From 255c51174a0571340ef470184064a5c75d261d27 Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期三, 22 一月 2025 15:06:27 +0800
Subject: [PATCH] 加入一开始不广播升级 中断触发gpio后广播升级 10分钟自动退出
---
01_SDK/nimble/controller/pan107x_spark/include/stack/hci_defs.h | 64 +++++++++++++++++++++++++++++++-
1 files changed, 62 insertions(+), 2 deletions(-)
diff --git a/01_SDK/nimble/controller/pan107x_spark/include/stack/hci_defs.h b/01_SDK/nimble/controller/pan107x_spark/include/stack/hci_defs.h
index 2b2aa59..bf1b12d 100644
--- a/01_SDK/nimble/controller/pan107x_spark/include/stack/hci_defs.h
+++ b/01_SDK/nimble/controller/pan107x_spark/include/stack/hci_defs.h
@@ -316,12 +316,67 @@
* @Name: Vender specific commands
* @{
*/
+/* HCI Vendor[PanChip] OCF Group */
+#define HCI_OCF_VS_GRP_PROPRIETARY_RADIO 0x00
+#define HCI_OCF_VS_GRP_MODEM 0x01
+#define HCI_OCF_VS_GRP_PCTE 0x02
+#define HCI_OCF_VS_GRP_DEBUG 0x0F
+
+/* HCI Vendor OCF for Proprietary Radio Commands */
+#define HCI_OCF_VS_PROPRIETARY_RADIO_RESET 0x00
+#define HCI_OCF_VS_PROPRIETARY_RADIO_INIT 0x01
+#define HCI_OCF_VS_PROPRIETARY_RADIO_SET_DATA 0x02
+#define HCI_OCF_VS_PROPRIETARY_RADIO_TRANSMIT 0x03
+#define HCI_OCF_VS_PROPRIETARY_RADIO_TRANSMIT_ENHANCED 0x04
+#define HCI_OCF_VS_PROPRIETARY_RADIO_RECEIVE 0x05
+#define HCI_OCF_VS_PROPRIETARY_RADIO_RECEIVE_ENHANCED 0x06
+#define HCI_OCF_VS_PROPRIETARY_RADIO_TRANSMIT_TEST 0x07
+#define HCI_OCF_VS_PROPRIETARY_RADIO_RECEIVE_TEST 0x08
+#define HCI_OCF_VS_PROPRIETARY_RADIO_RX_GOON 0x09
+#define HCI_OCF_VS_PROPRIETARY_RADIO_SET_DEV 0x0A
+#define HCI_OCF_VS_PROPRIETARY_RADIO_ADDR_MATCH_BIT 0x0B
+#define HCI_OCF_VS_PROPRIETARY_RADIO_SET_PAYLOAD_ENDIAN 0x0C
+#define HCI_OCF_VS_PROPRIETARY_RADIO_SET_ACK_PAYLOAD 0x0D
+#define HCI_OCF_VS_PROPRIETARY_RADIO_IRQ_MASK 0x0E
+#define HCI_OCF_VS_PROPRIETARY_RADIO_MULTI_PREAMBLE 0x0F
+#define HCI_OCF_VS_PROPRIETARY_RADIO_RX_STOP 0x10
+
+/* HCI Vendor OCF for Modem Commands */
+#define HCI_OCF_VS_MODEM_SPI_PHY_CFG 0x00
+
+/* HCI Vendor OCF for Panchip Constant Tone Extension Commands */
+#define HCI_OCF_VS_PCTE_SET_IQ_SAMPLES 0x00
+#define HCI_OCF_VS_PCTE_SET_PARAMS 0x01
+#define HCI_OCF_VS_PCTE_SET_ADV_ENABLE 0x02
+#define HCI_OCF_VS_PCTE_SET_SCAN_ENABLE 0x03
+
+/* HCI Vendor OCF for Debug */
+#define HCI_OCF_VS_SET_BD_ADDR 0x00
+#define HCI_OCF_VS_CHECK_LEAK 0x01
+#define HCI_OCF_VS_RELEASE_VERSION 0x02
+#define HCI_OCF_VS_SET_TX_POWER 0x03
+#define HCI_OCF_VS_DEBUG_READ_REG 0x07
+#define HCI_OCF_VS_DEBUG_WRITE_REG 0x08
+#define HCI_OCF_VS_DEBUG_PHY 0x09
+#define HCI_OCF_VS_DEBUG_READ_RSSI_GAIN 0x0A
+#define HCI_OCF_VS_DEBUG_CONSTANT_TONE_V1 0x0B
+#define HCI_OCF_VS_DEBUG_CONSTANT_TONE_V2 0x0C
+#define HCI_OCF_VS_DEBUG_REG_RW 0x0D
+#define HCI_OCF_VS_DEBUG_SET_PHY_FREQ 0x0E
+#define HCI_OCF_VS_DEBUG_LE_RECEIVER_TEST 0x0F
+#define HCI_OCF_VS_DEBUG_LE_TRANSMITTER_TEST 0x10
+#define HCI_OCF_VS_DEBUG_SET_LE_TRANSMITTER_PARAMS 0x11
+#define HCI_OCF_VS_DEBUG_SLEEP_ENTER 0x12
+#define HCI_OCF_VS_DEBUG_POWER_MODE 0x13
+#define HCI_OCF_VS_SET_TX_POWER_V2 0x14
+
+/* XiaoMi DFU */
#define HCI_OCF_VS_START_DFU 0x0300
#define HCI_OCF_VS_END_DFU 0x0301
#define HCI_OCF_VS_FW_DATA 0x0302
-#define HCI_OCF_VS_SET_BD_ADDR 0x03C0
-#define HCI_OCF_VS_SET_TX_POWER 0x03C3
+//#define HCI_OCF_VS_SET_BD_ADDR 0x03C0
+//#define HCI_OCF_VS_SET_TX_POWER 0x03C3
/**@}**/
@@ -332,6 +387,11 @@
#define HCI_OPCODE(ogf, ocf) (((ogf) << 10) + (ocf))
#define HCI_OGF(opcode) ((opcode) >> 10)
#define HCI_OCF(opcode) ((opcode) & 0x03FF)
+
+/* Specific for PanChip */
+#define HCI_OCF_VS_GRP(opcode) (HCI_OCF(opcode) >> 6)
+#define HCI_OCF_VS(grp, ocf) (uint16_t)((grp<<6)|(ocf))
+#define HCI_OPCODE_VS(ogf, grp, ocf) HCI_OPCODE(ogf, HCI_OCF_VS(grp, ocf))
/**@}*/
--
Gitblit v1.9.3