天津定制

zhyinch

2021-11-03 e939c01afd679c96ef823e7ae940b9cfd5733e8c

 Src/main.c

@@ -132,6 +132,7 @@
   //motor_state=2;
if(g_com_map[MOTOR_ENABLE])
{
    
      if(motor_keeptime>0)
      {
         motor_state = 2;
@@ -183,15 +184,16 @@
         break;   
   }
}
    bat_percent=Get_Battary();
   if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
   {
      nomove_count = 0;
      //nomove_count = 0;
      if(state5v==0)
      {
         state5v=1;
         UsartInit();
      }
      if(bat_percent>99)
      if(HAL_GPIO_ReadPin(PWR_ON_GPIO_Port,PWR_ON_Pin))
      {
         LED_LR_OFF;
         LED_LG_ON;
@@ -254,12 +256,12 @@
uint8_t fix_slotpos =FIXSLOTPOS; 
int32_t lpcount,lptime,target_time;
extern u16 tagslotpos;
void SetNextPollTime(u16 slotpos)
void SetNextPollTime(u16 slotpos) //时间片逻辑：上来默认计算一个时间，时间同步之后，就近选择时间片。SetNextPollTime会调整下次发送
{

#ifdef FIXSLOT
   fix_slotpos =FIXSLOTPOS;
   //fix_slotpos = g_com_map[ALARM_DISTANCE1];
   fix_slotpos = g_com_map[ALARM_DISTANCE2];
   slotpos = fix_slotpos;
   tagslotpos = fix_slotpos;
#endif
@@ -285,8 +287,20 @@
   __HAL_LPTIM_COMPARE_SET(&hlptim1, lpcount);
}
}
void ErrorConfig_Handler(void)
{
      if(g_com_map[COM_INTERVAL]==0||g_com_map[COM_INTERVAL]>1000)
   {
     g_com_map[COM_INTERVAL]=100;
   }
   if(g_com_map[IMU_THRES]>10)
   {g_com_map[IMU_THRES]=2;}
    if(g_com_map[POWER]>MAX_RFPOWER)
      {g_com_map[POWER]=MAX_RFPOWER;}
      if(g_com_map[POWER]<0)
      {g_com_map[POWER]=0;}
}
u8 active_flag=0;

void Program_Init(void)
{   float temp;
   uint16_t temp2;
@@ -297,37 +311,33 @@
   hardware_pici= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
   hardware_type= STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
   //deca_sleep(1000);
   g_com_map[VERSION] = 0x0213;
//   g_com_map[DEV_ID]=0x11;
   g_com_map[VERSION] = 0x0224;
    
   g_com_map[DEV_ID]=0x3496;
   g_com_map[IMU_ENABLE]=0;
#ifdef DEBUG_MODE
//   g_com_map[DEV_ROLE]=1;
      g_com_map[DEV_ID]=0x10;
//   g_com_map[COM_INTERVAL]=100;
//      g_com_map[DEV_ID]=0x4009;
//    g_com_map[ACTIVE_INDEX]=1;
   g_com_map[COM_INTERVAL]=100;
//   g_com_map[MAX_REPORT_ANC_NUM]=1;
//   g_com_map[NOMOVESLEEP_TIME]=10;
         g_com_map[IMU_ENABLE]=0;
   g_com_map[COM_INTERVAL]=50;
//         g_com_map[IMU_ENABLE]=0;
//   g_com_map[COM_INTERVAL]=50;
#endif
//g_com_map[NOMOVESLEEP_TIME]=10;
//   g_com_map[IMU_ENABLE]=0;
//    g_com_map[COM_INTERVAL]=1000;
   active_flag = g_com_map[ACTIVE_INDEX];
   active_flag = 1;
   if(active_flag==0)
   { g_com_map[COM_INTERVAL]=1000;
   {   
        g_com_map[COM_INTERVAL]=1000;
      g_com_map[IMU_ENABLE]=1;
      g_com_map[NOMOVESLEEP_TIME]=10;
      g_com_map[MOTOR_ENABLE]=0;
   }
      if(g_com_map[COM_INTERVAL]==0)
   {
     g_com_map[COM_INTERVAL]=100;
   }
   if(g_com_map[IMU_THRES]>10)
   {g_com_map[IMU_THRES]=2;}
    if(g_com_map[POWER]>MAX_RFPOWER)
      {g_com_map[POWER]=MAX_RFPOWER;}
      if(g_com_map[POWER]<0)
      {g_com_map[POWER]=0;}
g_com_map[HEIGHTOFFEST_INDEX]=g_com_map[MAX_REPORT_ANC_NUM];
   module_power = g_com_map[POWER];
   imu_enable=g_com_map[IMU_ENABLE];
   motor_enable=g_com_map[MOTOR_ENABLE];
@@ -376,19 +386,22 @@
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
//hardware_type=2;
if(hardware_type == 0)
    hardware_type = 1;
   switch(hardware_type)
      {case 1:
      {
        case 1:
     
       HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
  GPIO_InitStruct.Pin = MOTOR_Pin;
  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
            HAL_GPIO_WritePin(GPIOB, MOTOR_Pin, GPIO_PIN_SET);
            GPIO_InitStruct.Pin = MOTOR_Pin;
            GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
            GPIO_InitStruct.Pull = GPIO_NOPULL;
            GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
            HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
         break;
      case 2:
         MX_TIM2_Init();
      BarInit();
            BarInit();
         break;
      }
}
@@ -427,26 +440,28 @@
  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_LPTIM1_Init();
  MX_DMA_Init();
  MX_USART1_UART_Init();
  MX_SPI1_Init();
  MX_ADC_Init();
  MX_DMA_Init();
  //MX_TIM2_Init();
  /* USER CODE BEGIN 2 */
   LED_LG_ON;
   Program_Init();
   LIS3DH_Data_Init();   
 //   BarInit();
   Dw1000_Init();
   Dw1000_App_Init();
   HardWareTypeDiffConfig();
   dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
   //dwt_entersleep();
   dwt_entersleep();
   waitusart_timer=tag_frequency*USART_KEEPWAKE_TIME;;
   DW_DISABLE;
    if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
   {
    Error_Handler();
   }
    
//   HAL_Delay(2000);
//   mcu_sleep();
   //LED0_BLINK;      
@@ -469,7 +484,7 @@
   { static uint16_t blink_count=0;
      SystemClock_Config();
      g_start_send_flag = 0;   
      GetPressAndTemp();
   //   GetPressAndTemp();
//      if(current_count>slot_startcount&&current_count<slot_startcount+interval_count)
//      {
//      HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_SET);
@@ -477,8 +492,6 @@
//      HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);
//      }
//      LED_TR_BLINK;
		
         bat_percent=Get_Battary();
      if(bat_percent>15)
      {   LED_TB_ON;
         Tag_App();
@@ -948,20 +961,23 @@
{
   static uint8_t i=0;
   i++;
      
   g_start_send_flag=1;
   current_slotnum++;
   SetNextPollTime(tagslotpos);
   nomove_count+=(float)g_com_map[COM_INTERVAL]/1000;
   nomove_count+=1/(float)tag_frequency;
   if(motor_keeptime>0)
   {   
   motor_keeptime-=(float)g_com_map[COM_INTERVAL]/1000;
   motor_keeptime-=1/(float)tag_frequency;
   }
    if(motor_keeptime<0)
    {motor_keeptime = 0;}
   if(active_flag==0)
   {
   if(!GET_USERKEY)
   {
      LED_LG_ON;
         key_keeptime+=(float)g_com_map[COM_INTERVAL]/1000;
         key_keeptime+=1/(float)tag_frequency;
      if(key_keeptime>3)
      {
         u8 i=250,keystate=1;
@@ -993,15 +1009,15 @@

   if(!GET_USERKEY)
   {
      key_keeptime+=(float)g_com_map[COM_INTERVAL]/1000;
      key_keeptime+=1/(float)tag_frequency;
      if(key_keeptime>=KEY_KEEPRESET_TIME)
      {
         SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; 
      //   SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; 
      }
   }else{
      key_keeptime=0;
   }
   if(nomove_count>STATIONARY_TIME)
   if(nomove_count>g_com_map[STATIONARY_TIME])
   {
      stationary_flag = 1;
   }else{
@@ -1013,10 +1029,12 @@
   }else{
      gotosleep_flag=0;
   }
#ifndef DEBUG_MODE    
   if(nomove_count>g_com_map[NOMOVESLEEP_TIME]&&imu_enable)
   {
      mcu_sleep();
   }
#endif
}
/* USER CODE END 4 */

@@ -1028,12 +1046,12 @@
{
  /* USER CODE BEGIN Error_Handler_Debug */
  /* User can add his own implementation to report the HAL error return state */
  while (1)
  {
    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
      SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
    /* USER CODE END W1_HardFault_IRQn 0 */
  }
//  while (1)
//  {}
//    /* USER CODE BEGIN W1_HardFault_IRQn 0 */
//      //SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
//    /* USER CODE END W1_HardFault_IRQn 0 */
//  }
  /* USER CODE END Error_Handler_Debug */
}