1

yincheng.zhong

2023-06-13 34f583c063d2a17252fc1be2927aa63524631a38

 Src/main.c

@@ -265,11 +265,17 @@
   }
   if(g_com_map[IMU_THRES]>10)
   {g_com_map[IMU_THRES]=2;}
    if(g_com_map[POWER]>MAX_RFPOWER)
      {g_com_map[POWER]=MAX_RFPOWER;}
      if(g_com_map[POWER]<0)
      {g_com_map[POWER]=0;}
    if(g_com_map[POWER]>MAX_RFPOWER)
        {g_com_map[POWER]=MAX_RFPOWER;}
    if(g_com_map[POWER]<0)
        {g_com_map[POWER]=0;}
    if(g_com_map[STATIONARY_TIME]==0)
        {
        g_com_map[STATIONARY_TIME]=10;
        }
        
}
uint8_t uwb_active_flag = 0;
u8 active_flag=0;
void Program_Init(void)
{   float temp;
@@ -281,7 +287,7 @@
   hardware_pici= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
   hardware_type= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
   //deca_sleep(1000);
   g_com_map[VERSION] = (2<<8)|53;
   g_com_map[VERSION] = (2<<8)|65;
    
//   g_com_map[DEV_ID]=0x7;
#ifdef DEBUG_MODE
@@ -309,7 +315,7 @@
   module_power = g_com_map[POWER];
   imu_enable=g_com_map[IMU_ENABLE];
   motor_enable=g_com_map[MOTOR_ENABLE];
	
   uwb_active_flag = g_com_map[UWB_ACTIVE_FLAG_IDX];
   group_id=g_com_map[GROUP_ID];
   dev_id = g_com_map[DEV_ID];
   //slottime=ceil((double)g_com_map[MAX_REPORT_ANC_NUM]*SLOT_SCALE)+3;
@@ -353,7 +359,7 @@
void HardWareTypeDiffConfig(void)
{
   GPIO_InitTypeDef GPIO_InitStruct = {0};
   //if(g_com_map[MOTORBEEPER_INDEX]!=1&&g_com_map[MOTORBEEPER_INDEX]!=2)
   if(g_com_map[MOTORBEEPER_INDEX]!=1&&g_com_map[MOTORBEEPER_INDEX]!=2)
   {
         g_com_map[MOTORBEEPER_INDEX] = 2;
   }
@@ -372,6 +378,25 @@
         MX_TIM2_Init();
         break;
      }
}

void DoubleClickProcess(void)
{ char temp[50];
  uint8_t len;  
if(uwb_active_flag)
{
    uwb_active_flag = 0;
    HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
    HAL_Delay(3000);
    HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
}else{
    uwb_active_flag = 1;
    HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_3);
    HAL_Delay(1000);
    HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_3);
}
   g_com_map[UWB_ACTIVE_FLAG_IDX]= uwb_active_flag;
save_com_map_to_flash();
}
void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
{
@@ -416,8 +441,8 @@
  /* USER CODE BEGIN 2 */
   LED_LG_ON;
   Program_Init();
   LIS3DH_Data_Init();	
  BarInit();
   Accelerometer_Init();	
    BarInit();
   Dw1000_Init();
   Dw1000_App_Init();
   HardWareTypeDiffConfig();
@@ -429,7 +454,7 @@
   {
    Error_Handler();
   }
    LIS3DH_Check();
   
   
//   HAL_Delay(2000);
//   mcu_sleep();
@@ -456,7 +481,7 @@
            HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);  
#endif
         }
      if(g_start_send_flag&&active_flag)
      if(g_start_send_flag&&active_flag&&uwb_active_flag)
   { static uint16_t blink_count=0;
      g_start_send_flag = 0;   
   //   GetPressAndTemp();
@@ -913,7 +938,7 @@
   HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
   HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
   
   LIS3DH_Check();

   
   HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);  
   HAL_PWR_DisableWakeUpPin(PWR_WAKEUP_PIN1);  
@@ -927,7 +952,7 @@
extern u16 tagslotpos;
extern uint8_t tx_near_msg[80],stationary_flag,gotosleep_flag;
float key_keeptime;
extern float motor_ontime;
extern float motor_ontime,button_delay;
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
{
   static uint8_t i=0;
@@ -935,6 +960,8 @@
   g_start_send_flag=1;
//   current_slotnum++;
//   SetNextPollTime(tagslotpos);
    if(button_delay<1)
    button_delay+=1/(float)tag_frequency;
   nomove_count+=1/(float)tag_frequency;
   if(motor_keeptime>0)
   {