加入版本号

WXK

2025-03-03 82eaf74eda0c8ee343bd8a5bbf3f75b3b6ae4a87

 keil/uwb_app.c

@@ -117,26 +117,9 @@
    struct UWB_CONFIG_T phy_cfg;
};

///* Default communication configuration. */
//static struct mk_uwb_configure config = {//原来的基站非110k代码
//    .phy_work_mode = (uint8_t)(PHY_TX | PHY_RX),
//    .phy_cfg.ch_num = 5,                      /* Channel number.                           */
//    .phy_cfg.code_index = 9,                  /* TX preamble code.                         */
//    .phy_cfg.mean_prf = MEAN_PRF_64M,         /* Data rate 6.8M                            */
//    .phy_cfg.data_bit_rate = DATA_BR_6M8,     /* data rate 6.8M.                           */
//    .phy_cfg.sync_sym = PREAM_LEN_128,        /* Preamble duration, length of preamble 128 */
//    .phy_cfg.sfd_sym = BPRF_NSFD2_8,          /* Identifier for SFD sequence               */
//    .phy_cfg.ranging_bit = 1,                 /* ranging bit set.                          */
//    .phy_cfg.trx_mode = TRX_MODE_15_4Z_BPRF,  /* IEEE802.15.4z - BPRF mode                 */
//    .phy_cfg.sts_pkt_cfg = STS_PKT_CFG_0,     /* SP0 Frame                                 */
//    .phy_cfg.sts_segnum = STS_SEGNUM_BPRF_1,  /* Number of STS segments in the frame       */
//    .phy_cfg.sts_seglen = STS_SEGLEN_BPRF_64, /* Number of symbols in an STS segment       */
//    .phy_cfg.rx_ant_id = UWB_RX_ANT_3,    /* UWB RX antenna port                       */
//};
#ifdef DW1000
static struct mk_uwb_configure config = {
    .phy_work_mode = (uint8_t)(PHY_TX | PHY_RX),
    .phy_cfg.ch_num = 9,                      /* Channel number.                           */
    .phy_cfg.ch_num = 5,                      /* Channel number.                           */
    .phy_cfg.code_index = 9,                  /* TRX preamble code                         */
    .phy_cfg.mean_prf = MEAN_PRF_64M,         /* Mean prf 64/128/256M                      */
    .phy_cfg.data_bit_rate = DATA_BR_6M8,     /* Data rate 6.8M                            */
@@ -149,50 +132,7 @@
    .phy_cfg.sts_seglen = STS_SEGLEN_BPRF_64, /* Number of symbols in an STS segment       */
    .phy_cfg.rx_ant_id = UWB_RX_ANT_3,    /* UWB RX antenna port                       */
};
#elif defined STS_MODE
static struct mk_uwb_configure config = {
    .phy_work_mode = (uint8_t)(PHY_TX | PHY_RX),
    .phy_cfg.ch_num = 5,                      /* Channel number.                           */
    .phy_cfg.code_index = 9,                  /* TRX preamble code                         */
    .phy_cfg.mean_prf = MEAN_PRF_64M,         /* Mean prf 64/128/256M                      */
    .phy_cfg.data_bit_rate = DATA_BR_6M8,     /* Data rate 6.8M                            */
    .phy_cfg.sync_sym = PREAM_LEN_128,        /* Preamble duration, length of preamble 128 */
    .phy_cfg.sfd_sym = BPRF_NSFD2_8,          /* Identifier for SFD sequence               */
    .phy_cfg.ranging_bit = 1,                 /* ranging bit set 1                         */
    .phy_cfg.trx_mode = TRX_MODE_15_4Z_BPRF,  /* IEEE802.15.4z - BPRF mode                 */
    .phy_cfg.sts_pkt_cfg = STS_PKT_CFG_1,     /* SP1 Frame                                 */
    .phy_cfg.sts_segnum = STS_SEGNUM_BPRF_1,  /* Number of STS segments in the frame       */
    .phy_cfg.sts_seglen = STS_SEGLEN_BPRF_64, /* Number of symbols in an STS segment       */
    .phy_cfg.rx_ant_id = UWB_RX_ANT_3,        /* UWB RX antenna port                       */
};
/* Use the default key and IV specified in the IEEE 802.15.4z attachment */
static struct UWB_STS_KEY_CONFIG_T sts_iv_key = {
    .sts_vcounter = 0x1F9A3DE4,
    .sts_vupper0 = 0xD37EC3CA,
    .sts_vupper1 = 0xC44FA8FB,
    .sts_vupper2 = 0x362EEB34,
    .sts_key0 = 0x14EB220F,
    .sts_key1 = 0xF86050A8,
    .sts_key2 = 0xD1D336AA,
    .sts_key3 = 0x14148674,
};
#elif defined MK_MODE
static struct mk_uwb_configure config = {
    .phy_work_mode = (uint8_t)(PHY_TX | PHY_RX),
    .phy_cfg.ch_num = 9,                      /* Channel number.                           */
    .phy_cfg.code_index = 9,                  /* TX preamble code.                         */
    .phy_cfg.mean_prf = MEAN_PRF_64M,         /* Data rate 6.8M                            */
    .phy_cfg.data_bit_rate = DATA_BR_6M8,     /* data rate 6.8M.                           */
    .phy_cfg.sync_sym = PREAM_LEN_128,        /* Preamble duration, length of preamble 128 */
    .phy_cfg.sfd_sym = BPRF_NSFD2_8,          /* Identifier for SFD sequence               */
    .phy_cfg.ranging_bit = 1,                 /* ranging bit set.                          */
    .phy_cfg.trx_mode = TRX_MODE_15_4Z_BPRF,  /* IEEE802.15.4z - BPRF mode                 */
    .phy_cfg.sts_pkt_cfg = STS_PKT_CFG_0,     /* SP0 Frame                                 */
    .phy_cfg.sts_segnum = STS_SEGNUM_BPRF_1,  /* Number of STS segments in the frame       */
    .phy_cfg.sts_seglen = STS_SEGLEN_BPRF_64, /* Number of symbols in an STS segment       */
    .phy_cfg.rx_ant_id = UWB_RX_ANT_3,        /* UWB RX antenna port                       */
};
#endif


