开发完成，版本V1.0

WXK

2024-10-21 f152f0dd5cb4aaf867b8976e357291001bb2eebe

 Src/application/dw_app.c

@@ -29,7 +29,9 @@
#include <stdio.h>
#include "beep.h"
#include "modbus.h"

#include "CRC.h"
#include "dw_mbx_anc.h"
#include "ADC.h"
//#define USART_INTEGRATE_OUTPUT
/*------------------------------------ Marcos ------------------------------------------*/
/* Inter-ranging delay period, in milliseconds. */
@@ -70,15 +72,14 @@
#define FINAL_MSG_FINAL_TX_TS_IDX 18
#define FINAL_MSG_TS_LEN 4

//#define _UWB_4G

enum enumtagstate
{
   DISCPOLL,
   GETNEARMSG,
   NEARPOLL,
}tag_state=NEARPOLL;
static dwt_config_t config = {
   5,               /* Channel number. */
dwt_config_t config = {
#ifdef _UWB_4G
   2,               /* Channel number. */
#else
    5,
#endif
   DWT_PRF_64M,     /* Pulse repetition frequency. */
   DWT_PLEN_128,    /* Preamble length. */
   DWT_PAC8,        /* Preamble acquisition chunk size. Used in RX only. */
@@ -104,7 +105,6 @@
static uint64_t poll_rx_ts;
static uint64_t resp_tx_ts;
static uint64_t final_rx_ts;
static double tof;
int32_t anchor_dist_last_frm[TAG_NUM_IN_SYS],his_dist[TAG_NUM_IN_SYS];   ;   
uint32_t tag_id = 0;
uint32_t tag_id_recv = 0;
@@ -114,7 +114,7 @@
uint32_t g_UWB_com_interval = 0; 
float dis_after_filter;            //当前距离值
LPFilter_Frac* p_Dis_Filter;      //测距用的低通滤波器

float range_lost_time = 0;


static uint64_t get_tx_timestamp_u64(void)
@@ -183,10 +183,6 @@
    /* Apply default antenna delay value. See NOTE 1 below. */
    dwt_setrxantennadelay(RX_ANT_DLY);      //设置接收天线延迟
    dwt_settxantennadelay(TX_ANT_DLY);      //设置发射天线延迟

    /* Set expected response's delay and timeout. See NOTE 4 and 5 below.
     * As this example only handles one incoming frame with always the same delay and timeout, those values can be set here once for all. */
            //设置接收超时时间
}
void Dw1000_App_Init(void)
{
@@ -223,429 +219,172 @@
   dwt_configuresleep(0x940, 0x7);
   dwt_entersleep();
}
extern uint8_t g_start_send_flag;

uint16_t g_Resttimer;
uint8_t result;
u8 tag_succ_times=0;
int32_t hex_dist;
u16 checksum;
int8_t tag_delaytime;
extern uint16_t sync_timer;
u16 tmp_time;
int32_t temp_dist;
u16 tagslotpos;
float freqlost_count = 0;

u16 anclist_num=0,anclist_pos; //list 总数量和当前位置
u16 ancid_list[TAG_NUM_IN_SYS];
u8 nearbase_num;
u16 mainbase_id;
int32_t mainbase_dist;
uint8_t trygetnearmsg_times;
u16 nearbaseid_list[MAX_NEARBASE_NUM],mainbase_id,true_nearbase_idlist[MAX_NEARBASE_NUM];
u8 FindNearBasePos(u16 baseid)
{
   u8 i;
   for(i=0;i<nearbase_num;i++)
   {
      if(baseid==nearbaseid_list[i])
         return i;
   }
}
u8 recbase_num=0;
#define CHANGE_BASE_THRESHOLD  5
uint8_t GetRandomValue(void)
{
   uint8_t random_value=0,temp_adc,i;
   for(i=0;i<8;i++)
   {
      temp_adc=Get_ADC_Value();
      random_value=random_value|((temp_adc&0x01)<<i);
   }
   return random_value;
}
u8 GetRandomSlotPos(uint32_t emptyslot)
{
   u8 i,temp_value;
   temp_value = HAL_LPTIM_ReadCounter(&hlptim1);//GetRandomValue();
   for(i=temp_value%32;i<max_slotpos;i++)
   {
      if(((emptyslot>>i)&0x1)==0)
      {
         return i;
      }
   }
	
