成功移植g_com_map表逻辑，初步测试能读能写，并且TDOA效果和官方一致

chen

2 天以前 adfc7e798b9cbdd022bf8df971843436912a0fe5

 keil/include/main/main.c

@@ -1,5 +1,5 @@
/*
 * Copyright (c) 2019-2023 Beijing Hanwei Innovation Technology Ltd. Co. and
 * Copyright (c) 2019-2025 Beijing Hanwei Innovation Technology Ltd. Co. and
 * its subsidiaries and affiliates (collectly called MKSEMI).
 *
 * All rights reserved.
@@ -40,81 +40,35 @@

#include "mk_trace.h"
#include "mk_wdt.h"
#include "mk_calib.h"
#include "mk_reset.h"
#include "mk_gpio.h"
#include "mk_misc.h"
#include "mk_flash.h"
#include "libc_rom.h"
#include <serial_at_cmd_app.h>
#include <global_param.h>
#include "board.h"
#include "wsf_nvm.h"
#include "mk_power.h"
#include "Usart.h"
#include "mk_adc.h"
#include "mk_sleep_timer.h"
#include "lis3dh_driver.h"
#include "sn74hc595.h"
#include "mk_4G.h"
#include "UART.h"
#include "AIR780EDriver.h"
#include "Internet.h"
#include "HIDO_ATLite.h"
#include "HIDO_Timer.h"
#include "TCPClient.h"
#include "PCA9555.h"
#include "WS2812.h"
#include "mk_uwb.h"
#include "mk_calib.h"

#define DEBUG_MODE
extern int simple_main(void);
extern int temp_main(void);
void uart_change_check(uint16_t gpio_state);
#include "board.h"

#include "pal_sys.h"
#include "wsf_os.h"
#include "mk_timer_list.h"
#include "wsf_buf.h"

#include "app.h"
#include "ul_tdoa.h"
#include "uwb_api.h"
#include "lib_ranging.h"
#include "libc_rom.h"

#include "mk_adc.h"
#include "UART.h"
#include "Usart.h"
#include "global_param.h"
#include <serial_at_cmd_app.h>
#define TEST_UART_POLL_MODE 0
#define TEST_UART_INTERUPT_MODE 1
#define TEST_UART_DMA_MODE 2
#define TEST_UART_MODE TEST_UART_DMA_MODE

#define NUM_SAMPLES 1
#define BIND_TRIGGER_TIME 60000
#define MOTOR_COUNT_TIME 1
#define WARING_LIMIT_TIME 10
#define UPDATE_TIME 10


extern uint8_t mUsartReceivePack[100];
extern uint8_t mUsart2ReceivePack[150];
extern uint8_t state5V_prase_flag,gps_prase_flag;
extern int distance;
extern uint8_t anchordata_num;
uint32_t dev_id;
uint8_t group_id;
uint16_t tag_frequency;
uint16_t disoffset;
uint16_t warning_distance,prewarning_distance;
int16_t fVoltage_mv,first_search_flag;
uint8_t bat_percent,g_start_send_flag=1;
uint8_t link_success_flag,motor_count;
uint16_t gps_wait_count,gps_wait_count2;
uint8_t state5v = 1;
uint8_t motor_power_state=1,uwb_state,air780_power_state,gps_success_state,red_charge_state,green_charge_state,air780_success_state,first_motor_in_flag;
float nomove_count=0;
static uint32_t sample[NUM_SAMPLES] = {0};
uint8_t recev_error_num,send_messgae_count,send_flag,control_state,power_low_flag;
uint8_t flag_4g_usart_rx_state = 1;  //4G 串口RX当前是 RX状态，不是GPIO状态
int input_5v_flag,air780e_flag1,air780e_flag2,air780e_flag3,air780e_flag4;
extern uint8_t pca9555writedata_config[10];//暂存寄存器所有配置的数组
extern uint8_t pca9555writedata_output[10];//暂存输出高低电平配置的数组
extern uint8_t pca9555writedata_input[10];//暂存输入寄存器所有配置的数组
extern uint8_t pca9555writedata_polarity[10];//暂存输入极性反转寄存器所有配置的数组
uint8_t temp_pca9555writedata_input[10];//暂存上一次输入寄存器所有配置的数组
typedef enum
{      UN_BIND=0,
        LINK_SUCCESS,
        SEARCH_DEV,
} Operation_step;
Operation_step UWB_work_state;


