1.25，修改看门狗喂狗时间。加入休眠后加速度计唤醒会直接重启

WXK

2025-01-15 f0e236adc153a6d06874704ec6ba39a22af05ff6

 Src/main.c

@@ -86,10 +86,10 @@
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
static void MX_GPIO_Init(void);
static void MX_USART1_UART_Init(void);
static void MX_DMA_Init(void);
static void MX_SPI1_Init(void);
static void MX_ADC_Init(void);
static void MX_DMA_Init(void);
static void MX_USART1_UART_Init(void);
static void MX_IWDG_Init(void);
static void MX_TIM2_Init(void);
static void MX_LPUART1_UART_Init(void);
@@ -100,11 +100,11 @@

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
void LedTask(void);
uint32_t dev_id;
uint16_t heartbeat_timer,poll_timer,sync_timer;
uint8_t aRxBuffer[1],group_id;
uint8_t bat_percent=0,g_start_send_flag;
extern u8 motor_state;
uint16_t tyncpoll_time,lpsettime;
uint16_t slottime,max_slotpos;
uint16_t lastpoll_count,interval_count,slot_startcount,tag_frequency,lastpoll_time;
@@ -158,9 +158,10 @@
uint8_t state5v = 1;
extern uint8_t du_flag;
extern uint8_t xie_flag;
float motor_keeptime;
uint16_t motor_keeptime;
void IdleTask(void)
{

    if(HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
    {
        UART_CheckReceive();
@@ -172,15 +173,17 @@
            state5v=1;
            UsartInit();
        }
        HAL_IWDG_Refresh(&hiwdg);
        if(bat_percent>99)
        {
            LED2_TR_OFF;
            LED2_TB_ON;
            LED_TR_OFF;
            LED_TB_ON;
        } else {
            LED2_TR_ON;
            LED2_TB_OFF;
            LED_TR_ON;
            LED_TB_OFF;
        }
    } else {
        HAL_IWDG_Refresh(&hiwdg);
        if(state5v==1)
        {
            state5v=0;
@@ -194,44 +197,13 @@
    {
        SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
    }
    if(memcmp(g_com_map2,g_com_map,100)!=0)
     {
        SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
     }

}



/* 返回ch字符在sign数组中的序号 */
int getIndexOfSigns(char ch)
{
    if(ch >= '0' && ch <= '9')
    {
        return ch - '0';
    }
    if(ch >= 'A' && ch <='F')
    {
        return ch - 'A' + 10;
    }
    if(ch >= 'a' && ch <= 'f')
    {
        return ch - 'a' + 10;
    }
    return -1;
}
/* 十六进制数转换为十进制数 */
long hexToDec(char *source)
{
    long sum = 0;
    long t = 1;
    int i, len;

    len = strlen(source);
    for(i=len-1; i>=0; i--)
    {
        sum += t * getIndexOfSigns(*(source + i));
        t *= 16;
    }

    return sum;
}

//u32 Loratx_frequency;
u8 active_flag,nomovesleeptime;
@@ -247,17 +219,20 @@
    hardware_pici = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+2);
    hardware_type = STMFLASH_ReadHalfWord(FLASH_HARDWARE_VERSION_MAP+4);
    //deca_sleep(1000);
    g_com_map[VERSION] = (1<<8)|3;
    g_com_map[VERSION] = (1<<8)|25;
//    g_com_map[DEV_ID]=1158;
    g_com_map[GROUP_ID]=0;
    g_com_map[GROUP_ID]=3;
//    g_com_map[COM_INTERVAL] = 1000;
    if(g_com_map[COM_INTERVAL]<1000)
    {
        g_com_map[COM_INTERVAL] = 1000;
    }
    g_com_map[STATIONARY_TIME] = 10;
    g_com_map[LORA_POWER] = 22;
    g_com_map[POWER] = 67;
    active_flag = g_com_map[ACTIVE_INDEX];
    module_power = g_com_map[POWER];
    g_com_map[IMU_ENABLE] = 0;
//    g_com_map[IMU_ENABLE] = 0;
    imu_enable=g_com_map[IMU_ENABLE];
    motor_enable=g_com_map[MOTOR_ENABLE];

@@ -291,7 +266,7 @@
        module_power=0;
    }


    g_com_map[MAP_SIGN_INDEX] =0x55AA;
    memcpy(g_com_map2,g_com_map,COM_MAP_SIZE);
}