      for(i=1;i<max_slotpos;i++)
   {
      if(((emptyslot>>i)&0x1)==0)
      {
         return i;
      }
   }
return max_slotpos-1;
}

int32_t mainbase_dist,nearbase_distlist[MAX_NEARBASE_NUM],true_nearbase_distlist[MAX_NEARBASE_NUM],true_exsistbase_list[MAX_NEARBASE_NUM],ancsync_time,nextpoll_delaytime,offsettimeus;
u8 anclost_times=0 , mainbase_lost_count=0;
u8 exsistbase_list[MAX_NEARBASE_NUM],report_num,get_newbase=0;
u8 flag_finalsend,flag_getresponse,flag_rxon;
uint16_t current_count,start_count,end_count,lastsync_timer;

u8 nearbase_num=0,last_nearbase_num,next_nearbase_num,last_slotnum, para_update,para_len,stationary_flag=0;
u32 rec_tagpos_binary;
int16_t offset=2700;
u8 motor_state,rec_remotepara_state,rec_remotepara[80];
extern u16 last_lpcount;
void NearPoll(void)
{
	
   uint32_t temp1,temp2,dw_systime;
   uint32_t frame_len;
   uint32_t final_tx_time;
   u32 start_poll;
   u8 i,j,getsync_flag=0,timeout;
    dwt_setrxaftertxdelay(POLL_TX_TO_RESP_RX_DLY_UUS);         //设置发送后开启接收，并设定延迟时间
    dwt_setrxtimeout(10000);		
   tag_succ_times = 0;
      //GPIO_WriteBit(GPIOA, GPIO_Pin_10, Bit_SET);
   if(next_nearbase_num>=MAX_NEARBASE_NUM)
   {
      next_nearbase_num = MAX_NEARBASE_NUM-1;
   }
   HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_SET);
   last_nearbase_num=next_nearbase_num;
   nearbase_num=next_nearbase_num;
   recbase_num=0;
//   motor_state=0;
   tx_near_msg[GROUP_ID_IDX] = group_id;
   tx_near_msg[BATTARY_IDX] = bat_percent;
   tx_near_msg[BUTTON_IDX] = !GET_USERKEY|stationary_flag<<1;
   tx_near_msg[SEQUENCE_IDX] = frame_seq_nb++;
   tx_near_msg[NEARBASENUM_INDEX] = nearbase_num;
   memcpy(&tx_near_msg[NEARBASEID_INDEX],&nearbaseid_list,nearbase_num*2);
   tx_near_msg[MESSAGE_TYPE_IDX] = NEAR_POLL;	
   memcpy(&tx_near_msg[ANCHOR_ID_IDX],&mainbase_id,2);	
   dwt_writetxdata(13+2*nearbase_num, tx_near_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
   dwt_writetxfctrl(13+2*nearbase_num, 0);//设置超宽带发送数据长度
   dwt_starttx(DWT_START_TX_IMMEDIATE | DWT_RESPONSE_EXPECTED);//开启发送，发送完成后等待一段时间开启接收，等待时间在dwt_setrxaftertxdelay中设置
	
   tx_near_msg[TAGCONFIGSUCCESS_INDEX] =0;
   para_update = 0;
   flag_finalsend=0;
   flag_rxon=1;
   flag_getresponse=0;
   start_count=HAL_LPTIM_ReadCounter(&hlptim1);
   recbase_num=0;
   timeout=nearbase_num*SLOT_SCALE+4;
   end_count=start_count+(timeout<<5);
   if(end_count>=32768)
   {end_count-=32768;}
   mainbase_dist=100000;
   mainbase_lost_count++;
   current_count=HAL_LPTIM_ReadCounter(&hlptim1);
         while(current_count<end_count||current_count>end_count+15000)
         {
            current_count=HAL_LPTIM_ReadCounter(&hlptim1);
               while (!((status_reg = dwt_read32bitreg(SYS_STATUS_ID)) & (SYS_STATUS_RXFCG | SYS_STATUS_ALL_RX_ERR)))//不断查询芯片状态直到成功接收或者发生错误
               {
                  if(flag_finalsend)
                  {
                     dw_systime=dwt_readsystimestamphi32();
                     if(dw_systime>temp1&&dw_systime<temp2)
                     {
								
