ChinaUWBProject.git

对比新文件
			@@ -0,0 +1,239 @@
			/* LzmaDec.h -- LZMA Decoder
			2023-04-02 : Igor Pavlov : Public domain */

			#ifndef ZIP7_INC_LZMA_DEC_H
			#define ZIP7_INC_LZMA_DEC_H

			#include "7zTypes.h"

			EXTERN_C_BEGIN

			/* #define Z7_LZMA_PROB32 */
			/* Z7_LZMA_PROB32 can increase the speed on some CPUs,
			but memory usage for CLzmaDec::probs will be doubled in that case */

			typedef
			#ifdef Z7_LZMA_PROB32
			UInt32
			#else
			UInt16
			#endif
			CLzmaProb;

			/* ---------- LZMA Properties ---------- */

			#define LZMA_PROPS_SIZE 5

			typedef struct
			{
			Byte lc;
			Byte lp;
			Byte pb;
			Byte _pad_;
			UInt32 dicSize;
			} CLzmaProps;

			/* LzmaProps_Decode - decodes properties
			Returns:
			SZ_OK
			SZ_ERROR_UNSUPPORTED - Unsupported properties
			*/

			SRes LzmaProps_Decode(CLzmaProps p, const Byte data, unsigned size);

			/* ---------- LZMA Decoder state ---------- */

			/* LZMA_REQUIRED_INPUT_MAX = number of required input bytes for worst case.
			Num bits = log2((2^11 / 31) ^ 22) + 26 < 134 + 26 = 160; */

			#define LZMA_REQUIRED_INPUT_MAX 20

			typedef struct
			{
			/* Don't change this structure. ASM code can use it. */
			CLzmaProps prop;
			CLzmaProb *probs;
			CLzmaProb *probs_1664;
			Byte *dic;
			SizeT dicBufSize;
			SizeT dicPos;
			const Byte *buf;
			UInt32 range;
			UInt32 code;
			UInt32 processedPos;
			UInt32 checkDicSize;
			UInt32 reps[4];
			UInt32 state;
			UInt32 remainLen;

			UInt32 numProbs;
			unsigned tempBufSize;
			Byte tempBuf[LZMA_REQUIRED_INPUT_MAX];
			} CLzmaDec;

			#define LzmaDec_CONSTRUCT(p) \
			{ \
			(p)->dic = NULL; \
			(p)->probs = NULL; \
			}
			#define LzmaDec_Construct(p) LzmaDec_CONSTRUCT(p)

			void LzmaDec_Init(CLzmaDec *p);

			/* There are two types of LZMA streams:
			- Stream with end mark. That end mark adds about 6 bytes to compressed size.
			- Stream without end mark. You must know exact uncompressed size to decompress such stream. */

			typedef enum
			{
			LZMA_FINISH_ANY, /* finish at any point */
			LZMA_FINISH_END /* block must be finished at the end */
			} ELzmaFinishMode;

			/* ELzmaFinishMode has meaning only if the decoding reaches output limit !!!

			You must use LZMA_FINISH_END, when you know that current output buffer
			covers last bytes of block. In other cases you must use LZMA_FINISH_ANY.

			If LZMA decoder sees end marker before reaching output limit, it returns SZ_OK,
			and output value of destLen will be less than output buffer size limit.
			You can check status result also.

			You can use multiple checks to test data integrity after full decompression:
			1) Check Result and "status" variable.
			2) Check that output(destLen) = uncompressedSize, if you know real uncompressedSize.
			3) Check that output(srcLen) = compressedSize, if you know real compressedSize.
			You must use correct finish mode in that case. */

			typedef enum
			{
			LZMA_STATUS_NOT_SPECIFIED, /* use main error code instead */
			LZMA_STATUS_FINISHED_WITH_MARK, /* stream was finished with end mark. */
			LZMA_STATUS_NOT_FINISHED, /* stream was not finished */
			LZMA_STATUS_NEEDS_MORE_INPUT, /* you must provide more input bytes */
			LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK /* there is probability that stream was finished without end mark */
			} ELzmaStatus;

			/* ELzmaStatus is used only as output value for function call */

			/* ---------- Interfaces ---------- */

			/* There are 3 levels of interfaces:
			1) Dictionary Interface
			2) Buffer Interface
			3) One Call Interface
			You can select any of these interfaces, but don't mix functions from different
			groups for same object. */

			/* There are two variants to allocate state for Dictionary Interface:
			1) LzmaDec_Allocate / LzmaDec_Free
			2) LzmaDec_AllocateProbs / LzmaDec_FreeProbs
			You can use variant 2, if you set dictionary buffer manually.
			For Buffer Interface you must always use variant 1.

