这是工卡机测试版本

zhangbo

6 天以前 deaaa18131675b17ef4fa49befa80cfb09778898

 keil/include/main/main.c

@@ -1,43 +1,3 @@
/*
 * Copyright (c) 2019-2023 Beijing Hanwei Innovation Technology Ltd. Co. and
 * its subsidiaries and affiliates (collectly called MKSEMI).
 *
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 *    this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form, except as embedded into an MKSEMI
 *    integrated circuit in a product or a software update for such product,
 *    must reproduce the above copyright notice, this list of conditions and
 *    the following disclaimer in the documentation and/or other materials
 *    provided with the distribution.
 *
 * 3. Neither the name of MKSEMI nor the names of its contributors may be used
 *    to endorse or promote products derived from this software without
 *    specific prior written permission.
 *
 * 4. This software, with or without modification, must only be used with a
 *    MKSEMI integrated circuit.
 *
 * 5. Any software provided in binary form under this license must not be
 *    reverse engineered, decompiled, modified and/or disassembled.
 *
 * THIS SOFTWARE IS PROVIDED BY MKSEMI "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL MKSEMI OR CONTRIBUTORS BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include "mk_trace.h"
#include "mk_wdt.h"
#include "mk_calib.h"
@@ -61,10 +21,15 @@
#include "HIDO_ATLite.h"
#include "HIDO_Timer.h"
#include "TCPClient.h"
#include "PCA9555.h"
#include "WS2812.h"
#include "DBG.h"

//#define DEBUG_MODE
extern int simple_main(void);
extern int temp_main(void);
void boot_deinit(void);
void upload_apppoll();
#define TEST_UART_POLL_MODE 0
#define TEST_UART_INTERUPT_MODE 1
#define TEST_UART_DMA_MODE 2
@@ -77,12 +42,19 @@
#define UPDATE_TIME 10


#define UWB_OPEN_COUNT 1
#define UWB_MEASUREMENT_INTERVAL 5
#define UWB_MEASUREMENT_INTERVAL_SLEEP 30

#define INACTIVE_TIMEOUT 30

uint8_t input5v_flag=0;
extern uint8_t mUsartReceivePack[100];
extern uint8_t mUsart2ReceivePack[150];
extern uint8_t state5V_prase_flag,gps_prase_flag;
extern int distance;
extern uint8_t anchordata_num;
uint32_t dev_id;
uint16_t dev_id;
uint8_t group_id;
uint16_t tag_frequency;
uint16_t disoffset;
@@ -90,23 +62,37 @@
int16_t fVoltage_mv,first_search_flag;
uint8_t bat_percent,g_start_send_flag=1;
uint8_t link_success_flag,motor_count;
uint16_t gps_wait_count;
uint8_t state5v;
uint8_t motor_power_state=1,uwb_state,air780_power_state,gps_success_state,chaging_state,changed_state,air780_success_state,first_motor_in_flag;
uint16_t gps_wait_count,gps_wait_count2;
uint8_t state5v = 1;
uint8_t motor_power_state=1,uwb_state,air780_power_state,gps_success_state,red_charge_state,green_charge_state,air780_success_state,first_motor_in_flag;
float nomove_count=0;
static uint32_t sample[NUM_SAMPLES] = {0};
uint8_t recev_error_num,send_messgae_count,send_flag,control_state;
uint8_t recev_error_num,send_messgae_count,send_flag,control_state,power_low_flag;
uint8_t flag_4g_usart_rx_state = 1;  //4G 串口RX当前是 RX状态，不是GPIO状态
int input_5v_flag,air780e_flag1,air780e_flag2,air780e_flag3,air780e_flag4;
extern uint8_t pca9555writedata_config[10];//暂存寄存器所有配置的数组
extern uint8_t pca9555writedata_output[10];//暂存输出高低电平配置的数组
extern uint8_t pca9555writedata_input[10];//暂存输入寄存器所有配置的数组
extern uint8_t pca9555writedata_polarity[10];//暂存输入极性反转寄存器所有配置的数组
uint8_t temp_pca9555writedata_input[10];//暂存上一次输入寄存器所有配置的数组
typedef enum
{      UN_BIND=0,
        LINK_SUCCESS,
        SEARCH_DEV,
} Operation_step;

Operation_step UWB_work_state;

uint32_t gpsbaudrate;
uint32_t uwb_time_count = 0;  // 定时器计数值
//uint32_t step_count = 0;      // 步数计数
//uint32_t last_step_count = 0; // 上一次步数

CountState_t current_state = STATE_NORMAL; // 当前状态
uint32_t state_start_time = 0; // 状态开始时间

Commend_SendDate send_struct;
static struct ADC_CFG_T usr_adc_cfg = {
struct ADC_CFG_T usr_adc_cfg = {
    .mode = ADC_MODE_CONTINUE,    /* Selected single conversion mode  */
    .clk_sel = ADC_CLK_HIGH,      /* Selected 62.4M high speed clock */
    .vref_sel = ADC_SEL_VREF_INT, /* Using internal reference voltage (1.2V)*/
@@ -127,7 +113,7 @@
    .flow = UART_FLOW_CONTROL_NONE,
    .rx_level = UART_RXFIFO_CHAR_1,
    .tx_level = UART_TXFIFO_EMPTY,
    .baud = BAUD_115200,
    .baud = BAUD_9600,
#if (TEST_UART_MODE == TEST_UART_POLL_MODE)
    .dma_en = false,
    .int_rx = false,
@@ -142,10 +128,74 @@
    .int_tx = false,
#endif
};
static void uart_receive_callback(void *dev, uint32_t err_code)
void uart_receive_callback(void *dev, uint32_t err_code)
{
    uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
}
uint8_t deep_sleep_falg=1;
extern  uint8_t userkey_state;
extern uint8_t heartbeasend_flag;
uint8_t sleepflag;
uint32_t sleepflagtime;
uint8_t onlyoneflag=1;
void mcu_deep_sleep(void)
{
    
