From 2ebb8217f43b69f491620423ea4d5d5944d1f91d Mon Sep 17 00:00:00 2001
From: yincheng.zhong <634916154@qq.com>
Date: 星期六, 05 七月 2025 22:43:58 +0800
Subject: [PATCH] 格式化部分代码
---
keil/include/drivers/WS2812.c | 45 ++++++++++++++++++++++++---------------------
1 files changed, 24 insertions(+), 21 deletions(-)
diff --git a/keil/include/drivers/WS2812.c b/keil/include/drivers/WS2812.c
index dd42589..03d7052 100644
--- a/keil/include/drivers/WS2812.c
+++ b/keil/include/drivers/WS2812.c
@@ -1,27 +1,27 @@
#include "WS2812.h"
-void w28delay(uint32_t nTimer)
-{
- uint32_t i=0;
- for(i=0;i<nTimer;i++){
+void w28delay(uint32_t nTimer)
+{
+ uint32_t i=0;
+ for(i=0; i<nTimer; i++) {
__NOP();
-
- }
+
+ }
}
void RGB_Set_Up()
{
- gpio_handle[0].base->DATAOUT = gpio_handle[0].base->DATAOUT | (1U << WS2812_PIN);
+ gpio_handle[0].base->DATAOUT = gpio_handle[0].base->DATAOUT | (1U << WS2812_PIN);
w28delay(40);
- gpio_handle[0].base->DATAOUT = gpio_handle[0].base->DATAOUT & (~(1U << WS2812_PIN));
+ gpio_handle[0].base->DATAOUT = gpio_handle[0].base->DATAOUT & (~(1U << WS2812_PIN));
w28delay(18);//success 15
}
void RGB_Set_Down()
{
// WS_PIN_1;
- gpio_handle[0].base->DATAOUT = gpio_handle[0].base->DATAOUT | (1U << WS2812_PIN);
+ gpio_handle[0].base->DATAOUT = gpio_handle[0].base->DATAOUT | (1U << WS2812_PIN);
w28delay(8);
// WS_PIN_0;
- gpio_handle[0].base->DATAOUT = gpio_handle[0].base->DATAOUT & (~(1U << WS2812_PIN));
+ gpio_handle[0].base->DATAOUT = gpio_handle[0].base->DATAOUT & (~(1U << WS2812_PIN));
w28delay(25);
}
uint32_t temp_G8;
@@ -29,26 +29,26 @@
void RGB_Set(uint32_t G8R8B8)
{
int i;
- temp_G8=G8R8B8;
+ temp_G8=G8R8B8;
uint8_t byte=0;
- for(i=23;i>=0;i--)
+ for(i=23; i>=0; i--)
{
byte = ((G8R8B8>>i)&0x1);
- byte_temp=byte;
+ byte_temp=byte;
if(byte == 1)
{
RGB_Set_Up();
- }else{
+ } else {
RGB_Set_Down();
}
-
+
}
}
void RGB_Rst(void)
{
- WS_PIN_0;
+ WS_PIN_0;
w28delay(3600);
- // WS_PIN_1;
+ // WS_PIN_1;
}
uint32_t uwbled,rtkled,led4g,powerled;
void Set4LEDColor(uint32_t firstled,uint32_t secondled,uint32_t thirdled,uint32_t fourthled)
@@ -56,15 +56,18 @@
__disable_irq();
RGB_Rst();
RGB_Set(firstled);
-
+
RGB_Set(secondled);
-
+
RGB_Set(thirdled);
-
+
RGB_Set(fourthled);
__enable_irq();
//RGB_Rst();
}
-
+//void Set4LEDColor_Off(void)
+//{
+//HAL_GPIO_WritePin(GPIOB, GPIO_PIN_6, GPIO_PIN_RESET);
+//}
--
Gitblit v1.9.3