菲曼模组测试完成

zhyinch

2021-11-08 d4e52e570a19bee6932b8ad34c5bd5966b1d3d3a

 Ô´Âë/ºËÐÄ°å/Src/OnChipDevices/Usart.c

@@ -3,7 +3,7 @@
#include <stdio.h>
#include "modbus.h"
#include "Rcc_Nvic_Systick.h"

#include "global_param.h"
//数据发送队列变量
EUART_Frame m_EUART_TxFrames[EUART_TX_FRM_SIZE];   //数据发送帧队列   
volatile int8_t m_EUART_TxFrm_Tail = 0;               //数据发送帧队列尾指针
@@ -124,16 +124,17 @@
   UART_DMAConfiguration();
   
}
u8 overrun_flag=0;
u8 overrun_flag=0,receiveingdata_flag,gpsdataready_flag;
u8 RTCMdata[2000];
u32 lastusartdata_timer;
u16 rtcm_i,gps_packlen;
u16 t1,t2,t3,t4;
extern volatile uint32_t time32_incr;
void UART_CheckReceive(void)
{
   int32_t DMACnt = 0;
   int32_t MaxDataLen = EUART_RX_BUF_SIZE;   
   u8 rxbuf_len = 0;
   u8 buftemp1 = 0;
   u8 buftemp2 = 0;
   u8 i = 0;
	
   //如果正在往发送队列中添加数据，退出
   if(m_bEUARTPushingFrms)
      return;
@@ -146,127 +147,36 @@
      m_bEUARTCheckingRec = 0;
      return;
   }
	
   DMACnt = EUART_RX_BUF_SIZE - (EUART_RX_DMA_CH->CNDTR);//DMACnt是DMA通道接收到数据总长度,CNDTR是dma剩余未使用数量
	