                uint32_t lock;
            trace_flush();
            lock = int_lock();
//                  LOG_INFO(TRACE_MODULE_APP, "进入深度休眠\r\n");
//                  gps_air780_power_change(0,0);//关闭gps，4G 
                PCA9555_Set_One_Value_Output(LED_POWER,0);//输出低电平关闭LED
            PCA9555_Set_One_Value_Output(GPS_POWER,0);//关闭gps，4G 
            PCA9555_Set_One_Value_Output(AIR780E_ENBALE,0);//关闭gps，4G 
                     sleep_timer_stop();	
                  //adc_close();
            power_enter_power_down_mode(1);
//                  LOG_INFO(TRACE_MODULE_APP, "从休眠出来\r\n");
            sys_reset(0);
            int_unlock(lock);
////            uint32_t lock;
////            trace_flush();
////            lock = int_lock();
//////                  LOG_INFO(TRACE_MODULE_APP, "进入深度休眠\r\n");
////                  gps_air780_power_change(0,0);//关闭gps，4G 
//             deep_sleep_falg=0;
//            PCA9555_Set_One_Value_Output(LED_POWER,0);//输出低电平关闭LED
//            PCA9555_Set_One_Value_Output(GPS_POWER,0);//关闭gps，4G 
////                  PCA9555_Set_One_Value_Config(MAIN_RI,0);//配置4G唤醒引脚为输入
////				    
//////                  PCA9555_Set_One_Value_Output(MAIN_RI,1);
//             boot_deinit();
//            CloseUWB();
//            if(onlyoneflag)
//            {
//            onlyoneflag=0;
//            userkey_state=4;
//            heartbeasend_flag = 1;
//            sleepflag=1;
//            sleepflagtime=HIDO_TimerGetTick();
//            }
//            if(sleepflag)
//            {
//             if(HIDO_TimerGetTick() - sleepflagtime>3)  
//             {
//              PCA9555_Set_One_Value_Output(AIR780E_ENBALE,0);//关闭gps，4G 
//             }         
//            }
//    
////            PCA9555_Set_One_Value_Output(AIR780E_ENBALE,0);//关闭gps，4G 
//	          
////                  sleep_timer_stop();	
////                  //adc_close();
////            power_enter_power_down_mode(1);
////             delay_us(200000);

////             sys_reset(0);
//////                  LOG_INFO(TRACE_MODULE_APP, "从休眠出来\r\n");
////            int_unlock(lock);			 
}
uint8_t jiancebat_percent_flag;
static void adc_callback(void *data, uint32_t number)
{
    uint32_t *result = (uint32_t *)data;
@@ -159,7 +209,7 @@
        {
            bat_percent = 0;
        }
        else if(fVoltage_mv > 4100)
        else if(fVoltage_mv > 4200)
        {
            bat_percent = 100;
        }
@@ -168,63 +218,135 @@
            bat_percent = ((fVoltage_mv - 3300) /8);
        }
    }
    LOG_INFO(TRACE_MODULE_APP, "The voltage is %%%d \r\n",bat_percent);
      if(bat_percent>100)
         bat_percent=100;
     if(bat_percent<0)
         bat_percent=0;
      jiancebat_percent_flag=1;
//            if(fVoltage_mv<3300)
//            {
//               //power_low_flag=1;
//               //gps_air780_power_change(gps_power_state,0);//gps原样，关闭4G 
////               LOG_INFO(TRACE_MODULE_APP, "电池电压低于3.3V，4G，GPS停止工作\r\n");
//            }else{
//               //power_low_flag=0;
//               //gps_air780_power_change(gps_power_state,1);//gps原样,开启4G
////               LOG_INFO(TRACE_MODULE_APP, "电池电压正常,4G，GPS,正常工作\r\n");
//            }
      PCA9555_Set_One_Value_Output(ADC_MINIUS,1);//拉高
}
//void UartInit(void)
//{
//board_pins_config();
//uart_open(UART_ID1, &test_uart_cfg);
//board_debug_console_open(TRACE_PORT_UART0);
//uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
//}
extern gps_uwb_flag;
uint8_t TCP_reconnect_timer,flag_TCP_reconnectting = 1;
uint8_t gps_enable_flag,motor_open_air_flag,moter_open_uwb_flag;
extern uint8_t gps_uwb_flag,gps_need_data_flag;
uint8_t TCP_reconnect_timer,flag_TCP_reconnectting = 1,flag_alam_state = 0,userkey_state;
uint8_t gps_enable_flag,motor_open_air_flag,moter_open_uwb_flag,flag_fenli_alarm = 0,fenli_alarm_count,delaysleep_count,enbale_blink_flag;
int need_open_gps_count;
void MotorPoll(void)
uint32_t keystarttime,keystarttime2,keystarttime3;
extern uint32_t get_in_num,get_out_num;
uint8_t flag_4G_recdata;
uint8_t ledonflag;
uint32_t ledontime;
extern uint8_t flag_first_TCPconnect;
void IMUTask(void)
{
    if(UWB_work_state==UN_BIND) {
        gps_uwb_flag=0;//关闭GPS
        moter_open_uwb_flag=0;//关闭震动
        need_open_gps_count=0;//清0计数gps
    } else { //绑定状态下
        if(anchordata_num==1) {
            if(distance<g_com_map[ALARM_DISTANCE1]) { //小于预警距离
                need_open_gps_count=0;
                moter_open_uwb_flag=0;//关闭震动
                gps_uwb_flag=0;//关闭GPS
            } else if(g_com_map[ALARM_DISTANCE1]<=distance&&distance<=g_com_map[ALARM_DISTANCE2]) { //大于预警距离小于报警距离
                need_open_gps_count++;
                moter_open_uwb_flag=1;//开启震动
                if(need_open_gps_count>=20) {
                    gps_uwb_flag=1;//开启gps测距流程
                    need_open_gps_count=0;
                }
            } else if(distance>=g_com_map[ALARM_DISTANCE2]) { //大于报警距离
                need_open_gps_count++;
                moter_open_uwb_flag=1;//开启震动
                if(need_open_gps_count>=20) {
                    gps_uwb_flag=1;//开启gps测距流程
                    need_open_gps_count=0;
                }
            }
        } else if(anchordata_num==0) {