Commend_SendDate send_struct;
struct ADC_CFG_T usr_adc_cfg = {
    .mode = ADC_MODE_CONTINUE,    /* Selected single conversion mode  */
    .clk_sel = ADC_CLK_HIGH,      /* Selected 62.4M high speed clock */
@@ -128,6 +82,12 @@
    .high_pulse_time = 4,
    .settle_time = 1,
};
typedef enum
{      UN_BIND=0,
        LINK_SUCCESS,
        SEARCH_DEV,
} Operation_step;
Operation_step UWB_work_state;
struct UART_CFG_T test_uart_cfg =
{
    .parity = UART_PARITY_NONE,
@@ -136,7 +96,7 @@
    .flow = UART_FLOW_CONTROL_NONE,
    .rx_level = UART_RXFIFO_CHAR_1,
    .tx_level = UART_TXFIFO_EMPTY,
    .baud = BAUD_9600,
    .baud = BAUD_115200,
#if (TEST_UART_MODE == TEST_UART_POLL_MODE)
    .dma_en = false,
    .int_rx = false,
@@ -151,327 +111,38 @@
    .int_tx = false,
#endif
};
void uart_receive_callback(void *dev, uint32_t err_code)
void uart0_receive_callback(void *dev, uint32_t err_code)
{
    uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
    uart_receive(UART_ID0,m_EUART0_DMA_RXBuf,EUART0_RX_BUF_SIZE,uart0_receive_callback);
}
void mcu_deep_sleep(void)
void uart1_receive_callback(void *dev, uint32_t err_code)
{
            uint32_t lock;
            trace_flush();
            lock = int_lock();
                  LOG_INFO(TRACE_MODULE_APP, "进入深度休眠\r\n");
                  gps_air780_power_change(0,0);//关闭gps，4G 
                     sleep_timer_stop();	
                  //adc_close();
            power_enter_power_down_mode(1);
                  //LOG_INFO(TRACE_MODULE_APP, "进入深度休眠\r\n");
                  sys_reset(0);
            int_unlock(lock);
    uart_receive(UART_ID1,m_EUART1_DMA_RXBuf,EUART1_RX_BUF_SIZE,uart1_receive_callback);
}
static void adc_callback(void *data, uint32_t number)
{
    uint32_t *result = (uint32_t *)data;
    for (uint16_t i = 0; i < number; i++)
    {
//        LOG_INFO(TRACE_MODULE_APP, "The voltage measured %d mv\r\n",
//        ADC_INTERNAL_VREF_MV + adc_code_to_mv((int16_t)*result, ADC_INTERNAL_VREF_MV));
        fVoltage_mv=ADC_INTERNAL_VREF_MV + adc_code_to_mv((int16_t)*result, ADC_INTERNAL_VREF_MV);
        fVoltage_mv=fVoltage_mv*2;
        if(fVoltage_mv < 3300)
        {
            bat_percent = 0;
        }
        else if(fVoltage_mv > 4100)
        {
            bat_percent = 100;
        }
        else
        {
            bat_percent = ((fVoltage_mv - 3300) /8);
        }
    }
            if(fVoltage_mv<3300)
            {
               //power_low_flag=1;
               //gps_air780_power_change(gps_power_state,0);//gps原样，关闭4G 
               //LOG_INFO(TRACE_MODULE_APP, "电池电压低于3.3V，4G，GPS停止工作\r\n");
            }else{
               //power_low_flag=0;
               //gps_air780_power_change(gps_power_state,1);//gps原样,开启4G
               //LOG_INFO(TRACE_MODULE_APP, "电池电压正常,4G，GPS,正常工作\r\n");
            }
      PCA9555_Set_One_Value_Output(ADC_MINIUS,1);//拉高
  //  LOG_INFO(TRACE_MODULE_APP, "The voltage is %%%d \r\n",bat_percent);
}
//void UartInit(void)
//{
//board_pins_config();
//uart_open(UART_ID1, &test_uart_cfg);
//board_debug_console_open(TRACE_PORT_UART0);
//uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
//}
extern uint8_t gps_uwb_flag,gps_need_data_flag;
uint32_t dev_id;
uint8_t group_id;
uint16_t tag_frequency;
uint16_t disoffset;
uint8_t bind_flag;
uint16_t warning_distance,prewarning_distance;
int16_t fVoltage_mv,first_search_flag;
uint8_t bat_percent,g_start_send_flag=1;
uint8_t link_success_flag,motor_count;
uint8_t flag_sleeptimer,flag_secondtask,secondtask_count,log_4g_enable_flag;
uint16_t gps_wait_count,gps_wait_count2;
extern uint16_t ip0,ip1,ip2,ip3,port;
uint8_t TCP_reconnect_timer,flag_TCP_reconnectting = 1,flag_alam_state = 0,userkey_state;
uint8_t gps_enable_flag,motor_open_air_flag,moter_open_uwb_flag,flag_fenli_alarm = 0,fenli_alarm_count,delaysleep_count,enbale_blink_flag;
int need_open_gps_count;
uint32_t keystarttime,keystarttime2,keystarttime3;
extern uint32_t get_in_num,get_out_num;
void MotorPoll(void)
{
    if(UWB_work_state==UN_BIND) {
        gps_uwb_flag=0;//关闭GPS
        moter_open_uwb_flag=0;//关闭震动
        need_open_gps_count=0;//清0计数gps
    } else { //绑定状态下
        if(anchordata_num==1) {
            if(distance<g_com_map[ALARM_DISTANCE1]) { //小于预警距离
                fenli_alarm_count = 0;
                if(flag_fenli_alarm)
                {
                    flag_fenli_alarm = 0;
                    fenli_alarm_count = 0;
                    _4GAlarmUpload(2);
                }
            } 
            }
            if(distance>g_com_map[ALARM_DISTANCE1]||anchordata_num==0)
                     {
                if(fenli_alarm_count++>20)
                {
                           if(!flag_fenli_alarm)
                           {
                    flag_fenli_alarm = 1;
                    _4GAlarmUpload(1);
                           }
                }
                     }
                 if(distance<g_com_map[ALARM_DISTANCE1]) { //小于预警距离
                if(flag_alam_state)
                {
                    flag_alam_state = 0;

