From 50bba4559b0c7846613efd6bf9ec8a9c3b1982ce Mon Sep 17 00:00:00 2001
From: WXK <287788329@qq.com>
Date: 星期二, 18 二月 2025 16:59:11 +0800
Subject: [PATCH] 移植了外国sx1268lora模块代码。等板子再调，刚把error解决
---
keil/uwb_app.c | 673 ++++++++++++-------------------------------------------
1 files changed, 150 insertions(+), 523 deletions(-)
diff --git a/keil/uwb_app.c b/keil/uwb_app.c
index a5a38f3..a26a04d 100644
--- a/keil/uwb_app.c
+++ b/keil/uwb_app.c
@@ -5,12 +5,12 @@
#include "mk_power.h"
#include "mk_sleep_timer.h"
#include "lib_ranging.h"
-#include "lib_aoa.h"
#include "dw_app_anchor.h"
#include "global_param.h"
#include "board.h"
+#include "Lora.h"
#include "lib_aoa.h"
-
+#include <serial_at_cmd_app.h>
extern int simple_main(void);
extern int temp_main(void);
void Calibration_Time(void);
@@ -37,7 +37,7 @@
extern uint8_t group_id;
static uint16_t anc_id_recv,tag_id_recv;
static int16_t rec_antdelay;
-extern uint32_t dev_id;
+extern uint16_t dev_id;
static uint16_t taglist_pos,tmp_time;
extern uint16_t tag_frequency;
extern uint16_t disoffset;
@@ -47,7 +47,7 @@
//resp函数
void PushAnchorDataArray(uint16_t ancid,int16_t dist,uint8_t battary);//找到自己的id信息对应位置更新自己的交互信息
static void resp_msg_set_ts(uint8_t *ts_field, int64_t ts);//用来对应位置放入时间戳
-static uint16_t tagid_list[TAG_NUM_IN_SYS];
+uint16_t tagid_list[TAG_NUM_IN_SYS];
uint16_t CmpTagInList(uint16_t tagid);
uint8_t Anchor_RecNearPoll(uint8_t ancrec_nearbasepos);
static uint8_t send_buffer[100];
@@ -78,7 +78,7 @@
#define RANGING_PERIOD_MS (1000)
/* This is the delay from Frame RX POLL frame to send RESP Frame */
-#define POLL_RX_TO_RESP_TX_DLY_US 2000U //yuan670 with urt 3000success
+#define POLL_RX_TO_RESP_TX_DLY_US 550U //yuan600 success 并且不卡busy
#define RESP_TX_TO_FINAL_RX_DLY_US 500U
@@ -97,7 +97,7 @@
/* RX window open in advance */
#define RX_WIN_IN_ADVANCE_US (150)
-#define DELAY_BETWEEN_TWO_FRAME_UUS 300 //yuan1400
+#define DELAY_BETWEEN_TWO_FRAME_UUS 500 //yuan1400
/* Field index in frame */
#define MSG_SEQ_NUM_IDX 2
@@ -108,7 +108,6 @@
#define HALF_SECOND_TIME 624000000
/* Length of the common part of the message */
#define MSG_COMMON_LEN 10
-
#define UWB_DELAY_TIME_US 496
static uint8_t receive_flag=0;
struct mk_uwb_configure
@@ -117,23 +116,6 @@
struct UWB_CONFIG_T phy_cfg;
};
-///* Default communication configuration. */
-//static struct mk_uwb_configure config = {//原来的基站非110k代码
-// .phy_work_mode = (uint8_t)(PHY_TX | PHY_RX),
-// .phy_cfg.ch_num = 5, /* Channel number. */
-// .phy_cfg.code_index = 9, /* TX preamble code. */
-// .phy_cfg.mean_prf = MEAN_PRF_64M, /* Data rate 6.8M */
-// .phy_cfg.data_bit_rate = DATA_BR_6M8, /* data rate 6.8M. */
-// .phy_cfg.sync_sym = PREAM_LEN_128, /* Preamble duration, length of preamble 128 */
-// .phy_cfg.sfd_sym = BPRF_NSFD2_8, /* Identifier for SFD sequence */
-// .phy_cfg.ranging_bit = 1, /* ranging bit set. */
-// .phy_cfg.trx_mode = TRX_MODE_15_4Z_BPRF, /* IEEE802.15.4z - BPRF mode */
-// .phy_cfg.sts_pkt_cfg = STS_PKT_CFG_0, /* SP0 Frame */
-// .phy_cfg.sts_segnum = STS_SEGNUM_BPRF_1, /* Number of STS segments in the frame */
-// .phy_cfg.sts_seglen = STS_SEGLEN_BPRF_64, /* Number of symbols in an STS segment */
-// .phy_cfg.rx_ant_id = UWB_RX_ANT_3, /* UWB RX antenna port */
-//};
-#ifndef STS_MODE
static struct mk_uwb_configure config = {
