V1.10 去掉基站标识，改输出模式

zhyinch

2020-04-16 7db378e2b93702b98ffe7f7b6ab9a4d20aaabb20

 Ô´Âë/ºËÐÄ°å/Src/application/dw_app.c

@@ -158,7 +158,7 @@
}

u16 tag_time_recv[TAG_NUM_IN_SYS];
u8 usart_send[25];
u8 usart_send[100];
u8 battary,button;
extern uint8_t g_pairstart;
void tag_sleep_configuraion(void)
@@ -238,7 +238,7 @@
   }
}
u8 anclost_times=0;
u8 exsistbase_list[MAX_NEARBASE_NUM];
u8 exsistbase_list[MAX_NEARBASE_NUM],report_num;
void NearPoll(void)
{
   static u8 mainbase_lost_count=0,flag_finalsend;
@@ -247,6 +247,7 @@
   uint32_t final_tx_time;
   u32 start_poll;
   u8 i,j,getsync_flag=0,timeout;
//   printf("%d",sync_timer);
      dwt_forcetrxoff();
    dwt_setrxaftertxdelay(POLL_TX_TO_RESP_RX_DLY_UUS);         //设置发送后开启接收，并设定延迟时间
    dwt_setrxtimeout(RESP_RX_TIMEOUT_UUS);      
@@ -257,6 +258,7 @@
   }
   //nearbase_num=0;
   recbase_num=0;
	
   tx_near_msg[BATTARY_IDX] = Get_Battary();
   tx_near_msg[BUTTON_IDX] = !READ_KEY0;
   tx_near_msg[SEQUENCE_IDX] = frame_seq_nb++;
@@ -326,8 +328,8 @@
                           memcpy(&sync_timer,&rx_buffer[ANCTIMEMS],2);
                           memcpy(&tmp_time,&rx_buffer[ANCTIMEUS],2);
                           exsistbase_list[0]=1;
//                           memcpy(&tagslotpos,&rx_buffer[TAGSLOTPOS],2);		
									
////                           memcpy(&tagslotpos,&rx_buffer[TAGSLOTPOS],2);		
//									
                           tmp_time=tmp_time+450;
                           if(tmp_time>999)
                           {
@@ -362,6 +364,7 @@
                           dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
                           if(temp_dist!=0x1ffff)
                           {
                           #ifndef USART_INTEGRATE_OUTPUT
                              usart_send[2] = 1;//正常模式
                              usart_send[3] = 17;//数据段长度
                              usart_send[4] = frame_seq_nb;//数据段长度
@@ -373,6 +376,7 @@
                              checksum = Checksum_u16(&usart_send[2],17);
                              memcpy(&usart_send[19],&checksum,2);
                              UART_PushFrame(usart_send,21);
                           #endif
                           }
                           //result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送         
                        }else{
@@ -394,6 +398,7 @@
                           LED0_BLINK;
                           if(temp_dist!=0x1ffff)
                           {
                              #ifndef USART_INTEGRATE_OUTPUT
                              usart_send[2] = 1;//正常模式
                              usart_send[3] = 17;//数据段长度
                              usart_send[4] = frame_seq_nb;//数据段长度
@@ -405,6 +410,7 @@
                              checksum = Checksum_u16(&usart_send[2],17);
                              memcpy(&usart_send[19],&checksum,2);
                              UART_PushFrame(usart_send,21);
                              #endif

                           //dwt_setdelayedtrxtime(final_tx_time);//设置final包发送时间T5
                        //   result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送         
@@ -454,11 +460,25 @@
               }         
            }
         }
         report_num=0;
   for (i=0;i<nearbase_num;i++)
         {
            nearbaseid_list[i]=true_nearbase_idlist[i];
         nearbase_distlist[i]=true_nearbase_distlist[i];
            nearbase_distlist[i]=true_nearbase_distlist[i];
            if(nearbase_distlist[i]!=0x1ffff)
            {
               memcpy(&usart_send[4+6*report_num],&nearbaseid_list[i],2);
               memcpy(&usart_send[6+6*report_num],&nearbase_distlist[i],4);
               report_num++;
            }
         }
         #ifdef USART_INTEGRATE_OUTPUT		
            usart_send[2] = 4;//正常模式
            usart_send[3] = report_num*6+2;//正常模式
            checksum = Checksum_u16(&usart_send[2],report_num*6+2);
            memcpy(&usart_send[4+report_num*6],&checksum,2);
            UART_PushFrame(usart_send,6+report_num*6);
         #endif
//         if(mainbase_lost_count>5)
//         {
//            //tag_state=DISCPOLL;
@@ -522,7 +542,6 @@
void Tag_App(void)//发送模式(TAG标签)
{
   //LED0_ON;
   dwt_forcetrxoff();
   g_Resttimer=0;
   NearPoll();
}
@@ -557,7 +576,7 @@
}
uint32_t frame_len;
uint32_t resp_tx_time;
uint8_t rec_nearbase_num;
uint8_t rec_nearbase_num,anc_report_num;
void Anchor_RecPoll(void)
{
         tmp_time=TIM3->CNT;
@@ -716,7 +735,8 @@
               {
                  misdist_num=0;
               tagdist_list[taglist_pos] = hex_dist;   
               his_dist[taglist_pos]=hex_dist;						
               his_dist[taglist_pos]=hex_dist;	
            #ifndef USART_INTEGRATE_OUTPUT
               usart_send[2] = 1;//正常模式
               usart_send[3] = 17;//数据段长度
               usart_send[4] = frame_seq_nb;//数据段长度
@@ -728,6 +748,11 @@
               checksum = Checksum_u16(&usart_send[2],17);
               memcpy(&usart_send[19],&checksum,2);
               UART_PushFrame(usart_send,21);
            #else		
               memcpy(&usart_send[4+6*anc_report_num],&tag_id_recv,2);
               memcpy(&usart_send[6+6*anc_report_num],&tagdist_list[taglist_pos],4);
               anc_report_num++;
            #endif
               }else{
                  misdist_num++;
               }