V1.3

zhyinch

2022-09-16 ec0d19df2a093c876bda6876f364756443e7bfa5

 Ô´Âë/ºËÐÄ°å/Src/application/dw_app.c

@@ -317,7 +317,26 @@
u8 anclost_times=0;
u8 exsistbase_list[MAX_NEARBASE_NUM],report_num,get_newbase=0;
u16 temp_sync_timer1,temp_sync_timer2;
 double firstpath_power,firstpath_power2, rx_power,rec_firstpath_power;
  double f1, f2, r1, r2;
uint16_t F1,F2,F3,N,C;
double B = 131072;
double A = 121.74;
double min_power;
 dwt_rxdiag_t d1;
double LOS(dwt_rxdiag_t *dia) {
     F1 = dia->firstPathAmp1;
     F2 = dia->firstPathAmp2;
     F3 = dia->firstPathAmp3;
     N = dia->rxPreamCount;
     C = dia->maxGrowthCIR;
    
    firstpath_power=10* log10((F1*F1+F2*F2+F3*F3)/(N*N))-A;
    rx_power=10*log10(C*B/(N*N))-A;

 //   min_power =  - 10 * log10((F1 *F1 + F2 * F2 + F3 * F3) / (C *B));
    return min_power;
  }
 void NearPoll(void)
{
   static u8 mainbase_lost_count=0,flag_finalsend,flag_rxon;
@@ -344,6 +363,7 @@
   tx_nearpoll_msg[BUTTON_IDX] = !READ_KEY0;
   tx_nearpoll_msg[SEQUENCE_IDX] = frame_seq_nb++;
   tx_nearpoll_msg[NEARBASENUM_INDEX] = nearbase_num;
    
   memcpy(&tx_nearpoll_msg[NEARBASEID_INDEX],&nearbaseid_list,nearbase_num*2);
    for(i=0;i<nearbase_num;i++)
    { memcpy(&tx_nearpoll_msg[NEARBASEID_INDEX+nearbase_num*2+i*2],&nearbase_distlist[i],2);}
@@ -437,6 +457,7 @@
                           }
                           TIM3->CNT=tmp_time;
                        }
                                    if(g_com_map[DEV_ROLE])
                           current_slotnum=temp_sync_timer1/g_com_map[COM_INTERVAL];
//                           if(tagslotpos>max_slotpos)
//                              tagslotpos=tagslotpos%(max_slotpos+1);
@@ -464,7 +485,10 @@
                           dwt_writetxdata(28+nearbase_num*4, tx_nearfinal_msg, 0);//将发送数据写入DW1000
                           dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
                           memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
                        if(temp_dist!=0x1ffff&&g_com_map[ALARM_DISTANCE1] == 1)
                                    dwt_readdiagnostics(&d1);
                                    LOS(&d1);
                                    tx_nearfinal_msg[TAGRXPOWER_IDX] = -(int)firstpath_power;
                        if(temp_dist!=0x1ffff)
                           {
                              g_Resttimer=0;
                                        IWDG_Feed();
@@ -472,14 +496,10 @@
                              usart_send[2] = 1;//正常模式
                              usart_send[3] = 17;//数据段长度
                              usart_send[4] = frame_seq_nb;//数据段长度
                              if(g_com_map[DEV_ROLE])
                              {

                              memcpy(&usart_send[5],&dev_id,2);
                              memcpy(&usart_send[7],&rec_nearbaseid,2);      
                              }else{
                              memcpy(&usart_send[5],&rec_nearbaseid,2);
                              memcpy(&usart_send[7],&dev_id,2);	
                              }											
										
                              memcpy(&usart_send[9],&rx_buffer[DIST_IDX],4);
                              usart_send[13] = battary;
                              usart_send[14] = button;
@@ -516,20 +536,16 @@
                           LED0_BLINK;
//                           memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
//                           tagslotpos=GetRandomSlotPos(rec_tagpos_binary);
                           if(temp_dist!=0x1ffff&&g_com_map[ALARM_DISTANCE1] == 1)
                           if(temp_dist!=0x1ffff)
                           {
                              #ifdef USART_SINGLE_OUTPUT
                              usart_send[2] = 1;//正常模式
                              usart_send[3] = 17;//数据段长度
                              usart_send[4] = frame_seq_nb;//数据段长度
                              if(g_com_map[DEV_ROLE])
                              {
                              memcpy(&usart_send[5],&dev_id,2);
                              memcpy(&usart_send[7],&rec_nearbaseid,2);		
                              }else{
			
