
/** @addtogroup STM32_EVAL
|
* @{
|
*/
|
|
/** @defgroup STM32_EVAL_Abstraction_Layer
|
* @{
|
*/
|
|
/** @defgroup STM32_EVAL_HARDWARE_RESOURCES
|
* @{
|
*/
|
|
/**
|
@code
|
The table below gives an overview of the hardware resources supported by each
|
STM32 EVAL board.
|
- LCD: TFT Color LCD (Parallel (FSMC) and Serial (SPI))
|
- IOE: IO Expander on I2C
|
- sFLASH: serial SPI FLASH (M25Pxxx)
|
- sEE: serial I2C EEPROM (M24C08, M24C32, M24C64)
|
- TSENSOR: Temperature Sensor (LM75)
|
- SD: SD Card memory (SPI and SDIO (SD Card MODE))
|
=================================================================================================================+
|
STM32 EVAL | LED | Buttons | Com Ports | LCD | IOE | sFLASH | sEE | TSENSOR | SD (SPI) | SD(SDIO) |
|
=================================================================================================================+
|
STM3210B-EVAL | 4 | 8 | 2 | YES (SPI) | NO | YES | NO | YES | YES | NO |
|
-----------------------------------------------------------------------------------------------------------------+
|
STM3210E-EVAL | 4 | 8 | 2 | YES (FSMC)| NO | YES | NO | YES | NO | YES |
|
-----------------------------------------------------------------------------------------------------------------+
|
STM3210C-EVAL | 4 | 3 | 1 | YES (SPI) | YES | NO | YES | NO | YES | NO |
|
-----------------------------------------------------------------------------------------------------------------+
|
STM32100B-EVAL | 4 | 8 | 2 | YES (SPI) | NO | YES | NO | YES | YES | NO |
|
-----------------------------------------------------------------------------------------------------------------+
|
STM32L152-EVAL | 4 | 8 | 2 | YES (SPI) | NO | NO | NO | YES | YES | NO |
|
-----------------------------------------------------------------------------------------------------------------+
|
STM32100E-EVAL | 4 | 8 | 2 | YES (FSMC)| YES | YES | YES | YES | YES | NO |
|
=================================================================================================================+
|
@endcode
|
*/
|
|
/**
|
* @}
|
*/
|
|
/** @defgroup STM32_EVAL_Exported_Types
|
* @{
|
*/
|
typedef enum
|
{
|
LED1 = 0,
|
LED2 = 1,
|
LED3 = 2,
|
LED4 = 3
|
} Led_TypeDef;
|
|
typedef enum
|
{
|
BUTTON_WAKEUP = 0,
|
BUTTON_TAMPER = 1,
|
BUTTON_KEY = 2,
|
BUTTON_RIGHT = 3,
|
BUTTON_LEFT = 4,
|
BUTTON_UP = 5,
|
BUTTON_DOWN = 6,
|
BUTTON_SEL = 7
|
} Button_TypeDef;
|
|
typedef enum
|
{
|
BUTTON_MODE_GPIO = 0,
|
BUTTON_MODE_EXTI = 1
|
} ButtonMode_TypeDef;
|
|
typedef enum
|
{
|
JOY_NONE = 0,
|
JOY_SEL = 1,
|
JOY_DOWN = 2,
|
JOY_LEFT = 3,
|
JOY_RIGHT = 4,
|
JOY_UP = 5
|
} JOYState_TypeDef
|
;
|
|
typedef enum
|
{
|
COM1 = 0,
|
COM2 = 1
|
} COM_TypeDef;
|
/**
|
* @}
|
*/
|
typedef enum
|
{
|
FAILED = 0,
|
PASSED = !FAILED
|
} TestStatus;
|
/** @defgroup STM32_EVAL_Exported_Constants
|
* @{
|
*/
|
|
/**
|
* @brief Uncomment the line corresponding to the STMicroelectronics evaluation
|
* board used in your application.
|
*
|
* Tip: To avoid modifying this file each time you need to switch between these
|
* boards, you can define the board in your toolchain compiler preprocessor.
