From 0c4a7b78eee22326538b29c9a2ddf1c9e6ba0ae4 Mon Sep 17 00:00:00 2001
From: yincheng.zhong <634916154@qq.com>
Date: 星期五, 20 九月 2024 11:17:44 +0800
Subject: [PATCH] 1小时上传，测试成功，GPS数据正常变化
---
keil/include/main/main.c | 104 +++++++++++++++++++++++-----------------------------
1 files changed, 46 insertions(+), 58 deletions(-)
diff --git a/keil/include/main/main.c b/keil/include/main/main.c
index 6c8a0bf..b75f289 100644
--- a/keil/include/main/main.c
+++ b/keil/include/main/main.c
@@ -238,7 +238,7 @@
}
void MinuteTask(void)
{
- adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
+ //adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
}
void SecondTask(void)
{static uint8_t second_count;
@@ -249,7 +249,8 @@
}
//UWB更新列表
TagListUpdate();
- GPS_Poll();
+ //GPS_Poll();
+ GPS_Poll_1h();
//UWB状态检测
if(IfTCPConnected())
@@ -272,14 +273,14 @@
HIDO_TimerTick();
nomove_count++;
}
-uint8_t flag_sleeptimer,flag_secondtask,secondtask_count;
+uint8_t flag_sleeptimer,flag_secondtask,secondtask_count,delaysleep_count;
static void sleep_timer_callback(void *dev, uint32_t time)
{
- IO_control_init();
+ //IO_control_init();
// UWBPoll();
- MotorPoll();
+ //MotorPoll();
if(secondtask_count++%2==0)
{
@@ -290,26 +291,11 @@
flag_sleeptimer = 1;
- //马达震动逻辑
- if(g_com_map[MOTOR_ENABLE])
- {
- if(motor_open_air_flag||moter_open_uwb_flag)
- {
- if (motor_count++%2==0)
- {
- motor_power_state = 1;
- }else{
- motor_power_state = 0;
- }
- } else {
- motor_power_state=1;
- }
- }else{
- motor_power_state=1;
- }
-
+ if(delaysleep_count>0)
+ delaysleep_count--;
//GPS工作逻辑
-
+
+update_led_power_state();//更新灯状态测试
}
static void voltage_input_handler(enum IO_PIN_T pin)
{
@@ -319,15 +305,17 @@
{
nomove_count=0;
}
-uint8_t flag_4G_recdata;
+uint8_t flag_4G_recdata,flag_entersleep;
void _4gUsart_handler(enum IO_PIN_T pin)
{
- LOG_INFO(TRACE_MODULE_APP, "4G RX 唤醒\r\n");
- flag_4G_recdata = 1;
+ // if(!gpio_pin_get_val(_4G_USART_RX_Pin))
+ {
+ LOG_INFO(TRACE_MODULE_APP, "4G RX 唤醒\r\n");
+ flag_4G_recdata = 1;
+ delaysleep_count = 3;
+ }
- power_wakeup_disable((enum POWER_WAKEUP_SOURCE_T)_4G_USART_RX_Pin);
- gpio_disable_irq(_4G_USART_RX_Pin);
- // AIR780EUartInit();
+
}
extern uint16_t ip0,ip1,ip2,ip3,port;
extern uint8_t gps_4g_flag;
@@ -433,7 +421,8 @@
uart_close(UART_ID1);//解绑原来串口1
uart_close(UART_ID0);//解绑原来串口0
}
-uint8_t flag_4guart_needinit=0;
+uint8_t flag_4guart_needinit=0,tt2;
+extern uint8_t gps_need_data_flag;
int main(void)
{
board_clock_run();
@@ -468,7 +457,7 @@
// open system timer
//sys_timer_open();
- // TODO 4G
+// // TODO 4G
Uart_Register(UART_ID_4G, UART_ID0);
Internet_Init();
TCPClient_Init();
@@ -476,17 +465,20 @@
gpio_open();
//board_led_init();
- adc_open(&usr_adc_cfg);
+// adc_open(&usr_adc_cfg);
IIC2_Init();
Accelerometer_Init();
IO_control_init();
+ #ifdef DEBUG_BOXING
io_pin_mux_set(SCL_PIN, IO_FUNC0);//测试测距波形
gpio_pin_set_dir(SCL_PIN , GPIO_DIR_OUT, 0);
io_pull_set(SCL_PIN , IO_PULL_DOWN, IO_PULL_UP_LEVEL4);
+ #endif
gps_air780_power_change(0,1);//开启gps，4G
+
//加速度计初始化必须在IO_control_init之前因为复用SDA引脚
- adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
- uart_open(UART_ID1, &test_uart_cfg);
+// adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
+ //uart_open(UART_ID1, &test_uart_cfg);
Program_Init();
// uart1_change_from_gps_to_debug();
//Uart1GpsRecDebugSend();
@@ -495,26 +487,28 @@
// Initialize low power mode
power_init();
AIR780E_Reset(); //4G模块重启，耗时1.5秒,这个是无法同步的关键
+ //gps_air780_power_change(0,0);//测试
sleep_timer_open(true, SLEEP_TIMER_MODE_RELOAD, sleep_timer_callback);
//sleep_timer_start(__MS_TO_32K_CNT(g_com_map[COM_INTERVAL]));//测试
sleep_timer_start(__MS_TO_32K_CNT(SLEEP_TIMER_NUM));//测试
- // board_5V_input_init(voltage_input_handler);
+ board_5V_input_init(voltage_input_handler);
board_acceleration_detection_init(move_handler);
-// LOG_INFO(TRACE_MODULE_APP, "测试进入app");
- board_4GUsart_detection_init(_4gUsart_handler);
+//// LOG_INFO(TRACE_MODULE_APP, "测试进入app");
+ board_4GUsart_detection_init(_4gUsart_handler);
+// tt2 = gpio_pin_get_val(_4G_USART_RX_Pin);
while (1)
{
-
if(flag_TCP_reconnectting||IfTCPConnected())
{
- if(flag_4G_recdata==1)
+ if(flag_4G_recdata==1)
{
flag_4G_recdata = 2;
+
LOG_INFO(TRACE_MODULE_APP, "运行Socket_RecvAll\r\n");
Socket_RecvAll();
}
air780_led_on();
-LOG_INFO(TRACE_MODULE_APP, "处理4G\r\n");
+//LOG_INFO(TRACE_MODULE_APP, "处理4G\r\n");
Internet_Poll();
HIDO_ATLitePoll();
HIDO_TimerPoll();
@@ -527,30 +521,24 @@
SecondTask();
}
IdleTask();
- //3种情况后都要发包和休眠
- //if(send_flag){
- //message_construct();
- //send_udp;
- //air780_success_state=0;//关闭4G成功发送灯
- //blink_led(&air780_success_state);//成功测距闪烁4G状态灯
- //air780_success_state=0;
- //}
+
#ifndef DEBUG_MODE
//if(flag_sleeptimer)
// if(!gpio_pin_get_val(INPUT_5V_Pin))//AIR780E_IsIPIdle() Socket_IsSendQueueEmpty(0)
// if(flag_4G_recdata!=2)
- if(((IfTCPConnected()&&AIR780E_IsIPIdle()&&Socket_IsSendQueueEmpty(0))||!flag_TCP_reconnectting&&!IfTCPConnected())) //进入休眠条件（与关系，全满足才进）：1.没有5V输入 2 TCP已连接时发送队列为空||TCP无连接时不在重连状态。
- { uint32_t lock;
- flag_4guart_needinit = 1;
- Internet_Poll();
- HIDO_ATLitePoll();
- HIDO_TimerPoll();
- TCPClient_Poll();
- power_wakeup_enable((enum POWER_WAKEUP_SOURCE_T)_4G_USART_RX_Pin, POWER_WAKEUP_LEVEL_LOW);
- LOG_INFO(TRACE_MODULE_APP, "进入休眠\r\n");
+ //if(((IfTCPConnected()&&AIR780E_IsIPIdle()&&Socket_IsSendQueueEmpty(0))||((!flag_TCP_reconnectting)&&!IfTCPConnected()))) //进入休眠条件（与关系，全满足才进）：1.没有5V输入 2 TCP已连接时发送队列为空||TCP无连接时不在重连状态。
+ if(delaysleep_count==0&&!gps_need_data_flag) //GPS工作状态不休眠，4G接收中断唤醒后，延迟2秒再休眠
+ if(((IfTCPConnected()&&AIR780E_IsIPIdle()&&Socket_IsSendQueueEmpty(0))||((!flag_TCP_reconnectting)&&!IfTCPConnected()))) //进入休眠条件（与关系，全满足才进）：1.没有5V输入 2 TCP已连接时发送队列为空||TCP无连接时不在重连状态。
+ {
+ uint32_t lock;
+
+ // power_wakeup_enable((enum POWER_WAKEUP_SOURCE_T)_4G_USART_RX_Pin, POWER_WAKEUP_LEVEL_LOW);
+ //LOG_INFO(TRACE_MODULE_APP, "进入休眠\r\n");
+ // delay_us(300000);
trace_flush();
lock = int_lock();
power_enter_power_down_mode(0);
+ uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
int_unlock(lock);
}
#endif
--
Gitblit v1.9.3