增加低压启动重启功能

zhyinch

2020-10-10 eede6129470e056b9e87d192f9a2096525b7c686

 Ô´Âë/ºËÐÄ°å/Src/application/dw_app.c

@@ -5,7 +5,7 @@
   DISCPOLL,
   GETNEARMSG,
   NEARPOLL,
}tag_state=GETNEARMSG;
}tag_state=NEARPOLL;
static dwt_config_t config = {
   2,               /* Channel number. */
   DWT_PRF_64M,     /* Pulse repetition frequency. */
@@ -28,7 +28,7 @@

static uint8_t tx_near_msg[80] = {0};

static uint32_t frame_seq_nb = 0;	
 uint32_t frame_seq_nb = 0, frame_seq_nb2 = 0;	
static uint32_t status_reg = 0;
static uint8_t rx_buffer[100];
static uint64_t poll_tx_ts;
@@ -208,7 +208,31 @@
u16 nearbaseid_list[MAX_NEARBASE_NUM],mainbase_id,true_nearbase_idlist[MAX_NEARBASE_NUM];
int32_t mainbase_dist,nearbase_distlist[MAX_NEARBASE_NUM],true_nearbase_distlist[MAX_NEARBASE_NUM],true_exsistbase_list[MAX_NEARBASE_NUM];
uint8_t trygetnearmsg_times;
u16 current_slotnum,total_slotnum,target_time,last_time;
u32 rec_tagpos_binary;
extern uint32_t tagpos_binary;
void SetNextPollTime(u16 time)
{
   current_slotnum++;
   if(current_slotnum==total_slotnum)
      current_slotnum-=total_slotnum;
   //time=5;
   target_time=((current_slotnum*g_com_map[COM_INTERVAL])+time);

   last_time=target_time;
   if(target_time>=990&&target_time<992)
   {
      current_slotnum++;
   target_time+=g_com_map[COM_INTERVAL];
   tagslotpos=GetRandomSlotPos(rec_tagpos_binary|tagpos_binary);
   tyncpoll_time = (tagslotpos--%max_slotpos)*slottime;	
   }	
   if(target_time>=1000)
   {target_time-=1000;}
   if(target_time<0)
   {target_time+=1000;}

}
u8 FindNearBasePos(u16 baseid)
{
   u8 i;
@@ -251,11 +275,43 @@
//      change_base_count=0;
//   }
//}
uint8_t GetRandomValue(void)
{
   uint8_t random_value=0,temp_adc,i;
   for(i=0;i<8;i++)
   {
      temp_adc=Get_ADC_Value();
      random_value=random_value|((temp_adc&0x01)<<i);
   }
   return random_value;
}
u8 GetRandomSlotPos(uint32_t emptyslot)
{
   u8 i,temp_value;
   temp_value = GetRandomValue();
   for(i=temp_value%max_slotpos;i<max_slotpos;i++)
   {
      if(((emptyslot>>i)&0x1)==0)
      {
         return i;
      }
   }
	
      for(i=1;i<max_slotpos;i++)
   {
      if(((emptyslot>>i)&0x1)==0)
      {
         return i;
      }
   }
return max_slotpos-1;
}
u8 test=0;
u8 anclost_times=0;
u8 exsistbase_list[MAX_NEARBASE_NUM],report_num,get_newbase=0;;
u8 exsistbase_list[MAX_NEARBASE_NUM],report_num,get_newbase=0;
u16 temp_sync_timer1,temp_sync_timer2;
void NearPoll(void)