                        dwt_forcetrxoff();
                        flag_rxon=0;
                        dwt_setdelayedtrxtime(final_tx_time);
                        result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送	
                        flag_finalsend=0;
                        break;
                     }
                  }
                     current_count=HAL_LPTIM_ReadCounter(&hlptim1);
                   if(current_count>=end_count&&current_count<end_count+15000)
                        break;
               };
               if(status_reg==0xffffffff)
               {
                  NVIC_SystemReset();
               }
               if (status_reg & SYS_STATUS_RXFCG)//如果成功接收
                  {
                     dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_RXFCG | SYS_STATUS_TXFRS);//清楚寄存器标志位
                     frame_len = dwt_read32bitreg(RX_FINFO_ID) & RX_FINFO_RXFLEN_MASK;   //获得接收到的数据长度
                     dwt_readrxdata(rx_buffer, frame_len, 0);   //读取接收数据
                     dwt_setrxtimeout(0);//DELAY_BETWEEN_TWO_FRAME_UUS*(nearbase_num+1-recbase_num)+10);//设定接收超时时间，0位没有超时时间
                     dwt_rxenable(0);//打开接收
                     if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_RESPONSE&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)&&rx_buffer[GROUP_ID_IDX]==group_id) //判断接收到的数据是否是response数据
                     {   u16 rec_nearbaseid,rec_nearbasepos;
                        poll_tx_ts = get_tx_timestamp_u64();                              //获得POLL发送时间T1
                        resp_rx_ts = get_rx_timestamp_u64();                              //获得RESPONSE接收时间T4	
                        recbase_num++;
                        memcpy(&rec_nearbaseid,&rx_buffer[ANCHOR_ID_IDX],2);
                        if(last_nearbase_num==0)
                        {
                           get_newbase=1;
                           nearbaseid_list[0]=rec_nearbaseid;
                           nearbase_num=1;
                           memcpy(&tx_near_msg[ANCHOR_ID_IDX],&rec_nearbaseid,2);
                        }
                        if(rec_nearbaseid==nearbaseid_list[0])
                        {
                           //////////////////////////////////时间同步
                           memcpy(&sync_timer,&rx_buffer[ANCTIMEMS],2);
                           memcpy(&tmp_time,&rx_buffer[ANCTIMEUS],2);
                           current_count=HAL_LPTIM_ReadCounter(&hlptim1);
//                           memcpy(&tagslotpos,&rx_buffer[TAGSLOTPOS],2);		
                           tmp_time=tmp_time+450;
                           if(tmp_time>999)
                           {
                              tmp_time-=999;
                              sync_timer++;
                              if(sync_timer>=1010)
                                 {sync_timer=0;}
                           }
                        //   TIM3->CNT=tmp_time;
//                           if(tagslotpos>max_slotpos)
//                              tagslotpos=tagslotpos%(max_slotpos+1);
//                              tyncpoll_time=(tagslotpos-1)*slottime;
                           ////////////////////////////
                           rec_nearbasepos=0;
                           exsistbase_list[rec_nearbasepos]=KEEP_TIMES;
                           memcpy(&temp_dist,&rx_buffer[DIST_IDX],4);
                           nearbase_distlist[rec_nearbasepos]=temp_dist;
                           if((rx_buffer[MOTORSTATE_INDEX]&0xf)!=3)
                              motor_state=rx_buffer[MOTORSTATE_INDEX]&0xf;
                           rec_remotepara_state=rx_buffer[MOTORSTATE_INDEX]>>4;
									