@@ -349,9 +324,20 @@
    HAL_ADC_DeInit(&hadc);
    HAL_ADCEx_DisableVREFINT();
}
uint8_t anjian_num;
uint16_t irq_num;
uint16_t irq_num1;
uint8_t uwb_work_flag;
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
    if(GPIO_Pin == GPIO_PIN_11)
    {
        SystemClock_Config();
      uwb_work_flag=1;
        irq_num1++;
        MbxTagUwbRec();
    }
    
    if(GPIO_Pin == GPIO_PIN_3)
    {
        SystemClock_Config();
@@ -362,10 +348,24 @@
    {
        SystemClock_Config();
        anjian_flag=1;
//        anjian_num++;
//        if(anjian_num==2)
//        {                        
//            g_com_map[LORA_SEND_INDEX] = !g_com_map[LORA_SEND_INDEX];
//            save_com_map_to_flash();
//            LED_TB_ON;
//            LED_TR_ON;
//            LED2_TB_ON;
//            LED2_TR_ON;
//            delay_ms(100);
//            SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
//        }
    }
    if(GPIO_Pin == GPIO_PIN_0)//加速度
    {
        SystemClock_Config();
        if(sleep_flag)
        {HAL_NVIC_SystemReset();}
        stationary_flag =0;
        stationary_num=0;
    }
@@ -443,13 +443,32 @@
}

uint8_t usart5_state,flag_onesecond;
uint8_t beep_flag;
void BeepTask(void)
{
    if(1)//g_com_map[MOTOR_ENABLE])
    {
        if(motor_keeptime>0)
        {
            motor_keeptime--;
            HAL_TIM_PWM_Start(&htim2, TIM_CHANNEL_4);
            beep_flag=1;
        }else{
            HAL_TIM_PWM_Stop(&htim2, TIM_CHANNEL_4);
            beep_flag=0;
        }       
    }
}
void OneSecondTask(void)
{
    if(flag_onesecond==1)
    {
        flag_onesecond = 0;
        BeepTask();
    }
}
uint8_t uwb_kaiguanrx_falg;
extern uint8_t uwbrxflag;
/* USER CODE END 0 */

/**
@@ -480,10 +499,10 @@

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_USART1_UART_Init();
//  MX_DMA_Init();
  MX_SPI1_Init();
  MX_ADC_Init();
 // MX_DMA_Init();
  MX_USART1_UART_Init();
  MX_IWDG_Init();
  MX_TIM2_Init();
  MX_LPUART1_UART_Init();
@@ -495,7 +514,7 @@
    Dw1000_Init();
    Delay_Ms(10);
    dwt_configuresleep(DWT_PRESRV_SLEEP | DWT_CONFIG, DWT_WAKE_CS | DWT_WAKE_WK| DWT_SLP_EN);
    dwt_entersleep();
//    dwt_entersleep();
    if(HAL_UART_Receive_DMA(&huart1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE))
    {
        Error_Handler();
@@ -507,7 +526,9 @@
    HAL_UART_Receive_IT(&hlpuart1, (uint8_t *)GPSRxBuffer, 1);
    HAL_GPIO_WritePin(GPIOA, GPIO_PIN_2, GPIO_PIN_SET); //开GPS电源
    LoraInit();
#ifdef _USE_BAR
    BarInit();
#endif
//    Delay_Ms(1000);
//    HAL_UART_Transmit(&hlpuart1,Close_RMC,22,1000);
//    HAL_UART_Transmit(&hlpuart1,Close_GSA,22,1000);
@@ -528,12 +549,34 @@

    /* USER CODE BEGIN 3 */
//    HAL_IWDG_Refresh(&hiwdg);
//        if(uwb_work_flag)
//        {
//        uwb_work_flag=0;    
//        MbxTagUwbRec();
//        }
        if(uwb_kaiguanrx_falg==1)
        {
            uwb_kaiguanrx_falg=0;
        UWB_RXON();
        }
        if(uwb_kaiguanrx_falg==2)
        {
            uwb_kaiguanrx_falg=0;
        UWB_RXOFF();
        }
        OneSecondTask();
        IdleTask();

//        if(g_com_map[LORA_SEND_INDEX])
//        {
        Lora_Send_Poll();
//        }
        LoraUp_Poll();
#ifndef DEBUG_MODE
if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))				
                    HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);  
        if(beep_flag==0&&uwbrxflag!=1)
        {
        if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin)&&motor_keeptime==0)
            HAL_PWR_EnterSTOPMode(PWR_LOWPOWERREGULATOR_ON, PWR_STOPENTRY_WFI);
        }
#endif

    }
@@ -868,7 +911,7 @@
    Error_Handler();
  }
  sConfigOC.OCMode = TIM_OCMODE_PWM1;
  sConfigOC.Pulse = 0;
  sConfigOC.Pulse = 125;
  sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
  sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
  if (HAL_TIM_PWM_ConfigChannel(&htim2, &sConfigOC, TIM_CHANNEL_4) != HAL_OK)
@@ -926,8 +969,8 @@
  HAL_GPIO_WritePin(GPIOB, LED1_G_Pin|LED1_R_Pin|GPIO_PIN_14|RADIO_nRESET_Pin
                          |RADIO_NSS_Pin|GPIO_PIN_7, GPIO_PIN_RESET);

  /*Configure GPIO pins : PA0 PA15 */
  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_15;
  /*Configure GPIO pins : PA0 PA11 PA15 */
  GPIO_InitStruct.Pin = GPIO_PIN_0|GPIO_PIN_11|GPIO_PIN_15;
  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
  GPIO_InitStruct.Pull = GPIO_NOPULL;
  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
@@ -1000,6 +1043,9 @@
  HAL_NVIC_SetPriority(EXTI2_3_IRQn, 1, 0);
  HAL_NVIC_EnableIRQ(EXTI2_3_IRQn);