 void NearPoll(void)
{
   static u8 mainbase_lost_count=0,flag_finalsend,flag_rxon;
   uint32_t temp1,temp2,dw_systime;
@@ -264,7 +320,6 @@
   u32 start_poll;
   u8 i,j,getsync_flag=0,timeout;
//   printf("%d",sync_timer);
      dwt_forcetrxoff();
    dwt_setrxaftertxdelay(POLL_TX_TO_RESP_RX_DLY_UUS);         //设置发送后开启接收，并设定延迟时间
    dwt_setrxtimeout(RESP_RX_TIMEOUT_UUS);      
   tag_succ_times = 0;
@@ -292,7 +347,7 @@
   flag_rxon=1;
   neartimout_timer=0;
   get_newbase=0;
   timeout=ceil((float)nearbase_num/4)+2;
   timeout=ceil((float)nearbase_num*SLOT_SCALE)+3;
   //timeout=5;
   mainbase_dist=100000;
   mainbase_lost_count++;
@@ -347,11 +402,15 @@
                           temp_sync_timer2=sync_timer;
                           memcpy(&temp_sync_timer1,&rx_buffer[ANCTIMEMS],2);
                           memcpy(&tmp_time,&rx_buffer[ANCTIMEUS],2);
									
									
                           if(g_com_map[DEV_ROLE]!=0)
                           {
                           sync_timer=temp_sync_timer1;
                           exsistbase_list[0]=KEEP_TIMES;
////                           memcpy(&tagslotpos,&rx_buffer[TAGSLOTPOS],2);      
//                           
                           tmp_time=tmp_time+650;
									
                              tmp_time=tmp_time+650;
                           if(tmp_time>999)
                           {
                              tmp_time-=999;
@@ -360,16 +419,19 @@
                                 {sync_timer=0;}
                           }
                           TIM3->CNT=tmp_time;
									
                        }
                           current_slotnum=temp_sync_timer1/g_com_map[COM_INTERVAL];
//                           if(tagslotpos>max_slotpos)
//                              tagslotpos=tagslotpos%(max_slotpos+1);
//                              tyncpoll_time=(tagslotpos-1)*slottime;
                           ////////////////////////////
                           rec_nearbasepos=0;
                           exsistbase_list[rec_nearbasepos]=10;
									
                           memcpy(&temp_dist,&rx_buffer[DIST_IDX],4);
                           nearbase_distlist[rec_nearbasepos]=temp_dist;
									
                        if(temp_dist!=0x1ffff)
                           exsistbase_list[rec_nearbasepos]=KEEP_TIMES;
								
                           mainbase_lost_count=0;
                           flag_finalsend=1;
                           final_tx_time = (resp_rx_ts + ((RESP_RX_TO_FINAL_TX_DLY_UUS+DELAY_BETWEEN_TWO_FRAME_UUS*nearbase_num+500) * UUS_TO_DWT_TIME)) >> 8;
@@ -383,23 +445,35 @@
                           tx_nearfinal_msg[MESSAGE_TYPE_IDX]=NEAR_FINAL;
                           dwt_writetxdata(28+nearbase_num*4, tx_nearfinal_msg, 0);//将发送数据写入DW1000
                           dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
                           if(temp_dist!=0x1ffff)
                           memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
                        if(temp_dist!=0x1ffff)
                           {
                           #ifndef USART_INTEGRATE_OUTPUT
                              #ifndef USART_INTEGRATE_OUTPUT
                              usart_send[2] = 1;//正常模式
                              usart_send[3] = 17;//数据段长度
                              usart_send[4] = frame_seq_nb;//数据段长度
                              if(g_com_map[DEV_ROLE])
                              {
                              memcpy(&usart_send[5],&dev_id,2);
                              memcpy(&usart_send[7],&rec_nearbaseid,2);				
                              memcpy(&usart_send[7],&rec_nearbaseid,2);		
                              }else{
                              memcpy(&usart_send[5],&rec_nearbaseid,2);
                              memcpy(&usart_send[7],&dev_id,2);	
                              }											
                              memcpy(&usart_send[9],&rx_buffer[DIST_IDX],4);
                              usart_send[13] = battary;
                              usart_send[14] = button;
                              checksum = Checksum_u16(&usart_send[2],17);
                              memcpy(&usart_send[19],&checksum,2);
                              UART_PushFrame(usart_send,21);
                           #endif
                           }
                           //result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送			
                              #endif

                           //dwt_setdelayedtrxtime(final_tx_time);//设置final包发送时间T5
                        //   result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送			
                           //dwt_writetxdata(4,&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos+1)*4], FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos+1)*4);//将发送数据写入DW1000
                        }
		