            gps_uwb_flag=1;//开启gps测距流程
            moter_open_uwb_flag=1;//开启震动
            need_open_gps_count=0;
   if(nomove_count>g_com_map[NOMOVESLEEP_TIME]&&g_com_map[IMU_ENABLE]==1)
   {//power_wakeup_enable((enum POWER_WAKEUP_SOURCE_T)ACCLERATE_DETECT_Pin, POWER_WAKEUP_LEVEL_HIGH);
        if(onlyoneflag)
        {
        onlyoneflag=0;
        nomove_count=0;
        userkey_state=4;
        heartbeasend_flag = 1;
        sleepflag=1;
        sleepflagtime=HIDO_TimerGetTick();
        }
   }
    if(sleepflag)
    {
     if(HIDO_TimerGetTick() - sleepflagtime>3)  
     {
      power_wakeup_enable((enum POWER_WAKEUP_SOURCE_T)PCA_INPUT_DETECT, POWER_WAKEUP_LEVEL_LOW);
      mcu_deep_sleep();
     }         
    }
}
void SecondTask(void)
void powerON_Task(void)
{
    //UWB更新列表
    TagListUpdate();
    GPS_Poll();
    g_com_map[ALARM_DISTANCE1]=30;//测试
    g_com_map[ALARM_DISTANCE2]=40;
if(deep_sleep_falg==0)
{
PCA9555_Set_One_Value_Output(PWR_ENABLE,1);
}
 
}
uint16_t gaodu;
uint8_t guanjiflag;
uint8_t heartbeasend_flag;
uint32_t guanjiflagtime;
void UserKeyTask(void)
{
if(!read_userkey_input_pca())
     {
         delay_ms(1000);
        if(!read_userkey_input_pca())
        {
            userkey_state = 1;
            keystarttime3 =  HIDO_TimerGetTick();
            flag_first_TCPconnect = 1;
                  //UDPClient_UploadGPS();
        }
//        if(HIDO_TimerGetTick() - keystarttime2>10)
//        {
//						
//            g_com_map[CNT_RESTART] = 1;
//        }
     }else
     {
       keystarttime3 =  HIDO_TimerGetTick(); 
     }
} 
void PowerTask(void)
{
     if(read_powerkey_input_pca())
     {
        delay_ms(1000);
        if(read_powerkey_input_pca())
        {
              rtkled=WHITE;
              uwbled=WHITE;
              led4g=WHITE;
              powerled=WHITE;
              Set4LEDColor(uwbled,rtkled,led4g,powerled);
              delay_ms(500);
//            keystarttime =  HIDO_TimerGetTick();
//            PCA9555_Set_One_Value_Output(LED_POWER,0);//输出低电平关闭LED
//            PCA9555_Set_One_Value_Output(AIR780E_ENBALE,0);
//            PCA9555_Set_One_Value_Output(GPS_POWER,0);//关GPS
//            PCA9555_Set_One_Value_Output(PWR_ENABLE,0);//低电平关闭
              heartbeasend_flag = 1;
              guanjiflag=1;
              userkey_state = 2;
              guanjiflagtime=HIDO_TimerGetTick();
        }
     }else
     {
       keystarttime =  HIDO_TimerGetTick(); 
       keystarttime2 =  HIDO_TimerGetTick(); 
     }
}
void MinuteTask(void)
{		
   PCA9555_Set_One_Value_Output(ADC_MINIUS,0);//拉低
    delay_ms(100);
    adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
}
void SecondTask(void)
{static uint8_t second_count;
    if(second_count++>120)
    {
        second_count = 0;
        MinuteTask();
    }
    //UWB状态检测

if(!power_low_flag)//低供电下不需要检测重连
   {
    if(IfTCPConnected())
    {
        TCP_reconnect_timer =0;
@@ -242,131 +364,434 @@
        }

    }
   }
    HIDO_TimerTick();
//      if(nomove_count<=g_com_map[NOMOVESLEEP_TIME])//防止溢出
    nomove_count++;
    gaodu=GetPressAndHeight()*100;
//      else{
//      nomove_count=g_com_map[NOMOVESLEEP_TIME]+1;
//      }
}
uint8_t flag_sleeptimer,flag_secondtask,secondtask_count;
uint8_t tt=1;
uint8_t flag_sleeptimer,flag_secondtask,secondtask_count,log_4g_enable_flag;
uint8_t uwb_offtime_count=0;
uint8_t input5v_time;
extern uint8_t taglist_num;
uint8_t gps_ntripsend;
static void sleep_timer_callback(void *dev, uint32_t time)
{
    IO_control_init();
    UWBPoll();
 //   MotorPoll();
    if(secondtask_count++%2==0)
    {
// powerON_Task();
if(secondtask_count++%2==0)
    {   
        input5v_time=1;
        flag_secondtask = 1;
      if(g_com_map[UWBFrequency]>1)
        {uwb_time_count++;}
//        #endif
            uwb_offtime_count++;
           if(uwb_offtime_count>60)
            {
             uwb_offtime_count=0;
             current_state = STATE_SLEEP;
            }
        if(!read_5v_input_pca())
        {
        if(bat_percent>15)
        {
            powerled = BLUE;
        }else{
             powerled = RED;
        }
        ledonflag=1;
//        ledontime=HIDO_TimerGetTick();
        Set4LEDColor(uwbled,rtkled,led4g,powerled); 
//        uart_send(UART_ID1, ceshidata, 50,NULL);
        }
        input5v_time=1;
        if(taglist_num==0&&g_com_map[UWBFrequency]==1&&g_com_map[UWBENBLE]==1)
        {
        CloseUWB();
        Uwb_init();
        OpenUWB();
        }
        if(g_com_map[UWBENBLE]==1)
        {
       upload_apppoll();
        }
    }else{
        flag_secondtask = 0;
    }

    flag_sleeptimer = 1;