.phy_work_mode = (uint8_t)(PHY_TX | PHY_RX),
.phy_cfg.ch_num = 5, /* Channel number. */
@@ -149,55 +131,12 @@
.phy_cfg.sts_seglen = STS_SEGLEN_BPRF_64, /* Number of symbols in an STS segment */
.phy_cfg.rx_ant_id = UWB_RX_ANT_3, /* UWB RX antenna port */
};
-#else
-static struct mk_uwb_configure config = {
- .phy_work_mode = (uint8_t)(PHY_TX | PHY_RX),
- .phy_cfg.ch_num = 5, /* Channel number. */
- .phy_cfg.code_index = 9, /* TRX preamble code */
- .phy_cfg.mean_prf = MEAN_PRF_64M, /* Mean prf 64/128/256M */
- .phy_cfg.data_bit_rate = DATA_BR_6M8, /* Data rate 6.8M */
- .phy_cfg.sync_sym = PREAM_LEN_128, /* Preamble duration, length of preamble 128 */
- .phy_cfg.sfd_sym = BPRF_NSFD2_8, /* Identifier for SFD sequence */
- .phy_cfg.ranging_bit = 1, /* ranging bit set 1 */
- .phy_cfg.trx_mode = TRX_MODE_15_4Z_BPRF, /* IEEE802.15.4z - BPRF mode */
- .phy_cfg.sts_pkt_cfg = STS_PKT_CFG_1, /* SP1 Frame */
- .phy_cfg.sts_segnum = STS_SEGNUM_BPRF_1, /* Number of STS segments in the frame */
- .phy_cfg.sts_seglen = STS_SEGLEN_BPRF_64, /* Number of symbols in an STS segment */
- .phy_cfg.rx_ant_id = UWB_RX_ANT_3, /* UWB RX antenna port */
-};
-#endif
-/* Use the default key and IV specified in the IEEE 802.15.4z attachment */
-static struct UWB_STS_KEY_CONFIG_T sts_iv_key = {
- .sts_vcounter = 0x1F9A3DE4,
- .sts_vupper0 = 0xD37EC3CA,
- .sts_vupper1 = 0xC44FA8FB,
- .sts_vupper2 = 0x362EEB34,
- .sts_key0 = 0x14EB220F,
- .sts_key1 = 0xF86050A8,
- .sts_key2 = 0xD1D336AA,
- .sts_key3 = 0x14148674,
-};
+
static struct anchor_id_car{
uint16_t anchor_new_id;
uint16_t change_num;
};
-/* Buffer to store received frame */
-/* Frames used in the ranging process
- * Poll message:
- * - byte 0 - 1: 0x8841 to indicate a data frame using 16-bit addressing.
- * - byte 2: sequence number, incremented for each new frame.
- * - byte 3 - 4: PAN Id 0x4B4d
- * - byte 5 - 6: Destination address
- * - byte 7 - 8: Source address
- * - byte 9: Message type (0x02 RANGING_POLL / 0x03 RANGING_RESPONSE / 0x04 RANGING_FINAL)
- * Response message:
- * - byte 10: activity code (0x07 to tell the initiator to go on with the ranging exchange)
- * Final message:
- * - byte 10 - 13: poll message transmission timestamp.
- * - byte 14 - 17: response message reception timestamp.
- * - byte 18 - 21: final message transmission timestamp.
- */
static uint8_t rx_poll_msg[] = {0x41, 0x88, 0, 0x4D, 0x4B, 0x53, 0x45, 0x4D, 0x49, 0x02};
static uint8_t tx_resp_msg[] = {0x41, 0x88, 0, 0x4D, 0x4B, 0x4D, 0x49, 0x53, 0x45, 0x03, 0x07};
static uint8_t rx_final_msg[] = {0x41, 0x88, 0, 0x4D, 0x4B, 0x53, 0x45, 0x4D, 0x49, 0x04, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
@@ -265,8 +204,17 @@
uint32_t range_timeout_us = 2000000;//yuan5000
uint8_t flag_temp2,flag_temp1;
uint16_t uwb_losttimer;
+uint8_t lorarec_usart_send[200]={0x55,0xaa};
+uint16_t lorarec_tagid;
+extern uint8_t send_lora_data[250];
+uint8_t Lora_upanc_time;
+uint8_t update_tag_time;
+extern uint16_t mubiao_anchor_ID;
+uint8_t Lora_qingqiu_flag;
+extern uint16_t Lora_qingqiu_bao;
static void rx_int_callback(struct MAC_HW_REPORT_T *rx_report)
{ uint8_t valid_sts=0;
+ uint16_t checksum1 = 0,dest_id;
// Power off radio
power_off_radio();
@@ -284,22 +232,11 @@
poll_rx_num++;
rssi = rx_report->rssi;
