lora能正常发送

zhangbo

2025-03-04 d9eeaa73e91eb757f8707e26f204f443fe956a3f

 keil/include/main/main.c

@@ -62,14 +62,15 @@
#include "HIDO_Timer.h"
#include "TCPClient.h"
#include "mk_spi.h"
#include "pan_port.h"
//#include "pan_port.h"
#include "mk_timer.h"
//#include "pan_param.h"
//#include "pan_rf.h"
#include "lora_3029.h"
#include "pan_rf.h"
#include "lora_1268.h"
//#include "pan_rf.h"
#include "PCA9555.h"
#include "mk_phy.h"
#include "HIDO_Timer.h"
#define DEBUG_MODE
extern int simple_main(void);
extern int temp_main(void);
@@ -553,218 +554,36 @@
/********************************************************************************************************/
/********************************************************************************************************/
/********************************************************************************************************/
static uint16_t delaytime = 771;
extern uint16_t wg_report_freq,wg_report_id;
extern uint32_t wg_lost_count;
extern uint8_t shengji_flag;
extern uint8_t lora_jianting_flag,report_ancnum;
uint8_t imu_enable,motor_enable;
uint32_t time_flag_lorarx=0;
uint32_t lora_huanxing_count=0;
uint16_t Lora_wangguanid=0;
//static uint16_t delaytime = 771;
//extern uint16_t wg_report_freq,wg_report_id;
//extern uint32_t wg_lost_count;
//extern uint8_t shengji_flag;
//extern uint8_t lora_jianting_flag,report_ancnum;
//uint8_t imu_enable,motor_enable;
//uint32_t time_flag_lorarx=0;
//uint32_t lora_huanxing_count=0;
//uint16_t Lora_wangguanid=0;
//wg_state_enum wg_state = WG_Lost;
//uint16_t wangguan_up_id;
//uint8_t LoraUp_flag;
//uint16_t rec_wenjian_daxiao;
//uint16_t recnum[3];
//uint16_t recv_flag=0;
//uint16_t tx_flag=0;
//uint16_t CRC16=0;
//uint16_t DEST_ID=0;
//uint16_t rec_value,rec_delaytime,rx_count,datalen_offset;
//uint16_t Loratx_flag=0;
//uint16_t Lorarx_flag=0;
//uint16_t Lorarx_time_out_flag=0;
//uint8_t tx_buf[5]={0,1,0,1,1};
//uint32_t sleep_time_count=0;
//uint32_t uwb_ceju_count=0;
wg_state_enum wg_state = WG_Lost;
uint16_t wangguan_up_id;
uint8_t LoraUp_flag;
uint16_t rec_wenjian_daxiao;
uint16_t recnum[3];
uint16_t recv_flag=0;
uint16_t tx_flag=0;
uint16_t CRC16=0;
uint16_t DEST_ID=0;
uint16_t rec_value,rec_delaytime,rx_count,datalen_offset;
uint16_t Loratx_flag=0;
uint16_t Lorarx_flag=0;
uint16_t Lorarx_time_out_flag=0;
uint8_t tx_buf[5]={0,1,0,1,1};
uint32_t sleep_time_count=0;
uint32_t uwb_ceju_count=0;
/********************************************************************************************************/
static void Lora_irq_handler(enum IO_PIN_T pin)
{
	    
         uint16_t checksum1;	
         rf_irq_process();

         no_rx_flag=0;
       tx_flag=rf_get_transmit_flag();
       recv_flag=rf_get_recv_flag();
         if(recv_flag == RADIO_FLAG_RXDONE)
        {
             rf_set_recv_flag(RADIO_FLAG_IDLE);
				
             memcpy(RX_Buffer,RxDoneParams.Payload,RxDoneParams.Size);
               BufferSize=RxDoneParams.Size;
                lora_huanxing_count++;
         if(RX_Buffer[MSG_TYPE_IDX]==LORA_MSGTYPE_RANGEPOLL)
    {
		            
                  uwb_open();