                }		
							
                need_open_gps_count=0;
                moter_open_uwb_flag=0;//关闭震动
                gps_uwb_flag=0;//关闭GPS
            } else if(g_com_map[ALARM_DISTANCE1]<=distance&&distance<=g_com_map[ALARM_DISTANCE2]) { //大于预警距离小于报警距离
                need_open_gps_count++;
                moter_open_uwb_flag=1;//开启震动
                if(need_open_gps_count>=20) {
                    if(!flag_alam_state)
                    {
                        flag_alam_state = 1;
                    }
                    gps_uwb_flag=1;//开启gps测距流程
                    need_open_gps_count=0;
                }
            } else if(distance>=g_com_map[ALARM_DISTANCE2]) { //大于报警距离
                need_open_gps_count++;
                moter_open_uwb_flag=1;//开启震动
                if(need_open_gps_count>=20) {
                    if(!flag_alam_state)
                    {
                        flag_alam_state = 1;
                    }
                    gps_uwb_flag=1;//开启gps测距流程
                    need_open_gps_count=0;
                }
            
        } 
                  if(anchordata_num==0) {
            if(!flag_alam_state)
            {
                flag_alam_state = 1;
            }
            distance = 0x1ffff;
            gps_uwb_flag=1;//开启gps测距流程
            moter_open_uwb_flag=1;//开启震动
            need_open_gps_count=0;
        }
    }
   }
void IMUTask(void)
{
   if(nomove_count>g_com_map[NOMOVESLEEP_TIME]&&g_com_map[IMU_ENABLE]==1)
   {power_wakeup_enable((enum POWER_WAKEUP_SOURCE_T)ACCLERATE_DETECT_Pin, POWER_WAKEUP_LEVEL_HIGH);
      mcu_deep_sleep();
   }
}
void UserKeyTask(void)
{
if(!read_userkey_input_pca())
     {
        if(HIDO_TimerGetTick() - keystarttime3>2)
        {
            userkey_state = 1;
            keystarttime3 =  HIDO_TimerGetTick();
                  //UDPClient_UploadGPS();
        }
//        if(HIDO_TimerGetTick() - keystarttime2>10)
//        {
//						
//            g_com_map[CNT_RESTART] = 1;
//        }
     }else
     {
       keystarttime3 =  HIDO_TimerGetTick(); 
     }
} 
void PowerTask(void)
{
//     if(read_powerkey_input_pca())
//     {
//        if(HIDO_TimerGetTick() - keystarttime>2)
//        {
//            keystarttime =  HIDO_TimerGetTick();
//                  PCA9555_Set_One_Value_Output(PWR_ENABLE,0);//低电平关闭
//                  PCA9555_Set_One_Value_Output(GPS_LED,0);//输出低电平关闭LED
//        }
////        if(HIDO_TimerGetTick() - keystarttime2>10)
////        {
////						
////            g_com_map[CNT_RESTART] = 1;
////        }
//     }else
//     {
//       keystarttime =  HIDO_TimerGetTick(); 
//       keystarttime2 =  HIDO_TimerGetTick(); 
//     }
}
void MinuteTask(void)
{		
      PCA9555_Set_One_Value_Output(ADC_MINIUS,0);//拉低
    adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
}
void SecondTask(void)
{static uint8_t second_count;
    if(second_count++>60)
    {
        second_count = 0;
        MinuteTask();
    }
      //UWBOneSecondTask();
//      if(!power_low_flag)
//      Gps_change();
//      else{
//      gps_power_state=0;//关闭GPS
//      update_led_power_state();
//      //初始化GPS计数数据
//      gps_need_data_flag=1;
//      gps_wait_count2=0;
//      gps_wait_count=0;
//      }
//    //UWB状态检测
//if(!power_low_flag)//低供电下不需要检测重连
//   {
//    if(IfTCPConnected())
//    {
//        TCP_reconnect_timer =0;
//        flag_TCP_reconnectting = 0;
//    } else {
//        if(TCP_reconnect_timer<30)//如果TCP没有连接，每隔10分钟尝试连接30秒
//        {
//            flag_TCP_reconnectting = 1;
//        } else {
//            flag_TCP_reconnectting = 0;
//        }
//        if(TCP_reconnect_timer++>600)
//        {
//            TCP_reconnect_timer = 0;
//        }