									
                        }else{
                           rec_nearbasepos=FindNearBasePos(rec_nearbaseid);
                           if(rec_nearbasepos>=last_nearbase_num)          //发现新的基站
@@ -410,22 +484,32 @@
                              memcpy(&tx_nearfinal_msg[ANCHOR_ID_IDX],&rec_nearbaseid,2);
                           }
                           
                           exsistbase_list[rec_nearbasepos]=KEEP_TIMES;
                           memcpy(&temp_dist,&rx_buffer[DIST_IDX],4);
                           nearbase_distlist[rec_nearbasepos]=temp_dist;
									
                           if(temp_dist!=0x1ffff)
                           exsistbase_list[rec_nearbasepos]=KEEP_TIMES;
                           
                           final_msg_set_ts(&tx_nearfinal_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos)*4], resp_rx_ts);                        
                           dwt_writetxdata(28+nearbase_num*4, tx_nearfinal_msg, 0);//将发送数据写入DW1000
                           dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
                           LED0_BLINK;
//                           memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
//                           tagslotpos=GetRandomSlotPos(rec_tagpos_binary);
                           if(temp_dist!=0x1ffff)
                           {
                              #ifndef USART_INTEGRATE_OUTPUT
                              usart_send[2] = 1;//正常模式
                              usart_send[3] = 17;//数据段长度
                              usart_send[4] = frame_seq_nb;//数据段长度
                              if(g_com_map[DEV_ROLE])
                              {
                              memcpy(&usart_send[5],&dev_id,2);
                              memcpy(&usart_send[7],&rec_nearbaseid,2);				
                              memcpy(&usart_send[7],&rec_nearbaseid,2);		
                              }else{
                              memcpy(&usart_send[5],&rec_nearbaseid,2);
                              memcpy(&usart_send[7],&dev_id,2);	
                              }											
                              memcpy(&usart_send[9],&rx_buffer[DIST_IDX],4);
                              usart_send[13] = battary;
                              usart_send[14] = button;
@@ -460,22 +544,23 @@
         j=0;
         if(exsistbase_list[0]==0)
         {
          u8 temp_adc,random_value;
            random_value=0;
            for(i=0;i<8;i++)
            {
               temp_adc=Get_ADC_Value();
               random_value=random_value|((temp_adc&0x01)<<i);
            }
            tyncpoll_time=(random_value%max_slotpos)*slottime;	
//          u8 temp_adc,random_value;
//            random_value=0;
//            for(i=0;i<8;i++)
//            {
//               temp_adc=Get_ADC_Value();
//               random_value=random_value|((temp_adc&0x01)<<i);
//            }
            tagslotpos=GetRandomSlotPos(rec_tagpos_binary|tagpos_binary);
            tyncpoll_time = (tagslotpos--%max_slotpos)*slottime;
      tag_state=NEARPOLL;		
         }
      //   tyncpoll_time=0;
         next_nearbase_num=0;
         for(i=0;i<last_nearbase_num+get_newbase;i++)
         {
            if(exsistbase_list[i]>0)
            {
				
            {		
               next_nearbase_num++;
               true_exsistbase_list[j]=exsistbase_list[i];
               true_nearbase_idlist[j]=nearbaseid_list[i];         
@@ -513,7 +598,7 @@
         {
            nearbaseid_list[i]=true_nearbase_idlist[i];
            nearbase_distlist[i]=true_nearbase_distlist[i];
            if(nearbase_distlist[i]!=0x1ffff&&true_exsistbase_list[i]==0xa)
            if(nearbase_distlist[i]!=0x1ffff&&true_exsistbase_list[i]==KEEP_TIMES)
            {
               memcpy(&usart_send[4+6*report_num],&nearbaseid_list[i],2);
               memcpy(&usart_send[6+6*report_num],&nearbase_distlist[i],4);
@@ -548,13 +633,10 @@
//         }else{
//            anclost_times=0;
//         }

   dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR);


