V1.10 增加标签和基站不同固件模式

zhyinch

2020-04-15 53267df53898af998cbd17676c05588a9a19c9c8

 Ô´Âë/ºËÐÄ°å/Src/main.c

@@ -11,6 +11,7 @@
#include "global_param.h"
#include "ADC.h"

//#define DEBUG_MODE

void Device_Init(void)
{
@@ -18,7 +19,8 @@
   //SystemInit();
   NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x5000);
   Nvic_Init();
   Systick_Init();
//   Systick_Init();
   TIM3_Int_Init();
   Led_Init();
   Beep_Init();
   DW_GPIO_Init();
@@ -42,24 +44,55 @@
   checksum = Checksum_u16(&hbsend[2],12);
   memcpy(&hbsend[14],&checksum,2);
}
u16 tyncpoll_time;
u16 slottime,max_slotpos;
void Program_Init(void)
{uint16_t i;
{   float temp;
   u16 temp2;
   uint16_t i;
   Usart1ParseDataCallback = UsartParseDataHandler;
   parameter_init();
   //deca_sleep(1000);
   HeartBeatInit();
#ifdef DEBUG_MODE
//   g_com_map[DEV_ROLE]=1;
//      g_com_map[DEV_ID]=1;
//   g_com_map[COM_INTERVAL]=100;
//   g_com_map[MAX_REPORT_ANC_NUM]=3;
//      g_com_map[NEARBASE_NUM]=1;  
//      g_com_map[NEARBASE_ID1]=2;
   g_com_map[ANC_FLAG]=1;
      save_com_map_to_flash();
#endif
   OUT485_ENABLE;
   g_com_map[VERSION] = 0x0109;	
   dev_id = g_com_map[DEV_ID];
   slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]/3)+1;
   max_slotpos=g_com_map[COM_INTERVAL]/slottime;
   tyncpoll_time=(g_com_map[DEV_ID]%max_slotpos)*slottime;	
	
   #ifdef WORK_MODE_TAG
         g_com_map[DEV_ROLE] =0x1;  //标签
      #else
         g_com_map[DEV_ROLE] =0x0;  //基站
      #endif
		
   if(g_com_map[ANC_FLAG]==0xffff)
   {g_com_map[DEV_ROLE]=1;}
	
   if(g_com_map[DEV_ROLE])
   {
   printf("标签ID: %d .\r\n",dev_id);
   printf("通讯间隔: %d ms.\r\n",g_com_map[COM_INTERVAL]);
   printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
   }else{
	
   anchor_type = dev_id%g_com_map[MAX_REPORT_ANC_NUM];
   printf("基站ID: %x .\r\n",dev_id);
   printf("基站类型: %c .\r\n",anchor_type+0x41);
   printf("单次通讯基站数量: %d个.\r\n",g_com_map[MAX_REPORT_ANC_NUM]);
   }
   OUT485_DISABLE;
//   printf("DEVICE PAIRID: %d .\r\n",g_com_map[PAIR_ID]);
//   printf("DEVICE ALARM DISTANCE: 1.%d 2.%d 3.%d .\r\n",g_com_map[ALARM_DISTANCE1],g_com_map[ALARM_DISTANCE2],g_com_map[ALARM_DISTANCE3]);

@@ -96,24 +129,7 @@
      if(g_com_map[HEARTBEAT]&&g_com_map[DEV_ROLE]==0)
      HeatBeat();
   }
   if(poll_timer>=g_com_map[COM_INTERVAL]-tag_delaytime)
   {
      poll_timer=0;
      if(g_com_map[ANC_POLL]||g_com_map[DEV_ROLE])
      {
         if(g_com_map[DEV_ROLE]==0)
         {int8_t correction_time;
            correction_time=tag_timer-g_com_map[DEV_ID]*3;
            tag_delaytime=correction_time;
                     if(tag_delaytime>g_com_map[COM_INTERVAL]/2)
                     {
                     tag_delaytime=tag_delaytime-g_com_map[COM_INTERVAL];
                     }
         }
      g_start_send_flag=1;
      }
		
   }

   if(g_com_map[CNT_UPDATE]==1)
   {
   uint32_t result = 0;
@@ -124,6 +140,9 @@
      result = FLASH_Write(0x8004A38, (const uint8_t*)&tmp, 2); 
   __enable_irq();
      printf("进入升级模式\r\n");
   g_com_map[CNT_UPDATE]=0;
   save_com_map_to_flash();
   delay_ms(100);
      //   STMFLASH_Write_NoCheck(0x8004A38,0xAAAA);
      //   Delay_ms(100);
         SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader   
@@ -142,15 +161,16 @@
   RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR, ENABLE);
   usart_send[0]=0x55;
   usart_send[1]=0xAA;
	
   while(1)
   {
      IdleTask();		
	
   if(g_start_send_flag)
   {
      g_start_send_flag = 0;      
      Tag_App();
   }
	
      IdleTask();		
if(g_com_map[DEV_ROLE]==0)
      Anchor_App();
   }