receive_flag=1;
- Anchor_App();
- #ifdef STS_MODE
- valid_sts= sts_valid_check();
- if (valid_sts)
- {
- aoa_calculate(&elevation, &azimuth);
- aoa_fom_get(NULL, &fom);
-// float pdoa[3];
-// pdoa[0] = pdoa_select_get(0, 3);
-// pdoa[1] = pdoa_select_get(1, 3);
-// pdoa[2] = pdoa_select_get(2, 3);
-// LOG_INFO(TRACE_MODULE_APP, "PDOA: %f %f %f\r\n", pdoa[0], pdoa[1], pdoa[2]);
-
- sts_rssi = sts_rssi_output_get();
- }
- #endif
+// uart_send(UART_ID0, rx_buf,rx_length, NULL);
+ if(rx_buf[MESSAGE_TYPE_IDX]==MBX_POLL)
+ {
+ Anchor_App();
+ }
}
else
{
@@ -312,9 +249,10 @@
temp_count= phy_timer_count_get();
memcpy(&rx_rpt, rx_report, sizeof(struct MAC_HW_REPORT_T));
rx_length = 0;
- OpenUWB();//再次开启UWB接收
+// OpenUWB();//再次开启UWB接收
}
- //OpenUWB();//再次开启UWB接收
+ OpenUWB();//再次开启UWB接收
+// LOG_INFO(TRACE_MODULE_APP,"RXdone_uwb_rx打开\r\n");
}
/* TX done process handler. */
@@ -329,15 +267,20 @@
temp_count= phy_timer_count_get();
temp_internal=temp_count;
resp_tx_num++;
- OpenUWB();//再次开启UWB接收
+// if(update_tag_time>0)
+// {
+// OpenUWB();//再次开启UWB接收
+// LOG_INFO(TRACE_MODULE_APP,"TXdone_uwb_rx打开\r\n");
+// }
//LOG_INFO(TRACE_MODULE_APP, "poll_rx_num is %d,resp_tx_num is %d\r\n",poll_rx_num,resp_tx_num);
}
}
uint32_t start_receive_count,end_receive_count,poll_timeout,current_count,temp_resp;
- uint16_t anchordata_id[TAG_NUM_IN_SYS],anchordata_dist[TAG_NUM_IN_SYS];
+int16_t anchordata_id[TAG_NUM_IN_SYS],anchordata_dist[TAG_NUM_IN_SYS];
static uint8_t anchordata_bat[TAG_NUM_IN_SYS];
+static uint16_t anchordata_version[TAG_NUM_IN_SYS];
uint8_t anchordata_num = 0;
-static int32_t tagdist_list[TAG_NUM_IN_SYS];
+uint16_t tagdist_list[TAG_NUM_IN_SYS];
uint16_t random_time;
//anchor
int32_t hist_dist;
@@ -379,7 +322,7 @@
{ uint16_t i;
for(i=0; i<taglist_num; i++)
{
- if(memcmp(&tagid,&anchordata_id[i],2)==0)
+ if(memcmp(&tagid,&tagid_list[i],2)==0)
break;
}
if(i==taglist_num)
@@ -388,6 +331,15 @@
return i;
}
+uint16_t ExistInTagList(uint16_t tagid)
+{ uint16_t i;
+ for(i=0; i<taglist_num; i++)
+ {
+ if(memcmp(&tagid,&tagid_list[i],2)==0)
+ return 1;
+ }
+ return 0;
+}
uint16_t CmpCarInExistList(uint16_t tagid)
{ uint16_t i;
for(i=0; i<anchordata_num; i++)
@@ -412,24 +364,40 @@
}
}
+//void TagListUpdate(void)
+//{
+// uint8_t i,j=0;
+// for(i=0; i<anchordata_num; i++)
+// {
+// if(tagofflinetime[i]++<QUIT_SLOT_TIME)
+// {
+// anchordata_id[j]=anchordata_id[i];
+// tagofflinetime[j++]=tagofflinetime[i];
+// }
+// }
+// anchordata_num=j;
+//}
void TagListUpdate(void)
{
- uint8_t i,j=0;
- for(i=0; i<anchordata_num; i++)
+uint16_t i,j=0,k=0;
+ for(i=0; i<taglist_num; i++)
{
- if(tagofflinetime[i]++<QUIT_SLOT_TIME)
+ if(tagofflinetime[i]++<TAG_KEEPTIMES)
{
- anchordata_id[j]=anchordata_id[i];
+ tagid_list[j]=tagid_list[i];
+ tagdist_list[j] = tagdist_list[i];
+ anchordata_bat[j]=anchordata_bat[i];//电量随之更新
+ anchordata_version[j]=anchordata_version[i];
tagofflinetime[j++]=tagofflinetime[i];
}
- }
- anchordata_num=j;
+ }
+ taglist_num=j;
}
-
-
-
+uint16_t g_com_receive_id;
+uint8_t cmd_flag,position;;
uint8_t Anchor_RecNearPoll(uint8_t ancrec_nearbasepos)//根据自己是否为新基站定制消息去发送，根据是否抢占判断
{
+ uint16_t checksum1 = 0;
temp_count2=poll_rx_en_start_u32;
memcpy(&send_buffer[GROUP_ID_IDX],&group_id,1);//组id
@@ -449,7 +417,8 @@
