From 753f1e274931177b6daeb391cc4307439aaa6553 Mon Sep 17 00:00:00 2001
From: zhangbo <zhangbo@qq.com>
Date: 星期五, 25 七月 2025 11:27:39 +0800
Subject: [PATCH] 修改电流检测逻辑，现在是1分钟检测一次，然后检测到低电量后会检测10次才会关机，V2.14
---
keil/include/main/main.c | 49 ++++++++++++++++++++++++++++++-------------------
1 files changed, 30 insertions(+), 19 deletions(-)
diff --git a/keil/include/main/main.c b/keil/include/main/main.c
index 22c3856..c75b424 100644
--- a/keil/include/main/main.c
+++ b/keil/include/main/main.c
@@ -181,7 +181,7 @@
{
bat_percent = 0;
}
- else if(fVoltage_mv > 4200)
+ else if(fVoltage_mv > 4100)
{
bat_percent = 100;
}
@@ -317,15 +317,21 @@
keystarttime2 = HIDO_TimerGetTick();
}
}
+uint8_t guanjiflag_count=0;
void MinuteTask(void)
{
PCA9555_Set_One_Value_Output(ADC_MINIUS,0);//拉低
delay_ms(100);
adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
+ if(bat_percent<1)
+ {
+ guanjiflag_count++;
+ }
+
}
void SecondTask(void)
{ static uint8_t second_count;
- if(second_count++>120)
+ if(second_count++>60)
{
second_count = 0;
MinuteTask();
@@ -409,7 +415,7 @@
input5v_time=1;
flag_secondtask = 1;
led_flag=1;
- if(g_com_map[UWBFrequency]>1)
+ if(g_com_map[UWBFrequency]>1||current_state==STATE_SLEEP)
{
uwb_time_count++;
}
@@ -435,7 +441,7 @@
}
input5v_time=1;
- if(taglist_num==0&&g_com_map[UWBFrequency]==1&&g_com_map[UWBENBLE]==1&&uwb_OpenClose_flag==1)
+ if(taglist_num==0&&g_com_map[UWBFrequency]==1&&g_com_map[UWBENBLE]==1&&uwb_OpenClose_flag==1&¤t_state == STATE_NORMAL)
{
CloseUWB();
Uwb_init();
@@ -581,7 +587,7 @@
g_com_map[MODBUS_MODE] = 0;
log_4g_enable_flag =1;//g_com_map[LOG_4G_ENABLE];
- g_com_map[VERSION] = (2<<8)|10;
+ g_com_map[VERSION] = (2<<8)|14;
LOG_INFO(TRACE_MODULE_APP,"设备ID: %x .\r\n",dev_id);
@@ -763,15 +769,15 @@
// uart1_change_from_debug_to_gps();//测试
// PCA9555_Set_One_Value_Output(MCU_A,0);//输出低电平切换为GPS
//保留串口输出到debug口这样可以看到看门狗的复位
- //关闭电源前检查PCA输出脚的电平保证不供电在关闭电源脚
- PCA9555_Set_One_Value_Output(LED_POWER,0);//输出低电平关闭LED
- PCA9555_Set_One_Value_Output(TTS_ENABLE,0);
- PCA9555_Set_One_Value_Output(AIR780E_ENBALE,0);
- PCA9555_Set_One_Value_Output(GPS_POWER,0);//关GPS
- delay_ms(200);
+// //关闭电源前检查PCA输出脚的电平保证不供电在关闭电源脚
+// PCA9555_Set_One_Value_Output(LED_POWER,0);//输出低电平关闭LED
+// PCA9555_Set_One_Value_Output(TTS_ENABLE,0);
+// PCA9555_Set_One_Value_Output(AIR780E_ENBALE,0);
+// PCA9555_Set_One_Value_Output(GPS_POWER,0);//关GPS
+// delay_ms(200);
- PCA9555_Set_One_Value_Output(PWR_ENABLE,0);//低电平关闭
-
+// PCA9555_Set_One_Value_Output(PWR_ENABLE,0);//低电平关闭
+ PCA9555_Close_Power();
}
}
@@ -800,7 +806,7 @@
{
WT588E_PLAY(14);
}
- if(bat_percent<1&&bat_percent_only_one&&jiancebat_percent_flag)
+ if(bat_percent<1&&bat_percent_only_one&&jiancebat_percent_flag&&(guanjiflag_count>9))
{
WT588E_PLAY(15);
userkey_state=3;
@@ -818,11 +824,12 @@
Set4LEDColor(uwbled,rtkled,led4g,powerled);
if(HIDO_TimerGetTick() - guanjiflagtime>3)
{
- PCA9555_Set_One_Value_Output(TTS_ENABLE,0); //关闭语音输入
- PCA9555_Set_One_Value_Output(LED_POWER,0); //输出低电平关闭LED
- PCA9555_Set_One_Value_Output(AIR780E_ENBALE,0);
- PCA9555_Set_One_Value_Output(GPS_POWER,0); //关GPS
- PCA9555_Set_One_Value_Output(PWR_ENABLE,0); //低电平关闭
+// PCA9555_Set_One_Value_Output(TTS_ENABLE,0); //关闭语音输入
+// PCA9555_Set_One_Value_Output(LED_POWER,0); //输出低电平关闭LED
+// PCA9555_Set_One_Value_Output(AIR780E_ENBALE,0);
+// PCA9555_Set_One_Value_Output(GPS_POWER,0); //关GPS
+// PCA9555_Set_One_Value_Output(PWR_ENABLE,0); //低电平关闭
+ PCA9555_Close_Power();
}
}
@@ -847,6 +854,7 @@
uint8_t GPS_UPLOAD_FLAG=0;
uint32_t elapsed_time_jibu;
extern uint8_t uwb_OpenClose_flag;
+uint8_t uwb_close_count,uwb_close_count1;
void upload_apppoll()
{
@@ -880,6 +888,7 @@
case UWB_OPEN_COUNT:
CloseUWB();
UWBSendUDPTask();
+// uwb_close_count++;
break;
case UWB_MEASUREMENT_INTERVAL_SLEEP:
@@ -888,6 +897,7 @@
Uwb_init();
OpenUWB();
state_start_time = uwb_time_count;
+// uwb_close_count1++;
break;
}
}
@@ -1069,6 +1079,7 @@
}
IMUTask();
IdleTask();
+// PCA9555_low_power_consumption();
check_step_and_update_state();
led_offtask();
}
--
Gitblit v1.9.3