    //马达震动逻辑
    if(motor_open_air_flag||moter_open_uwb_flag)
    {
       if (motor_count++%2==0)
       {
        motor_power_state = 1;
       }else{
        motor_power_state = 0;
       }
    } else {
        motor_power_state=1;
    }

    //GPS工作逻辑

    
 if(delaysleep_count>0)
     delaysleep_count--;
}
static void voltage_input_handler(enum IO_PIN_T pin)

#ifdef JIBU_XIUMIAN

uint16_t sleep_time=0;
uint32_t state_start_time_jibu=0;
uint8_t exercise_state=0;
uint32_t step_count = 0;      // 步数计数
uint32_t last_step_count = 0; // 上一次步数
void check_step_and_update_state(void)
{
    if ((step_count != last_step_count))
      {
        // 步数有变化，重置状态为正常状态
      last_step_count = step_count;
			
         if(current_state == STATE_SLEEP)
         {
            state_start_time_jibu = uwb_time_count;
            state_start_time=uwb_time_count;
         }
//         if (current_state != STATE_NORMAL) 
//            {
//            // 关闭可能正在运行的UWB
//            if (uwb_is_on) {
//                CloseUWB();
//                UWB_LED_OFF;
//                uwb_is_on = false;
//            }
//            current_state = STATE_NORMAL;
//            state_start_time = uwb_time_count; // 重置测距周期
//        }
         current_state = STATE_NORMAL;
         exercise_state=1;
         last_step_count = step_count;
			
    } 
      else
      {
        // 步数没有变化，检查是否需要切换到休眠状态
        if (current_state == STATE_NORMAL)
               {	
            uint32_t inactive_time = uwb_time_count - state_start_time_jibu;
            if (inactive_time >= INACTIVE_TIMEOUT)
                  { // 30秒后切换到休眠状态
                current_state = STATE_SLEEP;
                       exercise_state=2;
                       state_start_time_jibu=uwb_time_count;
            }
          }
     }
}
#endif
static void pca_handler(enum IO_PIN_T pin)
{
   PCA9555_readdata(PCA9555_DEVICE_ADDR,pca9555writedata_input);//读输入寄存器的值
   check_input_change();
//   uint16_t gpio_state;
//   gpio_state=(uint16_t)pca9555writedata_input[0]<<8|pca9555writedata_input[1];

}
static void move_handler(enum IO_PIN_T pin)

void _4gUsart_handler(enum IO_PIN_T pin)
{
    nomove_count=0;
     //LOG_INFO(TRACE_MODULE_APP, "4G RX 唤醒\r\n");
        flag_4G_recdata = 1;
        delaysleep_count = 3;
}
uint8_t flag_4G_recdata;
static void _4gUsart_handler(enum IO_PIN_T pin)
{
    LOG_INFO(TRACE_MODULE_APP, "4G RX 唤醒\r\n");
    // flag_4G_recdata = 1;
    // AIR780EUartInit();
}
extern uint16_t ip0,ip1,ip2,ip3,port;
extern uint8_t gps_4g_flag;
uint8_t gps_need_data_flag,gps_open_flag;
void Program_Init(void)
{
    uint32_t gpsbaudrate1;
    Usart1ParseDataCallback = UsartParseDataHandler;//需改为默认为gps处理，UsartParseDataHandler为升级处理当调试时候改为
    parameter_init_anchor();//g_com_map表初始化角色默认为基站
    dev_id=g_com_map[DEV_ID];//这里不太对
//    g_com_map[GROUP_ID]=9;
    group_id=g_com_map[GROUP_ID];//组ID
    tag_frequency = 1000/g_com_map[COM_INTERVAL];//测距频率这个存的是测距时间
    memcpy(&disoffset,&g_com_map[DIST_OFFSET],2);
    g_com_map[ALARM_DISTANCE1] = 40;
    g_com_map[ALARM_DISTANCE2] = 40;
    warning_distance=g_com_map[ALARM_DISTANCE1];
    prewarning_distance=g_com_map[ALARM_DISTANCE2];
    send_struct.warnDistence=warning_distance;
    send_struct.alarmDistence=prewarning_distance;//更新报警距离
    memcpy(&send_struct.gunLableId,&g_com_map[BIND_DEV_ID],2);//更新绑定ID
    send_struct.tagId=dev_id;//更新设备ID
    g_com_map[BIND_DEV_ID] = 0x1234;
    g_com_map[MOTOR_ONTIME_INDEX]=10;
   tag_frequency = 1000/g_com_map[COM_INTERVAL];
    gpsbaudrate=(g_com_map[GPSBAUDRATE1_INDEX]<<16)|g_com_map[GPSBAUDRATE2_INDEX];
    if(gpsbaudrate==9600)
    {
        gpsbaudrate = 3;
        gpsbaudrate1=9600;
    }
    else  if(gpsbaudrate==115200)
    {
    gpsbaudrate = 7;
        gpsbaudrate1=115200;
    }
    else  
    {
    gpsbaudrate = 3;
        gpsbaudrate1=9600;
    }     
    if(g_com_map[GPSENBLE]>1)
    {
    g_com_map[GPSENBLE]=1;
    }
    if(g_com_map[UWBENBLE]>1)
    {
    g_com_map[UWBENBLE]=1;
    }
    if(g_com_map[UWBFrequency]>10)
    {
    g_com_map[UWBFrequency]=1;
    }
//    g_com_map[IP_0]=111;
//    g_com_map[IP_1]=198;
//    g_com_map[IP_2]=60;
//    g_com_map[IP_3]=6;
//    g_com_map[PORT]=6666;
    