// resp_tx_en_start_u32 = phy_timer_count_get()+US_TO_PHY_TIMER_COUNT(20*rec_nearbase_num+POLL_RX_TO_RESP_TX_DLY_US+ancrec_nearbasepos*DELAY_BETWEEN_TWO_FRAME_UUS);//后面的需要根据已有基站数量进行更改，如果是抢占自己最后一个回复，要有底数
// //这里应该有问题问一下钟工
// }//此处设置绝对时间将poll u32改为phy_timer_count_get()
- resp_tx_en_start_u32 = poll_rx_en_start_u32+US_TO_PHY_TIMER_COUNT(POLL_RX_TO_RESP_TX_DLY_US);
+ position=ancrec_nearbasepos;
+ resp_tx_en_start_u32 = poll_rx_en_start_u32+US_TO_PHY_TIMER_COUNT(POLL_RX_TO_RESP_TX_DLY_US)+ancrec_nearbasepos*US_TO_PHY_TIMER_COUNT(DELAY_BETWEEN_TWO_FRAME_UUS);//加入帧间隔
resp_tx_ts_i64 = ranging_tx_time_correct(resp_tx_en_start_u32 + phy_shr_duration());//修正时间戳
/* Write all timestamps in the final message. See NOTE 8 below. */
resp_msg_set_ts(&send_buffer[RESP_MSG_POLL_RX_TS_IDX], poll_rx_ts_i64);
@@ -458,9 +427,12 @@
temp_resp_i64=resp_tx_ts_i64;
temp_count3= phy_timer_count_get();
flag_temp2=uwb_tx(send_buffer, 40,1 ,resp_tx_en_start_u32);//立即发送测试size大小
- temp_count1=phy_timer_count_get();
+ tagofflinetime[taglist_pos] = 0;//更新标签通信
+// temp_count1=phy_timer_count_get();
//while(mac_is_busy());
- gpio_pin_clr(SCL_PIN);
+ //gpio_pin_clr(SCL_PIN);
+
+
}
uint16_t uwb_searchcount;
@@ -519,84 +491,62 @@
// update_led_power_state();//更新等状态防止震动卡死在搜索
}
}
-uint16_t g_com_receive_id;
+
void CloseUWB(void)
{
uwb_rx_force_off(1);
uwb_rx_flag=0;
- LOG_INFO(TRACE_MODULE_APP,"关闭uwb_rx\r\n");
+// LOG_INFO(TRACE_MODULE_APP,"关闭uwb_rx\r\n");
}
void OpenUWB(void)
{
flag_temp1=uwb_rx(0, 0,range_timeout_us);//提交接收请求
uwb_rx_flag=1;
- LOG_INFO(TRACE_MODULE_APP,"打开uwb_rx\r\n");
+// LOG_INFO(TRACE_MODULE_APP,"打开uwb_rx\r\n");
}
void UWBOneSecondTask(void)
{
uwb_losttimer++;
+ TagListUpdate();
+ if(uwb_losttimer>g_com_map[UWB_RNAGE_TIME])
+ uwb_losttimer=g_com_map[UWB_RNAGE_TIME]+1;//防止溢出
}
+uint8_t uwbsend[200];
+extern uint32_t maintime;
void UWBIdleTask(void)
{
- if(HIDO_TimerGetTick()-uwbtasktimer >=1)
+ if(maintime-uwbtasktimer >=1)
{
- uwbtasktimer = HIDO_TimerGetTick();
+ uwbtasktimer = maintime;
UWBOneSecondTask();
+// uwbsend[0]=0x55;
+// uwbsend[1]=0xaa;
+// uwbsend[2]=0x40;
+// uwbsend[3]=taglist_num;
+// memcpy(&uwbsend[4],&tagid_list,taglist_num*2);
+// memcpy(&uwbsend[4+taglist_num*2],&tagdist_list,taglist_num*2);
+// memcpy(&uwbsend[4+taglist_num*4],&anchordata_version,taglist_num*2);
+// uart_send(UART_ID0, uwbsend,taglist_num*6+4, NULL);
+// for(int i=0;i<anchordata_num;i++)
+// {
+// LOG_INFO(TRACE_MODULE_APP,"当前测距基站ID:%x,距离:%d.\r\n",anchordata_id[i],anchordata_dist[i]);
+// }
}
}
int uwb_app_poll(void)
{
- switch(wltag_state)
- {
- case RANGE:
- if(HIDO_TimerGetTick()-wltag_uwbtimer>2&&uwb_rx_flag==0)
- {
- wltag_uwbtimer = HIDO_TimerGetTick();
- OpenUWB();
- }
- else if(HIDO_TimerGetTick()-wltag_uwbtimer>1&&uwb_rx_flag==1)
- {
- wltag_uwbtimer = HIDO_TimerGetTick();
- CloseUWB();
- }
- if(uwb_losttimer>g_com_map[UWB_RNAGE_TIME])
- {
- wltag_statetimer = HIDO_TimerGetTick();
- if(uwb_rx_flag==0)//若要切换到搜索模式时没有开启则开启UWB
- {
- OpenUWB();
- }
- wltag_state = SEARCH;
- }
- break;
- case SEARCH:
- if(HIDO_TimerGetTick()-wltag_statetimer>1)
- {
- wltag_statetimer = HIDO_TimerGetTick();
- wltag_state = CLOSE;
- CloseUWB();
- }
- break;
- case CLOSE:
- if(HIDO_TimerGetTick()-wltag_statetimer>g_com_map[UWB_WAIT_TIME])
- {
- wltag_statetimer = HIDO_TimerGetTick();