//    }
//   }
    HIDO_TimerTick();
      if(nomove_count<=g_com_map[NOMOVESLEEP_TIME])//防止溢出
    nomove_count++;
      else{
      nomove_count=g_com_map[NOMOVESLEEP_TIME]+1;
      }
}
uint8_t tt=1;
uint8_t flag_sleeptimer,flag_secondtask,secondtask_count,log_4g_enable_flag;
uint8_t uwb_enable_flag=0;
uint8_t flag_4G_recdata;
void check_input_change(void)
{
   uint16_t gpio_state;
   gpio_state=(uint16_t)pca9555writedata_input[0]<<8|pca9555writedata_input[1];
   if(WAKE_UP_POSITION&gpio_state)
   {
      nomove_count=0;
   }
   if(!(MAIN_RI_POSITION&gpio_state))
   {
       flag_4G_recdata = 1;
     delaysleep_count = 3;
   }
   //uart_change_check(gpio_state);
}
static void sleep_timer_callback(void *dev, uint32_t time)
{
if(secondtask_count++%2==0)
    {
        flag_secondtask = 1;
    }else{
        flag_secondtask = 0;
    }
 if(delaysleep_count>0)
     delaysleep_count--;
    //GPS工作逻辑
}

static void move_handler(enum IO_PIN_T pin)
{
    nomove_count=0;
}
static void pca_handler(enum IO_PIN_T pin)
{
   PCA9555_readdata(PCA9555_DEVICE_ADDR,pca9555writedata_input);//读输入寄存器的值
   check_input_change();
}

void _4gUsart_handler(enum IO_PIN_T pin)
{
     //LOG_INFO(TRACE_MODULE_APP, "4G RX 唤醒\r\n");
        flag_4G_recdata = 1;
        delaysleep_count = 3;
}
extern uint16_t ip0,ip1,ip2,ip3,port;
extern uint8_t gps_4g_flag;
extern uint8_t gps_need_data_flag,gps_open_flag;
uint8_t motor_power_state=1,uwb_state,air780_power_state,gps_success_state,red_charge_state,green_charge_state,air780_success_state,first_motor_in_flag;
void Program_Init(void)
{
    Usart1ParseDataCallback = UsartParseDataHandler;//需改为默认为gps处理，UsartParseDataHandler为升级处理当调试时候改为
    Usart1ParseDataCallback = Usart1ParseDataHandler;//需改为默认为gps处理，Usart1ParseDataHandler为升级处理当调试时候改为
      Usart0ParseDataCallback=Usart0ParseDataHandler;
    parameter_init_anchor();//g_com_map表初始化角色默认为基站
    dev_id=g_com_map[DEV_ID];//这里不太对
    group_id=g_com_map[GROUP_ID];//组ID
//    tag_frequency = 1000/g_com_map[COM_INTERVAL];//测距频率这个存的是测距时间
    memcpy(&disoffset,&g_com_map[DIST_OFFSET],2);
//    g_com_map[ALARM_DISTANCE1] = 40;
//    g_com_map[ALARM_DISTANCE2] = 40;
    warning_distance=g_com_map[ALARM_DISTANCE1];
    prewarning_distance=g_com_map[ALARM_DISTANCE2];
    send_struct.warnDistence=warning_distance;
    send_struct.alarmDistence=prewarning_distance;//更新报警距离
    memcpy(&send_struct.gunLableId,&g_com_map[BIND_DEV_ID],2);//更新绑定ID
    send_struct.tagId=dev_id;//更新设备ID

    if(g_com_map[BIND_DEV_ID]==0)
    {
        UWB_work_state = UN_BIND;
    }else{
        UWB_work_state = SEARCH_DEV;
    }
      //g_com_map[SEND_4G_SECOND]
    if(g_com_map[SEND_4G_SECOND]<30)
      {
      gps_open_flag=0;
      }else{
      gps_open_flag=1;
      }
    g_com_map[MODBUS_MODE] = 0;
      log_4g_enable_flag=g_com_map[LOG_4G_ENABLE];
    ip0 = (g_com_map[TCP_IP_0]>>12&0xf)*1000+(g_com_map[TCP_IP_0]>>8&0xf)*100+(g_com_map[TCP_IP_0]>>4&0xf)*10+(g_com_map[TCP_IP_0]&0xf);
@@ -480,81 +151,13 @@
    ip3 = (g_com_map[TCP_IP_3]>>12&0xf)*1000+(g_com_map[TCP_IP_3]>>8&0xf)*100+(g_com_map[TCP_IP_3]>>4&0xf)*10+(g_com_map[TCP_IP_3]&0xf);
    port = g_com_map[TCP_PORT];
    g_com_map[VERSION] = (1<<8)|0;
       gpio_pin_set(CHANGE_UART_PIN);//；拉高打印输出
    LOG_INFO(TRACE_MODULE_APP,"设备ID: %x .\r\n",dev_id);
    LOG_INFO(TRACE_MODULE_APP,"固件版本:4G-GPS定位手环 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
    LOG_INFO(TRACE_MODULE_APP,"固件版本:MK_无感闸机 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
    LOG_INFO(TRACE_MODULE_APP,"服务器地址: %d.%d.%d.%d:%d.\r\n",ip0,ip1,ip2,ip3,port);
}


