From 44812eee65f5e9eb47c2b01b6cf86c101083eb61 Mon Sep 17 00:00:00 2001
From: chen <15335560115@163.com>
Date: 星期五, 25 七月 2025 17:41:24 +0800
Subject: [PATCH] 修改激活对应com表标志位位置，避免与其他元素耦合
---
keil/uwb_app.c | 41 ++++++++++++++++++++++++++++++-----------
1 files changed, 30 insertions(+), 11 deletions(-)
diff --git a/keil/uwb_app.c b/keil/uwb_app.c
index 641255b..a23570b 100644
--- a/keil/uwb_app.c
+++ b/keil/uwb_app.c
@@ -32,7 +32,7 @@
static uint8_t frame_seq_nb2,battary,button,rec_nearbase_num,ancidlist_num;
static uint16_t ancidlist_rec[TAG_NUM_IN_SYS],ancidlist_send[TAG_NUM_IN_SYS],rec_ancidlist[TAG_NUM_IN_SYS];
static int16_t rec_ancdistlist[TAG_NUM_IN_SYS];
-extern uint8_t group_id;
+extern uint16_t group_id;
static uint16_t anc_id_recv,tag_id_recv;
static int16_t rec_antdelay;
extern uint32_t dev_id;
@@ -284,9 +284,9 @@
angle =angle*57.3;
//offset=10;
//angle+=offset;
-if(angle>=90)
+while(angle>=90)
angle-=180;
-else if(angle<=-90)
+while(angle<=-90)
{
angle+=180;
}
@@ -384,7 +384,6 @@
temp_count= phy_timer_count_get();
memcpy(&rx_rpt, rx_report, sizeof(struct MAC_HW_REPORT_T));
rx_length = 0;
-
}
}
@@ -498,11 +497,12 @@
uint8_t flag_temp2,flag_temp1;
+uint8_t tx_num;
uint8_t Anchor_RecNearPoll(uint8_t ancrec_nearbasepos)//根据自己是否为新基站定制消息去发送，根据是否抢占判断
{
temp_count2=poll_rx_en_start_u32;
- memcpy(&send_buffer[GROUP_ID_IDX],&group_id,1);//组id
+ memcpy(&send_buffer[GROUP_ID_IDX],&group_id,2);//组id变为2字节
memcpy(&send_buffer[ANCHOR_ID_IDX],&dev_id,2);//自身id
memcpy(&send_buffer[TAG_ID_IDX],&tag_id_recv,2);//接受者id
send_buffer[MESSAGE_TYPE_IDX]=MBX_RESPONSE;
@@ -532,6 +532,7 @@
temp_count3= phy_timer_count_get();
flag_temp2=uwb_tx(send_buffer, 60,1 ,resp_tx_en_start_u32);//立即发送测试size大小
temp_count1=phy_timer_count_get();
+ tx_num++;
while(mac_is_busy());
}
@@ -846,6 +847,7 @@
// LOG_INFO(TRACE_MODULE_APP, "Peer %X, $%d %d;\r\n", READ_SHORT(mac_addr), (int16_t)angle_meas,(int16_t)post_angle);
#endif
}
+uint16_t temp_group_id;
int UwbRange(void)
{
uint8_t i;
@@ -904,8 +906,9 @@
{
gpio_pin_clr(SCL_PIN);
//if(group_id==rx_buf[GROUP_ID_IDX]&&rx_buf[MESSAGE_TYPE_IDX] == MBX_POLL&&!memcmp(&rx_buf[TAG_ID_IDX],&g_com_map[BIND_DEV_ID],2))//判断是否是和自己是同一组通讯的且为poll包
- if(group_id==rx_buf[GROUP_ID_IDX]&&rx_buf[MESSAGE_TYPE_IDX] == MBX_POLL)//判断是否是和自己是同一组通讯的且为poll包
+ if(memcmp(&group_id,&rx_buf[GROUP_ID_IDX],2)==0&&rx_buf[MESSAGE_TYPE_IDX] == MBX_POLL)//判断是否是和自己是同一组通讯的且为poll包
{ flag_recsuccess = 1;
+
memcpy(&g_com_receive_id,&rx_buf[TAG_ID_IDX],2);
// sleep_timer_start(__MS_TO_32K_CNT(UWB_DELAY_TIME_US));//测试
temp_count2=phy_timer_count_get();
@@ -924,6 +927,14 @@
PushAnchorDataArray(tag_id_recv,rec_ancdistlist[i],battary);
}
}
+ if(g_com_map[BIND_START_INDEX])//如果开启配对
+ {
+ if(distance<=200)//小于200m的才可配对
+ {
+ memcpy(&temp_group_id,&rx_buf[BIND_GROUP],2);
+
+ }
+ }
for(i=0; i<rec_nearbase_num; i++)
{
memcpy(&tempid,&rx_buf[FZ_NEARBASEID_INDEX+i*2],2);
@@ -958,7 +969,7 @@
// LOG_INFO(TRACE_MODULE_APP, "PDOA: %f %f %f\r\n", pdoa[0], pdoa[1], pdoa[2]);
//angle_temp=angle_calculate();
angle_temp=-mk_q7_to_s16(azimuth);
- sts_rssi = sts_rssi_output_get();
+ //sts_rssi = sts_rssi_output_get();
}
recev_error_num=0;
@@ -972,11 +983,19 @@
CalibratePdOffset(angle_temp);
}else{
angle_temp+=pd_offset;
- buffer_construct(tag_id_recv,distance,(int16_t)angle_temp,rssi);
- uart_send(TRACE_PORT_UART0,usart_send,10+17,NULL);
- //buffer_log_send(tag_id_recv,distance,(int16_t)angle_temp);
- }
+
+// while(angle_temp>=90)
+// angle_temp-=180;
+// while(angle_temp<=-90)
+// {
+// angle_temp+=180;
+// }
+ buffer_construct(tag_id_recv,distance,(int16_t)angle_temp,rssi);
+ uart_send(TRACE_PORT_UART0,usart_send,10+17,NULL);
+ //buffer_log_send(tag_id_recv,distance,(int16_t)angle_temp);
+ }
+
//LOG_INFO(TRACE_MODULE_APP,"标签ID：%X,距离: %d 角度 :%lf\r\n",g_com_receive_id,distance,angle_temp);
//check_if_in_or_out_car(g_com_receive_id,distance,sts_rssi[1],sts_rssi[2]);
success_num++;
--
Gitblit v1.9.3