- wltag_state = SEARCH;
- OpenUWB();
- }
- break;
- }
UWBIdleTask();
}
int Anchor_App(void)
{
- uint8_t i;
- uint16_t tempid;
+ uint8_t i;
+ uint16_t tempid;
if(group_id==rx_buf[GROUP_ID_IDX]&&rx_buf[MESSAGE_TYPE_IDX] == MBX_POLL)//判断是否是和自己是同一组通讯的且为poll包
{ flag_recsuccess = 1;
+ wltag_state=RANGE;//成功后从search切换为range
memcpy(&g_com_receive_id,&rx_buf[TAG_ID_IDX],2);
- temp_count2=phy_timer_count_get();
+ //temp_count2=phy_timer_count_get();
uwb_losttimer=0;//成功测距清0 lost时间
frame_seq_nb2 = rx_buf[SEQUENCE_IDX];//获取包序
battary = rx_buf[BATTARY_IDX];
@@ -605,169 +555,60 @@
memcpy(rec_ancidlist,&rx_buf[FZ_NEARBASEID_INDEX],2*rec_nearbase_num);
memcpy(rec_ancdistlist,&rx_buf[FZ_NEARBASEID_INDEX+2*rec_nearbase_num],2*rec_nearbase_num);
memcpy(&rec_antdelay,&rx_buf[FZ_NEARBASEID_INDEX+rec_nearbase_num*4],2);
- for(i=0; i<rec_nearbase_num; i++)
- {
- if(rec_ancidlist[i] == dev_id)
- { temp_recdist_before_offset=rec_ancdistlist[i];
- rec_ancdistlist[i]+=(int16_t)g_com_map[DIST_OFFSET];
- PushAnchorDataArray(tag_id_recv,rec_ancdistlist[i],battary);
- }
- }
- for(i=0; i<rec_nearbase_num; i++)
- {
- memcpy(&tempid,&rx_buf[FZ_NEARBASEID_INDEX+i*2],2);
- if(tempid==dev_id)//也是比id如果有就更新没有就抢占
- {
- seize_anchor=0; //非抢占。已存在列表中
- Anchor_RecNearPoll(i);
- break;
- }
- }
+// for(i=0; i<rec_nearbase_num; i++)
+// {
+// if(rec_ancidlist[i] == dev_id)
+// { temp_recdist_before_offset=rec_ancdistlist[i];
+// rec_ancdistlist[i]+=(int16_t)g_com_map[DIST_OFFSET];
+// PushAnchorDataArray(tag_id_recv,rec_ancdistlist[i],battary);
+// }
+// }
+// for(i=0; i<rec_nearbase_num; i++)
+// {
+// memcpy(&tempid,&rx_buf[FZ_NEARBASEID_INDEX+i*2],2);
+// if(tempid==dev_id)//也是比id如果有就更新没有就抢占
+// {
+// seize_anchor=0; //非抢占。已存在列表中
+// Anchor_RecNearPoll(i);
+// break;
+// }
+// }
- if(i==rec_nearbase_num)
- {
- seize_anchor=1; //抢占anchor
- Anchor_RecNearPoll(i);
- }
- }else{
- OpenUWB();//接收到不是自己的包再次开启UWB接收
+// if(i==rec_nearbase_num)
+// {
+// seize_anchor=1; //抢占anchor
+// Anchor_RecNearPoll(i);
+// }
+ taglist_pos=CmpTagInList(tag_id_recv);
+ if(taglist_num>=ANC_MAX_NUM)
+ return 0;
+ for(i=0; i<rec_nearbase_num; i++)
+ {
+ memcpy(&tempid,&rx_buf[FZ_NEARBASEID_INDEX+i*2],2);
+ if(tempid==dev_id)
+ {
+ Anchor_RecNearPoll(i);
+ tagdist_list[taglist_pos]=rec_ancdistlist[i];
+ anchordata_bat[taglist_pos] = battary;//保存该基站电量
+// anchordata_version[taglist_pos] = battary;//保存该基站版本号
+ memcpy(& anchordata_version[taglist_pos],&rx_buf[7],2);
+ if(taglist_pos==taglist_num)// taglist_pos==taglist_num 说明这个基站不在当前列表中
+ { //tempid==dev_id 说明基站下发测距报文有这个标签的信息
+ taglist_num++; //满足上述两种情况才会添加基站ID进入列表中，否则会出现标签不在基站列表中，标签也不响应的情况
+ tagid_list[taglist_pos] = tag_id_recv;
+
+ }
+ break;
+ }
+ }
+ if((i==rec_nearbase_num&&taglist_pos==taglist_num)||(rec_nearbase_num==0&&!ExistInTagList(tag_id_recv)))//当基站不在标签列表中，标签也不在基站列表中时，随机找个时间片回复基站。
+ {
+ Anchor_RecNearPoll(rec_nearbase_num);
+ }
}
-
}
int UwbRange(void)
{
- uint8_t i;
- uint16_t tempid;
- // The following peripherals will be initialized in the uwb_open function
- // phy/mac/aes/lsp/phy timers initialized
- //uwb_open();
-
-// // Set calibration parameters
-// uwb_calibration_params_set(config.phy_cfg.ch_num);
-
-// // set advanced parameters
-// struct PHY_ADV_CONFIG_T adv_config = {
-// .thres_fap_detect = 40,