void uart_change_check(uint16_t gpio_state)
{
   if(INPUT_5V_POSITION&gpio_state)
      {
              if(state5v==0)
        {
            state5v=1;
            state5V_prase_flag=state5v;
            gps_prase_flag=0;//解除gps解析
            uart1_change_from_gps_to_debug();//测试
                  PCA9555_Set_One_Value_Output(MCU_A,1);//输出高电平切换为5V输入
        } 
      }else {
        if(state5v==1)
        {
            g_com_map[MODBUS_MODE] = 0;
            state5v=0;
            state5V_prase_flag=state5v;
            gps_prase_flag=1;//恢复gps解析
            uart1_change_from_debug_to_gps();//测试
                  PCA9555_Set_One_Value_Output(MCU_A,0);//输出低电平切换为GPS
        }
         }
}
void IdleTask(void)
{
if(read_5v_input_pca())
      {
              if(state5v==0)
        {
            state5v=1;
            state5V_prase_flag=state5v;
            gps_prase_flag=0;//解除gps解析
            uart1_change_from_gps_to_debug();//测试
                  PCA9555_Set_One_Value_Output(MCU_A,1);//输出高电平切换为5V输入
        } 
      }else {
        if(state5v==1)
        {
            g_com_map[MODBUS_MODE] = 0;
            state5v=0;
            state5V_prase_flag=state5v;
            gps_prase_flag=1;//恢复gps解析
            uart1_change_from_debug_to_gps();//测试
                  PCA9555_Set_One_Value_Output(MCU_A,0);//输出低电平切换为GPS
        }
         }
      UART_CheckReceive();
}
int bind_check(void)
{
    if(g_com_map[BIND_DEV_ID]!=0x00)
    {
        return 1;
//绑定信息为1说明设备已经被下发绑定
    } else {
        return 0;
//绑定信息为0说明设备未被绑定
    }
}
void check_if_in_search(void)
{
    if(link_success_flag==1) { //如果第一次测距收包成功那么则进入连接测距模式
        UWB_work_state=LINK_SUCCESS;
    } else { //否则进入搜索模式
        UWB_work_state=SEARCH_DEV;
        if(first_search_flag==0)
            first_search_flag=1;
    }
      while(uart_tx_in_progress(UART_ID0));
      gpio_pin_clr(CHANGE_UART_PIN);//；拉低输入
			
}
void boot_deinit(void)
{
@@ -568,185 +171,281 @@
    uart_close(UART_ID1);//解绑原来串口1
    uart_close(UART_ID0);//解绑原来串口0
}
uint8_t flag_4guart_needinit=0;
uint8_t index1,index2,index3;
int16_t Voltage_input;
int tt2;
int test1,test3;
uint32_t test4;

int main(void)
void IdleTask(void)
{
//if(read_5v_input_pca())
//      {
//              if(state5v==0)
//        {
//            state5v=1;
//            state5V_prase_flag=state5v;
//            gps_prase_flag=0;//解除gps解析
//            uart1_change_from_gps_to_debug();//测试
//                  PCA9555_Set_One_Value_Output(MCU_A,1);//输出高电平切换为5V输入
//        } 
//      }else {
//        if(state5v==1)
//        {
//            g_com_map[MODBUS_MODE] = 0;
//            state5v=0;
//            state5V_prase_flag=state5v;
//            gps_prase_flag=1;//恢复gps解析
//            uart1_change_from_debug_to_gps();//测试
//                  PCA9555_Set_One_Value_Output(MCU_A,0);//输出低电平切换为GPS
//        }
//         }
      UART0_CheckReceive();
      UART_CheckReceive();
}
#define UT_TAG_ID (0xAAA1)
#define UT_SYNC_ANCHOR_ID (0xAAA2)
#define UT_ANCHOR_ID0 (0xAAA3)
#define UT_ANCHOR_ID1 (0xAAA4)
#define UT_ANCHOR_ID2 (0xAAA5)

#define UT_TX_DEV_NUM_MAX 3

struct UL_TDOA_DEV_INF_T
{
    uint16_t dev_id;
    uint64_t tx_timestamp;
    uint64_t rx_timestamp;
};

static struct UL_TDOA_DEV_INF_T ul_tdoa_dev_list[UT_TX_DEV_NUM_MAX] = {0};

//*****************************************************************************
//
// WSF buffer pools.
//
//*****************************************************************************
#define WSF_BUF_POOLS 5

// Default pool descriptor.
static wsfBufPoolDesc_t poolDescriptors[WSF_BUF_POOLS] = {
    {32, 26}, {64, 24}, {128, 4}, {256 + 32, 4}, {1024 + 32, 2},
};

static void app_ul_tdoa_report_callback(void *report)
{
    struct UL_TDOA_MEASUREMENT_T *rpt = (struct UL_TDOA_MEASUREMENT_T *)report;

    uint16_t peer = READ_SHORT(rpt->dev_id);
    uint16_t local = uwbs_local_short_addr_get();