static struct anchor_id_car{
 uint16_t anchor_new_id;
@@ -434,8 +374,9 @@
uint32_t start_receive_count,end_receive_count,poll_timeout,current_count,temp_resp;
int16_t anchordata_id[TAG_NUM_IN_SYS],anchordata_dist[TAG_NUM_IN_SYS];
static uint8_t anchordata_bat[TAG_NUM_IN_SYS];
static uint16_t anchordata_version[TAG_NUM_IN_SYS];
uint8_t anchordata_num = 0;
static int32_t tagdist_list[TAG_NUM_IN_SYS];
static int16_t tagdist_list[TAG_NUM_IN_SYS];
uint16_t random_time;
//anchor
int32_t hist_dist;
@@ -542,6 +483,7 @@
            tagid_list[j]=tagid_list[i];
            tagdist_list[j] = tagdist_list[i];
                  anchordata_bat[j]=anchordata_bat[i];//电量随之更新
            anchordata_version[j]=anchordata_version[i];
            tagofflinetime[j++]=tagofflinetime[i];
        }
      }
@@ -710,55 +652,16 @@
        uwbsend[3]=taglist_num;
        memcpy(&uwbsend[4],&tagid_list,taglist_num*2);
        memcpy(&uwbsend[4+taglist_num*2],&tagdist_list,taglist_num*2);
        uart_send(UART_ID0, uwbsend,taglist_num*4+4, NULL);
        memcpy(&uwbsend[4+taglist_num*4],&anchordata_version,taglist_num*2);
        uart_send(UART_ID0, uwbsend,taglist_num*6+4, NULL);
//        for(int i=0;i<anchordata_num;i++)
//        {
//        LOG_INFO(TRACE_MODULE_APP,"当前测距基站ID:%x,距离:%d.\r\n",anchordata_id[i],anchordata_dist[i]);
//        LOG_INFO(TRACE_MODULE_APP,"当前测距基站ID:%x,距离:%d.\r\n",tagid_list[0],tagdist_list[0]);
//        }
   }
}
int uwb_app_poll(void)
{
//   switch(wltag_state)
//   {
//   case RANGE:
//   if(HIDO_TimerGetTick()-wltag_uwbtimer>2&&uwb_rx_flag==0)
//      {
//            wltag_uwbtimer = HIDO_TimerGetTick();
//            OpenUWB();
//      }
//   else if(HIDO_TimerGetTick()-wltag_uwbtimer>1&&uwb_rx_flag==1)
//      {
//            wltag_uwbtimer = HIDO_TimerGetTick();
//            CloseUWB();
//      }
//      if(uwb_losttimer>g_com_map[UWB_RNAGE_TIME])
//      { 
//       wltag_statetimer = HIDO_TimerGetTick();
//         if(uwb_rx_flag==0)//若要切换到搜索模式时没有开启则开启UWB
//         {
//            OpenUWB();
//         }
//     wltag_state = SEARCH;
//      }
//      break;
//   case SEARCH:
//      if(HIDO_TimerGetTick()-wltag_statetimer>1)
//      {
//      wltag_statetimer = HIDO_TimerGetTick();
//    wltag_state = CLOSE;
//    CloseUWB();
//      }
//      break;
//   case CLOSE:
//      if(HIDO_TimerGetTick()-wltag_statetimer>g_com_map[UWB_WAIT_TIME])
//      {
//      wltag_statetimer = HIDO_TimerGetTick();
//    wltag_state = SEARCH;
//    OpenUWB();
//      }
//      break;
//   }
    UWBIdleTask();
}
int Anchor_App(void)
@@ -813,6 +716,8 @@
                                    Anchor_RecNearPoll(i);
                                    tagdist_list[taglist_pos]=rec_ancdistlist[i];
                                    anchordata_bat[taglist_pos] = battary;//保存该基站电量
//                                                anchordata_version[taglist_pos] = battary;//保存该基站版本号
                                                memcpy(& anchordata_version[taglist_pos],&rx_buf[7],2);
                                    if(taglist_pos==taglist_num)// taglist_pos==taglist_num 说明这个基站不在当前列表中
                                    {   //tempid==dev_id 说明基站下发测距报文有这个标签的信息
                                          taglist_num++;          //满足上述两种情况才会添加基站ID进入列表中，否则会出现标签不在基站列表中，标签也不响应的情况