这是工卡机测试版本

zhangbo

5 天以前 deaaa18131675b17ef4fa49befa80cfb09778898

 keil/include/drivers/PCA9555.c

@@ -1,4 +1,5 @@
#include "PCA9555.h"
#include "DBG.h"
uint8_t gps_led_output_state,tts_enbale_output_state,wake_up_output_state,air780e_enable_output_state,sos_enable_output_state,gps_backup_output_state,gps_power_output_state,main_ri_output_state;//1组output IO口从左到右1.0~1.7
uint8_t mcu_a_output_state,chg_g_output_state,lora_irq_output_state,lora_nrst_output_state,adc_minius_output_state,input_5v_output_state,pwr_on_output_state,pwr_enable_output_state;//2组output IO口从左到右0.0~0.7
uint8_t pca9555writedata_config[10];//暂存寄存器所有配置的数组
@@ -434,14 +435,115 @@
          //error
    }
}
/*设置第一个芯片某一通道默认输入的极性
  num    控制的IO序号 1~17
  value  控制的IO输出状态 0：非使能 1：使能翻转为电平0
*/
void PCA9555_Set_One_Value_Polarity_input(unsigned char num,unsigned char value) 
{
    if(num >0 && num <17){//第一个芯片IO1-16控制
       if(num <9){
            if(value)pca9555writedata_polarity[0] |= 0x01<<(num - 1);//赋值位高
            else pca9555writedata_polarity[0] &= ~(0x01<<(num - 1));//赋值位低
         }
         else{
            if(value)pca9555writedata_polarity[1] |= 0x01<<(num - 9);//赋值位高
            else pca9555writedata_polarity[1] &= ~(0x01<<(num - 9));//赋值位低
         }
         PCA9555_write_polarity_port_data(PCA9555_DEVICE_ADDR,pca9555writedata_polarity[0],pca9555writedata_polarity[1]);
    }else{//超出芯片控制
          //error
    }
}
/*读取5V引脚的输入高低电平
  返回值 高1 低0 电平
*/
uint16_t gpio_state111;
extern uint8_t input5v_time;
HIDO_UINT8 _5VState = 0;
HIDO_UINT8 Get5VState()
{
    return _5VState;
}

void Set5VState(HIDO_UINT8 state)
{
//    if(_5VState != state)
//    {
//        DBG_SetMode(DBG_MODE_CHARGE);
//    }
    _5VState = state;
}

int read_5v_input_pca(void)
{
    if(input5v_time)
    {
        input5v_time=0;    
        PCA9555_readdata(PCA9555_DEVICE_ADDR,pca9555writedata_input);//读输入寄存器的值
        uint16_t gpio_state;
        gpio_state=(uint16_t)pca9555writedata_input[0]<<8|pca9555writedata_input[1];
        gpio_state111=gpio_state;
        if(gpio_state==0xFFFF)
        {return 0;}
        if(INPUT_5V_POSITION&gpio_state)
        {
            Set5VState(1);
            return 1;
        }
        else
        {
            Set5VState(0);
            return 0;
        }
    }
    else {
        Set5VState(0);
      return 0;
   }
    
}
int read_init_5v_input_pca(void)
{   
      PCA9555_readdata(PCA9555_DEVICE_ADDR,pca9555writedata_input);//读输入寄存器的值
      uint16_t gpio_state;
      gpio_state=(uint16_t)pca9555writedata_input[0]<<8|pca9555writedata_input[1];
      gpio_state111=gpio_state;
      if(gpio_state==0xFFFF)
      {return 0;}
      if(INPUT_5V_POSITION&gpio_state)
      {
            Set5VState(1);
            return 1;
      }
      else
      {
            Set5VState(0);
            return 0;
      } 
}
/*读取供电引脚的输入高低电平
  返回值 高1 低0 电平
*/
int read_powerkey_input_pca(void)
{
    PCA9555_readdata(PCA9555_DEVICE_ADDR,pca9555writedata_input);//读输入寄存器的值
   uint16_t gpio_state;
   gpio_state=(uint16_t)pca9555writedata_input[0]<<8|pca9555writedata_input[1];
   if(PWR_ON_POSITION&gpio_state)
      return 1;
   else {
      return 0;
   }
}
/*读取SOS引脚的输入高低电平
  返回值 高1 低0 电平
*/
int read_userkey_input_pca(void)
{PCA9555_readdata(PCA9555_DEVICE_ADDR,pca9555writedata_input);//读输入寄存器的值
   uint16_t gpio_state;
   gpio_state=(uint16_t)pca9555writedata_input[0]<<8|pca9555writedata_input[1];
   if(INPUT_5V_POSITION&gpio_state)
   if(SOS_ENBALE_POSITION&gpio_state)
      return 1;
   else {
      return 0;
@@ -452,20 +554,41 @@
//IIC_gpio_pca_init();//配置IIC管脚
   