    LOG_INFO(TRACE_MODULE_APP | TRACE_NO_OPTION, "\r\n");
    LOG_INFO(TRACE_MODULE_APP, "Frame type %u, Frame number %u\r\n", rpt->frame_type, rpt->frame_number);
    LOG_INFO(TRACE_MODULE_APP, "Peer %X, Local %X, TX timestamp 0x%02x%02x%02x%02x%02x%02x%02x%02x, RX timestamp 0x%02x%02x%02x%02x%02x%02x%02x%02x\r\n", peer,
             local, rpt->tx_timestamp.ts_u8[7], rpt->tx_timestamp.ts_u8[6], rpt->tx_timestamp.ts_u8[5], rpt->tx_timestamp.ts_u8[4], rpt->tx_timestamp.ts_u8[3],
             rpt->tx_timestamp.ts_u8[2], rpt->tx_timestamp.ts_u8[1], rpt->tx_timestamp.ts_u8[0], rpt->rx_timestamp.ts_u8[7], rpt->rx_timestamp.ts_u8[6],
             rpt->rx_timestamp.ts_u8[5], rpt->rx_timestamp.ts_u8[4], rpt->rx_timestamp.ts_u8[3], rpt->rx_timestamp.ts_u8[2], rpt->rx_timestamp.ts_u8[1],
             rpt->rx_timestamp.ts_u8[0]);

    LOG_INFO(TRACE_MODULE_APP, "Clock SYNC offset %lld\r\n", (rpt->rx_timestamp.ts_u64 - rpt->tx_timestamp.ts_u64)); // need to be corrected by ToF

    uint8_t dev_found = 0;
    for (int i = 0; i < UT_TX_DEV_NUM_MAX; i++)
    {
        if (peer == ul_tdoa_dev_list[i].dev_id)
        {
            LOG_INFO(TRACE_MODULE_APP, "Clock offset %d (15.65ps) in 1s\r\n",
                     (int32_t)((rpt->rx_timestamp.ts_u64 - ul_tdoa_dev_list[i].rx_timestamp) - (rpt->tx_timestamp.ts_u64 - ul_tdoa_dev_list[i].tx_timestamp)));
            ul_tdoa_dev_list[i].tx_timestamp = rpt->tx_timestamp.ts_u64;
            ul_tdoa_dev_list[i].rx_timestamp = rpt->rx_timestamp.ts_u64;
            dev_found = 1;
            break;
        }
    }

    // add device into the list
    if (dev_found == 0)
    {
        for (int i = 0; i < UT_TX_DEV_NUM_MAX; i++)
        {
            if (0 == ul_tdoa_dev_list[i].dev_id)
            {
                ul_tdoa_dev_list[i].dev_id = peer;
                ul_tdoa_dev_list[i].tx_timestamp = rpt->tx_timestamp.ts_u64;
                ul_tdoa_dev_list[i].rx_timestamp = rpt->rx_timestamp.ts_u64;
                break;
            }
        }
    }
}

static void board_init(void)
{
    // Clock configuration
    board_clock_run();
    boot_deinit();
      boot_deinit();
    // Pin configuration
    board_pins_config();
   board_debug_console_open_baud(TRACE_PORT_UART1,BAUD_115200);
    // Trace configuration
    board_debug_console_open_baud(TRACE_PORT_UART0,BAUD_115200);
    // Reset reason
    reset_cause_get();
    reset_cause_clear();
//注意串口一波特率改为9600了为了能和GPS通信上
    // Load calibration parameters from NVM
    uint32_t internal_flash = (REG_READ(0x40000018) >> 17) & 0x1;
    uint32_t external_flash = (REG_READ(0x40010030) >> 28) & 0x3;
    if (internal_flash || external_flash == 1)
    {
        WsfNvmInit();
        board_calibration_params_load();
        flash_close(FLASH_ID0);
    }
    else
    {
        board_calibration_params_default();
    }

    // Load calibration parameters
    board_calibration_params_load();

    // Chip calibration
    calib_chip();

    // Configure IO_02 for role selection
    gpio_open();
//    gpio_pin_set_dir(IO_PIN_2, GPIO_DIR_IN, 0);
//    io_pull_set(IO_PIN_2, IO_PULL_UP, IO_PULL_UP_LEVEL1);

   // board_led_init();
     Program_Init();
      uart_open(UART_ID1, &test_uart_cfg);
    uart_receive(UART_ID1,m_EUART1_DMA_RXBuf,EUART1_RX_BUF_SIZE,uart1_receive_callback);
    uart_receive(UART_ID0,m_EUART0_DMA_RXBuf,EUART0_RX_BUF_SIZE,uart0_receive_callback);
    board_configure();
}

int main(void)
{
    // Initialize MCU system
    board_init();

    // Disable watchdog timer
    wdt_close(WDT_ID0);
    LOG_INFO(TRACE_MODULE_APP, "UWB simple example\r\n");
    LOG_INFO(TRACE_MODULE_APP, "UL-TDoA example\r\n");

    // open system timer
    //sys_timer_open();
      // TODO 4G
    Uart_Register(UART_ID_4G, UART_ID0);
    Internet_Init();
    TCPClient_Init();
    gpio_open();
      LED_output_init();//配置adcGND引脚
      IIC2_Init();
    Accelerometer_Init();
      PCA9555_init();
 
		
      AIR780E_Reset(); 
//      battery_monitor_open();
//      Voltage_input=battery_monitor_get();
//      battery_monitor_close();
	
    adc_open(&usr_adc_cfg);
		