//    g_com_map[IP_0]=117;
//    g_com_map[IP_1]=72;
//    g_com_map[IP_2]=111;
//    g_com_map[IP_3]=237;
//    g_com_map[PORT]=7000;
//    
//    g_com_map[TCP_IP_0]=111;
//    g_com_map[TCP_IP_1]=198;
//    g_com_map[TCP_IP_2]=60;
//    g_com_map[TCP_IP_3]=6;
//    g_com_map[TCP_PORT]=1234;
    /*
    RTCMMODE_NONE,
    RTCMMODE_TCP,
    RTCMMODE_NTRIP,
    */
//    g_com_map[RTCMMODE_INDEX] = RTCMMODE_NTRIP;
    
    
//    snprintf((char *)&g_com_map[NTRIP_HOST_INDEX], 32, "140.143.212.42");
//    g_com_map[NTRIP_PORT_INDEX] = HIDO_UtilStrToInt("8005");
////    snprintf((char *)&g_com_map[NTRIP_PORT_INDEX], 32, "8005");
//    snprintf((char *)&g_com_map[NTRIP_USERNANME_INDEX], 32, "test005");
//    snprintf((char *)&g_com_map[NTRIP_PASSWORD_INDEX], 32, "Hxzk0228");
//    snprintf((char *)&g_com_map[NTRIP_SOURCENAME_INDEX], 32, "RTCM32_GNSS2");


    if(g_com_map[BIND_DEV_ID]==0)
    {
        UWB_work_state = UN_BIND;
    }else{
        UWB_work_state = SEARCH_DEV;
    }
      //g_com_map[SEND_4G_SECOND]
//    if(g_com_map[SEND_4G_SECOND]<30)
//      {
//      gps_open_flag=0;
//      }else{
//      gps_open_flag=1;
//      }
    g_com_map[MODBUS_MODE] = 0;
      log_4g_enable_flag=g_com_map[LOG_4G_ENABLE];
    g_com_map[VERSION] = (1<<8)|23;
          
        
    LOG_INFO(TRACE_MODULE_APP,"设备ID: %x .\r\n",dev_id);
    LOG_INFO(TRACE_MODULE_APP,"固件版本:4G-GPS定位工卡 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
    LOG_INFO(TRACE_MODULE_APP,"服务器地址: %d.%d.%d.%d:%d.\r\n",g_com_map[IP_0],g_com_map[IP_1],g_com_map[IP_2],g_com_map[IP_3],g_com_map[PORT]);
    LOG_INFO(TRACE_MODULE_APP,"设备UWB状态: %x .\r\n",g_com_map[UWBENBLE]);
    LOG_INFO(TRACE_MODULE_APP,"设备GPS状态: %x .\r\n",g_com_map[GPSENBLE]);
    LOG_INFO(TRACE_MODULE_APP,"设备UWB工作间隔: %x .\r\n",g_com_map[UWBFrequency]);
    LOG_INFO(TRACE_MODULE_APP,"设备GPS工作间隔: %x .\r\n",g_com_map[GPSFrequency]);
    LOG_INFO(TRACE_MODULE_APP,"当前GPS工作波特率: %d .\r\n",gpsbaudrate1);
    if(g_com_map[RTCMMODE_INDEX] == RTCMMODE_TCP)
    {
    LOG_INFO(TRACE_MODULE_APP,"TCP_RTCM模式,服务器地址: %d.%d.%d.%d:%d.\r\n",g_com_map[TCP_IP_0],g_com_map[TCP_IP_1],g_com_map[TCP_IP_2],g_com_map[TCP_IP_3],g_com_map[TCP_PORT]);
    }
    else if(g_com_map[RTCMMODE_INDEX] == RTCMMODE_NTRIP)
    {
        LOG_INFO(TRACE_MODULE_APP,"NtripHost:%s.\r\n",(char *)&g_com_map[NTRIP_HOST_INDEX]);
        LOG_INFO(TRACE_MODULE_APP,"NtripPort:%d.\r\n",g_com_map[NTRIP_PORT_INDEX]);
        LOG_INFO(TRACE_MODULE_APP,"NtripUsername:%s.\r\n",(char *)&g_com_map[NTRIP_USERNANME_INDEX]);
        LOG_INFO(TRACE_MODULE_APP,"NtripPassword:%s.\r\n",(char *)&g_com_map[NTRIP_PASSWORD_INDEX]);
        LOG_INFO(TRACE_MODULE_APP,"NtripSourcename:%s.\r\n",(char *)&g_com_map[NTRIP_SOURCENAME_INDEX]);
    }
    else if(g_com_map[RTCMMODE_INDEX] == RTCMMODE_NONE)
    { 
        LOG_INFO(TRACE_MODULE_APP,"单点定位模式模式. \r\n");
    }
    delay_ms(500);
}



uint32_t adctick = 0;
uint8_t only_one_flag;
uint16_t chongman_time;
uint8_t bat_percent_old=100;
uint8_t input5vflag;
extern uint8_t ota_flag;
uint8_t bat_percent_only_one=1;
extern uint8_t jiancebat_percent_flag;
void IdleTask(void)
{
    if(gpio_pin_get_val(INPUT_5V_Pin))
if(read_5v_input_pca())
      {
      if(input5v_flag==0)
    {

        if(state5v==0)
        {
            state5v=1;
            state5V_prase_flag=state5v;
            gps_prase_flag=0;//解除gps解析
            uart1_change_from_gps_to_debug();
            uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);//开启dma
            //UartInit();
        }