                     UwbRange();
				      
                  uwb_ceju_count++;
      }
//       if(RX_Buffer[0]==0x04,RX_Buffer[1]=='O',RX_Buffer[2]=='N',RX_Buffer[3]=='G')
//       {
//              gpio_pin_set(IO_PIN_5);//测试
////                     time_flag_lorarx=phy_timer_count_get();
//                  uwb_open();
//                  gpio_pin_clr(IO_PIN_5);
//                     UwbRange();
//				      
//                  uwb_ceju_count++;
//                   //rf_enter_continous_rx(); //重新进入接收模式
//                   //LORA_REV_uwb_up=1;
//                  }
             if(RX_Buffer[MSG_TYPE_IDX]==LORA_MSGTYPE_WGRESPTAG)
                  {
                     checksum1=Checksum_u16(RX_Buffer,BufferSize-2);
							
              memcpy(&DEST_ID,&RX_Buffer[DEST_ID_IDX],2);
                     memcpy(&CRC16,&RX_Buffer[BufferSize-2],2);
                     if(!memcmp(&checksum1,&RX_Buffer[BufferSize-2],2))
                     if(!memcmp(&dev_id,&RX_Buffer[DEST_ID_IDX],2))
                     {
                        memcpy(&source_id,&RX_Buffer[SOURCE_ID_IDX],2); 
                        if(wg_state==WG_Lost)
                           {
                            wg_state = WG_Connected;
                            wg_report_id = source_id;
                           }
                        if(!memcmp(&wg_report_id,&RX_Buffer[SOURCE_ID_IDX],2))
                        {
                              wg_lost_count = 0;
                              switch(RX_Buffer[PWTAG_RW_FLAG_IDX])
                              {
                                    case WGRSP_RWTAG_NONE:

//                        wg_report_freq = RX_Buffer[POLL_FREQ_IDX]+400;
//                        memcpy(&rec_delaytime,&RX_Buffer[NEXTPOLL_TIME_IDX],2);
//                        if(report_ancnum<2)
//                        {
//                            datalen_offset = report_ancnum*85;
//                        }else{
//                            datalen_offset = (report_ancnum-1)*46+85;
//                        }
//                        rec_secdelay = RX_Buffer[PWTAG_SECDELAY_IDX];
//                        if(BufferSize!=13||rec_secdelay>20)
//                        {
//                            rec_secdelay = 0;
//                        }
//                    
//                        sleep_time_count = rec_delaytime*3.2768 - delaytime-datalen_offset;
//                        while(sleep_time_count>=32768)
//                            sleep_time_count-=32768;
//                                    sleep_timer_start(sleep_time_count);

                        break;
                                    case WGRSP_RWTAG_READ:
                                             no_rx_flag = 1;
                                             LoraSendComMap(WGRSP_RWTAG_READ);
                                             break;
                                    case WGRSP_RWTAG_WRITE:
                                          rec_index = RX_Buffer[PWTAG_WRITE_IDX_IDX];
                                       switch(rec_index)
                                             {
                                                   case 0xdd:  //语音下发
                                                         break;
//                        case 0x20:  //蜂鸣
//                            memcpy(&rec_value,&RX_Buffer[PWTAG_WRITE_VALUE_IDX],2);
//                            motor_keeptime = rec_value;
//                            break;
                        default :
                            memcpy(&rec_value,&RX_Buffer[PWTAG_WRITE_VALUE_IDX],2);
                            g_com_map[rec_index/2] = rec_value;
                            save_com_map_to_flash();
                            LoraRspWriteCommap(SUBMSG_WRITE_ANCPARA);
                            //flag_writepara_needreset = 1;
                            no_rx_flag = 1;                           
                                             }