    
		
		
      if(!read_5v_input_pca())
      {
     Set4LEDColor(BLUE,GREEN,WHITE,GREEN);
     delay_ms(500);
     Set4LEDColor(RED,WHITE,RED,WHITE);
     delay_ms(500);		
     //Set4LEDColor(LEDOFF,LEDOFF,LEDOFF,LEDOFF);       
    // Platform init for WSF
    PalSysInit();

    // Initialize os
    WsfOsInit();
    mk_timer_list_init();

    //
    // Initialize a buffer pool for WSF dynamic memory needs.
    //
    uint32_t wsfBufMemLen = WsfBufInit(WSF_BUF_POOLS, poolDescriptors);

    if (wsfBufMemLen > FREE_MEM_SIZE)
    {
        LOG_INFO(TRACE_MODULE_APP, "Memory pool is not enough %d\r\n", wsfBufMemLen - FREE_MEM_SIZE);
    }
         //IO_control_init();
//    io_pin_mux_set(SCL_PIN, IO_FUNC0);//测试测距波形
//    gpio_pin_set_dir(SCL_PIN , GPIO_DIR_IN, 0);
//    io_pull_set(SCL_PIN , IO_PULL_UP, IO_PULL_UP_LEVEL4);
    //gps_air780_power_change(0,1);//开启gps，4G 
//加速度计初始化必须在IO_control_init之前因为复用SDA引脚
         Program_Init();
    //uart_open(UART_ID1, &test_uart_cfg);
   // uart1_change_from_gps_to_debug();   
    //Uart1GpsRecDebugSend();   
    uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
   
// Initialize low power mode
    power_init();
      //AIR780E_Reset(); //4G模块重启，耗时1.5秒,这个是无法同步的关键
    sleep_timer_open(true, SLEEP_TIMER_MODE_RELOAD, sleep_timer_callback);
    //sleep_timer_start(__MS_TO_32K_CNT(g_com_map[COM_INTERVAL]));//测试
    sleep_timer_start(__MS_TO_32K_CNT(SLEEP_TIMER_NUM));//测试
 //   board_5V_input_init(voltage_input_handler);
         PCA9555_Set_One_Value_Output(ADC_MINIUS,0);//拉低
       adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
    board_acceleration_detection_init(move_handler);
      pca_input_detection_init(pca_handler);//pca检测输入
		
      //board_4GUsart_detection_init(_4gUsart_handler);
      Uwb_init();
      OpenUWB();
		
		
    while (1)
    { 
         uwb_app_poll();
			
//         if(!power_low_flag)//确认是否休眠下才开启功能
//         {
        if(flag_TCP_reconnectting||IfTCPConnected())
        {
//        //    LOG_INFO(TRACE_MODULE_APP, "处理4G任务\r\n");
//           
////            if(flag_4guart_needinit)
////            {
////                flag_4guart_needinit = 0;
////                AIR780EUartInit();
////            }//yuan
                 if(flag_4G_recdata==1)
            {
                flag_4G_recdata = 2;
               
                //LOG_INFO(TRACE_MODULE_APP, "运行Socket_RecvAll tt2 %d\r\n",tt2);
                Socket_RecvAll();
            }
            Internet_Poll();
            HIDO_ATLitePoll();
            HIDO_TimerPoll();
            TCPClient_Poll();

        }
//      }
        if(flag_secondtask)
        {
            flag_secondtask = 0;
            SecondTask();
					
        }
            PowerTask();
//            IMUTask();
            UserKeyTask();
        IdleTask();
#ifndef DEBUG_MODE
//if(flag_sleeptimer)
//        if(!gps_need_data_flag&&!gpio_pin_get_val(INPUT_5V_Pin)&&((IfTCPConnected()&&Socket_IsSendQueueEmpty(0))||!flag_TCP_reconnectting&&!IfTCPConnected())) //进入休眠条件（与关系，全满足才进）：1.没有5V输入 2 TCP已连接时发送队列为空||TCP无连接时不在重连状态。
//        {
//                 if(!flag_4guart_needinit)
//            {
//                           LOG_INFO(TRACE_MODULE_APP, "4G RX 中断打开\r\n");
//                             board_4GUsart_detection_init(_4gUsart_handler);
    //
    // Create app task
    //
    wsfHandlerId_t handlerId = WsfOsSetNextHandler(app_handler);
    app_init(handlerId);

//            }
//               flag_sleeptimer =0;
            //LOG_INFO(TRACE_MODULE_APP, "进入休眠\r\n");
//                flag_4guart_needinit = 1;
    //
    // Create Uplink TDoA task
    //
    handlerId = WsfOsSetNextHandler(ul_tdoa_handler);
    ul_tdoa_init(handlerId);

//        trace_flush();
//        uint32_t lock = int_lock();
//        //LOG_INFO(TRACE_MODULE_APP, "进入低功耗");
//        power_enter_power_down_mode(0);
//        int_unlock(lock);
//        }//yuan
    uwb_open();

            if(delaysleep_count==0)
        if(!gps_power_state&&!gpio_pin_get_val(INPUT_5V_Pin)&&((IfTCPConnected()&&AIR780E_IsIPIdle()&&Socket_IsSendQueueEmpty(0))||((!flag_TCP_reconnectting)&&!IfTCPConnected())||power_low_flag)) 
        {
//               test1=gpio_pin_get_val(_4G_USART_RX_Pin);
            uint32_t lock;
            //flag_4guart_needinit = 1;
//            Internet_Poll();
//            HIDO_ATLitePoll();
//            HIDO_TimerPoll();
//            TCPClient_Poll();
            