-// .nth_scale_factor = 4,
-// .ranging_performance_mode = 0,
-// .skip_weakest_port_en = 0,
-// };
-// phy_adv_params_configure(&adv_config);
-
-// // uwb configure
-// uwb_configure(config.phy_work_mode, board_param.tx_power_fcc[CALIB_CH(config.phy_cfg.ch_num)], &config.phy_cfg);
-
-// ranging_frame_type_set(config.phy_cfg.sts_pkt_cfg);
-
- // Register rx interrupt callback function
- //mac_register_process_handler(tx_int_callback, rx_int_callback);
-
- receive_flag = 0;
- flag_recsuccess = 0;
- temp_count3=phy_timer_count_get();
- gpio_pin_set(SCL_PIN);
- sts_lsp_store();
- flag_temp1=uwb_rx(0, 0, range_timeout_us);//开启接收
-
- // while(mac_is_busy());
- // temp_count2=phy_timer_count_get();
- start_receive_count=phy_timer_count_get();
- poll_timeout=US_TO_PHY_TIMER_COUNT(range_timeout_us);//多一个多0.4ms默认0.4ms计算为0.125*4*100000,默认开启1mss
- end_receive_count=start_receive_count+poll_timeout;
- if(end_receive_count>=UINT32_MAX)
- {end_receive_count-=UINT32_MAX;}
- current_count=phy_timer_count_get();
- while(current_count<end_receive_count||current_count>end_receive_count+HALF_SECOND_TIME)//循环接受包体,若为124.8K则是+62400000
- {
- current_count=phy_timer_count_get();
- while(mac_is_busy())
- {
- Calibration_Time();
- IdleTask();
- current_count=phy_timer_count_get();
- if(current_count>end_receive_count&¤t_count<end_receive_count+HALF_SECOND_TIME)
- {
- break;
- }
- }
- sts_lsp_store_stop();
-
-
- if(receive_flag==1)//成功接收
- {
-
- //if(group_id==rx_buf[GROUP_ID_IDX]&&rx_buf[MESSAGE_TYPE_IDX] == MBX_POLL&&!memcmp(&rx_buf[TAG_ID_IDX],&g_com_map[BIND_DEV_ID],2))//判断是否是和自己是同一组通讯的且为poll包
- if(group_id==rx_buf[GROUP_ID_IDX]&&rx_buf[MESSAGE_TYPE_IDX] == MBX_POLL)//判断是否是和自己是同一组通讯的且为poll包
- { flag_recsuccess = 1;
- memcpy(&g_com_receive_id,&rx_buf[TAG_ID_IDX],2);
-// sleep_timer_start(__MS_TO_32K_CNT(UWB_DELAY_TIME_US));//测试
- temp_count2=phy_timer_count_get();
- frame_seq_nb2 = rx_buf[SEQUENCE_IDX];//获取包序
- battary = rx_buf[BATTARY_IDX];
- rec_nearbase_num=rx_buf[FZ_NEARBASENUM_INDEX]; //标签传过来的他与基站交互的基站id数目
- memcpy(&tag_id_recv,&rx_buf[TAG_ID_IDX],2);
- memcpy(rec_ancidlist,&rx_buf[FZ_NEARBASEID_INDEX],2*rec_nearbase_num);
- memcpy(rec_ancdistlist,&rx_buf[FZ_NEARBASEID_INDEX+2*rec_nearbase_num],2*rec_nearbase_num);
- memcpy(&rec_antdelay,&rx_buf[FZ_NEARBASEID_INDEX+rec_nearbase_num*4],2);
- for(i=0; i<rec_nearbase_num; i++)
- {
- if(rec_ancidlist[i] == dev_id)
- { temp_recdist_before_offset=rec_ancdistlist[i];
- rec_ancdistlist[i]+=(int16_t)g_com_map[DIST_OFFSET];
- PushAnchorDataArray(tag_id_recv,rec_ancdistlist[i],battary);
- }
- }
- for(i=0; i<rec_nearbase_num; i++)
- {
- memcpy(&tempid,&rx_buf[FZ_NEARBASEID_INDEX+i*2],2);
- if(tempid==dev_id)//也是比id如果有就更新没有就抢占
- {
- seize_anchor=0; //非抢占。已存在列表中
- Anchor_RecNearPoll(i);
- break;
- }
- }
-
- if(i==rec_nearbase_num)
- {
- seize_anchor=1; //抢占anchor
- Anchor_RecNearPoll(i);
- }
- recev_error_num=0;
- //range_timeout_us=5000;//恢复为5000进入range后
- //LOG_INFO(TRACE_MODULE_APP,"标签ID：%X,距离: %d 包序%d\r\n",g_com_receive_id,distance,frame_seq_nb2);
-
-
- gpio_pin_clr(SCL_PIN);
- //break;去掉break变为一对多
- }
- }
- sts_lsp_store();
-
- break;
- //失败或者接受被高发射机打断都会再次开启接收
- //flag_temp1=uwb_rx(0, 0, range_timeout_us);
- }
- delay_us(1);
- sts_lsp_store_stop();
- uwb_rx_force_off(1);
-
-// if(!flag_recsuccess)
