zhyinch
2020-12-14 19dc67221ff98d8529fdff19be32391f537d21a1
Ô´Âë/ºËÐİå/Src/main.c
@@ -10,14 +10,19 @@
#include "serial_at_cmd_app.h"
#include "global_param.h"
#include "ADC.h"
#include "modbus.h"
#include "deca_device_api.h"
#include "Flash.h"
//#define DEBUG_MODE
void Device_Init(void)
{
   RCC_Configuration();
   //SystemInit();
   NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x5000);
   Nvic_Init();
   Systick_Init();
//   Systick_Init();
   TIM3_Int_Init();
   Led_Init();
   Beep_Init();
   DW_GPIO_Init();
@@ -41,24 +46,75 @@
   checksum = Checksum_u16(&hbsend[2],12);
   memcpy(&hbsend[14],&checksum,2);
}
u16 tyncpoll_time;
TrackingDiffClass *pUWBDistanceTrackingDiff;
u8 group_id,sync_mainbase=0,synclost_timer=0;
uint16_t vel_factor,pos_factor;
extern u8 module_power;
u16 slottime,max_slotnum,current_slotpos,dist_threshold;
void Program_Init(void)
{uint16_t i;
   float temp;
   u16 temp2;
   Usart1ParseDataCallback = UsartParseDataHandler;
   parameter_init();
   //deca_sleep(1000);
   HeartBeatInit();
   dev_id = g_com_map[DEV_ID];
   if(g_com_map[DEV_ROLE])
//   g_com_map[DEV_ROLE]=1;
//      g_com_map[DEV_ID]=1;
//   g_com_map[COM_INTERVAL]=10;
   OUT485_ENABLE;
#ifdef DEBUG_MODE
//   g_com_map[COM_INTERVAL]=50;
//   g_com_map[MAX_REPORT_ANC_NUM]=3;
//   g_com_map[DEV_ID]=1;
//   g_com_map[ANC_POLL]=0;
//   g_com_map[ALARM_DISTANCE1]=100;
   g_com_map[FILTER_COEFFICIENT]=12;
#endif
      //pUWBDistanceTrackingDiff = NewTrackingDiffClass(2, 4, 0.03);
      dev_id = g_com_map[DEV_ID];
      group_id=g_com_map[GROUP_ID];
      vel_factor=g_com_map[FILTER_COEFFICIENT];
      pos_factor=g_com_map[FILTER_COEFFICIENT];
      dist_threshold = (g_com_map[SPEEDFILTER_THRES]*10)/(1000/g_com_map[COM_INTERVAL]);
      if(dist_threshold<300)
      {dist_threshold = 300;}
      if(dist_threshold>15000)
      {dist_threshold = 15000;}
      if(dev_id==0)
         sync_mainbase=1;
      module_power = g_com_map[POWER];
      if(module_power>67)
      {
         module_power=67;
      }
      g_com_map[VERSION] = 0x0127;
   temp=(float)g_com_map[MAX_REPORT_ANC_NUM]*4/3;
   temp2=g_com_map[MAX_REPORT_ANC_NUM]*4/3;
   if(temp2<temp)
   {
   printf("标签ID: %d .\r\n",dev_id);
   printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
   printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
   }else{
   anchor_type = dev_id%g_com_map[MAX_REPORT_ANC_NUM];
   printf("基站ID: %x .\r\n",dev_id);
   printf("基站类型: %c .\r\n",anchor_type+0x41);
   printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
      temp2++;
   }
   slottime=temp2;
   max_slotnum=g_com_map[COM_INTERVAL]/temp2;
   current_slotpos=g_com_map[DEV_ID];
   tyncpoll_time=(current_slotpos%max_slotnum)*slottime;
//   if(g_com_map[DEV_ROLE])
//   {
//   printf("标签ID: %d .\r\n",dev_id);
//   printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
//   printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
//   }else{
//   anchor_type = dev_id%g_com_map[MAX_REPORT_ANC_NUM];
//   printf("基站ID: %x .\r\n",dev_id);
//   printf("基站类型: %c .\r\n",anchor_type+0x41);
//   printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
//   }
   OUT485_DISABLE;
//   printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
//   printf("DEVICE ALARM DISTANCE: 1.%d 2.%d 3.%d .\r\n",g_com_map[ALARM_DISTANCE1],g_com_map[ALARM_DISTANCE2],g_com_map[ALARM_DISTANCE3]);
@@ -82,9 +138,11 @@
UART_PushFrame(hbsend,16);
}
u16 heartbeat_timer,poll_timer;
extern u8 g_start_sync_flag;
u16 heartbeat_timer,poll_timer,sync_timer;
void IdleTask(void)
{
   g_start_sync_flag=0;
         UART_CheckReceive();
      UART_CheckSend();
   if(heartbeat_timer>1000)
@@ -93,26 +151,43 @@
      if(g_com_map[HEARTBEAT]&&g_com_map[DEV_ROLE]==0)
      HeatBeat();
   }
   if(poll_timer>=g_com_map[COM_INTERVAL]-tag_delaytime)
   if(g_com_map[CNT_UPDATE]==1)
   {
      poll_timer=0;
      if(g_com_map[ANC_POLL]||g_com_map[DEV_ROLE])
      {
         if(g_com_map[DEV_ROLE]==0)
         {int8_t correction_time;
            correction_time=tag_timer-(GROUP_TAG_NUM+1)*3;
            tag_delaytime=correction_time;
                     if(tag_delaytime>g_com_map[COM_INTERVAL]/2)
                     {
                     tag_delaytime=tag_delaytime-g_com_map[COM_INTERVAL];
                     }
         }
      g_start_send_flag=1;
      }
      uint32_t result = 0;
      u16 tmp = 0xAAAA;
      __disable_irq();
      result = FLASH_Prepare(0x8004A38, 2);
      if(result)
         result = FLASH_Write(0x8004A38, (const uint8_t*)&tmp, 2);
      __enable_irq();
         printf("进入升级模式\r\n");
      g_com_map[CNT_UPDATE]=0;
      save_com_map_to_flash();
      delay_ms(100);
         //   STMFLASH_Write_NoCheck(0x8004A38,0xAAAA);
         //   Delay_ms(100);
            SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
   }
//      if(g_com_map[CNT_REBOOT]==1)
//      {
//         g_com_map[CNT_REBOOT]=0;
//         g_com_map[MAP_SIGN_INDEX]=0;
//         save_com_map_to_flash();
//         delay_ms(100);
//         SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
//      }
      if(g_com_map[CNT_RESTART]==1)
      {
         g_com_map[CNT_RESTART]=0;
         save_com_map_to_flash();
         delay_ms(100);
            SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
      }
   }
uint16_t temp;
float dw_vbat;
int main(void)
{
 
@@ -125,18 +200,24 @@
   RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
   usart_send[0]=0x55;
   usart_send[1]=0xAA;
   Modbus_RegMap();
   while(1)
   {
      IdleTask();
   if(g_start_send_flag)
   {
      g_start_send_flag = 0;
      g_start_send_flag = 0;
      temp=dwt_readtempvbat(1);
      dw_vbat=(float)((temp&0xff)-173)/173+3.3;
      if(dw_vbat>2.8)
      Tag_App();
   }
   }//else{
   IdleTask();
//   }
//
if(g_com_map[DEV_ROLE]==0)
      Anchor_App();
   }
}