|
*/
|
#if !defined (USE_STM32100B_EVAL) && !defined (USE_STM3210B_EVAL) && !defined (USE_STM3210E_EVAL)\
|
&& !defined (USE_STM3210C_EVAL) && !defined (USE_STM32L152_EVAL) && !defined (USE_STM32100E_EVAL)
|
//#define USE_STM32100B_EVAL
|
//#define USE_STM3210B_EVAL
|
//#define USE_STM3210E_EVAL
|
//#define USE_STM3210C_EVAL
|
//#define USE_STM32L152_EVAL
|
//#define USE_STM32100E_EVAL
|
#endif
|
|
#ifdef USE_STM32100B_EVAL
|
#include "stm32f10x.h"
|
#include "stm32100b_eval/stm32100b_eval.h"
|
#elif defined USE_STM3210B_EVAL
|
#include "stm32f10x.h"
|
#include "stm3210b_eval/stm3210b_eval.h"
|
#elif defined USE_STM3210E_EVAL
|
#include "stm32f10x.h"
|
#include "stm3210e_eval/stm3210e_eval.h"
|
#include "stm3210e_eval/stm3210e_eval_lcd.h"
|
#elif defined USE_STM3210C_EVAL
|
#include "stm32f10x.h"
|
#include "stm3210c_eval/stm3210c_eval.h"
|
#elif defined USE_STM32L152_EVAL
|
#include "stm32l1xx.h"
|
#include "stm32l152_eval/stm32l152_eval.h"
|
#elif defined USE_STM32100E_EVAL
|
#include "stm32f10x.h"
|
#include "stm32100e_eval/stm32100e_eval.h"
|
#else
|
#error "Please select first the STM32 EVAL board to be used (in stm32_eval.h)"
|
#endif
|
|
|
/**
|
* @brief STM32 Button Defines Legacy
|
*/
|
#define Button_WAKEUP BUTTON_WAKEUP
|
#define Button_TAMPER BUTTON_TAMPER
|
#define Button_KEY BUTTON_KEY
|
#define Button_RIGHT BUTTON_RIGHT
|
#define Button_LEFT BUTTON_LEFT
|
#define Button_UP BUTTON_TAMPER//BUTTON_UP
|
#define Button_DOWN BUTTON_WAKEUP//BUTTON_DOWN
|
#define Button_SEL BUTTON_SEL
|
#define Mode_GPIO BUTTON_MODE_GPIO
|
#define Mode_EXTI BUTTON_MODE_EXTI
|
#define Button_Mode_TypeDef ButtonMode_TypeDef
|
#define JOY_CENTER JOY_SEL
|
#define JOY_State_TypeDef JOYState_TypeDef
|
|
/**
|
* @brief LCD Defines Legacy
|
*/
|
#define LCD_RSNWR_GPIO_CLK LCD_NWR_GPIO_CLK
|
#define LCD_SPI_GPIO_PORT LCD_SPI_SCK_GPIO_PORT
|
#define LCD_SPI_GPIO_CLK LCD_SPI_SCK_GPIO_CLK
|
#define R0 LCD_REG_0
|
#define R1 LCD_REG_1
|
#define R2 LCD_REG_2
|
#define R3 LCD_REG_3
|
#define R4 LCD_REG_4
|
#define R5 LCD_REG_5
|
#define R6 LCD_REG_6
|
#define R7 LCD_REG_7
|
#define R8 LCD_REG_8
|
#define R9 LCD_REG_9
|
#define R10 LCD_REG_10
|
#define R12 LCD_REG_12
|
#define R13 LCD_REG_13
|
#define R14 LCD_REG_14
|
#define R15 LCD_REG_15
|
#define R16 LCD_REG_16
|
#define R17 LCD_REG_17
|
#define R18 LCD_REG_18
|
#define R19 LCD_REG_19
|
#define R20 LCD_REG_20
|
#define R21 LCD_REG_21
|
#define R22 LCD_REG_22
|
#define R23 LCD_REG_23
|
#define R24 LCD_REG_24
|
#define R25 LCD_REG_25
|
#define R26 LCD_REG_26
|
#define R27 LCD_REG_27
|
#define R28 LCD_REG_28
|
#define R29 LCD_REG_29
|
#define R30 LCD_REG_30
|
#define R31 LCD_REG_31
|
#define R32 LCD_REG_32
|
#define R33 LCD_REG_33
|
#define R34 LCD_REG_34
|
#define R36 LCD_REG_36
|
#define R37 LCD_REG_37
|
#define R40 LCD_REG_40
|
#define R41 LCD_REG_41
|
#define R43 LCD_REG_43
|
#define R45 LCD_REG_45