   //PCA9555_write_config_port_data(PCA9555_DEVICE_ADDR,PCA_OUTPUT_CONFIG_MASK,PCA_OUTPUT_CONFIG_MASK);//全配置为输出
	
   PCA9555_write_config_port_data(PCA9555_DEVICE_ADDR,PCA_INPUT_CONFIG_MASK,PCA_INPUT_CONFIG_MASK);//全配置为输入
   //PCA9555_Set_One_Value_Polarity_input(PWR_ON,0);
   //PCA9555_write_config_port_data(PCA9555_DEVICE_ADDR,PCA_INPUT_CONFIG_MASK,PCA_INPUT_CONFIG_MASK);//全配置为输入
   //PCA9555_write_polarity_port_data(PCA9555_DEVICE_ADDR,0x00,0x00);//翻转
   //PCA9555_Set_One_Value_Config(WAKE_UP,1);
   //PCA9555_Set_All_Output(1);
	
   PCA9555_Set_One_Value_Config(GPS_POWER,0);//设置GPS为输出
   PCA9555_Set_One_Value_Output(GPS_POWER,1);//拉高GPS
    
    PCA9555_Set_One_Value_Config(GPS_BACKUP,0);//设置GPS备用电源为输出
   PCA9555_Set_One_Value_Output(GPS_BACKUP,1);//拉高GPS
    
//    while(1)
   PCA9555_Set_One_Value_Config(ADC_MINIUS,0);//设置ADC输出
   PCA9555_Set_One_Value_Output(ADC_MINIUS,1);//默认拉高
   PCA9555_Set_One_Value_Config(MCU_A,0);//设置串口复用芯片切换
   PCA9555_Set_One_Value_Output(MCU_A,1);//输出高电平为uart通讯
   PCA9555_Set_One_Value_Config(INPUT_5V,1);//设置5V输入检测
   PCA9555_Set_One_Value_Config(GPS_LED,0);//设置LED灯输出
   PCA9555_Set_One_Value_Output(GPS_LED,1);//输出高电平开启LED通闪烁
   PCA9555_Set_One_Value_Config(LED_POWER,0);//设置LED灯输出
   PCA9555_Set_One_Value_Output(LED_POWER,1);//输出高电平开启LED通闪烁
   PCA9555_Set_One_Value_Config(PWR_ENABLE,0);//设置电池上电是否给单片机供电
   PCA9555_Set_One_Value_Output(PWR_ENABLE,1);//高电平默认导通单片机供电
   PCA9555_Set_One_Value_Config(PWR_ON,1);//设置开关机按键输入
   PCA9555_Set_One_Value_Config(SOS_ENBALE,1);//设置SOS按钮输入
    
   PCA9555_Set_One_Value_Config(AIR780E_ENBALE,0);//配置4G供电
   PCA9555_Set_One_Value_Output(AIR780E_ENBALE,1);//打开4G
	
//   PCA9555_Set_One_Value_Config(MAIN_RI,0);//配置4G唤醒引脚为输入
//   PCA9555_Set_One_Value_Output(MAIN_RI,1);
//   PCA9555_Set_One_Value_Config(SOS_ENBALE,1);//设置SOS按钮输入
    
    PCA9555_Set_One_Value_Config(WAKE_UP,1);
//    PCA9555_Set_One_Value_Config(TTS_ENABLE,0);//配置tts供电
//   PCA9555_Set_One_Value_Output(PWR_ON,0);//拉低
   //PCA9555_readdata_from_output_register(PCA9555_DEVICE_ADDR,pca9555writedata_input);
   //PCA9555_Set_One_Value_Output(AIR780E_ENBALE,0);
   //PCA9555_Set_One_Value_Output(PWR_ON,0);
@@ -482,3 +605,54 @@

}

extern float nomove_count;
extern uint8_t deep_sleep_falg;

void move_handler()
{
    nomove_count=0;
      if(deep_sleep_falg==0)
      {
     deep_sleep_falg=1;	
//      sleep_timer_start();    
     NVIC_SystemReset();
      }
}
uint8_t test11,test21,test31,test41,test51;
void check_input_change(void)
{
        uint16_t gpio_state;
        gpio_state=(uint16_t)pca9555writedata_input[0]<<8|pca9555writedata_input[1];

           if(WAKE_UP_POSITION&gpio_state)
            {
             //移动
               nomove_count=0;
               if(deep_sleep_falg==0)
               {
                deep_sleep_falg=1;	
//           NVIC_SystemReset();   
                sys_reset(0);
               }
// 
             test51++;
            }
//   if(!(MAIN_RI_POSITION&gpio_state))
//   {
//       flag_4G_recdata = 1;
//     delaysleep_count = 3;
//        test21++;
//   }
         if((PWR_ON_POSITION&gpio_state))
         {
        PowerTask();
        test31++;
         }
         if(!(SOS_ENBALE_POSITION&gpio_state))
         {
        UserKeyTask();
        test21++;
         }


}