-// {
-// //sleep_timer_start(__MS_TO_32K_CNT(UWB_DELAY_TIME_US-3));//测试
-// //LOG_INFO(TRACE_MODULE_APP,"测距失败，计数：%d\r\n",recev_error_num);
-// if(recev_error_num++>5)
-// {
-// recev_error_num=0;
-// UWB_work_state=SEARCH_DEV;
-// uwb_searchcount = 0;
-// search_open_flag = 1;
-// }
- //}
-
-
-
- return 0;
}
void Uwb_init(void)
{
@@ -802,7 +643,7 @@
// uwb configure
uwb_configure(config.phy_work_mode, board_param.tx_power_fcc[CALIB_CH(config.phy_cfg.ch_num)], &config.phy_cfg);
- #ifdef STS_MODE
+ #if (defined STS_MODE) || (defined MK_MODE)
ranging_lib_init();
#endif
ranging_frame_type_set(config.phy_cfg.sts_pkt_cfg);
@@ -815,219 +656,5 @@
phy_rx_sts_switch_mode_set(config.phy_cfg.sts_pkt_cfg, STS_SWITCH_EVERY_4SYM, 0, 0);
#endif
mac_register_process_handler(tx_int_callback, rx_int_callback);//初始化回调
-}
-//主函数绑定接受逻辑
-int UwbSearch(void)
-{
- uint8_t i;
- uint16_t tempid;
- // The following peripherals will be initialized in the uwb_open function
- // phy/mac/aes/lsp/phy timers initialized
- uwb_open();
- #ifdef STS_MODE
- // Set STS key and IV
- phy_sts_key_configure(&sts_iv_key);
-
- // which RX ports will be used for AoA/PDoA
- phy_rx_ant_mode_set(RX_ANT_PORTS_COMBINATION);
- #endif
- // Set calibration parameters
- uwb_calibration_params_set(config.phy_cfg.ch_num);
-
- #ifndef STS_MODE
- // set advanced parameters
- struct PHY_ADV_CONFIG_T adv_config = {
- .thres_fap_detect = 40,
- .nth_scale_factor = 4,
- .ranging_performance_mode = 0,
- .skip_weakest_port_en = 0,
- };
- #else
- // set advanced parameters
- struct PHY_ADV_CONFIG_T adv_config = {
- .thres_fap_detect = 40,
- .nth_scale_factor = 4,
- .ranging_performance_mode = 3,
- .skip_weakest_port_en = 0,
- };
- #endif
- phy_adv_params_configure(&adv_config);
-
- // uwb configure
- uwb_configure(config.phy_work_mode, board_param.tx_power_fcc[CALIB_CH(config.phy_cfg.ch_num)], &config.phy_cfg);
-
- #ifdef STS_MODE
- ranging_lib_init();
- #endif
- ranging_frame_type_set(config.phy_cfg.sts_pkt_cfg);
-
- #ifdef STS_MODE
- aoa_aux_info_set(AOA_AUX_ANT_IQ_RSSI_PDOA_AOA_FOM);
- aoa_steering_vector_set((const float *)((uint32_t)((config.phy_cfg.ch_num == 9) ? svec_ch9_ptr : svec_ch5_ptr) | SRAM_BASE));
-
- aoa_param_config();
-
- phy_rx_sts_switch_mode_set(config.phy_cfg.sts_pkt_cfg, STS_SWITCH_EVERY_4SYM, 0, 0);
- #endif
- // Register rx interrupt callback function
- mac_register_process_handler(tx_int_callback, rx_int_callback);
-
- receive_flag = 0;
- temp_count3=phy_timer_count_get();
- gpio_pin_set(SCL_PIN);
- sts_lsp_store();
- flag_temp2=uwb_rx(0, 0, RX_SYNC_WIN_US_TEMP);//开启接收
- start_receive_count=phy_timer_count_get();
- poll_timeout=US_TO_PHY_TIMER_COUNT(2000000);//多一个多0.4ms默认0.4ms计算为0.125*4*100000,默认开启1mss
- end_receive_count=start_receive_count+poll_timeout;
- if(end_receive_count>=UINT32_MAX)
- {
- end_receive_count-=UINT32_MAX;
- }
- current_count=phy_timer_count_get();
- while(current_count<end_receive_count||current_count>end_receive_count+HALF_SECOND_TIME)//循环接受包体,若为124.8K则是+62400000
- {
- while(mac_is_busy())
- {
- IdleTask();
- current_count=phy_timer_count_get();
- if(current_count>end_receive_count&¤t_count<end_receive_count+HALF_SECOND_TIME)
- {
- break;
- }
- }
- sts_lsp_store_stop();
-
-
- temp_count2=phy_timer_count_get();