                                             break; 
                                    case WGRSP_RWTAG_UPDATE:
                                    rec_index = RX_Buffer[PWTAG_WRITE_IDX_IDX];
                                    switch(rec_index)
                                    {
                                          case 0xaa:  //升级下发
                                          memcpy(&rec_wenjian_daxiao,&RX_Buffer[WRITEPARA_VALUE_IDX],2);//文件大小
                                          if(rec_wenjian_daxiao>0XAC00||rec_wenjian_daxiao==0)
                                          {}//文件过大，超出范围
                                          else
                                          {
                                                memcpy(&wangguan_up_id,&RX_Buffer[SOURCE_ID_IDX],2);//网关ID 占用2个字节
                                                shengji_flag=1;
                                                LoraUp_flag=1;   
                                                imu_enable=0;                            
                                          }
//                            LoraUp_Poll();
                                                break;                        
                                    }
                                          break; 
                              }
                           }
                        }

                     }						
    if(!no_rx_flag)
    {
        if(lora_jianting_flag)
        {
                  uint32_t para;
//            SwitchLoraSettings(UWB_CHANNEL_FRQ+group_id,UWB_CHANNEL_SF,0);
            rf_set_mode(RF_MODE_STB3);
                  para=(UWB_CHANNEL_FRQ+group_id)*1000000;
                  rf_set_freq(para);	
                  rf_set_sf(UWB_CHANNEL_SF);
            rf_enter_continous_rx();
        }
    }
				
      }
         if(tx_flag == RADIO_FLAG_TXDONE)
        {
             //rf_set_mode(RF_MODE_STB3);
             rf_set_transmit_flag(RADIO_FLAG_IDLE);
             Loratx_flag++;
              rf_enter_single_timeout_rx(100);
        }
        if((recv_flag == RADIO_FLAG_RXTIMEOUT))
        {
               //这个超时接收是会自动重启的，所以必须将芯片状态置成STB3这样就退出了连续接收状态
                 rf_set_mode(RF_MODE_STB3);
               //这个超时接收是会自动重启的，所以必须将芯片状态置成STB3这样就退出了连续接收状态
                  Lorarx_time_out_flag++;
                 rf_set_recv_flag(RADIO_FLAG_IDLE);
                  rf_set_freq(UWB_CHANNEL_FRQ+group_id*10000000);
                  rf_set_sf(UWB_CHANNEL_SF);
               if(lora_jianting_flag)
               {
                  uint32_t para;
//            SwitchLoraSettings(UWB_CHANNEL_FRQ+group_id,UWB_CHANNEL_SF,0);
            rf_set_mode(RF_MODE_STB3);
                  para=(UWB_CHANNEL_FRQ+group_id)*1000000;
                  rf_set_freq(para);	
                  rf_set_sf(UWB_CHANNEL_SF);
            rf_enter_continous_rx();
                }
               //  rf_clr_irq(REG_IRQ_RX_TIMEOUT);
             //  rf_enter_single_timeout_rx(100);
        }
            if((recv_flag == RADIO_FLAG_RXERR))
            {
                rf_set_recv_flag(RADIO_FLAG_IDLE);
               if(lora_jianting_flag)
               {
                  uint32_t para;
//            SwitchLoraSettings(UWB_CHANNEL_FRQ+group_id,UWB_CHANNEL_SF,0);
            rf_set_mode(RF_MODE_STB3);
                  para=(UWB_CHANNEL_FRQ+group_id)*1000000;
                  rf_set_freq(para);	
                  rf_set_sf(UWB_CHANNEL_SF);
            rf_enter_continous_rx();
                }
            }
				
   RadioIrqProcess();				
}


@@ -800,113 +619,28 @@
    reset_cause_clear(); 
    // Chip calibration
    calib_chip();

    // Disable watchdog timer
    wdt_close(WDT_ID0);

    gpio_open();

