From 2ea6286cc6eeb393d57ace3022634a9e86e7e01d Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期一, 16 六月 2025 14:24:45 +0800
Subject: [PATCH] 这个版本专门测试周围基站数量的 通过串口打印 波特率921600 如果要升级读取等功能用上个版本
---
keil/uwb_app.c | 76 ++++++++++++++++++++++++++++++--------
1 files changed, 60 insertions(+), 16 deletions(-)
diff --git a/keil/uwb_app.c b/keil/uwb_app.c
index bafdb9a..3e9d378 100644
--- a/keil/uwb_app.c
+++ b/keil/uwb_app.c
@@ -116,7 +116,7 @@
uint8_t phy_work_mode; /* PHY_TX / PHY_RX / PHT_TX|PHY_RX */
struct UWB_CONFIG_T phy_cfg;
};
-
+extern uint8_t uwb_ch;
static struct mk_uwb_configure config = {
.phy_work_mode = (uint8_t)(PHY_TX | PHY_RX),
.phy_cfg.ch_num = 5, /* Channel number. */
@@ -230,6 +230,8 @@
extern uint16_t mubiao_anchor_ID;
uint8_t Lora_qingqiu_flag;
extern uint16_t Lora_qingqiu_bao;
+uint8_t shengji_flag;
+extern uint8_t Dtu_shengji_jindu[20];
static void rx_int_callback(struct MAC_HW_REPORT_T *rx_report)
{ uint8_t valid_sts=0;
uint16_t checksum1 = 0,dest_id;
@@ -251,7 +253,8 @@
rssi = rx_report->rssi;
receive_flag=1;
// uart_send(UART_ID0, rx_buf,rx_length, NULL);
- if(rx_buf[MESSAGE_TYPE_IDX]==MBX_POLL)
+ gpio_pin_toggle(IO_PIN_4);
+ if(rx_buf[MESSAGE_TYPE_IDX]==MBX_POLL&&!shengji_flag)
{
Anchor_App();
}
@@ -264,6 +267,7 @@
{
if(!memcmp(&dev_id,&dest_id,2)/*||dest_id==0xffff||(dest_id==0xfffe&&get_channel==5)*/)
{
+ shengji_flag=1;
switch(rx_buf[MSG_TYPE_IDX])
{
case LORA_MSGTYPE_UPDATE_CONFIRM:
@@ -285,8 +289,13 @@
break;
case 0x99:
- LOG_INFO(TRACE_MODULE_APP, "收到结束升级请求\r\n",Lora_qingqiu_bao);
- delay_ms(500);
+// LOG_INFO(TRACE_MODULE_APP, "收到结束升级请求\r\n",Lora_qingqiu_bao);
+ delay_ms(200);
+ Dtu_shengji_jindu[4]=100;
+ memcpy(&Dtu_shengji_jindu[5],&mubiao_anchor_ID,2);
+ uart_send(UART_ID0, Dtu_shengji_jindu,9, NULL);
+
+ delay_ms(1000);
// Lora_upanc_flag=0;
Lora_qingqiu_flag=0;
NVIC_SystemReset();
@@ -317,7 +326,7 @@
// }
}
}
-
+
#ifdef STS_MODE
valid_sts= sts_valid_check();
if (valid_sts)
@@ -463,7 +472,7 @@
//void TagListUpdate(void)
//{
// uint8_t i,j=0;
-// for(i=0; i<anchordata_num; i++)
+// for(i=0; i<taglist_num; i++)
// {
// if(tagofflinetime[i]++<QUIT_SLOT_TIME)
// {
@@ -471,18 +480,18 @@
// tagofflinetime[j++]=tagofflinetime[i];
// }
// }
-// anchordata_num=j;
+// taglist_num=j;
//}
void TagListUpdate(void)
{
uint16_t i,j=0,k=0;
for(i=0; i<taglist_num; i++)
{
- if(tagofflinetime[i]++<TAG_KEEPTIMES)
+ if(tagofflinetime[i]++<10)
{
tagid_list[j]=tagid_list[i];