dwt_forcetrxoff();
   dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR| SYS_STATUS_TXFRS |SYS_STATUS_RXFCG);
}
u8 nearmsg_mainbase=0;
u32 rec_tagpos_binary;
u8 nearmsg_mainbase=0,rec_tagpos_emptylist[32];
void GetNearMsg(void)
{
   u32 start_poll,frame_len;
@@ -591,34 +673,50 @@
      {
         next_nearbase_num=rx_buffer[NEARBASENUM_INDEX];
         memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
         tagslotpos=rx_buffer[TAGSLOTPOS];
         tagslotpos=GetRandomSlotPos(rec_tagpos_binary);
         //tagslotpos=rx_buffer[TAGSLOTPOS];
         memcpy(nearbaseid_list,&rx_buffer[NEARBASEID_INDEX],next_nearbase_num*2);
         slottime=ceil((nearbase_num+2)*0.3)+1;
         //slottime=ceil((nearbase_num+2)*0.4)+2;
         tyncpoll_time=tagslotpos*slottime;
         tag_state=NEARPOLL;
      }else{
            tyncpoll_time = (tagslotpos--%max_slotpos)*slottime;
      }
   }else{
         tyncpoll_time = (tagslotpos--%max_slotpos)*slottime;
   }
	
            #ifdef USART_INTEGRATE_OUTPUT		
            usart_send[2] = 4;//正常模式
            usart_send[3] = report_num*6+2;//正常模式
            checksum = Checksum_u16(&usart_send[2],report_num*6+2);
            memcpy(&usart_send[4+report_num*6],&checksum,2);
            UART_PushFrame(usart_send,6+report_num*6);
         #endif
}

void Tag_App(void)//发送模式(TAG标签)
{
   //LED0_ON;
   dwt_forcetrxoff();
   g_Resttimer=0;
      GPIO_WriteBit(GPIOA, GPIO_Pin_10, Bit_SET);	
   switch(tag_state)
   {
      case DISCPOLL:
         
         break;
      case GETNEARMSG:
         GetNearMsg();
           GetNearMsg();
         break;
      case NEARPOLL:
            NearPoll();
         break;
	
	
   }

   SetNextPollTime(tyncpoll_time);
   g_start_send_flag = 0;		
   GPIO_WriteBit(GPIOA, GPIO_Pin_10, Bit_RESET);	
}

int8_t correction_time,new_tagid=0;
@@ -675,7 +773,7 @@

         battary = rx_buffer[BATTARY_IDX];
         button = rx_buffer[BUTTON_IDX];
         frame_seq_nb = rx_buffer[SEQUENCE_IDX];
         frame_seq_nb2 = rx_buffer[SEQUENCE_IDX];
         if(result==0)
         {
            while (!((status_reg = dwt_read32bitreg(SYS_STATUS_ID)) & (SYS_STATUS_RXFCG | SYS_STATUS_ALL_RX_ERR)))///不断查询芯片状态直到接收成功或者出现错误
@@ -728,6 +826,7 @@
u8 misdist_num[TAG_NUM_IN_SYS],seize_anchor;
u8 Anchor_RecNearPoll(u8 ancrec_nearbasepos) //0 mainbase  1 first near_base
{
   u8 motorstate;
         tmp_time=TIM3->CNT;
         memcpy(&tx_nearresp_msg[ANCTIMEMS],&sync_timer,2);
         memcpy(&tx_nearresp_msg[ANCTIMEUS],&tmp_time,2);
@@ -739,7 +838,20 @@
         dwt_setdelayedtrxtime(resp_tx_time);//设置Response发送时间T3
         dwt_setrxaftertxdelay(RESP_TX_TO_FINAL_RX_DLY_UUS+(rec_nearbase_num+1-ancrec_nearbasepos)*DELAY_BETWEEN_TWO_FRAME_UUS);//设置发送完成后开启接收延迟时间
         dwt_setrxtimeout(FINAL_RX_TIMEOUT_UUS);//接收超时时间