        //UART_CheckSend();
    } else {
        if(state5v==1)
        {
            state5v=0;
            state5V_prase_flag=state5v;
            gps_prase_flag=1;//恢复gps解析
            uart1_change_from_debug_to_gps();
            uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);//开启dma
            //UartDeinit();
        }
     NVIC_SystemReset();
    }
            if(state5v==0)
            {
                state5v=1;
                state5V_prase_flag=state5v;
                gps_prase_flag=0;//解除gps解析
                uart1_change_from_gps_to_debug();//测试
                PCA9555_Set_One_Value_Output(MCU_A,1);//输出高电平切换为5V输入
            } 
            chongman_time=0;
            only_one_flag=0;
            uwbled=0;
            rtkled=0;
            led4g=0;
            powerled=0;
//            PCA9555_Set_One_Value_Output(AIR780E_ENBALE,0);
            while(1)
            {
                nomove_count = 0;
                wdt_ping(WDT_ID0);//喂狗
//                adctick = HIDO_TimerGetTick();
                if(HIDO_TimerGetTick()-adctick>600)  //10分钟采样一次 电量
                {
                    chongman_time=chongman_time+60;
                    adctick = HIDO_TimerGetTick();
                    PCA9555_Set_One_Value_Output(ADC_MINIUS,0);//拉低
                    adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
                }
                if(bat_percent>=99&&!only_one_flag)
                {
                only_one_flag=1;
                chongman_time=0;
                }
                if(bat_percent>=99&&chongman_time>=180)
                {
                    powerled = GREEN;
                }else{
                    powerled = RED;
                }
                if(DBG_GetMode() == DBG_MODE_SHELL)
                {
                        if(ota_flag==1)
                        {
//                            OTA_Poll();
//                            HTTPClient_Poll();  
                        }
                        else
                        {
                        uwb_app_poll();
                        }
                        Internet_Poll();
                        HIDO_TimerPoll();
                        HIDO_ATLitePoll();
                        TCPClient_Poll();
                        if(g_com_map[RTCMMODE_INDEX] == RTCMMODE_TCP)
                        {TCPClient_Poll_1();}
                        if(flag_secondtask)
                        {
                            flag_secondtask = 0;
                            SecondTask();
                        }
                        UserKeyTask();
                }
                UART_CheckReceive();
                if(flag_secondtask)
                {
                    flag_secondtask = 0;
                    SecondTask();
                }
                if(DBG_GetMode() == DBG_MODE_SHELL)
                {
                Set4LEDColor(uwbled,rtkled,led4g,powerled);
                    if(g_com_map[CNT_RESTART]==1)
                    {
                        g_com_map[CNT_RESTART]=0;
                        save_com_map_to_flash();
                        NVIC_SystemReset();

                    }
                }
                else
                {
                Set4LEDColor(0,0,0,powerled);
                }
                if(input5v_time)
                {
                if(!read_5v_input_pca())
                {
                break;
                }
                }
            }
//            NVIC_SystemReset();
//                  PCA9555_Set_One_Value_Output(PWR_ENABLE,0);
            input5vflag=1;
      }
        else 
        {
            if(state5v==1)
            {
                g_com_map[MODBUS_MODE] = 0;
                state5v=0;
                state5V_prase_flag=state5v;
                gps_prase_flag=1;//恢复gps解析
                uart1_change_from_debug_to_gps();//测试
//                PCA9555_Set_One_Value_Output(MCU_A,0);//输出低电平切换为GPS
            PCA9555_Set_One_Value_Output(LED_POWER,0);//输出低电平关闭LED
            PCA9555_Set_One_Value_Output(AIR780E_ENBALE,0);
            PCA9555_Set_One_Value_Output(GPS_POWER,0);//关GPS
            PCA9555_Set_One_Value_Output(PWR_ENABLE,0);//低电平关闭
                     delay_us(1000000);
							  
            }
        }
      UART_CheckReceive();
}
int bind_check(void)
{
    if(g_com_map[BIND_DEV_ID]!=0x00)
    {
        return 1;
//绑定信息为1说明设备已经被下发绑定
    } else {
        return 0;
//绑定信息为0说明设备未被绑定
    }
}
void check_if_in_search(void)
{
    if(link_success_flag==1) { //如果第一次测距收包成功那么则进入连接测距模式
        UWB_work_state=LINK_SUCCESS;
    } else { //否则进入搜索模式
        UWB_work_state=SEARCH_DEV;
        if(first_search_flag==0)
            first_search_flag=1;
    }
        if(g_com_map[CNT_RESTART]==1)
        {
            g_com_map[CNT_RESTART]=0;
            NVIC_SystemReset();
         
        }
        if(g_com_map[MAP_SIGN_INDEX]!=0x55AA||g_com_map[COM_INTERVAL]==0)
        {
            NVIC_SystemReset();
        }
        HIDO_TimerPoll();
        if(ledonflag==1)
        {
        ledonflag=0;
        uwbled=0;
        rtkled=0;
        led4g=0;
        powerled=0;
        Set4LEDColor(LEDOFF,LEDOFF,LEDOFF,LEDOFF); 
        }
         if(bat_percent<1&&bat_percent_only_one&&jiancebat_percent_flag)
         {
                userkey_state=3;
                heartbeasend_flag = 1;
                guanjiflag=1;
                guanjiflagtime=HIDO_TimerGetTick();
                bat_percent_only_one=0;
         }
         if(guanjiflag)
         {
              rtkled=WHITE;
              uwbled=WHITE;
              led4g=WHITE;
              powerled=WHITE;
              Set4LEDColor(uwbled,rtkled,led4g,powerled);
             if(HIDO_TimerGetTick() - guanjiflagtime>3)  
             {
                PCA9555_Set_One_Value_Output(LED_POWER,0);//输出低电平关闭LED
                PCA9555_Set_One_Value_Output(AIR780E_ENBALE,0);
                PCA9555_Set_One_Value_Output(GPS_POWER,0);//关GPS
                PCA9555_Set_One_Value_Output(PWR_ENABLE,0);//低电平关闭
             }         
         
