加入shell模式跟ntrip。目前没有调试好，等外包改一下

WXK

2025-03-12 d5d1ca2ebf9087415d3d11907cd79ba58162760e

 keil/include/drivers/serial_at_cmd_app.c

@@ -10,7 +10,7 @@
#include "board.h"
//#include "Spi.h"
//#include "radio.h"

#include "DBG.h"


//#define EUART_RX_BUF_SIZE 100
@@ -20,6 +20,8 @@

uint8_t mUsartReceivePack[100] = {0};
uint8_t mUsart2ReceivePack[150] = {0};
uint8_t GPS_GGAmessage[150]={0};
uint8_t GPS_GSVmessage[150]={0};
double jd,wd;
int analysis_num,pos_state;
uint8_t state5V_prase_flag=1,gps_prase_flag=1;
@@ -27,10 +29,9 @@
extern void IO_control_init(void);
extern void blink_led(uint8_t*state);
extern void updata_led_power_state(void);
extern uint8_t gps_success_state;
extern uint8_t gps_success_state,gps_open_flag;
extern uint8_t gps_success_state,gps_enable_flag,gps_need_data_flag,gps_timeout_flag,gps_power_state;
extern uint16_t gps_wait_count;
uint8_t gps_send_count=3;
typedef enum
{
    BLE_RECV_STATE_IDLE = 0,
@@ -137,6 +138,7 @@

}
double d_value;
uint8_t shell_receive_state;
void UsartParseDataHandler(uint8_t data)
{
    if(state5V_prase_flag&&!g_com_map[MODBUS_MODE])
@@ -145,7 +147,7 @@
        uint16_t checksum = 0;
        static uint8_t pack_datalen = 0,pack_length = 0,pack_index = 0,pack_msgtype = 0,pack_cmd = CMD_READ;
        static uint8_t index = 0;

//uint8_t shell_receive_state;



@@ -222,6 +224,16 @@
        } else if ((usart_receive_state == UsartReceiveWaitMsgType) && (data == 0x3)) {
            usart_receive_state = UsartReceiveWaitLength;
            pack_msgtype = data;
        } else if ((shell_receive_state == 0) && (data == 0x03)) {
            shell_receive_state = 1;
            uart_send(UART_ID1, data,1, NULL);
        } else if ((shell_receive_state == 1) && (data == 0x03)) {
            shell_receive_state = 2;
            uart_send(UART_ID1, data,1, NULL);
        } else if ((shell_receive_state == 2) && (data == 0x03)) {
          DBG_SetMode(DBG_MODE_SHELL);
            uart_send(UART_ID1, data,1, NULL);
            shell_receive_state=0;
        }
        else {
            usart_receive_state = UsartReceiveWaitHead0;
@@ -230,62 +242,49 @@
        }
    } else if(gps_prase_flag)
    {
        static uint8_t index = 0;
//        static uint8_t index = 0;
//GPS解析数据
//   static ST_BLERecv BLE_recvive;
        GGA_DataStruct jdrecv,wdrecv,Posstate;
        
        //接收数据开始分析
        mUsart2ReceivePack[index]  =  data; //char数组传进来参数data
        mUsart2ReceivePack_before  =  mUsart2ReceivePack_now;
        mUsart2ReceivePack_now=data;
        index++;
        if( mUsart2ReceivePack_before == 0x0D && mUsart2ReceivePack_now==0x0A )//接收数据到“0x0D 0x0A”结束
        {
            //解析该条GPS报文
           
            analysis_num=sscanf((char*)mUsart2ReceivePack,"$%[^,],%*[^,],%[^,],%*[^,],%[^,],%*[^,],%[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*s",gps_header,wdrecv.m_pData,jdrecv.m_pData,Posstate.m_pData);
            if(!memcmp(gps_header,"GNGGA",5))
            { 
//                if(g_com_map[MODBUS_MODE])
//                    LOG_INFO(TRACE_MODULE_APP,"%s", mUsart2ReceivePack);
             pos_state=atoi(Posstate.m_pData);   
               if(pos_state!=0)
            {
							
                //4g.jd=jd;
                //4g.wd=wd;
                       blink_led(&gps_success_state);
                wd=strtod(wdrecv.m_pData,NULL);
                jd=strtod(jdrecv.m_pData,NULL);
                gps_send_count--;
                gps_timeout_flag=0;//不超时接收状态
                
                gps_wait_count=0;//清0接收状态
                     if(gps_send_count==0){
                        gps_need_data_flag=0;//接收数据完成
                        TCPHeartBeatUpload();//上传GPS数据
                     gps_power_state=0;
                     update_led_power_state();
                        gps_send_count=3;
                     }
                     pos_state=0;//以防多次发生
								
								
//      gps_enable_flag=0;//收到有效数据关闭GPS
            
            }
               }						
            

            memset(mUsart2ReceivePack,0,sizeof(mUsart2ReceivePack));
            memset(wdrecv.m_pData,0,sizeof(wdrecv.m_pData));
            memset(jdrecv.m_pData,0,sizeof(jdrecv.m_pData));
            memset(Posstate.m_pData,0,sizeof(Posstate.m_pData));
            index=0;
            mUsart2ReceivePack_before=0;
            mUsart2ReceivePack_now=0;
        }
//        GGA_DataStruct jdrecv,wdrecv,Posstate;
        GPS_RecvFsm(data);
//        //接收数据开始分析
//        mUsart2ReceivePack[index]  =  data; //char数组传进来参数data
//        mUsart2ReceivePack_before  =  mUsart2ReceivePack_now;
//        mUsart2ReceivePack_now=data;
//        index++;
//        if( mUsart2ReceivePack_before == 0x0D && mUsart2ReceivePack_now==0x0A )//接收数据到“0x0D 0x0A”结束
//        {
//            //解析该条GPS报文
//           
//            analysis_num=sscanf((char*)mUsart2ReceivePack,"$%[^,],%*[^,],%[^,],%*[^,],%[^,],%*[^,],%[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*[^,],%*s",gps_header,wdrecv.m_pData,jdrecv.m_pData,Posstate.m_pData);
//            if(!memcmp(gps_header,"GNGGA",5))
//            { 
//                     memcpy(GPS_GGAmessage,mUsart2ReceivePack,strlen(mUsart2ReceivePack)-2);
//                   
//                    wd=strtod(wdrecv.m_pData,NULL);
//                    jd=strtod(jdrecv.m_pData,NULL);
//                              if(wd!=0)
//                    pos_state=atoi(Posstate.m_pData);
//                        if(pos_state!=0)
//                        {
//                        pos_state=0;//防止多次进入
//                        }
//						
//            }
////                  if(!memcmp(gps_header,"GBGSV",5))
////                  {memcpy(GPS_GSVmessage,mUsart2ReceivePack,strlen(mUsart2ReceivePack)-2);
////                  GPS_ParseGSV(GPS_GSVmessage,strlen(GPS_GSVmessage));
////						
////                  }
//            
//            memset(mUsart2ReceivePack,0,sizeof(mUsart2ReceivePack));
//            memset(wdrecv.m_pData,0,sizeof(wdrecv.m_pData));
//            memset(jdrecv.m_pData,0,sizeof(jdrecv.m_pData));
//            memset(Posstate.m_pData,0,sizeof(Posstate.m_pData));
//            index=0;
//            mUsart2ReceivePack_before=0;
//            mUsart2ReceivePack_now=0;
//        }
    }
}