From 33a728fdc172f59a313cee92da153b37c14c450e Mon Sep 17 00:00:00 2001
From: chen <15335560115@163.com>
Date: 星期四, 12 六月 2025 15:25:33 +0800
Subject: [PATCH] 修改sleep引脚版本，并且成功打印log版本
---
keil/include/main/main.c | 180 ++++++++++++++++++++++++++++++++++++++++++++++++++++++------
1 files changed, 162 insertions(+), 18 deletions(-)
diff --git a/keil/include/main/main.c b/keil/include/main/main.c
index 6c9ab6b..7b8836d 100644
--- a/keil/include/main/main.c
+++ b/keil/include/main/main.c
@@ -113,11 +113,13 @@
//*****************************************************************************
#define WSF_BUF_POOLS 5
void Fira_Change_Task(void);
-extern uint8_t normal_flag,log_4g_enable_flag;
+extern uint8_t normal_flag,log_4g_enable_flag,lora_tx_flag;
extern uint16_t ip0,ip1,ip2,ip3,port;
uint8_t group_id,enable_sleep_count;
uint32_t dev_id;
uint16_t disoffset;
+uint8_t flag_sleeptimer,flag_secondtask,secondtask_count;
+float nomove_count;
// Default pool descriptor.
static wsfBufPoolDesc_t poolDescriptors[WSF_BUF_POOLS] = {
{32, 26}, {64, 24}, {128, 4}, {256 + 32, 4}, {1024 + 32, 2},
@@ -127,9 +129,22 @@
{
// LOG_INFO(TRACE_MODULE_APP, "Wake up by sleep timer %d\r\n", time);
}
+static void sleep_timer_callback_normal(void *dev, uint32_t time)
+{
+ if(secondtask_count++%2==0)
+ {
+ flag_secondtask = 1;
+ }else{
+ flag_secondtask = 0;
+ }
+
+// if(delaysleep_count>0)
+// delaysleep_count--;
+}
void Program_Init(void)
{
Usart1ParseDataCallback = UsartParseDataHandler;//需改为默认为gps处理，UsartParseDataHandler为升级处理当调试时候改为
+
parameter_init_anchor();//g_com_map表初始化角色默认为基站
dev_id=g_com_map[DEV_ID];//这里不太对
group_id=(uint8_t)g_com_map[GROUP_ID];//组ID
@@ -155,10 +170,96 @@
port = g_com_map[TCP_PORT];
g_com_map[VERSION] = (1<<8)|0;
LOG_INFO(TRACE_MODULE_APP,"设备ID: %x .\r\n",dev_id);
- LOG_INFO(TRACE_MODULE_APP,"固件版本:4G-GPS定位手环 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+// if(gpio_pin_get_val(MODE_CHANGE_PIN))
+// LOG_INFO(TRACE_MODULE_APP,"固件版本:MK_Air_tag模式 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+// else{
+// LOG_INFO(TRACE_MODULE_APP,"固件版本:MK_免布线模式 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+// }
LOG_INFO(TRACE_MODULE_APP,"服务器地址: %d.%d.%d.%d:%d.\r\n",ip0,ip1,ip2,ip3,port);
}
+void MinuteTask(void)
+{
+// adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
+}
+/********************************************************************************************************/
+static void Lora_irq_handler(enum IO_PIN_T pin)
+{
+ RadioIrqProcess();
+}
+void SecondTask(void)
+{static uint8_t second_count;
+
+ if(second_count++>60)
+ {
+ second_count = 0;
+ MinuteTask();
+ }
+ lora_tx_flag=1;
+
+ //Lora_Tx_Poll();
+// //UWB状态检测
+//if(!power_low_flag)//低供电下不需要检测重连
+// {
+// if(IfTCPConnected())
+// {
+// TCP_reconnect_timer =0;
+// flag_TCP_reconnectting = 0;
+// } else {
+// if(TCP_reconnect_timer<30)//如果TCP没有连接，每隔10分钟尝试连接30秒
+// {
+// flag_TCP_reconnectting = 1;
+// } else {
+// flag_TCP_reconnectting = 0;
+// }
+// if(TCP_reconnect_timer++>600)
+// {
+// TCP_reconnect_timer = 0;
+// }
+// }
+// }
+
+ HIDO_TimerTick();
+ if(nomove_count<=g_com_map[NOMOVESLEEP_TIME])//防止溢出
+ nomove_count++;
+ else{
+ nomove_count=g_com_map[NOMOVESLEEP_TIME]+1;
+ }
+}
+void spi_init(void)