    Board_gpio_init();
    //board_led_init();
    spi_init();
//      gpio_pin_clr(LORA_CS);
//      gpio_pin_clr(LORA_MOSI);
//      gpio_pin_clr(LORA_MISO);
//      gpio_pin_clr(LORA_CLK);
//      gpio_pin_set(LORA_CLK);
//      gpio_pin_set(LORA_DIO);

    Board_LORA_NVIC_Init(Lora_irq_handler);
      Lora_init();
      rf_set_default_para(DEFAULT_WG_SET_FREQ,DEFAULT_WG_SET_SF);
      IIC2_Init();
    Accelerometer_Init();
      //LIS3DH_Data_Init();
      PCA9555_init();
      Lora_1268_Init();
    SwitchLoraSettings(478,7,22);
      Program_Init();

//    adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
         Program_Init();
//#ifdef DEBUG_BOXING
//      io_pin_mux_set(IO_PIN_5,IO_FUNC0);
//      gpio_pin_set_dir(IO_PIN_5,GPIO_DIR_OUT,0);
//      io_pull_set(IO_PIN_5,IO_PULL_DOWN,IO_PULL_UP_LEVEL4);
//#endif			 

      // rf_single_tx_data(TXBuffer,10,2);
//    uart_receive(UART_ID0,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart0_receive_callback);
//    
//// Initialize low power mode
//    power_init();
//      AIR780E_Reset(); //4G模块重启，耗时1.5秒,这个是无法同步的关键
    sleep_timer_open(true, SLEEP_TIMER_MODE_RELOAD, sleep_timer_callback);
      sleep_timer_start(__MS_TO_32K_CNT(1000));//测试
//      sleep_time_count=xtal_38m4_off_time();    


		

    

    Uwbinit();
    while (1)
    { 
//      RED_LED_OFF;
//      BT_LED_OFF;
//      //   gpio_pin_clr(IO_PIN_5);
			
       Lora_Tx_Poll();
      IdleTask();
       // UwbRange();
   
//        if(flag_TCP_reconnectting||IfTCPConnected())
//        {
//            
//        //    LOG_INFO(TRACE_MODULE_APP, "处理4G任务\r\n");
//            air780_led_on();
//            if(flag_4guart_needinit)
//            {
//                flag_4guart_needinit = 0;
//                AIR780EUartInit();
//            }
//            Internet_Poll();
//            HIDO_ATLitePoll();
//            HIDO_TimerPoll();
//            TCPClient_Poll();
//            air780_led_off();
//        }
//        if(flag_secondtask)
//        {
//            flag_secondtask = 0;
//            SecondTask();
//        }

//        //3种情况后都要发包和休眠
//        //if(send_flag){
//        //message_construct();
//        //send_udp;
//        //air780_success_state=0;//关闭4G成功发送灯
//        //blink_led(&air780_success_state);//成功测距闪烁4G状态灯
//        //air780_success_state=0;
//        //}
//#ifndef DEBUG_MODE
////if(flag_sleeptimer)
//        if(!gpio_pin_get_val(INPUT_5V_Pin)&&((IfTCPConnected()&&Socket_IsSendQueueEmpty(0))||!flag_TCP_reconnectting&&!IfTCPConnected())) //进入休眠条件（与关系，全满足才进）：1.没有5V输入 2 TCP已连接时发送队列为空||TCP无连接时不在重连状态。
//        {
//                 if(!flag_4guart_needinit)
//            {
//                           LOG_INFO(TRACE_MODULE_APP, "4G RX 中断打开\r\n");
//                             board_4GUsart_detection_init(_4gUsart_handler);

//            }
//               flag_sleeptimer =0;
//            LOG_INFO(TRACE_MODULE_APP, "进入休眠\r\n");
//                flag_4guart_needinit = 1;

//        trace_flush();
//        uint32_t lock = int_lock();
//        //LOG_INFO(TRACE_MODULE_APP, "进入低功耗");
//        power_enter_power_down_mode(0);
//        int_unlock(lock);
//        }
//#endif
    }
}