刚解决完网关下发会导致异常问题，但蓝牙那边mk给蓝牙发未配置成功未解决，开始调lora功耗

chen

3 天以前 b13574876322e59f75f26ac38f72c6b19c9d4aba

 keil/include/src/Radio/lora_1268.c

@@ -370,7 +370,8 @@
//   gpio_pin_clr(LORA_IRQ);
   //gpio_pin_clr(LORA_NRST);
   //gpio_pin_clr(LORA_NRST);//lora休眠
    Radio.Standby();
//    Radio.Standby();
	
    Radio.Sleep();
}
////States_t State = LOWPOWER;
@@ -396,8 +397,9 @@
      
    if(flag_writepara_needreset) //配置写入完成设备需要重启
    {
        printf("网关下发配置写入完成，重启");
        SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader   
        LOG_INFO(TRACE_MODULE_APP,"网关下发配置写入完成,重启\r\n");
//        SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader   
         sys_reset(0);
    }
    Radio.Standby();
    if(LoraUp_flag)
@@ -445,6 +447,7 @@
uint8_t rxdone=0;
extern uint16_t set_mk_time;
extern mk_send_message_to_BLE(void);
uint8_t tt4=1;
void OnRxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr )
{  
            uint16_t checksum1;
@@ -522,6 +525,7 @@
                                             LoraSendComMap(WGRSP_RWTAG_READ);
                                             break;
                                    case WGRSP_RWTAG_WRITE:

                                          rec_index = RX_Buffer[PWTAG_WRITE_IDX_IDX];
                                       switch(rec_index)
                                             {
@@ -534,18 +538,17 @@
                        default :
                            memcpy(&rec_value,&RX_Buffer[PWTAG_WRITE_VALUE_IDX],2);
                            g_com_map[rec_index/2] = rec_value;
//                                          if(rec_index/2==POWER)//新增判断
//                                          {
//                                           memcpy(&set_mk_time,&RX_Buffer[PWTAG_WRITE_VALUE_IDX],2);
//                                             //mk_send_message_to_BLE();   //发送给蓝牙
//                                             //LOG_INFO(TRACE_MODULE_APP, "修改成功g_com表为%#x,时间为%#x\r\n",g_com_map[POWER],set_mk_time);
//                                          }
                           // save_com_map_to_flash();
                                          if(rec_index/2==POWER)//新增判断
                                          {
                                           memcpy(&set_mk_time,&RX_Buffer[PWTAG_WRITE_VALUE_IDX],2);
                                             mk_send_message_to_BLE();   //发送给蓝牙
                                             //LOG_INFO(TRACE_MODULE_APP, "修改成功g_com表为%#x,时间为%#x\r\n",g_com_map[POWER],set_mk_time);
                                          }
                            save_com_map_to_flash();
                            LoraRspWriteCommap(SUBMSG_WRITE_ANCPARA);
                            flag_writepara_needreset = 1;
                            no_rx_flag = 1;                           
                                             }

                                             break; 
                                    case WGRSP_RWTAG_UPDATE:
                                    rec_index = RX_Buffer[PWTAG_WRITE_IDX_IDX];
@@ -571,7 +574,7 @@
                        }

                     }
LOG_INFO(TRACE_MODULE_APP, "进入回复2\r\n");						
			
    if(!no_rx_flag)
    {
        if(lora_jianting_flag&&LoraUp_flag==0)
@@ -580,6 +583,7 @@
            Radio.Rx(0);
        }
    }
		
}

void OnTxTimeout( void )