ota升级开发完成

WXK

2025-03-27 4be9f00578cbfd72ea94f56c7353a2d3ce92ec77

 keil/include/drivers/serial_at_cmd_app.c

@@ -10,7 +10,7 @@
#include "board.h"
//#include "Spi.h"
//#include "radio.h"

#include "DBG.h"


//#define EUART_RX_BUF_SIZE 100
@@ -138,6 +138,10 @@

}
double d_value;
uint8_t shell_receive_state;
//static HIDO_UINT8 l_u8GPSBuff[512];
//static HIDO_UINT32 l_u8GPSLen = 0;
//static HIDO_UINT32 l_u8GPSRecvTick = 0;
void UsartParseDataHandler(uint8_t data)
{
    if(state5V_prase_flag&&!g_com_map[MODBUS_MODE])
@@ -146,7 +150,7 @@
        uint16_t checksum = 0;
        static uint8_t pack_datalen = 0,pack_length = 0,pack_index = 0,pack_msgtype = 0,pack_cmd = CMD_READ;
        static uint8_t index = 0;

//uint8_t shell_receive_state;



@@ -223,6 +227,16 @@
        } else if ((usart_receive_state == UsartReceiveWaitMsgType) && (data == 0x3)) {
            usart_receive_state = UsartReceiveWaitLength;
            pack_msgtype = data;
        } else if ((shell_receive_state == 0) && (data == 0x03)) {
            shell_receive_state = 1;
            uart_send(UART_ID1, data,1, NULL);
        } else if ((shell_receive_state == 1) && (data == 0x03)) {
            shell_receive_state = 2;
            uart_send(UART_ID1, data,1, NULL);
        } else if ((shell_receive_state == 2) && (data == 0x03)) {
          DBG_SetMode(DBG_MODE_SHELL);
            uart_send(UART_ID1, data,1, NULL);
            shell_receive_state=0;
        }
        else {
            usart_receive_state = UsartReceiveWaitHead0;
@@ -231,60 +245,57 @@
        }
    } else if(gps_prase_flag)
    {
        static uint8_t index = 0;
//        static uint8_t index = 0;
//GPS解析数据
//   static ST_BLERecv BLE_recvive;
        GGA_DataStruct jdrecv,wdrecv,Posstate;
//        GGA_DataStruct jdrecv,wdrecv,Posstate;
        GPS_RecvFsm(data);
//        l_u8GPSBuff[l_u8GPSLen++] = data;
//        if(l_u8GPSLen >= sizeof(l_u8GPSBuff))
//        {
//            NTRIPApp_ReportGGA(l_u8GPSBuff, l_u8GPSLen);
//            l_u8GPSLen = 0;
//        }
        
        //接收数据开始分析
        mUsart2ReceivePack[index]  =  data; //char数组传进来参数data
        mUsart2ReceivePack_before  =  mUsart2ReceivePack_now;
        mUsart2ReceivePack_now=data;
        index++;
        if( mUsart2ReceivePack_before == 0x0D && mUsart2ReceivePack_now==0x0A )//接收数据到“0x0D 0x0A”结束
        {
            //解析该条GPS报文
           
            analysis_num=sscanf((char*)mUsart2ReceivePack,"$%[^,],%*[^,],%[^,],%*[^,],%[^,],%*[^,],%[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*s",gps_header,wdrecv.m_pData,jdrecv.m_pData,Posstate.m_pData);
            if(!memcmp(gps_header,"GNGGA",5))
            { 
                     memcpy(GPS_GGAmessage,mUsart2ReceivePack,strlen(mUsart2ReceivePack)-2);
                   
                    wd=strtod(wdrecv.m_pData,NULL);
                    jd=strtod(jdrecv.m_pData,NULL);
                              if(wd!=0)
                              blink_led(&gps_success_state);
                    pos_state=atoi(Posstate.m_pData);
                        if(pos_state!=0)
                        {
                gps_timeout_flag=0;//不超时接收状态
							
                gps_need_data_flag=0;//接收数据完成
                gps_wait_count=0;//清0接收状态
                        //gps_power_state=0;//关闭gps
                        if(gps_open_flag){
                        UDPClient_UploadGPS();//上传GPS超时无效数据
                        gps_power_state=0;//立即关掉gps，防止串口数据过多导致无法切换休眠
                        update_led_power_state();
                           }
                        pos_state=0;//防止多次进入
                        }
						
            }
//                  if(!memcmp(gps_header,"GBGSV",5))
//                  {memcpy(GPS_GSVmessage,mUsart2ReceivePack,strlen(mUsart2ReceivePack)-2);
//                  GPS_ParseGSV(GPS_GSVmessage,strlen(GPS_GSVmessage));
//        l_u8GPSRecvTick = HIDO_TimerGetTick();
//        //接收数据开始分析
//        mUsart2ReceivePack[index]  =  data; //char数组传进来参数data
//        mUsart2ReceivePack_before  =  mUsart2ReceivePack_now;
//        mUsart2ReceivePack_now=data;
//        index++;
//        if( mUsart2ReceivePack_before == 0x0D && mUsart2ReceivePack_now==0x0A )//接收数据到“0x0D 0x0A”结束
//        {
//            //解析该条GPS报文
//           
//            analysis_num=sscanf((char*)mUsart2ReceivePack,"$%[^,],%*[^,],%[^,],%*[^,],%[^,],%*[^,],%[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*s",gps_header,wdrecv.m_pData,jdrecv.m_pData,Posstate.m_pData);
//            if(!memcmp(gps_header,"GNGGA",5))
//            { 
//                     memcpy(GPS_GGAmessage,mUsart2ReceivePack,strlen(mUsart2ReceivePack)-2);
//                   
//                    wd=strtod(wdrecv.m_pData,NULL);
//                    jd=strtod(jdrecv.m_pData,NULL);
//                              if(wd!=0)
//                    pos_state=atoi(Posstate.m_pData);
//                        if(pos_state!=0)
//                        {
//                        pos_state=0;//防止多次进入
//                        }
//                  
//                  }
            
            memset(mUsart2ReceivePack,0,sizeof(mUsart2ReceivePack));
            memset(wdrecv.m_pData,0,sizeof(wdrecv.m_pData));
            memset(jdrecv.m_pData,0,sizeof(jdrecv.m_pData));
            memset(Posstate.m_pData,0,sizeof(Posstate.m_pData));
            index=0;
            mUsart2ReceivePack_before=0;
            mUsart2ReceivePack_now=0;
        }
//            }
////                  if(!memcmp(gps_header,"GBGSV",5))
////                  {memcpy(GPS_GSVmessage,mUsart2ReceivePack,strlen(mUsart2ReceivePack)-2);
////                  GPS_ParseGSV(GPS_GSVmessage,strlen(GPS_GSVmessage));
////						
////                  }
//            
//            memset(mUsart2ReceivePack,0,sizeof(mUsart2ReceivePack));
//            memset(wdrecv.m_pData,0,sizeof(wdrecv.m_pData));
//            memset(jdrecv.m_pData,0,sizeof(jdrecv.m_pData));
//            memset(Posstate.m_pData,0,sizeof(Posstate.m_pData));
//            index=0;
//            mUsart2ReceivePack_before=0;
//            mUsart2ReceivePack_now=0;
//        }
    }
}