- if(receive_flag==1)//成功接收
- {
-// if(group_id==rx_buf[GROUP_ID_IDX]&&rx_buf[MESSAGE_TYPE_IDX] == MBX_POLL&&!memcmp(&rx_buf[TAG_ID_IDX],&g_com_map[BIND_DEV_ID],2))//判断是否是和自己是同一组通讯的且为poll包
- if(group_id==rx_buf[GROUP_ID_IDX]&&rx_buf[MESSAGE_TYPE_IDX] == MBX_POLL)//判断是否是和自己是同一组通讯的且为poll包
- {
- sleep_timer_start(__MS_TO_32K_CNT(UWB_DELAY_TIME_US-13));//测试
- range_timeout_us=20000;//将下次range开启后超时时间设为20ms之后再range里恢复
- temp_count2=phy_timer_count_get();
- frame_seq_nb2 = rx_buf[SEQUENCE_IDX];//获取包序
- battary = rx_buf[BATTARY_IDX];
- rec_nearbase_num=rx_buf[FZ_NEARBASENUM_INDEX]; //标签传过来的他与基站交互的基站id数目
- memcpy(&tag_id_recv,&rx_buf[TAG_ID_IDX],2);
- memcpy(rec_ancidlist,&rx_buf[FZ_NEARBASEID_INDEX],2*rec_nearbase_num);
- memcpy(rec_ancdistlist,&rx_buf[FZ_NEARBASEID_INDEX+2*rec_nearbase_num],2*rec_nearbase_num);
- memcpy(&rec_antdelay,&rx_buf[FZ_NEARBASEID_INDEX+rec_nearbase_num*4],2);
- for(i=0; i<rec_nearbase_num; i++)
- {
- if(rec_ancidlist[i] == dev_id)
- {
- temp_recdist_before_offset=rec_ancdistlist[i];
- rec_ancdistlist[i]+=(int16_t)g_com_map[DIST_OFFSET];
- PushAnchorDataArray(tag_id_recv,rec_ancdistlist[i],battary);
- }
- }
- for(i=0; i<rec_nearbase_num; i++)
- {
- memcpy(&tempid,&rx_buf[FZ_NEARBASEID_INDEX+i*2],2);
- if(tempid==dev_id)//也是比id如果有就更新没有就抢占
- {
- seize_anchor=0; //非抢占。已存在列表中
- Anchor_RecNearPoll(i);
- break;
- }
- }
-
- if(i==rec_nearbase_num)
- {
- seize_anchor=1; //抢占anchor
- Anchor_RecNearPoll(i);
- }
-
- gpio_pin_clr(SCL_PIN);//测试
- LOG_INFO(TRACE_MODULE_APP,"标签ID：%X,距离: %d 信号强度ANT0:%f,信号强度ANT2: %f\r\n",g_com_map[BIND_DEV_ID],distance,sts_rssi[0],sts_rssi[2]);
- return 1;//返回发送成功标志
- }
-
- }
- temp_count3=phy_timer_count_get();
- sts_lsp_store();
- flag_temp2=uwb_rx(0, 0, RX_SYNC_WIN_US_TEMP);//再次开启接收
- }
- delay_us(2);
- sts_lsp_store_stop();
- uwb_rx_force_off(1);
- // LOG_INFO(TRACE_MODULE_APP,"超时定时器：%x,%x,%x\r\n",start_receive_count,end_receive_count,current_count);
- gpio_pin_clr(SCL_PIN);//测试
- return 0;//返回绑定失败标志
-}
-//}
-
-#define SEARCH_TIMESTEMP 20
-void UWBPoll(void)
-{
- switch(UWB_work_state)
- {
- case LINK_SUCCESS:
- { //连接成功进行轮询测距
-
- uwb_led_on();
- UwbRange();
- uwb_led_off();
-
- }
- break;
- case SEARCH_DEV:
- {
- UWB_work_state=LINK_SUCCESS;
- Uwb_init();
-// //接包不成功或者通讯失败进入搜索模式
-// if(search_open_flag)
-// {
-// LOG_INFO(TRACE_MODULE_APP,"开启搜索\r\n");
-// search_open_flag=0;
-// uwb_led_on();
-// link_success_flag=UwbSearch();//第一次开启接收2s绑定失败后则进行下面1分钟后重新开启2s绑定流程
-// uwb_led_off();
-// if(link_success_flag)
-// UWB_work_state=LINK_SUCCESS;
-// }else{
-// LOG_INFO(TRACE_MODULE_APP,"等待进入搜索模式：%d\r\n",SEARCH_TIMESTEMP-uwb_searchcount);
-// }
-
- }
- break;
- case UN_BIND:
- {
- uwb_led_off();//关闭uwb指示灯
- }
- break;
- }
- if(UWB_work_state==LINK_SUCCESS)
- { //成功时清0错误计数
- uwb_searchcount=0;
- }
- if(UWB_work_state==SEARCH_DEV)
- {
- if(!search_open_flag)
- {
- if(uwb_searchcount++>SEARCH_TIMESTEMP)
- {
- uwb_searchcount=0;
- search_open_flag=1;
- }
- }
- //link_error_count+=g_com_map[COM_INTERVAL];
- //if(link_error_count>=g_com_map[4G_INTERNAL])
- //link_error_count=0;
- // update_led_power_state();//更新灯状态
- }
- //LOG_INFO(TRACE_MODULE_APP,"UWB状态：%d\r\n",UWB_work_state);
-}
-
-uint8_t GetUWBBindState(void)
-{
- if(UWB_work_state == UN_BIND)
- {
- return 0;
- }
- return 1;
}
--
Gitblit v1.9.3