           // delay_us(300000);
            trace_flush();
            lock = int_lock();            
            power_enter_power_down_mode(0);
                  uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
//               test3=gpio_pin_get_val(_4G_USART_RX_Pin);
               //LOG_INFO(TRACE_MODULE_APP, "进入休眠\r\n");
            int_unlock(lock);
        }
    // set advanced parameters
    struct PHY_ADV_CONFIG_T adv_config =
    {
        .thres_fap_detect = 40,
        .nth_scale_factor = 1,
        .ranging_performance_mode = 0,
#if RX_ANT_PORTS_NUM == 4
        .skip_weakest_port_en = 1,
#else
        .skip_weakest_port_en = 0,
#endif
    };
    phy_adv_params_configure(&adv_config);

    uwbs_init();
    uwb_app_config.ranging_flow_mode = (uint8_t)(RANGING_FLOW_CUSTOM);
    uwb_app_config.session_param.tx_power_level = board_param.tx_power_fcc[CALIB_CH(uwb_app_config.ppdu_params->ch_num)];
    uwb_app_config.ppdu_params->rx_main_ant = (uint8_t)(RX_MAIN_ANT_PORT);
    uwb_app_config.ppdu_params->rx_ant_mode = (uint8_t)(RX_ANT_PORTS_COMBINATION);

    // Initialize OWR session
    uint32_t session_id = 0x0001;
    uwbapi_session_init(session_id, SESSION_TYPE_RANGING);

    // Initialize OWR parameters
    struct APP_CFG_PARAM_T param = {0};
    param.ch_num = UWB_CH_NUM;
    param.prf_mode = UWB_MEAN_PRF;
    param.preamble_code_index = UWB_PREAMBLE_CODE_IDX;
    param.preamble_duration = UWB_PREAMBLE_DURATION;
    param.sfd_id = UWB_SFD_ID;
    param.psdu_data_rate = UWB_PSDU_DATA_RATE;
    param.sts_segment_num = UWB_STS_SEGMENT_NUM;
    param.sts_segment_len = UWB_STS_SEGMENT_LEN;
    param.aoa_result_req = 0;
    param.rframe_config = UWB_RFRAME_TYPE;
    param.sts_config = STS_STATIC;
    param.multi_node_mode = ONE_TO_MANY;
    param.ranging_round_usage = OWR_UL_TDOA;
    param.mac_address_mode = ADDR_SHORT_USE_SHORT;
    param.result_report_config = 0x0F;
    param.ranging_round_control = 0x3;

    param.ul_tdoa_tx_interval = UWB_UL_TDOA_INTERVAL;
    param.ul_tdoa_random_window = UWB_UL_TDOA_RAND_WINDOW;

    param.ul_tdoa_ntf_report_config[0] = 0;
    param.ul_tdoa_ntf_report_config[1] = 1;
    param.ul_tdoa_ntf_report_config[2] = 0;

    param.ul_tdoa_device_id[0] = 0x01;

    // Select role by IO_02
    if (1)
    {
#if 1
        param.device_role = DEV_ROLE_UT_SYNC_ANCHOR;
        param.ul_tdoa_device_id[1] = UT_SYNC_ANCHOR_ID & 0xff;
        param.ul_tdoa_device_id[2] = (UT_SYNC_ANCHOR_ID >> 8) & 0xff;
#else
        param.device_role = DEV_ROLE_UT_TAG;
        param.ul_tdoa_device_id[1] = UT_TAG_ID & 0xff;
        param.ul_tdoa_device_id[2] = (UT_TAG_ID >> 8) & 0xff;
#endif
    }
    else
    {
        param.device_role = DEV_ROLE_UT_ANCHOR;
        param.ul_tdoa_device_id[1] = UT_ANCHOR_ID0 & 0xff;
        param.ul_tdoa_device_id[2] = (UT_ANCHOR_ID0 >> 8) & 0xff;
    }

    // local address
    param.src_dev_mac_addr[0] = param.ul_tdoa_device_id[1];
    param.src_dev_mac_addr[1] = param.ul_tdoa_device_id[2];

    param.ul_tdoa_tx_timestamp = 0x02; // 64-bit TX timestamp

    // Configure ranging parameters
    uwbapi_session_set_app_config(session_id, &param);

    // Start TDoA
    uwbapi_session_start(session_id, app_ul_tdoa_report_callback);

    // Initialize low power mode
    power_init();

#if LOW_POWER_EN
    power_mode_request(POWER_UNIT_USER, POWER_MODE_POWER_DOWN);
#else
    power_mode_request(POWER_UNIT_USER, POWER_MODE_SLEEP);
#endif

    while (1)
    {
        wsfOsDispatcher();
        power_manage();
            IdleTask();
    }
}

void app_restore_from_power_down(void)
{
}