From 62f6fe8e906f8c17493d154f5567ba8a7ab4c0cf Mon Sep 17 00:00:00 2001
From: chen <15335560115@163.com>
Date: 星期四, 26 六月 2025 18:13:38 +0800
Subject: [PATCH] 注释掉了串口逻辑，加入了与蓝牙串口通信逻辑，能够修改参数，但网关下发配置会出现hardfault未解决
---
keil/include/main/main.c | 76 ++++++++++++++++++++++++++++----------
1 files changed, 56 insertions(+), 20 deletions(-)
diff --git a/keil/include/main/main.c b/keil/include/main/main.c
index 0eaf7bf..63c43e5 100644
--- a/keil/include/main/main.c
+++ b/keil/include/main/main.c
@@ -118,6 +118,7 @@
uint8_t group_id,enable_sleep_count;
uint32_t dev_id;
uint16_t disoffset;
+uint16_t set_mk_time;
uint8_t flag_sleeptimer,flag_secondtask,secondtask_count;
float nomove_count;
// Default pool descriptor.
@@ -170,7 +171,11 @@
port = g_com_map[TCP_PORT];
g_com_map[VERSION] = (1<<8)|0;
LOG_INFO(TRACE_MODULE_APP,"设备ID: %x .\r\n",dev_id);
- LOG_INFO(TRACE_MODULE_APP,"固件版本:MK_Air_tag_免布线模式 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+// if(gpio_pin_get_val(MODE_CHANGE_PIN))
+// LOG_INFO(TRACE_MODULE_APP,"固件版本:MK_Air_tag模式 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+// else{
+// LOG_INFO(TRACE_MODULE_APP,"固件版本:MK_免布线模式 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+// }
LOG_INFO(TRACE_MODULE_APP,"服务器地址: %d.%d.%d.%d:%d.\r\n",ip0,ip1,ip2,ip3,port);
}
void MinuteTask(void)
@@ -300,14 +305,15 @@
// Configure IO_04 for RF Switch
gpio_pin_set_dir(IO_PIN_4, GPIO_DIR_OUT, 0);
#else
- Program_Init();
+
spi_init();
- // 模式判断脚和spi nrst脚初始化
+// // 模式判断脚和spi nrst脚初始化
board_mode_pin_init();
-// board_led_on(BOARD_LED_1);
+ Program_Init();
+ //board_led_on(BOARD_LED_1);
#endif
Board_LORA_NVIC_Init(Lora_irq_handler);
- board_configure();
+// board_configure();
}
void app_process_handle(uint8_t msg_id, const void *param)
@@ -346,6 +352,18 @@
}
uint8_t bat_percent;
uint8_t stationary_flag;
+extern uint8_t send_flag;
+extern uint8_t txdone;
+void mcu_deep_sleep(void)
+{
+ uint32_t lock;
+ trace_flush();
+
+ lock = int_lock();
+ sleep_timer_stop();
+ power_enter_power_down_mode(1);
+ int_unlock(lock);
+}
int main(void)
{
// Initialize MCU system
@@ -353,10 +371,12 @@
// Disable watchdog timer
wdt_close(WDT_ID0);
LOG_INFO(TRACE_MODULE_APP, "UCI FiRa example\r\n");
- if(gpio_pin_get_val(MODE_CHANGE_PIN))
+
+ if(gpio_pin_get_val(SLEEP_PIN))
{
-
-
+ if(gpio_pin_get_val(MODE_CHANGE_PIN))//记得改回来与正式的相反
+ {
+ LOG_INFO(TRACE_MODULE_APP,"固件版本:MK_Air_tag模式 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
// Platform init for WSF
PalSysInit();
@@ -452,16 +472,16 @@
while (1)
{
wsfOsDispatcher();
-#ifdef MY_MODE
- if(normal_flag)
- {
- IdleTask();
- }
-#endif
power_manage();
+ if(!gpio_pin_get_val(SLEEP_PIN))
+ {
+ gpio_pin_clr(LORA_NRST);//lora休眠
+ LOG_INFO(TRACE_MODULE_APP, "进入休眠模式\r\n");
+ mcu_deep_sleep();
+ }
}
- }else{
-
+ }else{
+ LOG_INFO(TRACE_MODULE_APP,"固件版本:MK_免布线模式 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
uart0_Init_normal();
Lora_1268_Init();
SwitchLoraSettings(478,7,22);
@@ -474,9 +494,12 @@
sleep_timer_start(__MS_TO_32K_CNT(SLEEP_TIMER_NUM));//测试
while (1)
{
+ if(send_flag)
+ {
+ LOG_INFO(TRACE_MODULE_APP,"发送数量%d. \r\n",txdone);
+ send_flag=0;
+ }
uwb_app_poll();//我们的测距逻辑
-
-
if(flag_secondtask)
{
flag_secondtask = 0;
@@ -484,11 +507,24 @@
//Lora_Tx_Poll();
}
Lora_Tx_Poll();
-
+ if(!gpio_pin_get_val(SLEEP_PIN))
+ {
+ //gpio_pin_clr(LORA_NRST);//lora休眠
+ LOG_INFO(TRACE_MODULE_APP, "进入休眠模式\r\n");
+ mcu_deep_sleep();
+ }
IdleTask();
}
}
-
+}else{
+//delay_ms(300);
+ LOG_INFO(TRACE_MODULE_APP, "进入休眠模式\r\n");
+ //gpio_pin_clr(LORA_NRST);//lora休眠
+// spi_close(SPI_ID0);
+ //lora_in_sleep();
+ power_init();
+ mcu_deep_sleep();
+}
}
void app_restore_from_power_down(void)
--
Gitblit v1.9.3