3.7，加入放开加速度阈值可以修改

WXK

2025-05-20 039f65a917fab431b629125b428fb1ede145ebbe

 APL/App.c

@@ -57,7 +57,9 @@
static HIDO_UINT32 l_u32LocationTick = 0;
extern ST_GPS l_stGPS;
extern uint32_t uwbled,gpsled,loraled,powerled;
uint8_t uwb_send[100]={0x55,0xaa};
uint8_t uwb_send[200]={0x55,0xaa};
void Uwb_Zubao_Poll();
extern IWDG_HandleTypeDef hiwdg;
/*******************************************************************************
 *                        Local Function Declaration                           *
 *******************************************************************************/
@@ -102,95 +104,43 @@
//    UDPClient_UploadGPS((char*)LBS_data);
}

/*******************************************************************************
 * Function Name     : App_Poll
 * Description       : 
 * Input             : 
 * Output            : None
 * Return            : None
 * Author            : www.hido-studio.com
 * Modified Date:    : 2021年5月07日
 *******************************************************************************/
//HIDO_VOID App_Poll(HIDO_VOID)
//{
//    // 充电状态
//    if(HAL_GPIO_ReadPin(GPIOA, GPIO_PIN_8) == GPIO_PIN_SET)
//    {
//        if(HIDO_FALSE == l_bCharge)
//        {
//            l_bCharge = HIDO_TRUE;
//            l_u32ChargeTick = 0;
//            l_u32CancelChargeReport = HIDO_FALSE;
//        }

//        if(l_bCharge == HIDO_TRUE && l_u32CancelChargeReport == HIDO_FALSE)
//        {
//            if((HIDO_TimerGetTick() - l_u32ChargeTick) >= HIDO_TIMER_TICK_S(10))
//            {
//                l_u32ChargeTick = HIDO_TimerGetTick();

//                // 发送状态
//            }
//        }

//        return;
//    }
//    else
//    {
//        l_bCharge = HIDO_FALSE;
//    }

//    // 设备被拆卸
//    if(HAL_GPIO_ReadPin(GPIOA, GPIO_PIN_11) == GPIO_PIN_RESET)
//    {
//        if(HIDO_FALSE == l_bDismantle)
//        {
//            l_bCancelAlarm = HIDO_FALSE;
//            l_bDismantle = HIDO_TRUE;
//            l_u32DismantleAlarmTick = 0;
//        }
//    }
//    else
//    {
//        l_bDismantle = HIDO_TRUE;
//    }

//    // 启动蜂鸣器
//    if(l_bDismantle == HIDO_TRUE && l_bCancelAlarm == HIDO_FALSE)
//    {
//        // 蜂鸣器动作

//        // 每隔10秒发送一次告警
//        if((HIDO_TimerGetTick() - l_u32DismantleAlarmTick) >= HIDO_TIMER_TICK_S(10))
//        {
//            l_u32DismantleAlarmTick = HIDO_TimerGetTick();

//            // 发送告警
//        }
//    }

//    // 10分钟上报一次位置
//    if((HIDO_TimerGetTick() - l_u32LocationTick) >= HIDO_TIMER_TICK_S(1/*0 * 60*/))
//    {
//        l_u32LocationTick = HIDO_TimerGetTick();