         }
}
void boot_deinit(void)
{
@@ -374,24 +799,147 @@
// UART0 TX/RX
    io_pin_mux_set(IO_PIN_5, IO_FUNC0);
    io_pin_mux_set(IO_PIN_6, IO_FUNC0);
     gpio_pin_set_dir(IO_PIN_5 , GPIO_DIR_OUT, 0);
     gpio_pin_set_dir(IO_PIN_6 , GPIO_DIR_OUT, 0);
    // UART1 RX/TX
    io_pin_mux_set(IO_PIN_10, IO_FUNC0);
    io_pin_mux_set(IO_PIN_9, IO_FUNC0);
	
    uart_close(UART_ID1);//解绑原来串口1
    uart_close(UART_ID0);//解绑原来串口0
}

extern uint32_t uwb_time_count;
uint8_t GPS_UPLOAD_FLAG=0;
uint32_t elapsed_time_jibu;
void upload_apppoll()
{	

    if(current_state==STATE_NORMAL)
    {
        if(g_com_map[UWBFrequency]>1)
        {
            elapsed_time_jibu = uwb_time_count - state_start_time;
            if(elapsed_time_jibu==1)
            {
                 CloseUWB();
                 UWBSendUDPTask();
            }
            else if(elapsed_time_jibu==g_com_map[UWBFrequency])
            {
                   taglist_num = 0;
                   CloseUWB();
                   Uwb_init();
                   OpenUWB();						
                   state_start_time = uwb_time_count;	
            }	
        }
        else
        {}
    }
    else if(current_state==STATE_SLEEP)
    {
            elapsed_time_jibu = uwb_time_count - state_start_time;
            switch(elapsed_time_jibu)
            {
            case UWB_OPEN_COUNT:
                CloseUWB();
                UWBSendUDPTask();						
                break;
                
            case UWB_MEASUREMENT_INTERVAL_SLEEP:
                taglist_num = 0;
                CloseUWB();
                Uwb_init();
                OpenUWB();	
                state_start_time = uwb_time_count;							
                break;						
            }
    }
//    switch (current_state) 
//    {
////#ifdef UWB_1_5HZ
//       if(g_com_map[UWBFrequency]>1)
//       {
//        case STATE_NORMAL:
//            elapsed_time_jibu = uwb_time_count - state_start_time;
//            if(elapsed_time_jibu)
//            {
//                 CloseUWB();
//                 UWBSendUDPTask();
//            }
//            else if(elapsed_time_jibu==g_com_map[UWBFrequency])
//            {
//                   taglist_num = 0;
//                   CloseUWB();
//                   Uwb_init();
//                   OpenUWB();						
//                   state_start_time = uwb_time_count;	
//            }				
//       }
//       else
//       {}
////#endif
//        case STATE_SLEEP:
//            elapsed_time_jibu = uwb_time_count - state_start_time;
//            switch(elapsed_time_jibu)
//            {
//            case UWB_OPEN_COUNT:
//                CloseUWB();
//                UWBSendUDPTask();						
//                break;
//                
//            case UWB_MEASUREMENT_INTERVAL_SLEEP:
//                taglist_num = 0;
//                CloseUWB();
//                Uwb_init();
//                OpenUWB();	
//                state_start_time = uwb_time_count;							
//                break;						
//            }
//            break;
//    }	

}

uint8_t flag_4guart_needinit=0;
int main(void)
uint8_t index1,index2,index3;
int16_t Voltage_input;
int tt2;
int test1,test3;
uint32_t test4;
extern uint8_t receive_flag;
static void app_wdt_callback(void *dev, uint32_t status)
{
    ASSERT(status, "WDT TIMEOUT，程序复位");
      //LOG_INFO(TRACE_MODULE_APP, "程序卡死，看门狗复位");
}
 struct WDT_CFG_T app_wdt_cfg = {
        .timeout = 32768 * 30,
        .rst_en = true,
        .int_en = true,
        .callback = app_wdt_callback,
    };
int main(void)
 {
     __enable_irq();
    board_clock_run();
      boot_deinit();
    boot_deinit();
    board_pins_config();
    board_debug_console_open(TRACE_PORT_UART0);
    gpio_open();
     IIC2_Init();
     Accelerometer_Init();
//     delay_ms(100);
    BarInit();
//     delay_ms(100);
//   gaodu=GetPressAndHeight();
    PCA9555_init();	
     board_debug_console_open_baud(TRACE_PORT_UART1,BAUD_921600);
     pca_input_detection_init(pca_handler);//pca检测输入
//   while(1);
    // Reset reason
    reset_cause_get();
    reset_cause_clear();

    // Load calibration parameters from NVM
    uint32_t internal_flash = (REG_READ(0x40000018) >> 17) & 0x1;
    uint32_t external_flash = (REG_READ(0x40010030) >> 28) & 0x3;
    if (internal_flash || external_flash == 1)
@@ -402,101 +950,88 @@
    }
    else
    {
        board_calibration_params_default();
      board_calibration_params_default();
    }

    // Chip calibration
    calib_chip();

    // Disable watchdog timer
    wdt_close(WDT_ID0);
    //  LOG_INFO(TRACE_MODULE_APP, "UWB simple example\r\n");

    // open system timer
    //sys_timer_open();

    // TODO 4G
    Program_Init();
    Uart_Register(UART_ID_4G, UART_ID0);

    Uart_Register(UART_ID_DBG_GPS, UART_ID1);
    DBG_Init();
    