tagdist_list[j] = tagdist_list[i];
- anchordata_bat[j]=anchordata_bat[i];//电量随之更新
+ anchordata_bat[j]=anchordata_bat[i];//电量随之更新
anchordata_version[j]=anchordata_version[i];
tagofflinetime[j++]=tagofflinetime[i];
}
@@ -518,6 +527,11 @@
//while(mac_is_busy());
gpio_pin_clr(SCL_PIN);
cmd_flag=1;
+ if(send_buffer[RW_FLAG_IDX]==0x01)
+ {
+ delay_ms(100);
+ NVIC_SystemReset();
+ }
break;
}
}
@@ -637,13 +651,40 @@
if(uwb_losttimer>g_com_map[UWB_RNAGE_TIME])
uwb_losttimer=g_com_map[UWB_RNAGE_TIME]+1;//防止溢出
}
-uint8_t uwbsend[200];
+uint8_t uwbsend[1000];
void UWBIdleTask(void)
{
if(HIDO_TimerGetTick()-uwbtasktimer >=1)
{
+
+ for(uint16_t i=0;i<taglist_num-1;i++)
+ {
+ for(uint16_t j=0;j<taglist_num-1-i;j++)
+ {
+ if(tagdist_list[j]>tagdist_list[j+1])
+ {
+ uint16_t id,dist,version;
+ uint8_t bat;
+ id = tagid_list[j];
+ dist = tagdist_list[j];
+ version = anchordata_version[j];
+ tagid_list[j] = tagid_list[j+1];
+ tagdist_list[j] = tagdist_list[j+1];
+ anchordata_version[j] = anchordata_version[j+1];
+ tagid_list[j+1] = id;
+ tagdist_list[j+1] = dist;
+ anchordata_version[j+1] = version;
+ }
+ }
+
+ }
+
+// if(taglist_num>6)
+// {
+// taglist_num=6;
+// }
uwbtasktimer = HIDO_TimerGetTick();
UWBOneSecondTask();
uwbsend[0]=0x55;
@@ -653,11 +694,13 @@
memcpy(&uwbsend[4],&tagid_list,taglist_num*2);
memcpy(&uwbsend[4+taglist_num*2],&tagdist_list,taglist_num*2);
memcpy(&uwbsend[4+taglist_num*4],&anchordata_version,taglist_num*2);
- uart_send(UART_ID0, uwbsend,taglist_num*6+4, NULL);
-// for(int i=0;i<anchordata_num;i++)
-// {
-// LOG_INFO(TRACE_MODULE_APP,"当前测距基站ID:%x,距离:%d.\r\n",tagid_list[0],tagdist_list[0]);
-// }
+// uart_send(UART_ID0, uwbsend,taglist_num*6+4, NULL);
+ // taglist_num=0;
+ LOG_INFO(TRACE_MODULE_APP,"当前测距基站数量%d.\r\n",taglist_num);
+ for(int i=0;i<taglist_num;i++)
+ {
+ LOG_INFO(TRACE_MODULE_APP,"当前测距基站ID:%x,距离:%d.\r\n",tagid_list[i],tagdist_list[i]);
+ }
}
}
int uwb_app_poll(void)
@@ -781,7 +824,7 @@
current_count=phy_timer_count_get();
while(mac_is_busy())
{
- Calibration_Time();
+// Calibration_Time();
IdleTask();
current_count=phy_timer_count_get();
if(current_count>end_receive_count&¤t_count<end_receive_count+HALF_SECOND_TIME)
@@ -879,6 +922,7 @@
phy_rx_ant_mode_set(RX_ANT_PORTS_COMBINATION);
#endif
// Set calibration parameters
+// config.phy_cfg.ch_num=g_com_map[NEARBASE_ID1];
uwb_calibration_params_set(config.phy_cfg.ch_num);
#ifndef STS_MODE
// set advanced parameters
--
Gitblit v1.9.3