//        // GPS定位有效
//        if(l_stGPS.m_eState)
//        {
//            // 发送GNSS位置
//        }
//        // GPS定位无效
//        else
//        {
//            // 获取LBS位置
//            Module_GetLBSLocationAsync(LBSLocationCallback, HIDO_NULL);
//        }
//    }
//}
extern uint16_t nomove_count;
extern uint8_t bat_percent;
extern uint8_t chargedbg_flag;
u8 power_state = 0,chargeon = 0;
uint8_t chongman_flag;
extern  uint16_t chongdian_yundong_time;
extern uint8_t bat_percent;
extern uint16_t heart_time;
extern uint8_t nomove_flag;
uint16_t qidong_time;
#define QIDONG_TIME 60  //1分钟
#define DENGDAI_TIME 30//90s
//#define STOP_TIME 600-DENGDAI_TIME-QIDONG_TIME//600s 10分钟
#define YUNDONG_UWB_TIME 1
#define YUNDONG_GPS4G_TIME 100
extern UART_HandleTypeDef huart2;
uint8_t GPS_data[200];
uint8_t GPS_successful_flag;
uint8_t fangchai_flag;
uint8_t fangchai_state;
uint8_t only_one_flag;
uint8_t only_one_flag1;
extern uint16_t fangchai_time;
extern uint8_t taglist_num;
uint16_t tagseq;
extern uint16_t tagid_list[ANC_MAX_NUM],tagdist_list[ANC_MAX_NUM];
extern uint8_t yundong_state;
extern uint16_t yundong_time;
extern uint8_t tagbat_list[ANC_MAX_NUM];
extern TIM_HandleTypeDef htim3;
extern uint8_t beep_state;
extern uint8_t air780_state;
extern uint16_t sleep_time;
uint8_t zuihoufasong_falg;
uint8_t UDPClient_UploadGPS_flag;
extern uint16_t chongdianmeiyouuwb_time;
void PowerLedTask(void)
{ 
     static u8 powerled_state=0;
@@ -202,12 +152,68 @@
            power_state = 1;
        }
       while(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin)&&DBG_GetMode() == DBG_MODE_CHARGE)
    {
        {
            nomove_count = 0;
            HAL_IWDG_Refresh(&hiwdg);
        DBG_Poll();
         IdleTask();
     }
        IdleTask();
        uwbled=LEDOFF;
        Internet_Poll();
        HIDO_TimerPoll();
        HIDO_ATLitePoll();
        UDPClient_Poll();
            GPS_Poll();
            if(bat_percent>90)
            {
                powerled = RED;
                chongman_flag=1;
            }
            else
            {
                powerled = RED;
            }
                if(chongdianmeiyouuwb_time>30)
                {
                HAL_NVIC_SystemReset();
                }
                if(taglist_num>0)
                {
                    if(air780_state>=2)
                    {   
                        HAL_NVIC_SystemReset();
                    }
                    if(chongdian_yundong_time>=YUNDONG_UWB_TIME)
                    {
                        air780_state=0;
                        chongdian_yundong_time=0;
                        Uwb_Zubao_Poll();
                        UDPClient_UploadGPS((char*)GPS_data);
//                        UDPClient_UploadGPS_flag=1;
                        HexToAsciiSendUDP(uwb_send,19+5*taglist_num);
                        taglist_num=0;
                        chongdianmeiyouuwb_time=0;
                    }
                }
                else
                {
                        if(chongdian_yundong_time>=g_com_map[GPS_HZ])
                        {
                            chongdian_yundong_time=0;
                            if(GPS_successful_flag)
                            {
                                UDPClient_UploadGPS((char*)GPS_data);
//                                UDPClient_UploadGPS_flag=1;
                            }
                            else
                            {
                                Module_GetLBSLocationAsync(LBSLocationCallback, HIDO_NULL);
                            }
                        }
                }
        }
        
    }

    chongman_flag=0;
    chargeon = 0;
   if(power_state)
    {              
@@ -234,8 +240,8 @@
//    hardware_type = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP + 4);
    //deca_sleep(1000);

    g_com_map[GROUP_ID]=0;
   g_com_map[VERSION] = (1<<8)|1;
    g_com_map[GROUP_ID]=3;
   g_com_map[VERSION] = (2<<8)|11;