  HAL_NVIC_SetPriority(EXTI4_15_IRQn, 1, 0);
  HAL_NVIC_EnableIRQ(EXTI4_15_IRQn);

}

/* USER CODE BEGIN 4 */
@@ -1027,54 +1073,134 @@
    /*Enter the Standby mode*/
    HAL_PWR_EnterSTANDBYMode();
}

extern uint8_t tx_near_msg[80];
float key_keeptime;
extern float freqlost_count,range_lost_time;
extern uint8_t lora_yingda_flag;
extern uint32_t wg_lost_count;
uint8_t lora_yingdatime;
uint8_t lora_yingdatime,gotosleep_flag,sleep_flag;
extern uint8_t lora_chongfuyingda_flag,report_ancnum;
uint16_t no_data_chongqi_num;
uint16_t anchor_send_num;
uint8_t no_yingdatime;
void LedTask(void)
{
    if(report_ancnum>0)
    {
        LED2_TB_ON;
    }
   // if(wg_lost_count<=1)
    {
        LED_TB_ON;
    }
    if(!HAL_GPIO_ReadPin(INPUT_5V_GPIO_Port,INPUT_5V_Pin))
        if(bat_percent<15)
        {
            LED_TR_ON;
        }
    
}
uint8_t no_yingdatime,tflag1,tflag2;
extern uint16_t tagdist_list[ANC_MAX_NUM];
extern uint8_t Lora_send_flag;
uint8_t Lora_send_time;
extern u8 lora_jianting_flag;
void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim)
{
//    uint8_t pinlv;
    SystemClock_Config();
    LedTask();
    LoraReportPoll();
    flag_onesecond = 1;
       if(!GET_USERKEY)
   {
      key_keeptime+=1/(float)tag_frequency;
      if(key_keeptime>=KEY_KEEPRESET_TIME)
      {
         SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; 
      }
   }else{
      key_keeptime=0;
   }
    LED_TB_OFF;
    LED_TR_OFF;
    LED2_TB_OFF;
    LED2_TR_OFF;
//    HAL_IWDG_Refresh(&hiwdg);
    anjian_num=0;
    if(active_flag==0)  //未激活状态
    {
        if(!GET_USERKEY)
        {
            LED_TB_ON;
            key_keeptime+=1;
            if(key_keeptime>3)
            {
                u8 i=250,keystate=1;
                while(i--)
                {
                    if(i%10==0)
                    {
                        LED_TB_BLINK;
                    }
                    if(GET_USERKEY)
                    {
                        keystate = 0;
                    }
                    if(keystate==0&&!GET_USERKEY)
                    {
                        parameter_init();
                        g_com_map[ACTIVE_INDEX] = 1;
                        save_com_map_to_flash();
                        delay_ms(100);
                        SCB->AIRCR = 0X05FA0000|(unsigned int)0x04; //软复位回到bootloader
                    }
                    delay_ms(10);
                }
            }
        } else {
            //   LED_LG_OFF;
            key_keeptime=0;
        }

    } else {
        if(!sleep_flag)
        {
            Lora_send_time++;
            flag_onesecond = 1;
            if(lora_jianting_flag)
            {
            if(Lora_send_time%3==1)
            {
//            UWB_RXON();
                uwb_kaiguanrx_falg=1;
            }
            if(Lora_send_time%3==2)
            {
//            UWB_RXOFF();
                uwb_kaiguanrx_falg=2;
            }
            }
            else
            {
                uwb_kaiguanrx_falg=0;
                UWB_RXOFF();
            }
            if(Lora_send_time%3==0)
            {
            Lora_send_flag=1;
            }
            
#ifndef DEBUG_MODE
            if(nomove_count>g_com_map[NOMOVESLEEP_TIME]&&imu_enable&&motor_keeptime==0)
            {
                if(sleep_flag==0)
                {
                    Radio.Standby();
                    Radio.Sleep();
                    sleep_flag = 1;
                    LedOff_task();
                    UWB_RXOFF();
                    uwb_kaiguanrx_falg=0;
                    uwbrxflag=0;
                }
            } 
#endif
            if(nomove_count++>g_com_map[STATIONARY_TIME])
            {
                stationary_flag = 1;
            } else {
                stationary_flag = 0;
            }
            if(nomove_count>=g_com_map[NOMOVESLEEP_TIME]-1&&imu_enable)
            {
                gotosleep_flag=1;
            } else {
                gotosleep_flag=0;
            }
        }else{    
            if(nomove_count<g_com_map[NOMOVESLEEP_TIME])
            {
                SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
            }
        }
    }
    if(!GET_USERKEY)    //长按重启逻辑
    {
        key_keeptime+=1;
        if(key_keeptime>=KEY_KEEPRESET_TIME)
        {
            SCB->AIRCR = 0X05FA0000|(unsigned int)0x04;
        }
    } else {
        key_keeptime=0;
    }
}
/* USER CODE END 4 */