			
         if(tagdist_list[taglist_pos]<g_com_map[ALARM_DISTANCE1])
         {
            motorstate =0;
         }else if(tagdist_list[taglist_pos]<g_com_map[ALARM_DISTANCE2])
         {
            motorstate =2;
         }else if(tagdist_list[taglist_pos]<g_com_map[ALARM_DISTANCE3])
         {
            motorstate =1;
         }else{
            motorstate =0;
         }
			
         if(new_tagid)
         {
            tagdist_list[taglist_pos]=0x1ffff;
@@ -749,14 +861,21 @@
         }
         tx_nearresp_msg[MAINBASE_INDEX]=flag_syncbase;
         tx_nearresp_msg[MESSAGE_TYPE_IDX]=NEAR_RESPONSE;
			
         dwt_writetxdata(21, tx_nearresp_msg, 0);//写入发送数据
         dwt_writetxfctrl(21, 0);//设定发送长度
         tx_nearresp_msg[MOTORSTATE_INDEX]=(remotesend_state<<4)|motorstate;
         if(remotesend_state)
         {
             memcpy(&tx_nearresp_msg[REMOTEPARA_INDEX],remotetag_para,REMOTEPARA_LEN);
            dwt_writetxdata(22+REMOTEPARA_LEN, tx_nearresp_msg, 0);//写入发送数据
            dwt_writetxfctrl(22+REMOTEPARA_LEN, 0);//设定发送长度		
         }else{
         dwt_writetxdata(22, tx_nearresp_msg, 0);//写入发送数据
         dwt_writetxfctrl(22, 0);//设定发送长度
         }
         result = dwt_starttx(DWT_START_TX_DELAYED | DWT_RESPONSE_EXPECTED);//延迟发送，等待接收

         battary = rx_buffer[BATTARY_IDX];
         button = rx_buffer[BUTTON_IDX];
         frame_seq_nb = rx_buffer[SEQUENCE_IDX];
         frame_seq_nb2 = rx_buffer[SEQUENCE_IDX];
         if(result==0)
         {
            while (!((status_reg = dwt_read32bitreg(SYS_STATUS_ID)) & (SYS_STATUS_RXFCG | SYS_STATUS_ALL_RX_ERR))&&!g_start_sync_flag)///不断查询芯片状态直到接收成功或者出现错误
@@ -806,17 +925,18 @@
               dis_after_filter=dist_cm;
               hex_dist = dist_cm+(int16_t)g_com_map[DIST_OFFSET];
               g_flag_Taggetdist[taglist_pos]=0;
               if(hex_dist>-1000&&hex_dist<100000)
               if(hex_dist>-1000&&hex_dist<200000)
               {
               if(abs(hex_dist-his_dist[taglist_pos])<1500||misdist_num[taglist_pos]>3)
               {
                  misdist_num[taglist_pos]=0;
               tagdist_list[taglist_pos] = hex_dist;   
               his_dist[taglist_pos]=hex_dist;   
                  g_Tagdist[taglist_pos]=hex_dist;	
            #ifndef USART_INTEGRATE_OUTPUT
               usart_send[2] = 1;//正常模式
               usart_send[2] = 1;//正常模式 
               usart_send[3] = 17;//数据段长度
               usart_send[4] = frame_seq_nb;//数据段长度
               usart_send[4] = frame_seq_nb2;//数据段长度
               memcpy(&usart_send[5],&tag_id_recv,2);
               memcpy(&usart_send[7],&dev_id,2);            
               memcpy(&usart_send[9],&tagdist_list[taglist_pos],4);
@@ -836,17 +956,14 @@
               }
            }
         }
		
         }else{
               //printf("%x/n",status_reg);
            dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR);
         }
	