    if (g_com_map[COM_INTERVAL] <50)
    {
@@ -272,10 +278,12 @@
      else          
      {g_com_map[GPS_HZ]=600;}
    }
    g_com_map[GPS_HZ]=1;
    if(g_com_map[CHAICHUGPS_HZ]<180||g_com_map[CHAICHUGPS_HZ]>3600)
    {
      {g_com_map[CHAICHUGPS_HZ]=600;}
    }
    g_com_map[CHAICHUGPS_HZ]=1800;
    if(g_com_map[NOMOVESLEEP_TIME]>120)
    {
       g_com_map[NOMOVESLEEP_TIME]=120;
@@ -294,24 +302,24 @@
    printf("服务器地址: %d.%d.%d.%d:%d.\r\n",g_com_map[IP_0],g_com_map[IP_1],g_com_map[IP_2],g_com_map[IP_3],g_com_map[PORT]);
    printf("当前运动时GPS工作间隔: %d .\r\n",g_com_map[GPS_HZ]);
    printf("当前被拆时GPS工作间隔: %d .\r\n",g_com_map[CHAICHUGPS_HZ]);
       if(g_com_map[RTCMMODE_INDEX] == RTCMMODE_TCP)
    {        printf("TCP_RTCM模式,服务器地址: %d.%d.%d.%d:%d.\r\n",g_com_map[TCP_IP_0],g_com_map[TCP_IP_1],g_com_map[TCP_IP_2],g_com_map[TCP_IP_3],g_com_map[TCP_PORT]);
    }else if(g_com_map[RTCMMODE_INDEX] == RTCMMODE_NTRIP)
    {
//        sprintf((char *)&g_com_map[NTRIP_HOST_INDEX],"140.143.212.42");
//        g_com_map[NTRIP_PORT_INDEX] = 8005;
//        sprintf((char *)&g_com_map[NTRIP_USERNANME_INDEX],"test006");
//        sprintf((char *)&g_com_map[NTRIP_PASSWORD_INDEX],"hxzk20151102");
//        sprintf((char *)&g_com_map[NTRIP_SOURCENAME_INDEX],"RTCM32_GNSS2");
        printf("NtripHost:%s.\r\n",(char *)&g_com_map[NTRIP_HOST_INDEX]);
        printf("NtripPort:%d.\r\n",g_com_map[NTRIP_PORT_INDEX]);
        printf("NtripUsername:%s.\r\n",(char *)&g_com_map[NTRIP_USERNANME_INDEX]);
        printf("NtripPassword:%s.\r\n",(char *)&g_com_map[NTRIP_PASSWORD_INDEX]);
        printf("NtripSourcename:%s.\r\n",(char *)&g_com_map[NTRIP_SOURCENAME_INDEX]);
    }else if(g_com_map[RTCMMODE_INDEX] == RTCMMODE_NONE)
    { 
        printf("单点定位模式模式. \r\n");
    }
//       if(g_com_map[RTCMMODE_INDEX] == RTCMMODE_TCP)
//    {        printf("TCP_RTCM模式,服务器地址: %d.%d.%d.%d:%d.\r\n",g_com_map[TCP_IP_0],g_com_map[TCP_IP_1],g_com_map[TCP_IP_2],g_com_map[TCP_IP_3],g_com_map[TCP_PORT]);
//    }else if(g_com_map[RTCMMODE_INDEX] == RTCMMODE_NTRIP)
//    {
////        sprintf((char *)&g_com_map[NTRIP_HOST_INDEX],"140.143.212.42");
////        g_com_map[NTRIP_PORT_INDEX] = 8005;
////        sprintf((char *)&g_com_map[NTRIP_USERNANME_INDEX],"test006");
////        sprintf((char *)&g_com_map[NTRIP_PASSWORD_INDEX],"hxzk20151102");
////        sprintf((char *)&g_com_map[NTRIP_SOURCENAME_INDEX],"RTCM32_GNSS2");
//        printf("NtripHost:%s.\r\n",(char *)&g_com_map[NTRIP_HOST_INDEX]);
//        printf("NtripPort:%d.\r\n",g_com_map[NTRIP_PORT_INDEX]);
//        printf("NtripUsername:%s.\r\n",(char *)&g_com_map[NTRIP_USERNANME_INDEX]);
//        printf("NtripPassword:%s.\r\n",(char *)&g_com_map[NTRIP_PASSWORD_INDEX]);
//        printf("NtripSourcename:%s.\r\n",(char *)&g_com_map[NTRIP_SOURCENAME_INDEX]);
//    }else if(g_com_map[RTCMMODE_INDEX] == RTCMMODE_NONE)
//    { 
//        printf("单点定位模式模式. \r\n");
//    }
}