                           mainbase_lost_count=0;
                           flag_finalsend=1;
                           memcpy(&mainbase_dist,&rx_buffer[DIST_IDX],4);
                           final_tx_time = (resp_rx_ts + ((RESP_RX_TO_FINAL_TX_DLY_UUS+DELAY_BETWEEN_TWO_FRAME_UUS*nearbase_num+500) * UUS_TO_DWT_TIME)) >> 8;
                           temp1=final_tx_time-((850*UUS_TO_DWT_TIME)>>8);
                           temp2=final_tx_time+((100*UUS_TO_DWT_TIME)>>8);
                        //   dwt_setdelayedtrxtime(final_tx_time);//设置final包发送时间T5
                           final_tx_ts = (((uint64_t)(final_tx_time & 0xFFFFFFFE)) << 8) + TX_ANT_DLY;//final包实际发送时间是计算时间加上发送天线delay
                           final_msg_set_ts(&tx_near_msg[FINAL_MSG_POLL_TX_TS_IDX], poll_tx_ts);//将T1，T4，T5写入发送数据
                           final_msg_set_ts(&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX], resp_rx_ts);
                           final_msg_set_ts(&tx_near_msg[FINAL_MSG_FINAL_TX_TS_IDX], final_tx_ts);
                           tx_near_msg[MESSAGE_TYPE_IDX]=NEAR_FINAL;
                                    tx_near_msg[GROUP_ID_IDX] = group_id;
									
                           dwt_writetxdata(28+nearbase_num*4, tx_near_msg, 0);//将发送数据写入DW1000
                           dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
                           flag_getresponse=1;
                           memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
									
								
                           //时间同步
                           ancsync_time=((sync_timer)*1000+tmp_time);	
                           last_slotnum=current_slotnum;
                           current_slotnum=((float)sync_timer/g_com_map[COM_INTERVAL])+1;
                           if(current_slotnum==last_slotnum-1)
                           {flag_getresponse=1;}
                           lastsync_timer=sync_timer;
                           offsettimeus=ancsync_time-current_count*LPTIMER_LSB+offset;
//                           SetNextPollTime(tyncpoll_time);
//                           if(rec_remotepara_state==1)
//                           {
//                                      memcpy(rec_remotepara,&rx_buffer[REMOTEPARA_INDEX],REMOTEPARA_LEN);
//                              memcpy(&g_com_map[COM_INTERVAL],&rec_remotepara[0],8);
//                              memcpy(&g_com_map[POWER],&rec_remotepara[8],10);
//                                        if(g_com_map[COM_INTERVAL]>0&&g_com_map[COM_INTERVAL]<1000&&g_com_map[POWER]<67&&g_com_map[POWER]>0)
//                              {save_com_map_to_flash();
//                              delay_ms(100);										
//                                        }
//                                        NVIC_SystemReset();
//                           } 
                        }else{
                           rec_nearbasepos=FindNearBasePos(rec_nearbaseid);
									
                              if(rec_nearbasepos>=last_nearbase_num)          //发现新的基站
                           {
                              get_newbase=1;
                              nearbase_num++;
                              nearbaseid_list[rec_nearbasepos] = rec_nearbaseid;
                              memcpy(&tx_near_msg[ANCHOR_ID_IDX],&rec_nearbaseid,2);
                           }
									
                           exsistbase_list[rec_nearbasepos]=KEEP_TIMES;
                           memcpy(&temp_dist,&rx_buffer[DIST_IDX],4);
                           nearbase_distlist[rec_nearbasepos]=temp_dist;
									
                           if(motor_state<(rx_buffer[MOTORSTATE_INDEX]&0xf)&&(rx_buffer[MOTORSTATE_INDEX]&0xf)!=3)
                           {
                                 motor_state=rx_buffer[MOTORSTATE_INDEX];
                           }
                           final_msg_set_ts(&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos)*4], resp_rx_ts);								
                           dwt_writetxdata(28+nearbase_num*4, tx_near_msg, 0);//将发送数据写入DW1000
                           dwt_writetxfctrl(28+nearbase_num*4, 0);//设定发送数据长度
								