    Internet_Init();
    TCPClient_Init();

    gpio_open();
    //board_led_init();

//      adc_open(&usr_adc_cfg);
    IIC2_Init();
    Accelerometer_Init();
    IO_control_init();
    io_pin_mux_set(SCL_PIN, IO_FUNC0);//测试测距波形
    gpio_pin_set_dir(SCL_PIN , GPIO_DIR_OUT, 0);
    io_pull_set(SCL_PIN , IO_PULL_DOWN, IO_PULL_UP_LEVEL4);
    gps_air780_power_change(1,1);//开启gps，4G 
//加速度计初始化必须在IO_control_init之前因为复用SDA引脚
    adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
    uart_open(UART_ID1, &test_uart_cfg);
    Program_Init();
    uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
// Initialize low power mode
    power_init();
    //  LOG_INFO(TRACE_MODULE_APP, "测试数据");
   

    sleep_timer_open(true, SLEEP_TIMER_MODE_RELOAD, sleep_timer_callback);
    //sleep_timer_start(__MS_TO_32K_CNT(g_com_map[COM_INTERVAL]));//测试
    sleep_timer_start(__MS_TO_32K_CNT(SLEEP_TIMER_NUM));//测试
    board_5V_input_init(voltage_input_handler);
    board_acceleration_detection_init(move_handler);
//       LOG_INFO(TRACE_MODULE_APP, "测试进入app");
    //AIR780E_Reset(); //4G模块重启，耗时1.5秒,这个是无法同步的关键
    while (1)
//    if(g_com_map[RTCMMODE_INDEX] == RTCMMODE_NTRIP)
//    {
//       NTRIPClient_Init();
//       NTRIPApp_Init();
//    }
    if(g_com_map[RTCMMODE_INDEX] == RTCMMODE_TCP)
    {
        if(flag_TCP_reconnectting||IfTCPConnected())
        TCPClient_Init_1();
    }
//    HTTPClient_Init();
    wdt_open(WDT_ID0,&app_wdt_cfg);//30s检测喂狗
    LED_output_init();//配置彩色灯引脚


    WT588E02B_Init();
    adc_open(&usr_adc_cfg);
    uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
    power_init();
    Uwb_init();
    if(g_com_map[UWBFrequency]&&g_com_map[UWBENBLE])
    {
        OpenUWB();
    }
    if(!read_5v_input_pca())
    {
     Set4LEDColor(BLUE,GREEN,WHITE,RED);
     delay_ms(500);
     Set4LEDColor(RED,WHITE,RED,WHITE);
     delay_ms(500);		
     Set4LEDColor(LEDOFF,LEDOFF,LEDOFF,LEDOFF);       
    }
		
    g_com_map[MODBUS_MODE] = 0;
    state5v=0;
    state5V_prase_flag=state5v;
    gps_prase_flag=1;//恢复gps解析
    uart1_change_from_debug_to_gps();//测试
    PCA9555_Set_One_Value_Output(MCU_A,0);//输出低电平切换为GPS
    if(g_com_map[UWBENBLE]==0)
    {
    CloseUWB();
    }
    sleep_timer_open(true, SLEEP_TIMER_MODE_RELOAD, sleep_timer_callback);
    sleep_timer_start(__MS_TO_32K_CNT(SLEEP_TIMER_NUM));//测试
    PCA9555_Set_One_Value_Output(ADC_MINIUS,0);//拉低
    adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样

    gaodu=GetPressAndHeight()*100;
      if(read_init_5v_input_pca())
      {input5v_flag=1;}
    while (1)
    { 

        uwb_app_poll();
        Internet_Poll();
        HIDO_TimerPoll();
        HIDO_ATLitePoll();
        TCPClient_Poll();
        wdt_ping(WDT_ID0);//喂狗
        if(g_com_map[RTCMMODE_INDEX] == RTCMMODE_TCP)
        {
            //   LOG_INFO(TRACE_MODULE_APP, "处理4G任务\r\n");
            if(flag_4guart_needinit)
            {
                flag_4guart_needinit = 0;
                AIR780EUartInit();
            }
            Internet_Poll();
            HIDO_ATLitePoll();
            HIDO_TimerPoll();
            TCPClient_Poll();
            TCPClient_Poll_1();
        }
        if(flag_secondtask)
        {
            flag_secondtask = 0;
            SecondTask();
        }
          IMUTask();
        IdleTask();
        //3种情况后都要发包和休眠
        //if(send_flag){
        //message_construct();
        //send_udp;
        //air780_success_state=0;//关闭4G成功发送灯
        //blink_led(&air780_success_state);//成功测距闪烁4G状态灯
        //air780_success_state=0;
        //}
#ifndef DEBUG_MODE
//if(flag_sleeptimer)
    //    if(!gpio_pin_get_val(INPUT_5V_Pin)&&((IfTCPConnected()&&Socket_IsSendQueueEmpty(0))||!flag_TCP_reconnectting&&!IfTCPConnected())&&!flag_4G_recdata) //进入休眠条件（与关系，全满足才进）：1.没有5V输入 2 TCP已连接时发送队列为空||TCP无连接时不在重连状态。
        {
            //     if(!flag_4guart_needinit)
            {
                //           LOG_INFO(TRACE_MODULE_APP, "4G RX 中断打开\r\n");
                //             board_4GUsart_detection_init(_4gUsart_handler);
//
            }
//               flag_sleeptimer =0;
//            LOG_INFO(TRACE_MODULE_APP, "进入休眠\r\n");
            //    flag_4guart_needinit = 1;
//
//        trace_flush();
//        uint32_t lock = int_lock();
//        //LOG_INFO(TRACE_MODULE_APP, "进入低功耗");
//        power_enter_power_down_mode(0);
//        int_unlock(lock);
        }
#endif
            check_step_and_update_state();
    }
}