完成免布线标签地板基本测试，修改串口为串口0，有修改为功率固件flag因中断多次触发问题，未加防抖保护，升级未测试

chen

2025-05-29 9aa8760604c398bc3a7a19b26c9e06de776f11df

 keil/include/drivers/serial_at_cmd_app.c

@@ -20,6 +20,8 @@

uint8_t mUsartReceivePack[100] = {0};
uint8_t mUsart2ReceivePack[150] = {0};
uint8_t GPS_GGAmessage[150]={0};
uint8_t GPS_GSVmessage[150]={0};
double jd,wd;
int analysis_num,pos_state;
uint8_t state5V_prase_flag=1,gps_prase_flag=1;
@@ -27,10 +29,9 @@
extern void IO_control_init(void);
extern void blink_led(uint8_t*state);
extern void updata_led_power_state(void);
extern uint8_t gps_success_state;
extern uint8_t gps_success_state,gps_open_flag;
extern uint8_t gps_success_state,gps_enable_flag,gps_need_data_flag,gps_timeout_flag,gps_power_state;
extern uint16_t gps_wait_count;
uint8_t gps_send_count=3;
typedef enum
{
    BLE_RECV_STATE_IDLE = 0,
@@ -80,7 +81,27 @@
    sum = ~sum;
    return sum;
}

void SendComMap0(uint8_t data_length, uint8_t index)//表示成功读取的回应包
   {
   static uint8_t send_frame[EUART_RX_BUF_SIZE];
   uint16_t checksum = 0;
   send_frame[0] = 0x55;
   send_frame[1] = 0xAA;
   send_frame[2] = 0x03;
   send_frame[3] = data_length+5;
   send_frame[4] = CMD_REPLY;
   send_frame[5] = index;
   send_frame[6] = data_length;
   memcpy(&send_frame[7], &g_com_map[index], data_length);
   for(int i = 0; i<(data_length+5); i++)
   {
      checksum += send_frame[2+i];
   }
   checksum = Checksum_u16(&send_frame[2],5+data_length);
   memcpy(&send_frame[7+data_length],&checksum,2);
	
    uart_send(UART_ID0, send_frame,data_length+9, NULL);	
}
void SendComMap(uint8_t data_length, uint8_t index)//表示成功读取的回应包
{
    static uint8_t send_frame[EUART_RX_BUF_SIZE];
@@ -184,7 +205,7 @@
                case CMD_READ:
                    //read包中data字节，即mUsartReceivePack[0]表示数据长度；
                    //从g_com_data结构体中的第index位置读取长度为mUsartReceivePack[0]的字节，发送出来
                    SendComMap(pack_datalen,pack_index>>1);
                    SendComMap0(pack_datalen,pack_index>>1);
                    break;
                default:
                    break;
@@ -247,37 +268,24 @@
            analysis_num=sscanf((char*)mUsart2ReceivePack,"$%[^,],%*[^,],%[^,],%*[^,],%[^,],%*[^,],%[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*s",gps_header,wdrecv.m_pData,jdrecv.m_pData,Posstate.m_pData);
            if(!memcmp(gps_header,"GNGGA",5))
            { 
//                if(g_com_map[MODBUS_MODE])
//                    LOG_INFO(TRACE_MODULE_APP,"%s", mUsart2ReceivePack);
             pos_state=atoi(Posstate.m_pData);   
               if(pos_state!=0)
            {
							
                //4g.jd=jd;
                //4g.wd=wd;
                       blink_led(&gps_success_state);
                wd=strtod(wdrecv.m_pData,NULL);
                jd=strtod(jdrecv.m_pData,NULL);
                gps_send_count--;
                gps_timeout_flag=0;//不超时接收状态
                
                gps_wait_count=0;//清0接收状态
                     if(gps_send_count==0){
                        gps_need_data_flag=0;//接收数据完成
                        TCPHeartBeatUpload();//上传GPS数据
                     gps_power_state=0;
                     update_led_power_state();
                        gps_send_count=3;
                     }
                     pos_state=0;//以防多次发生
								
								
//      gps_enable_flag=0;//收到有效数据关闭GPS
            
                     memcpy(GPS_GGAmessage,mUsart2ReceivePack,strlen(mUsart2ReceivePack)-2);
                   
                    wd=strtod(wdrecv.m_pData,NULL);
                    jd=strtod(jdrecv.m_pData,NULL);
                              if(wd!=0)
                    pos_state=atoi(Posstate.m_pData);
                        if(pos_state!=0)
                        {
                        pos_state=0;//防止多次进入
                        }
						
            }
               }						
//                  if(!memcmp(gps_header,"GBGSV",5))
//                  {memcpy(GPS_GSVmessage,mUsart2ReceivePack,strlen(mUsart2ReceivePack)-2);
//                  GPS_ParseGSV(GPS_GSVmessage,strlen(GPS_GSVmessage));
//						
//                  }
            

            memset(mUsart2ReceivePack,0,sizeof(mUsart2ReceivePack));
            memset(wdrecv.m_pData,0,sizeof(wdrecv.m_pData));
            memset(jdrecv.m_pData,0,sizeof(jdrecv.m_pData));