                           //dwt_setdelayedtrxtime(final_tx_time);//设置final包发送时间T5
                        //   result=dwt_starttx(DWT_START_TX_DELAYED);//设定为延迟发送			
                           //dwt_writetxdata(4,&tx_near_msg[FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos+1)*4], FINAL_MSG_RESP_RX_NEARBASE_IDX+(rec_nearbasepos+1)*4);//将发送数据写入DW1000
                        }								
                     }
                  }else{
                  dwt_write32bitreg(SYS_STATUS_ID,SYS_STATUS_RXFCG| SYS_STATUS_ALL_RX_ERR);
                  if(flag_rxon)
                     {dwt_rxenable(0);	
                     }								
                  }			
               //   dwt_write32bitreg(SYS_STATUS_ID,SYS_STATUS_RXFCG| SYS_STATUS_ALL_RX_ERR);
         }
         if(mainbase_lost_count>tag_frequency*BASELOST_STOPMOTOR_TIME)
         {motor_state=0; }
            dwt_write32bitreg(SYS_STATUS_ID,SYS_STATUS_RXFCG| SYS_STATUS_ALL_RX_ERR);
            nearbase_num=recbase_num;
      //   tyncpoll_time=0;
         next_nearbase_num=0;
         for(i=0;i<last_nearbase_num+get_newbase;i++)
         {
            if(exsistbase_list[i]>0)
            {		
               next_nearbase_num++;
               true_exsistbase_list[j]=exsistbase_list[i];
               true_nearbase_idlist[j]=nearbaseid_list[i];			
               true_nearbase_distlist[j++]=nearbase_distlist[i];
               exsistbase_list[i]--;
            }
         }
            if(mainbase_lost_count>1&&exsistbase_list[0] != 0)
         {
                last_lpcount+= HAL_LPTIM_ReadCounter(&hlptim1)%(g_com_map[COM_INTERVAL]*16);
         }
            last_nearbase_num = next_nearbase_num;
         for(i=0;i<last_nearbase_num-1;i++)
         {
            for(j=0;j<last_nearbase_num-1;j++)
            {
               if(true_nearbase_distlist[j]>true_nearbase_distlist[j+1])
               {
                  u32 temp_dist,temp_id,temp_exsis;
                  temp_dist=true_nearbase_distlist[j];
                  temp_id = true_nearbase_idlist[j];
                  temp_exsis=true_exsistbase_list[i];
                  true_nearbase_distlist[j]=true_nearbase_distlist[j+1];
                  true_nearbase_idlist[j]=true_nearbase_idlist[j+1];
                  true_exsistbase_list[j]=true_exsistbase_list[j+1];
						
                  true_nearbase_distlist[j+1]=temp_dist;
                  true_nearbase_idlist[j+1]=temp_id;
                  true_exsistbase_list[j+1]=temp_exsis;
               }			
            }
         }
			
         report_num=0;
   for (i=0;i<last_nearbase_num;i++)
         {
            nearbaseid_list[i]=true_nearbase_idlist[i];
            nearbase_distlist[i]=true_nearbase_distlist[i];
            if(nearbase_distlist[i]!=0x1ffff&&true_exsistbase_list[i]==KEEP_TIMES)
            {
               memcpy(&usart_send[4+6*report_num],&nearbaseid_list[i],2);
               memcpy(&usart_send[6+6*report_num],&nearbase_distlist[i],4);
               report_num++;
            }
         }
            #ifdef USART_INTEGRATE_OUTPUT	
                usart_send[0] = 0x55;     
                usart_send[1] = 0xAA;              
            usart_send[2] = 4;//正常模式
            usart_send[3] = report_num*6+2;//正常模式
            checksum = Checksum_u16(&usart_send[2],report_num*6+2);
            memcpy(&usart_send[4+report_num*6],&checksum,2);
            USART_puts(usart_send,6+report_num*6);
         #endif
            
         for(i=0;i<MAX_NEARBASE_NUM;i++)
         {
            nearbase_distlist[i]=0x1ffff;
         }
   dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_ALL_RX_ERR| SYS_STATUS_TXFRS |SYS_STATUS_RXFCG);
HAL_GPIO_WritePin(LED0_GPIO, GPIO_PIN_9, GPIO_PIN_RESET);