                              memcpy(&usart_send[5],&rec_nearbaseid,2);
                              memcpy(&usart_send[7],&dev_id,2);   
                              }											
																					
                              memcpy(&usart_send[9],&rx_buffer[DIST_IDX],4);
                              usart_send[13] = battary;
                              usart_send[14] = button;
@@ -842,26 +858,7 @@
            dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR);
         }
}
 double firstpath_power, rx_power,rec_firstpath_power;
  double f1, f2, r1, r2;
uint16_t F1,F2,F3,N,C;
double B = 131072;
double A = 121.74;
double min_power;
 dwt_rxdiag_t d1;
double LOS(dwt_rxdiag_t *dia) {
     F1 = dia->firstPathAmp1;
     F2 = dia->firstPathAmp2;
     F3 = dia->firstPathAmp3;
     N = dia->rxPreamCount;
     C = dia->maxGrowthCIR;
    
    firstpath_power=10* log10((F1*F1+F2*F2+F3*F3)/(N*N))-A;
    rx_power=10*log10(C*B/(N*N))-A;

 //   min_power =  - 10 * log10((F1 *F1 + F2 * F2 + F3 * F3) / (C *B));
    return min_power;
  }
u16 smallcar_idlist[10]={0x4052,0x4032,0x4055,0x4034,0x4016,0x4010,0x4036,0x4027,0x4024,0x4047};
extern u16 dist_threshold;
u8 misdist_num[TAG_NUM_IN_SYS],seize_anchor,getrange_success=0;
@@ -891,8 +888,9 @@
         }else{
            memcpy(&tx_nearresp_msg[DIST_IDX], &tagdist_list[taglist_pos], 4);
         }
			
         if(tagdist_list[taglist_pos]<g_com_map[ALARM_DISTANCE1]||tagdist_list[taglist_pos]==0)
         motorstate =0;
		
            if(tagdist_list[taglist_pos]<g_com_map[ALARM_DISTANCE1]||tagdist_list[taglist_pos]==0)
         {
            motorstate =0;
         }else if(tagdist_list[taglist_pos]<g_com_map[ALARM_DISTANCE2])
@@ -909,22 +907,21 @@
               }else{
               motorstate =0;
            }
         }else{
            motorstate =0;
         }
      tx_nearresp_msg[GROUP_ID_IDX] = group_id;
            tx_nearresp_msg[GROUP_ID_IDX] = group_id;
         tx_nearresp_msg[MAINBASE_INDEX]=flag_syncbase;
         tx_nearresp_msg[MESSAGE_TYPE_IDX]=NEAR_RESPONSE;
         tx_nearresp_msg[MOTORSTATE_INDEX]=(remotesend_state<<4)|motorstate;
         if(remotesend_state)
         {
             memcpy(&tx_nearresp_msg[REMOTEPARA_INDEX],remotetag_para,REMOTEPARA_LEN);
            dwt_writetxdata(22+REMOTEPARA_LEN, tx_nearresp_msg, 0);//写入发送数据
            dwt_writetxfctrl(22+REMOTEPARA_LEN, 0);//设定发送长度		
         }else{
         dwt_writetxdata(22, tx_nearresp_msg, 0);//写入发送数据
         dwt_writetxfctrl(22, 0);//设定发送长度
         }
         tx_nearresp_msg[MOTORSTATE_INDEX]=motorstate;//(remotesend_state<<4)|motorstate;
         tx_nearresp_msg[MOTORSTATE_INDEX]&=0x0f;
//         if(remotesend_state)
//         {
//             memcpy(&tx_nearresp_msg[REMOTEPARA_INDEX],remotetag_para,REMOTEPARA_LEN);
//            dwt_writetxdata(22+REMOTEPARA_LEN, tx_nearresp_msg, 0);//写入发送数据
//            dwt_writetxfctrl(22+REMOTEPARA_LEN, 0);//设定发送长度		
//         }else{
         dwt_writetxdata(24, tx_nearresp_msg, 0);//写入发送数据
         dwt_writetxfctrl(24, 0);//设定发送长度
      //   }
         result = dwt_starttx(DWT_START_TX_DELAYED | DWT_RESPONSE_EXPECTED);//延迟发送，等待接收

