ChinaUWBProject.git

			@@ -29,6 +29,7 @@
			extern int simple_main(void);
			extern int temp_main(void);
			void boot_deinit(void);
			void upload_apppoll();
			#define TEST_UART_POLL_MODE 0
			#define TEST_UART_INTERUPT_MODE 1
			#define TEST_UART_DMA_MODE 2
			@@ -42,8 +43,8 @@


			#define UWB_OPEN_COUNT 1
			#define UWB_MEASUREMENT_INTERVAL 3
			#define UWB_MEASUREMENT_INTERVAL_SLEEP 60
			#define UWB_MEASUREMENT_INTERVAL 5
			#define UWB_MEASUREMENT_INTERVAL_SLEEP 30

			extern uint8_t mUsartReceivePack[100];
			extern uint8_t mUsart2ReceivePack[150];
			@@ -78,11 +79,7 @@
			} Operation_step;

			Operation_step UWB_work_state;
			// 定义状态
			typedef enum {
			STATE_NORMAL, // 正常状态，3秒测距上传一次
			STATE_SLEEP // 休眠状态，1分钟测距上传一次
			} CountState_t;


			uint32_t uwb_time_count = 0; // 定时器计数值
			//uint32_t step_count = 0; // 步数计数
			@@ -306,7 +303,7 @@
			}
			uint8_t tt=1;
			uint8_t flag_sleeptimer,flag_secondtask,secondtask_count,log_4g_enable_flag;
			uint8_t uwb_enable_flag=0;
			uint8_t uwb_offtime_count=0;
			uint8_t input5v_time;
			extern uint8_t taglist_num;
			uint8_t gps_ntripsend;
			@@ -316,6 +313,15 @@
			{
			input5v_time=1;
			flag_secondtask = 1;
			#ifdef UWB_1_5HZ
			uwb_time_count++;
			#endif
			uwb_offtime_count++;
			if(uwb_offtime_count>60)
			{
			uwb_offtime_count=0;
			current_state = STATE_SLEEP;
			}
			if(!read_5v_input_pca())
			{
			if(bat_percent>15)
			@@ -332,10 +338,11 @@
			input5v_time=1;
			if(taglist_num==0)
			{
			CloseUWB();
			Uwb_init();
			OpenUWB();
			// CloseUWB();
			// Uwb_init();
			// OpenUWB();
			}
			upload_apppoll();
			}else{
			flag_secondtask = 0;
			}
			@@ -426,7 +433,7 @@
			}
			g_com_map[MODBUS_MODE] = 0;
			log_4g_enable_flag=g_com_map[LOG_4G_ENABLE];
			g_com_map[VERSION] = (1<<8)\|8;
			g_com_map[VERSION] = (1<<8)\|14;


			LOG_INFO(TRACE_MODULE_APP,"设备ID: %x .\r\n",dev_id);
			@@ -604,41 +611,48 @@
			}

			extern uint32_t uwb_time_count;
			uint8_t GPS_UPLOAD_FLAG=0;
			void upload_apppoll()
			{
			uint32_t elapsed_time_jibu;
			uint32_t elapsed_time_jibu;

			switch (current_state)
			{
			#ifdef UWB_1_5HZ
			case STATE_NORMAL:
			elapsed_time_jibu = uwb_time_count - state_start_time;
			switch(elapsed_time_jibu)
			{
			case UWB_OPEN_COUNT:
			CloseUWB();
			// uwbled = LEDOFF;
			UWBSendUDPTask();

			CloseUWB();
			break;

			case UWB_MEASUREMENT_INTERVAL:
			OpenUWB();
			state_start_time = uwb_time_count;
			taglist_num = 0;
			OpenUWB();
			// uwbled = WHITE;
			state_start_time = uwb_time_count;

			break;
			}
			break;

			#endif
			case STATE_SLEEP:
			elapsed_time_jibu = uwb_time_count - state_start_time;
			switch(elapsed_time_jibu)
			{
			case UWB_OPEN_COUNT:

			CloseUWB();
			CloseUWB();
			UWBSendUDPTask();
			break;

			case UWB_MEASUREMENT_INTERVAL_SLEEP:

			OpenUWB();
			state_start_time = uwb_time_count;
			taglist_num = 0;
			OpenUWB();
			state_start_time = uwb_time_count;
			break;
			}
			break;
			@@ -700,6 +714,7 @@
			IIC2_Init();
			Accelerometer_Init();
			PCA9555_init();
			WT588E02B_Init();
			adc_open(&usr_adc_cfg);
			uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
			power_init();
			@@ -709,7 +724,9 @@
			adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
			pca_input_detection_init(pca_handler);//pca检测输入
			Uwb_init();
			OpenUWB();
			#ifdef UWB_CK
			OpenUWB();
			#endif
			// DBG_SetMode(DBG_MODE_SHELL);
			// Shell_Init();

			@@ -727,6 +744,9 @@
			gps_prase_flag=1;//恢复gps解析
			uart1_change_from_debug_to_gps();//测试
			PCA9555_Set_One_Value_Output(MCU_A,0);//输出低电平切换为GPS
			#ifdef UWB_CG
			CloseUWB();
			#endif
			while (1)
			{
			uwb_app_poll();
			@@ -743,7 +763,7 @@
			flag_secondtask = 0;
			SecondTask();
			}
			IMUTask();
			IMUTask();
			IdleTask();
			}
			}