}
u8 nearmsg_mainbase=0,rec_tagpos_emptylist[32];
void GetNearMsg(void)
{
   u32 start_poll,frame_len;
if(nearmsg_mainbase)
   {nearmsg_mainbase=0;
   }else{
   nearmsg_mainbase=1;
   }
   memcpy(&tx_near_msg[ANCHOR_ID_IDX],&nearmsg_mainbase,2);
   memcpy(&tx_near_msg[TAG_ID_IDX],&dev_id,2);
    tx_near_msg[GROUP_ID_IDX] = group_id;
   tx_near_msg[MESSAGE_TYPE_IDX] = NEAR_MSG;
	
   dwt_setrxaftertxdelay(POLL_TX_TO_RESP_RX_DLY_UUS);         //设置发送后开启接收，并设定延迟时间
  dwt_setrxtimeout(RESP_RX_TIMEOUT_UUS);	
   dwt_writetxdata(12, tx_near_msg, 0);//将Poll包数据传给DW1000，将在开启发送时传出去
   dwt_writetxfctrl(12, 0);//设置超宽带发送数据长度
   dwt_starttx(DWT_START_TX_IMMEDIATE| DWT_RESPONSE_EXPECTED);

   /* We assume that the transmission is achieved correctly, poll for reception of a frame or error/timeout. See NOTE 8 below. */
   while (!((status_reg = dwt_read32bitreg(SYS_STATUS_ID)) & (SYS_STATUS_RXFCG | SYS_STATUS_ALL_RX_ERR)))//不断查询芯片状态直到成功接收或者发生错误
   {
   };
   if(status_reg==0xffffffff)
   {
      NVIC_SystemReset();
   }
   if (status_reg & SYS_STATUS_RXFCG)//如果成功接收
   {
      dwt_write32bitreg(SYS_STATUS_ID, SYS_STATUS_RXFCG | SYS_STATUS_TXFRS);//清楚寄存器标志位
      frame_len = dwt_read32bitreg(RX_FINFO_ID) & RX_FINFO_RXFLEN_MASK;   //获得接收到的数据长度
      dwt_readrxdata(rx_buffer, frame_len, 0);   //读取接收数据
      if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_MSG&&!memcmp(&rx_buffer[TAG_ID_IDX],&dev_id,2)) //判断接收到的数据是否是response数据
      {
         nearbase_num=rx_buffer[NEARBASENUM_INDEX];
         memcpy(&rec_tagpos_binary,&rx_buffer[NEARMSG_EMPTYSLOTPOS_INDEX],4);
         tagslotpos=GetRandomSlotPos(rec_tagpos_binary);
         //tagslotpos=rx_buffer[TAGSLOTPOS];
         memcpy(nearbaseid_list,&rx_buffer[NEARBASEID_INDEX],nearbase_num*2);
         //slottime=ceil((nearbase_num+2)*0.3)+1;
         tyncpoll_time=tagslotpos*slottime;
         tag_state=NEARPOLL;
      }
   }else{
         tyncpoll_time = (tagslotpos--%max_slotpos)*slottime;
   }
}
u8 regpoll_count;
u32 id;
void Tag_App(void)//发送模式(TAG标签)
void UWB_Wkup(void)
{
	
   //LED0_ON;
   id =  dwt_readdevid() ;
       while (DWT_DEVICE_ID != id) 
   