void IdleTask(void)
@@ -333,32 +341,6 @@
        }

}
extern uint8_t bat_percent;
extern uint16_t heart_time;
extern uint8_t nomove_flag;
uint16_t qidong_time;
#define QIDONG_TIME 60  //1分钟
#define DENGDAI_TIME 30//90s
//#define STOP_TIME 600-DENGDAI_TIME-QIDONG_TIME//600s 10分钟
#define YUNDONG_UWB_TIME 1
#define YUNDONG_GPS4G_TIME 100
extern UART_HandleTypeDef huart2;
uint8_t GPS_data[100];
uint8_t GPS_successful_flag;
uint8_t fangchai_flag;
uint8_t fangchai_state;
uint8_t only_one_flag;
uint8_t only_one_flag1;
extern uint16_t fangchai_time;
extern uint8_t taglist_num;
uint16_t tagseq;
extern uint16_t tagid_list[ANC_MAX_NUM],tagdist_list[ANC_MAX_NUM];
extern uint8_t yundong_state;
extern uint16_t yundong_time;
extern uint8_t tagbat_list[ANC_MAX_NUM];
extern TIM_HandleTypeDef htim3;
extern uint8_t beep_state;
extern uint8_t air780_state;
void Stop_Mode_Poll()
{
    if(only_one_flag==0)
@@ -375,9 +357,11 @@

        HAL_GPIO_WritePin(GPIOB, GPIO_PIN_10, GPIO_PIN_RESET);    
        Radio.Sleep();
        dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
        dwt_entersleep();
    }
}
void Stop_Mode_chulelora_Poll()//关掉除了lora外的
void Stop_Mode_chulelora_Poll()//关掉除了uwb外的
{
    if(only_one_flag1==0)
    {
@@ -391,15 +375,19 @@
        GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
        HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);

        HAL_GPIO_WritePin(GPIOB, GPIO_PIN_10, GPIO_PIN_RESET);    
        HAL_GPIO_WritePin(GPIOB, GPIO_PIN_10, GPIO_PIN_RESET);  
        dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
        dwt_entersleep();        
    }
}
extern uint16_t testlorarecve;
void Uwb_Zubao_Poll()
{       
    uint16_t state_flag;
    u16 uwbchecksum;
    state_flag=fangchai_flag<<4;
    