+{
+ struct SPI_CFG_T usr_spi_cfg =
+ {
+ .bit_rate = 1000000,
+ .data_bits = 8,
+//#if TEST_SPI_MASTER
+ .slave = 0,
+//#else
+// .slave = 1,
+//#endif
+ .clk_phase = 0,
+ .clk_polarity = 0,
+ .ti_mode = 0,
+//#if (TEST_SPI_MODE == TEST_SPI_POLL_MODE)
+ .dma_rx = false,
+ .dma_tx = false,
+ .int_rx = false,
+ .int_tx = false,
+//#elif (TEST_SPI_MODE == TEST_SPI_INTERUPT_MODE)
+// .dma_rx = false,
+// .dma_tx = false,
+// .int_rx = true,
+// .int_tx = true,
+//#elif (TEST_SPI_MODE == TEST_SPI_DMA_MODE)
+// .dma_rx = true,
+// .dma_tx = true,
+// .int_rx = false,
+// .int_tx = false,
+//#endif
+ };
+
+ spi_open(SPI_ID0, &usr_spi_cfg);
+}
static void board_init(void)
{
uint32_t internal_flash = (REG_READ(0x40000018) >> 17) & 0x1;
@@ -203,11 +304,14 @@
// Configure IO_04 for RF Switch
gpio_pin_set_dir(IO_PIN_4, GPIO_DIR_OUT, 0);
#else
- Program_Init();
- // led
- board_led_init();
+
+ spi_init();
+ // 模式判断脚和spi nrst脚初始化
+ board_mode_pin_init();
+ Program_Init();
// board_led_on(BOARD_LED_1);
#endif
+ Board_LORA_NVIC_Init(Lora_irq_handler);
board_configure();
}
@@ -241,7 +345,22 @@
{
uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
}
-
+void uart0_receive_callback(void *dev, uint32_t err_code)
+{
+ uart_receive(UART_ID0,m_EUART0_DMA_RXBuf,EUART0_RX_BUF_SIZE,uart0_receive_callback);
+}
+uint8_t bat_percent;
+uint8_t stationary_flag;
+void mcu_deep_sleep(void)
+{
+ uint32_t lock;
+ trace_flush();
+
+ lock = int_lock();
+ sleep_timer_stop();
+ power_enter_power_down_mode(1);
+ int_unlock(lock);
+}
int main(void)
{
// Initialize MCU system
@@ -249,10 +368,12 @@
// Disable watchdog timer
wdt_close(WDT_ID0);
LOG_INFO(TRACE_MODULE_APP, "UCI FiRa example\r\n");
- if(gpio_pin_get_val(MODE_CHANGE_PIN))
+ //delay_ms(300);//使log打印完毕
+ if(gpio_pin_get_val(SLEEP_PIN))
{
-
-
+ if(gpio_pin_get_val(MODE_CHANGE_PIN))//记得改回来与正式的相反
+ {
+ LOG_INFO(TRACE_MODULE_APP,"固件版本:MK_Air_tag模式 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
// Platform init for WSF
PalSysInit();
@@ -348,26 +469,49 @@
while (1)
{
wsfOsDispatcher();
-#ifdef MY_MODE
- if(normal_flag)
- {
- IdleTask();
- }
-#endif
power_manage();
+ if(!gpio_pin_get_val(SLEEP_PIN))
+ {
+ LOG_INFO(TRACE_MODULE_APP, "进入休眠模式\r\n");
+ mcu_deep_sleep();
+ }
}
- }else{
-// adc_open(&usr_adc_cfg);
+ }else{
+ LOG_INFO(TRACE_MODULE_APP,"固件版本:MK_免布线模式 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+ uart0_Init_normal();
+ Lora_1268_Init();
+ SwitchLoraSettings(478,7,22);
Uwb_init();//默认为我们测距配置
OpenUWB();
uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
+ uart_receive(UART_ID0,m_EUART0_DMA_RXBuf,EUART0_RX_BUF_SIZE,uart0_receive_callback);
+ power_init();
+ sleep_timer_open(true, SLEEP_TIMER_MODE_RELOAD, sleep_timer_callback_normal);
+ sleep_timer_start(__MS_TO_32K_CNT(SLEEP_TIMER_NUM));//测试
while (1)
{
uwb_app_poll();//我们的测距逻辑
+ if(flag_secondtask)
+ {
+ flag_secondtask = 0;
+ SecondTask();
+ //Lora_Tx_Poll();
+ }
+ Lora_Tx_Poll();
+ if(!gpio_pin_get_val(SLEEP_PIN))
+ {
+ LOG_INFO(TRACE_MODULE_APP, "进入休眠模式\r\n");
+ mcu_deep_sleep();
+ }
IdleTask();
}
}
-
+}else{
+//delay_ms(300);
+ LOG_INFO(TRACE_MODULE_APP, "进入休眠模式\r\n");
+ power_init();
+ mcu_deep_sleep();
+}
}
void app_restore_from_power_down(void)
--
Gitblit v1.9.3