    SPIx_CS_GPIO->BRR = SPIx_CS;
    delay_us(600);
    SPIx_CS_GPIO->BSRR = SPIx_CS;
    id =  dwt_readdevid() ;
    while (0xDECA0130!=id) 
    {
         id =  dwt_readdevid() ;
    }
        u8 iderror_count = 0;
        id =  dwt_readdevid() ;
        if(iderror_count++>100)
        {
            printf("UWB芯片ID错误");
            break;
        }
    }  
}
#include "radio.h"
#include "dw_mbx_anc.h"
u8 lora_start_poll_buff[4] = {LORA_MSGTYPE_RANGEPOLL,'I','N','G'};

   g_Resttimer=0;
//   tag_state=DISCPOLL;
   switch(tag_state)
   {
      case DISCPOLL:
      //   Poll();
         break;
      case GETNEARMSG:
uint16_t current_count,target_count;
typedef enum{   Next_Poll_RANGE,
                Next_Poll_LORASYNC,
}nextpoll_enum;
#define UWB 0
#define LORA 1
static uint8_t lora_sendbuffer[40];
static uint16_t wg_report_id=0xffff;
uint8_t seq_num;
static u16 checksum;
#define SEQNUM_IDX          6   //标签报文序号 
#define BAT_IDX             7   //标签电量
#define STATE_IDX           8
#define ANCID_IDX           30   //校验在4*ancnum+ANCID_IDX 位置
#define LORA5_CHANNEL_FRQ 478
#define LORA5_CHANNEL_SF 7
uint8_t poll_state;
void Lora_Poll(void)
{

            GetNearMsg();
	 
         break;
      case NEARPOLL:
         //GPIO_WriteBit(EU_TX_GPIO, EU_RX_PIN, Bit_SET);
         NearPoll();
         //GPIO_WriteBit(EU_TX_GPIO, EU_RX_PIN, Bit_RESET);
         break;
   }
    bat_percent=Get_VDDVlotage();
    SwitchLoraSettings(LORA5_CHANNEL_FRQ,LORA5_CHANNEL_SF,22);
    lora_sendbuffer[MSG_TYPE_IDX] = LORA_MSGTYPE_TAGMSGTOWG_GPS;
    lora_sendbuffer[MSG_LENGTH] = 30;
    memcpy(&lora_sendbuffer[SOURCE_ID_IDX],&g_com_map[DEV_ID],2);
    memcpy(&lora_sendbuffer[DEST_ID_IDX],&wg_report_id,2);
    lora_sendbuffer[SEQNUM_IDX] = seq_num++;
    lora_sendbuffer[BAT_IDX] = bat_percent;
    lora_sendbuffer[STATE_IDX] = 0;
//    memcpy(&lora_sendbuffer[GPS_JINGDU_IDX],&gps_jingdu,8);
//    memcpy(&lora_sendbuffer[GPS_WEIDU_IDX],&gps_jingdu,8);
//    lora_sendbuffer[GPS_STATE_IDX] = gps_state;
//    lora_sendbuffer[GPS_SATEL_NUM_IDX] = gps_satel_num;
//    lora_sendbuffer[GPS_SPOWER_IDX] = gps_signalpower;
//    lora_sendbuffer[GPS_CHAFENLINGQI] = gps_chafenlingqi;
//    lora_sendbuffer[ANCNUM_IDX] = report_ancnum;
//    memcpy(&lora_sendbuffer[ANCID_IDX],report_ancid,report_ancnum*2);
//    memcpy(&lora_sendbuffer[ANCID_IDX+report_ancnum*2],report_ancdist,report_ancnum*2);
    checksum = Checksum_u16(lora_sendbuffer,4*0+ANCID_IDX);
    memcpy(&lora_sendbuffer[ANCID_IDX+0*4],&checksum,2);
    Radio.Send(lora_sendbuffer,ANCID_IDX+0*4+2);
}
nextpoll_enum next_poll_state;
extern uint8_t sync_lost_count;
extern uint8_t Lorahuifu_flag;
extern  int16_t intheight;
extern   u16 uwbdistance;
extern float bat_volt;
extern uint8_t shuzu[3];
extern uint8_t datashuju[50];
extern uint8_t datachangdu;
void Tag_App(void)//发送模式(TAG标签)
{  	
//    SyncStateSwitch();
  if(poll_state==UWB)  //读取本次的工作状态 测距还是同步
  {
      poll_state=LORA;
    current_count=HAL_LPTIM_ReadCounter(&hlptim1);
//    g_com_map[LORA_POWER]=22;
//    g_com_map2[LORA_POWER]=22;
    SwitchLoraSettings(UWB_CHANNEL_FRQ+g_com_map[GROUP_ID],5,g_com_map[LORA_POWER]); //切换lora接收频点  