         
@@ -977,7 +974,7 @@
               //dist_cm=33000;
               getrange_success = 1;
               
               LED0_BLINK; //每成功一次通讯则闪烁一次
               //LED0_BLINK; //每成功一次通讯则闪烁一次
               dis_after_filter=dist_cm;
               hex_dist = dist_cm+(int16_t)g_com_map[DIST_OFFSET]*10;

@@ -998,7 +995,7 @@
                  }
               if(abs(hex_dist-his_dist[taglist_pos])<dist_threshold||misdist_num[taglist_pos]>3)
               {
						
                  u8 error_flag = 0;
                        g_Resttimer=0;
                        IWDG_Feed();
                  #ifdef TDFILTER
@@ -1011,12 +1008,12 @@
                  #endif
                  misdist_num[taglist_pos]=0;
               tagdist_list[taglist_pos] = filter_dist;   
               his_dist[taglist_pos]=hex_dist;	
					
                        if(hex_dist>0)
                  {
                            g_Tagdist[taglist_pos]=hex_dist/10;   
                        }else{
                            g_Tagdist[taglist_pos]= 999999;
                            g_Tagdist[taglist_pos]= 0x2ffff;
                        }
            #ifdef USART_SINGLE_OUTPUT
               usart_send[2] = 1;//正常模式 
@@ -1025,7 +1022,7 @@
               memcpy(&usart_send[5],&tag_id_recv,2);
               memcpy(&usart_send[7],&dev_id,2);         
                            if(tagdist_list[taglist_pos]<=0)
                                tagdist_list[taglist_pos]=999999;
                                tagdist_list[taglist_pos]=0x2ffff;
               memcpy(&usart_send[9],&tagdist_list[taglist_pos],4);
               usart_send[13] = battary;
               usart_send[14] = button;
@@ -1033,7 +1030,40 @@
               usart_send[16] = rx_power;
               checksum = Checksum_u16(&usart_send[2],17);
               memcpy(&usart_send[19],&checksum,2);
               UART_PushFrame(usart_send,21);
                    firstpath_power2 = rx_buffer[TAGRXPOWER_IDX];
                            firstpath_power = -(int)firstpath_power;
                    if(firstpath_power2>firstpath_power)
                    {
                        if(firstpath_power2>93)
                        {
                            printf("错误1：被测模块接收损坏\r\n");
                            error_flag = 1;
                        }
                        if(firstpath_power<84)
                        {
                            printf("错误2：功率过大\r\n");
                            error_flag = 1;
                        }
                    }else{
                        if(firstpath_power>93)
                        {
                            printf("错误3：被测模块发射损坏\r\n");
                            error_flag = 1;
                        }
                        if(firstpath_power2<84)
                        {
                            printf("错误2：功率过大\r\n");
                            error_flag = 1;
                        }
                    }
                    if(error_flag == 0&&his_dist[taglist_pos]!=hex_dist)
                    {
                        LED0_BLINK; 
                        printf("通过\r\n");
                    }
                    his_dist[taglist_pos]=hex_dist;	
                    printf("包序：%d。距离：%d cm。接收强度: %d。发射强度：%d强度合格范围（大于83小于94）\r\n",frame_seq_nb2,g_Tagdist[taglist_pos],(int)firstpath_power,(int)firstpath_power2);
               //UART_PushFrame(usart_send,21);
            #else      
               memcpy(&usart_send_anc[4+6*anc_report_num],&tag_id_recv,2);
               memcpy(&usart_send_anc[6+6*anc_report_num],&tagdist_list[taglist_pos],4);
@@ -1142,7 +1172,7 @@
            memcpy(&tag_id_recv,&rx_buffer[TAG_ID_IDX],2);
                memcpy(&rec_ancidlist,&rx_buffer[NEARBASEID_INDEX],2*rec_nearbase_num);
                memcpy(&rec_ancdistlist,&rx_buffer[NEARBASEID_INDEX+2*rec_nearbase_num],2*rec_nearbase_num);
                memcpy(&rec_antdelay,&rx_buffer[NEARBASEID_INDEX+nearbase_num*4],2);
                memcpy(&rec_antdelay,&rx_buffer[NEARBASEID_INDEX+rec_nearbase_num*4],2);
            #ifdef USART_ALL_OUTPUT
                    usart_send[2] = 0x0c;//正常模式 
               usart_send[3] = 8+rec_nearbase_num*4;//数据段长度