}
uint32_t current_syncid=0xffffffff,synclost_timer;
extern u8 flag_syncbase;
extern uint32_t tagpos_binary;
u8 tagpos_rec[50],tagpos_send[50],ancidlist_num;
u8 tagpos_rec[50],tagpos_send[50],ancidlist_num,getrange_success=0;
u16 ancidlist_rec[20],ancidlist_send[20];
void Anchor_App(void)
{
@@ -855,32 +972,37 @@
   u16 tempid;
   uint32_t rec_syncid;
   
   dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR| SYS_STATUS_TXFRS |SYS_STATUS_RXFCG);
   g_start_sync_flag=0;

   dwt_setrxtimeout(0);//设定接收超时时间，0位没有超时时间
   dwt_rxenable(0);//打开接收

//   GPIO_WriteBit(GPIOA, GPIO_Pin_10, Bit_SET);	
   while (!((status_reg = dwt_read32bitreg(SYS_STATUS_ID)) & (SYS_STATUS_RXFCG | SYS_STATUS_ALL_RX_ERR))&&!g_start_send_flag&&!g_start_sync_flag)//不断查询芯片状态直到接收成功或者出现错误
   { 
		
      IdleTask();
      g_Resttimer=0;
   };

//GPIO_WriteBit(GPIOA, GPIO_Pin_10, Bit_RESET);	
   if (status_reg & SYS_STATUS_RXFCG)//成功接收
   { u16 tag_recv_interval;
      float temp_tagpos;
	
      getrange_success = 1;
      g_Resttimer=0;
      dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_RXFCG);//清除标志位
      frame_len = dwt_read32bitreg(RX_FINFO_ID) & RX_FINFO_RXFL_MASK_1023;//获得接收数据长度
      dwt_readrxdata(rx_buffer, frame_len, 0);//读取接收数据
      memcpy(&anc_id_recv,&rx_buffer[ANCHOR_ID_IDX],2);
      //将收到的tag_id分别写入各次通讯的包中，为多标签通讯服务，防止一次通讯中接收到不同ID标签的数据
      //tag_id_recv = rx_buffer[TAG_ID_IDX];
      memcpy(&tag_id_recv,&rx_buffer[TAG_ID_IDX],2);
      switch(rx_buffer[MESSAGE_TYPE_IDX])
      {
//         case POLL:
//            if (anchor_type == rx_buffer[ANC_TYPE_IDX])
//            Anchor_RecPoll();
//            break;
         case SYNC:
				
         case SYNC:			
            memcpy(&rec_syncid,&rx_buffer[ANCHOR_ID_IDX],4);
            if(rec_syncid<current_syncid)
            {
@@ -921,10 +1043,8 @@
            }
            break;
      
         case NEAR_POLL:
				
         case NEAR_POLL:			
            memcpy(&tag_id_recv,&rx_buffer[TAG_ID_IDX],2);
            memcpy(&anc_id_recv,&rx_buffer[ANCHOR_ID_IDX],2);
            taglist_pos=CmpTagInList(tag_id_recv);
            if(taglist_pos==taglist_num)
            {
@@ -936,10 +1056,16 @@
               new_tagid=0;
            }
            tagofflinetime[taglist_pos]=0;
           temp_tagpos=round((float)(sync_timer%g_com_map[COM_INTERVAL])/slottime);
          temp_tagpos=round((float)(sync_timer%g_com_map[COM_INTERVAL])/slottime);
            tagpos_rec[(u8)temp_tagpos]=1;
            rec_nearbase_num=rx_buffer[NEARBASENUM_INDEX];
         
            if(rec_nearbase_num>ancidlist_num)
               {
                  ancidlist_num=rec_nearbase_num;
                  memcpy(ancidlist_rec,&rx_buffer[NEARBASEID_INDEX],rec_nearbase_num*2);
               }
					
            for(i=0;i<rec_nearbase_num;i++)
            {
                memcpy(&tempid,&rx_buffer[NEARBASEID_INDEX+i*2],2);
@@ -955,19 +1081,11 @@
                  seize_anchor=1;   //抢占anchor
                  Anchor_RecNearPoll(i);   
               }
               if(rec_nearbase_num>ancidlist_num)
               {
                  ancidlist_num=rec_nearbase_num;
                  memcpy(ancidlist_rec,&rx_buffer[NEARBASEID_INDEX],rec_nearbase_num*2);
               }

            
            break;
		
      }
		
   }
   else
   {
            break;		
      }	
   }else{
      dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR);
   }
}