			LzmaDec_Allocate* can return:
			SZ_OK
			SZ_ERROR_MEM - Memory allocation error
			SZ_ERROR_UNSUPPORTED - Unsupported properties
			*/

			SRes LzmaDec_AllocateProbs(CLzmaDec p, const Byte props, unsigned propsSize, ISzAllocPtr alloc);
			void LzmaDec_FreeProbs(CLzmaDec *p, ISzAllocPtr alloc);

			SRes LzmaDec_Allocate(CLzmaDec p, const Byte props, unsigned propsSize, ISzAllocPtr alloc);
			void LzmaDec_Free(CLzmaDec *p, ISzAllocPtr alloc);

			/* ---------- Dictionary Interface ---------- */

			/* You can use it, if you want to eliminate the overhead for data copying from
			dictionary to some other external buffer.
			You must work with CLzmaDec variables directly in this interface.

			STEPS:
			LzmaDec_Construct()
			LzmaDec_Allocate()
			for (each new stream)
			{
			LzmaDec_Init()
			while (it needs more decompression)
			{
			LzmaDec_DecodeToDic()
			use data from CLzmaDec::dic and update CLzmaDec::dicPos
			}
			}
			LzmaDec_Free()
			*/

			/* LzmaDec_DecodeToDic

			The decoding to internal dictionary buffer (CLzmaDec::dic).
			You must manually update CLzmaDec::dicPos, if it reaches CLzmaDec::dicBufSize !!!

			finishMode:
			It has meaning only if the decoding reaches output limit (dicLimit).
			LZMA_FINISH_ANY - Decode just dicLimit bytes.
			LZMA_FINISH_END - Stream must be finished after dicLimit.

			Returns:
			SZ_OK
			status:
			LZMA_STATUS_FINISHED_WITH_MARK
			LZMA_STATUS_NOT_FINISHED
			LZMA_STATUS_NEEDS_MORE_INPUT
			LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
			SZ_ERROR_DATA - Data error
			SZ_ERROR_FAIL - Some unexpected error: internal error of code, memory corruption or hardware failure
			*/

			SRes LzmaDec_DecodeToDic(CLzmaDec p, SizeT dicLimit, const Byte src, SizeT srcLen, ELzmaFinishMode finishMode, ELzmaStatus status);

			/* ---------- Buffer Interface ---------- */

			/* It's zlib-like interface.
			See LzmaDec_DecodeToDic description for information about STEPS and return results,
			but you must use LzmaDec_DecodeToBuf instead of LzmaDec_DecodeToDic and you don't need
			to work with CLzmaDec variables manually.

			finishMode:
			It has meaning only if the decoding reaches output limit (*destLen).
			LZMA_FINISH_ANY - Decode just destLen bytes.
			LZMA_FINISH_END - Stream must be finished after (*destLen).
			*/

			SRes LzmaDec_DecodeToBuf(CLzmaDec p, Byte dest, SizeT destLen, const Byte src, SizeT srcLen, ELzmaFinishMode finishMode, ELzmaStatus status);

			/* ---------- One Call Interface ---------- */

			/* LzmaDecode

			finishMode:
			It has meaning only if the decoding reaches output limit (*destLen).
			LZMA_FINISH_ANY - Decode just destLen bytes.
			LZMA_FINISH_END - Stream must be finished after (*destLen).

			Returns:
			SZ_OK
			status:
			LZMA_STATUS_FINISHED_WITH_MARK
			LZMA_STATUS_NOT_FINISHED
			LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK
			SZ_ERROR_DATA - Data error
			SZ_ERROR_MEM - Memory allocation error
			SZ_ERROR_UNSUPPORTED - Unsupported properties
			SZ_ERROR_INPUT_EOF - It needs more bytes in input buffer (src).
			SZ_ERROR_FAIL - Some unexpected error: internal error of code, memory corruption or hardware failure
			*/

			SRes LzmaDecode(Byte *dest,
			SizeT *destLen,
			const Byte *src,
			SizeT *srcLen,
			const Byte *propData,
			unsigned propSize,
			ELzmaFinishMode finishMode,
			ELzmaStatus *status,
			ISzAllocPtr alloc);

			EXTERN_C_END

			#endif