        if(taglist_num>8)
        {taglist_num=8;}
        uwb_send[2] = 0x12;//正常模式 
        uwb_send[3] = 15+5*(taglist_num);//数据段长度
        memcpy(&uwb_send[4],&dev_id,2);
@@ -407,7 +395,8 @@
        uwb_send[7] = (tagseq++)>>8;
        uwb_send[8] = bat_percent;
        uwb_send[9] = state_flag;
        //memcpy(&usart_send[10],&rec_tagheight,2);
        memcpy(&uwb_send[10],&testlorarecve,2);
        testlorarecve=0;
        uwb_send[12] = 0;
        uwb_send[13] = 0;
        uwb_send[14] = 0;
@@ -420,11 +409,25 @@
        uwbchecksum = Checksum_u16(&uwb_send[2],15+5*taglist_num);
        memcpy(&uwb_send[17+5*taglist_num],&uwbchecksum,2);
}
extern uint16_t testlorarecve;
void Main_Poll()
{
    u16 uwbchecksum;
    IdleTask();
    if(HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_1)) // 设备被拆卸
    HAL_IWDG_Refresh(&hiwdg);
    if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))//5V输入检测
    {   yundong_state=0;
        PowerLedTask();
        DBG_Poll();
        IdleTask();
        Internet_Poll();
        HIDO_TimerPoll();
        HIDO_ATLitePoll();
        UDPClient_Poll();
    }
    else   
    {        
    if(HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_1)) // 设备被拆卸拆卸后每秒发1次XTB，连续发五次。  然后10分钟发送一次定位信息，和XTB,其他时候休眠。
    {
        if(air780_state>=2)
        {   
@@ -434,9 +437,6 @@
        yundong_state=0;
        if(fangchai_state==0||fangchai_state==1)
        {
//            PowerLedTask();
//            DBG_Poll();
//            IdleTask();
            GPS_Poll();
            Internet_Poll();
            HIDO_TimerPoll();
@@ -450,12 +450,11 @@
            if(GPS_successful_flag)
            {
                UDPClient_UploadGPS((char*)GPS_data);
                loraled=GREEN;
//                UDPClient_UploadGPS_flag=1;
            }
            else
            {
                Module_GetLBSLocationAsync(LBSLocationCallback, HIDO_NULL);
                loraled=YELLOW;
            }
        }
        if(fangchai_time>DENGDAI_TIME&&fangchai_state==1)
@@ -480,28 +479,26 @@
        {   
            HAL_NVIC_SystemReset();
        }
        if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))//5V输入检测
        {   yundong_state=0;
            PowerLedTask();
            DBG_Poll();
            IdleTask();
            Internet_Poll();
            HIDO_TimerPoll();
            HIDO_ATLitePoll();
            UDPClient_Poll();
        } 
        else//没有5V输入
        {
            if(nomove_flag)//静止状态
            if(nomove_flag/*&&zuihoufasong_falg*/)//静止状态
            {
                yundong_state=0;
                if(sleep_time>12)
                {
                Stop_Mode_Poll();
                HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
                if(sleep_time>1800)
                {HAL_NVIC_SystemReset();}
                }
                else  
                {                    
                Internet_Poll();
                HIDO_TimerPoll();
                HIDO_ATLitePoll();
                UDPClient_Poll();
                }
            }
            else//运动状态
            {   
                if(yundong_state==0)
                {Radio.Rx(0);}
            else
            {
                yundong_state=1;               
                GPS_Poll();
                Internet_Poll();
@@ -520,64 +517,35 @@
                        air780_state=0;
                        yundong_time=0;
                        Uwb_Zubao_Poll();
                        UDPClient_UploadGPS((char*)GPS_data);
//                        UDPClient_UploadGPS_flag=1;
                        HexToAsciiSendUDP(uwb_send,19+5*taglist_num);
                        loraled=BLUE;
                        taglist_num=0;
                    }
                }
                else
                {
                    if(g_com_map[GPS_HZ]==1)
                    {
//                    if(g_com_map[GPS_HZ]==1)
//                    {
                        if(yundong_time>=g_com_map[GPS_HZ])
                        {
                            yundong_time=0;
                            if(GPS_successful_flag)
                            {
                                UDPClient_UploadGPS((char*)GPS_data);
                                loraled=GREEN;
//                                UDPClient_UploadGPS_flag=1;
                            }
                            else
                            {
                                Module_GetLBSLocationAsync(LBSLocationCallback, HIDO_NULL);
                                loraled=WHITE;
                            }
                        }
                    }
                    else
                    {
                        if(yundong_time>=60&&air780_state==0)
                        {
                            air780_state=1;
                            yundong_time=0;
                            if(GPS_successful_flag)
                            {
                                UDPClient_UploadGPS((char*)GPS_data);
                                loraled=GREEN;
                            }
                            else
                            {
                                Module_GetLBSLocationAsync(LBSLocationCallback, HIDO_NULL);
                                loraled=WHITE;
                            }
                        }
                        if(yundong_time>=30&&air780_state==1)
                        {
                            air780_state=2;
                            yundong_time=0;
                            Stop_Mode_chulelora_Poll();
                        }
                        if(air780_state==2)
                        {
                            HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
                        }
                        if(yundong_time>=g_com_map[GPS_HZ]-60&&air780_state==2)
                        {
                            HAL_NVIC_SystemReset();
                        }
                    }
                }
            }            
        }
            }
        
    }
}
}

//*/
////以上是源代码，被拆除时间接性关闭4G