    memcpy(&lora_start_poll_buff[ANC_ID_IDX],&g_com_map[DEV_ID],2);
    Radio.Send(lora_start_poll_buff, 4);
    UWB_Wkup();   
    delay_us(700);
    MBXANCPoll();
   dwt_entersleep();
//    next_poll_state = Next_Poll_LORASYNC;
  }else{
      poll_state=UWB;
      Lora_Poll();
      if(intheight!=0)
      {
//      printf("高度值:%d\r\n",intheight);
      uartsend(6,intheight);
        memset(datashuju,0,sizeof(datashuju));    
        USART_puts(shuzu, 3);//开始结束都要发
        datachangdu=sprintf(datashuju,"t2.bco=2024");
        USART_puts(datashuju, datachangdu);       
        USART_puts(shuzu, 3);       
      }
      if(uwbdistance!=0)
      {
//      printf("UWB测距值:%d\r\n",uwbdistance);
      uartsend(4,uwbdistance);      
        memset(datashuju,0,sizeof(datashuju));    
        USART_puts(shuzu, 3);//开始结束都要发
        datachangdu=sprintf(datashuju,"t0.bco=2024");
        USART_puts(datashuju, datachangdu);       
        USART_puts(shuzu, 3); 
      }
      if(Lorahuifu_flag)
      {
      Lorahuifu_flag=0;    
      uartsend(5,0);
        memset(datashuju,0,sizeof(datashuju));    
        USART_puts(shuzu, 3);//开始结束都要发
        datachangdu=sprintf(datashuju,"t1.bco=2024");
        USART_puts(datashuju, datachangdu);       
        USART_puts(shuzu, 3); 
      }
    memset(datashuju,0,sizeof(datashuju));    
    USART_puts(shuzu, 3);//开始结束都要发
    datachangdu=sprintf(datashuju,"t7.txt=\"%.2f\"",bat_volt);
    USART_puts(datashuju, datachangdu);       
    USART_puts(shuzu, 3);   
      if(bat_volt>0)
      {
        memset(datashuju,0,sizeof(datashuju));    
        USART_puts(shuzu, 3);//开始结束都要发
        datachangdu=sprintf(datashuju,"t3.bco=2024");
        USART_puts(datashuju, datachangdu);       
        USART_puts(shuzu, 3); 
      }
//     LoraSyncRecPoll();
//      if(GetRangeState())  //获取当前测距状态，是否开启。如果开启下次为测距，否为同步
//      {
//        next_poll_state = Next_Poll_RANGE;
//      }else{
//        next_poll_state = Next_Poll_LORASYNC;
//      }      
  }
//  Radio.Sleep();
//  if(next_poll_state == Next_Poll_LORASYNC)  //设定下一次的唤醒时间
//  {
////      if(sync_state==Sync_Lost)
////      {
////          target_count = GetLoraSyncCount()-(18000)/LPTIMER_LSB+sync_lost_count*1000;
////      }else
//      {
//        target_count = GetLoraSyncCount()-(18000)/LPTIMER_LSB;  //比上次收到的lora提前17ms唤醒（lora接收大概17ms），如果在同步间隔内，则会快速进入休眠。
//      }
//      if(target_count<0)
//      target_count+=32768;
//    __HAL_LPTIM_COMPARE_SET(&hlptim1, target_count);
//  }else{

//    target_count = GetUwbPollCount(); //测距提前2ms唤醒
//    __HAL_LPTIM_COMPARE_SET(&hlptim1, target_count);
//  }
  
}