|
#define R48 LCD_REG_48
|
#define R49 LCD_REG_49
|
#define R50 LCD_REG_50
|
#define R51 LCD_REG_51
|
#define R52 LCD_REG_52
|
#define R53 LCD_REG_53
|
#define R54 LCD_REG_54
|
#define R55 LCD_REG_55
|
#define R56 LCD_REG_56
|
#define R57 LCD_REG_57
|
#define R59 LCD_REG_59
|
#define R60 LCD_REG_60
|
#define R61 LCD_REG_61
|
#define R62 LCD_REG_62
|
#define R63 LCD_REG_63
|
#define R64 LCD_REG_64
|
#define R65 LCD_REG_65
|
#define R66 LCD_REG_66
|
#define R67 LCD_REG_67
|
#define R68 LCD_REG_68
|
#define R69 LCD_REG_69
|
#define R70 LCD_REG_70
|
#define R71 LCD_REG_71
|
#define R72 LCD_REG_72
|
#define R73 LCD_REG_73
|
#define R74 LCD_REG_74
|
#define R75 LCD_REG_75
|
#define R76 LCD_REG_76
|
#define R77 LCD_REG_77
|
#define R78 LCD_REG_78
|
#define R79 LCD_REG_79
|
#define R80 LCD_REG_80
|
#define R81 LCD_REG_81
|
#define R82 LCD_REG_82
|
#define R83 LCD_REG_83
|
#define R96 LCD_REG_96
|
#define R97 LCD_REG_97
|
#define R106 LCD_REG_106
|
#define R118 LCD_REG_118
|
#define R128 LCD_REG_128
|
#define R129 LCD_REG_129
|
#define R130 LCD_REG_130
|
#define R131 LCD_REG_131
|
#define R132 LCD_REG_132
|
#define R133 LCD_REG_133
|
#define R134 LCD_REG_134
|
#define R135 LCD_REG_135
|
#define R136 LCD_REG_136
|
#define R137 LCD_REG_137
|
#define R139 LCD_REG_139
|
#define R140 LCD_REG_140
|
#define R141 LCD_REG_141
|
#define R143 LCD_REG_143
|
#define R144 LCD_REG_144
|
#define R145 LCD_REG_145
|
#define R146 LCD_REG_146
|
#define R147 LCD_REG_147
|
#define R148 LCD_REG_148
|
#define R149 LCD_REG_149
|
#define R150 LCD_REG_150
|
#define R151 LCD_REG_151
|
#define R152 LCD_REG_152
|
#define R153 LCD_REG_153
|
#define R154 LCD_REG_154
|
#define R157 LCD_REG_157
|
#define R192 LCD_REG_192
|
#define R193 LCD_REG_193
|
#define R227 LCD_REG_227
|
#define R229 LCD_REG_229
|
#define R231 LCD_REG_231
|
#define R239 LCD_REG_239
|
#define White LCD_COLOR_WHITE
|
#define Black LCD_COLOR_BLACK
|
#define Grey LCD_COLOR_GREY
|
#define Blue LCD_COLOR_BLUE
|
#define Blue2 LCD_COLOR_BLUE2
|
#define Red LCD_COLOR_RED
|
#define Magenta LCD_COLOR_MAGENTA
|
#define Green LCD_COLOR_GREEN
|
#define Cyan LCD_COLOR_CYAN
|
#define Yellow LCD_COLOR_YELLOW
|
#define Line0 LCD_LINE_0
|
#define Line1 LCD_LINE_1
|
#define Line2 LCD_LINE_2
|
#define Line3 LCD_LINE_3
|
#define Line4 LCD_LINE_4
|
#define Line5 LCD_LINE_5
|
#define Line6 LCD_LINE_6
|
#define Line7 LCD_LINE_7
|
#define Line8 LCD_LINE_8
|
#define Line9 LCD_LINE_9
|
#define Horizontal LCD_DIR_HORIZONTAL
|
#define Vertical LCD_DIR_VERTICAL
|
|
|
/**
|
* @}
|
*/
|
|
/** @defgroup STM32_EVAL_Exported_Macros
|
* @{
|
*/
|
/**
|
* @}
|
*/
|
|
/** @defgroup STM32_EVAL_Exported_Functions
|
* @{
|
*/
|
/**
|
* @}
|
*/
|
|
#ifdef __cplusplus
|
}
|
#endif
|
|
|
#endif /* __STM32_EVAL_H */
|
|
/**
|
* @}
|
*/
|
|
/**
|
* @}
|
*/
|
|
/**
|
* @}
|
*/
|
|
/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/
|