   if(DMACnt!=m_EUART_DMA_RXPtr)
   if(time32_incr-lastusartdata_timer>300&&receiveingdata_flag)
   {
      //DMA有未处理数据
      DMA_rxtemp=m_EUART_DMA_RXPtr+1;
      delay_us(10);
      overrun_flag=0;
      if( DMA_rxtemp >= EUART_RX_BUF_SIZE )
      gpsdataready_flag = 1;
      receiveingdata_flag = 0;
      gps_packlen = rtcm_i;
      rtcm_i = 0;
      t1++;
      if(g_com_map[DEV_ROLE])
      {
         DMA_rxtemp = 0;
         UWBSendOnePackData(RTCMdata,gps_packlen);
         gpsdataready_flag = 0;
      }
      DMACnt = EUART_RX_BUF_SIZE - (EUART_RX_DMA_CH->CNDTR);//DMACnt是DMA通道接收到数据总长度,CNDTR是dma剩余未使用数量
      if(DMACnt!=DMA_rxtemp&&(cmd_mode==0))
   }
   DMACnt = EUART_RX_BUF_SIZE - (EUART_RX_DMA_CH->CNDTR);
   while( m_EUART_DMA_RXPtr != DMACnt && MaxDataLen > 0)
   {
      receiveingdata_flag = 1;
      lastusartdata_timer = time32_incr;
      //Usart1ParseDataCallback(m_EUART_DMA_RXBuf[m_EUART_DMA_RXPtr]);
      RTCMdata[rtcm_i++] = m_EUART_DMA_RXBuf[m_EUART_DMA_RXPtr];
      //delay_us(10);
      m_EUART_DMA_RXPtr++;
      if( m_EUART_DMA_RXPtr >= EUART_RX_BUF_SIZE )
      {
         //DMA有超过2位数据未处理
         DMA_rxtemp = 0;//清空数组指针
         datadelaycount = 0;//等待次数清零
         buftemp1 = m_EUART_DMA_RXBuf[m_EUART_DMA_RXPtr];
         buftemp2 = m_EUART_DMA_RXBuf[m_EUART_DMA_RXPtr+1];
         if((buftemp1==0x55)&&(buftemp2==0xAA))
         {
            //私有协议
            cmd_mode = 1;
         }
         else if(buftemp1==RS485_Addr)
         {
            if((buftemp2==03)||(buftemp2==06)||(buftemp2==16))//功能码正确
            {
               //modubs协议
               t1++;
               cmd_mode=2;
               DMA_rxtemp2=m_EUART_DMA_RXPtr+7;
               if( DMA_rxtemp2 >= EUART_RX_BUF_SIZE-1 )
                  {
                     DMA_rxtemp2 -= EUART_RX_BUF_SIZE;
                     overrun_flag=1;
                  }
            }
            else
            {
               m_EUART_DMA_RXPtr+=2;
               if( m_EUART_DMA_RXPtr >= EUART_RX_BUF_SIZE )
               {
                  m_EUART_DMA_RXPtr = 0;
               }					
            }
         }
         else
         {
            //无效码，干扰码
            if(cmd_mode==0)
            {
                  m_EUART_DMA_RXPtr+=2;
                  if( m_EUART_DMA_RXPtr >= EUART_RX_BUF_SIZE )
                  {
                     m_EUART_DMA_RXPtr = 0;
                  }
             }
          }			
         m_EUART_DMA_RXPtr = 0;
      }
      else
      {
         //只有1位数据未处理
            if(++datadelaycount > WAITDELAYCOUNT)
            {   //超出等待次数
               datadelaycount = 0;
               cmd_mode=0;
               m_EUART_DMA_RXPtr++;
               if( m_EUART_DMA_RXPtr >= EUART_RX_BUF_SIZE )
               {
                  m_EUART_DMA_RXPtr = 0;
               }					
            }
      }
      if(cmd_mode==1)
      {
         //私有协议
         while( m_EUART_DMA_RXPtr != DMACnt && MaxDataLen > 0)
         {	
            Usart1ParseDataCallback(m_EUART_DMA_RXBuf[m_EUART_DMA_RXPtr]);
            m_EUART_DMA_RXPtr++;
            if( m_EUART_DMA_RXPtr >= EUART_RX_BUF_SIZE )
            {
               m_EUART_DMA_RXPtr = 0;
            }
            DMACnt = EUART_RX_BUF_SIZE - (EUART_RX_DMA_CH->CNDTR);
            MaxDataLen--;	
         }
      }		
      else if(cmd_mode==2)
      {
         //modbus协议
         delay_ms(10);//等待数据接收完成
         DMACnt = EUART_RX_BUF_SIZE - (EUART_RX_DMA_CH->CNDTR);	
      if((overrun_flag==0&&DMACnt>DMA_rxtemp2)||(overrun_flag==1&&DMACnt<DMA_rxtemp&&DMACnt>DMA_rxtemp2))			
      {   while(m_EUART_DMA_RXPtr != DMACnt && MaxDataLen > 0)
         {
            RS485_RX_BUFF[i] = m_EUART_DMA_RXBuf[m_EUART_DMA_RXPtr];
            m_EUART_DMA_RXPtr++;
            if(++i >= EUART_RX_BUF_SIZE)i = 0;
            if( m_EUART_DMA_RXPtr >= EUART_RX_BUF_SIZE )
            {
               m_EUART_DMA_RXPtr = 0;
            }
            DMACnt = EUART_RX_BUF_SIZE - (EUART_RX_DMA_CH->CNDTR);
            MaxDataLen--;	
         }
//         m_EUART_DMA_RXPtr++;//数据指向下一位
//         if( m_EUART_DMA_RXPtr >= EUART_RX_BUF_SIZE )
//         {
//            m_EUART_DMA_RXPtr = 0;
//         }
         t2++;
            RS485_Service();	
      }			
         }				
      }

   m_bEUARTCheckingRec = 0;
      DMACnt = EUART_RX_BUF_SIZE - (EUART_RX_DMA_CH->CNDTR);
      MaxDataLen--;
   }
   m_bEUARTCheckingRec = 0;	
}

#ifndef EXUART_USE_TXDMA