From 8f5623ddd7fd3b12561a37a81639575559cf305b Mon Sep 17 00:00:00 2001
From: chen <15335560115@163.com>
Date: 星期四, 26 十二月 2024 15:47:50 +0800
Subject: [PATCH] V1.14版本，新增查询强制定位开启标志位和下发配置gps刷新频率功能
---
keil/include/main/main.c | 518 +++++++++++++++++++++++++++++++++++++++++++++++---------
1 files changed, 430 insertions(+), 88 deletions(-)
diff --git a/keil/include/main/main.c b/keil/include/main/main.c
index f696d42..413d2cd 100644
--- a/keil/include/main/main.c
+++ b/keil/include/main/main.c
@@ -76,7 +76,8 @@
#define WARING_LIMIT_TIME 10
#define UPDATE_TIME 10
-
+#define VIBRATION_TIME 1 //单位500ms
+#define NO_VIBRATION_TIME 20 //15s
extern uint8_t mUsartReceivePack[100];
extern uint8_t mUsart2ReceivePack[150];
extern uint8_t state5V_prase_flag,gps_prase_flag;
@@ -91,12 +92,14 @@
uint8_t bat_percent,g_start_send_flag=1;
uint8_t link_success_flag,motor_count;
uint16_t gps_wait_count;
-uint8_t state5v;
-uint8_t motor_power_state=1,uwb_state,air780_power_state,gps_success_state,chaging_state,changed_state,air780_success_state,first_motor_in_flag;
+extern uint8_t gps_timeout_flag;
+uint8_t state5v = 1;
+uint8_t motor_power_state=1,uwb_state,air780_power_state,gps_success_state,red_charge_state,green_charge_state,air780_success_state,first_motor_in_flag;
float nomove_count=0;
static uint32_t sample[NUM_SAMPLES] = {0};
-uint8_t recev_error_num,send_messgae_count,send_flag,control_state;
+uint8_t recev_error_num,send_messgae_count,send_flag,control_state,power_low_flag;
uint8_t flag_4g_usart_rx_state = 1; //4G 串口RX当前是 RX状态，不是GPIO状态
+int input_5v_flag,air780e_flag1,air780e_flag2,air780e_flag3,air780e_flag4;
typedef enum
{ UN_BIND=0,
LINK_SUCCESS,
@@ -106,7 +109,7 @@
Commend_SendDate send_struct;
-static struct ADC_CFG_T usr_adc_cfg = {
+struct ADC_CFG_T usr_adc_cfg = {
.mode = ADC_MODE_CONTINUE, /* Selected single conversion mode */
.clk_sel = ADC_CLK_HIGH, /* Selected 62.4M high speed clock */
.vref_sel = ADC_SEL_VREF_INT, /* Using internal reference voltage (1.2V)*/
@@ -142,9 +145,24 @@
.int_tx = false,
#endif
};
-static void uart_receive_callback(void *dev, uint32_t err_code)
+int tt1,tt2;
+void uart_receive_callback(void *dev, uint32_t err_code)
{
uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
+}
+void mcu_deep_sleep(void)
+{
+ uint32_t lock;
+ trace_flush();
+ lock = int_lock();
+ LOG_INFO(TRACE_MODULE_APP, "进入深度休眠\r\n");
+ gps_air780_power_change(0,0);//关闭gps，4G
+ sleep_timer_stop();
+ //adc_close();
+ power_enter_power_down_mode(1);
+ //LOG_INFO(TRACE_MODULE_APP, "进入深度休眠\r\n");
+ sys_reset(0);
+ int_unlock(lock);
}
static void adc_callback(void *data, uint32_t number)
{
@@ -168,7 +186,19 @@
bat_percent = ((fVoltage_mv - 3300) /8);
}
}
- LOG_INFO(TRACE_MODULE_APP, "The voltage is %%%d \r\n",bat_percent);
+ gpio_pin_set(ADC_GND_ENABLE);//在拉高
+ if(fVoltage_mv<3300)
+ {
+ power_low_flag=1;
+ gps_air780_power_change(gps_power_state,0);//gps原样，关闭4G
+ LOG_INFO(TRACE_MODULE_APP, "电池电压低于3.3V，4G，GPS,马达停止工作\r\n");
+ }else{
+ power_low_flag=0;
+ gps_air780_power_change(gps_power_state,1);//gps原样,开启4G
+ LOG_INFO(TRACE_MODULE_APP, "电池电压正常,4G，GPS,马达正常工作\r\n");
+ }
+ //tt2=gpio_pin_get_val(ADC_GND_ENABLE);
+ // LOG_INFO(TRACE_MODULE_APP, "The voltage is %%%d \r\n",bat_percent);
}
//void UartInit(void)
//{
@@ -177,11 +207,112 @@
//board_debug_console_open(TRACE_PORT_UART0);
//uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
//}
-extern gps_uwb_flag;
-uint8_t TCP_reconnect_timer,flag_TCP_reconnectting = 1;
-uint8_t gps_enable_flag,motor_open_air_flag,moter_open_uwb_flag;
+extern uint8_t gps_uwb_flag,gps_need_data_flag;
+static HIDO_UINT32 l_u32MotorPollTick = 0;
+uint8_t TCP_reconnect_timer,flag_TCP_reconnectting = 1,flag_alam_state = 0,userkey_state;
+uint32_t keystarttime,keystarttime2;
+uint8_t motor_open_flag=1;
+uint8_t gps_enable_flag,motor_open_air_flag,moter_open_uwb_flag,flag_fenli_alarm = 0,fenli_alarm_count,delaysleep_count,enbale_blink_flag;
int need_open_gps_count;
+uint8_t change_vibration=2;
+HIDO_UINT32 u32CurTick_Motor;
void MotorPoll(void)
+{
+ if(!power_low_flag)//确认是否休眠下才开启功能
+ { //马达震动逻辑
+ if(g_com_map[MOTOR_ENABLE])
+ {
+ if(motor_open_air_flag||moter_open_uwb_flag)
+ {motor_power_state=0;
+ if(motor_open_flag)
+ {
+ if (motor_count>=change_vibration)
+ {
+ change_vibration=VIBRATION_TIME;
+ motor_power_state = 1;
+ motor_count=0;
+ motor_open_flag=0;
+ update_led_power_state();
+ }
+ motor_count++;
+ }else {//修改
+ motor_power_state = 1;
+ if(motor_count>=NO_VIBRATION_TIME)
+ {
+ motor_power_state = 0;
+ motor_count=0;
+ motor_open_flag=1;
+ update_led_power_state();
+ }
+ motor_count++;
+ }
+
+
+ } else {
+ motor_open_flag=1;
+ motor_count=0;
+ motor_power_state=1;
+ }
+ }else{
+ motor_open_flag=1;
+ motor_count=0;
+ motor_power_state=1;
+ }
+ }else{
+ motor_open_flag=1;
+ motor_count=0;
+ motor_power_state=1;
+ }
+
+}
+
+void MotorPollCheck(void)
+{
+ if(!power_low_flag)//确认是否休眠下才开启功能
+ { //马达震动逻辑
+ if(g_com_map[MOTOR_ENABLE])
+ {
+ if(motor_open_air_flag||moter_open_uwb_flag)
+ {motor_power_state=0;
+ if(motor_open_flag)
+ {
+ if (motor_count>=VIBRATION_TIME)
+ {
+ motor_power_state = 1;
+ motor_count=0;
+ motor_open_flag=0;
+ update_led_power_state();
+ }
+ }else {//修改
+ motor_power_state = 1;
+ if(motor_count>=NO_VIBRATION_TIME)
+ {
+ motor_power_state = 0;
+ motor_count=0;
+ motor_open_flag=1;
+ update_led_power_state();
+ }
+ }
+
+
+ } else {
+ motor_open_flag=1;
+ motor_count=0;
+ motor_power_state=1;
+ }
+ }else{
+ motor_open_flag=1;
+ motor_count=0;
+ motor_power_state=1;
+ }
+ }else{
+ motor_open_flag=1;
+ motor_count=0;
+ motor_power_state=1;
+ }
+ update_led_power_state();
+}
+void StatusChange(void)
{
if(UWB_work_state==UN_BIND) {
gps_uwb_flag=0;//关闭GPS
@@ -190,6 +321,33 @@
} else { //绑定状态下
if(anchordata_num==1) {
if(distance<g_com_map[ALARM_DISTANCE1]) { //小于预警距离
+ fenli_alarm_count = 0;
+ if(flag_fenli_alarm)
+ {
+ flag_fenli_alarm = 0;
+ fenli_alarm_count = 0;
+ _4GAlarmUpload(2);
+ }
+ }
+ }
+ if(distance>g_com_map[ALARM_DISTANCE1]||anchordata_num==0)
+ {
+ if(fenli_alarm_count++>20)
+ {
+ if(!flag_fenli_alarm)
+ {
+ flag_fenli_alarm = 1;
+ _4GAlarmUpload(1);
+ }
+ }
+ }
+ if(distance<g_com_map[ALARM_DISTANCE1]) { //小于预警距离
+ if(flag_alam_state)
+ {
+ flag_alam_state = 0;
+
+ }
+
need_open_gps_count=0;
moter_open_uwb_flag=0;//关闭震动
gps_uwb_flag=0;//关闭GPS
@@ -197,6 +355,10 @@
need_open_gps_count++;
moter_open_uwb_flag=1;//开启震动
if(need_open_gps_count>=20) {
+ if(!flag_alam_state)
+ {
+ flag_alam_state = 1;
+ }
gps_uwb_flag=1;//开启gps测距流程
need_open_gps_count=0;
}
@@ -204,27 +366,83 @@
need_open_gps_count++;
moter_open_uwb_flag=1;//开启震动
if(need_open_gps_count>=20) {
+ if(!flag_alam_state)
+ {
+ flag_alam_state = 1;
+ }
gps_uwb_flag=1;//开启gps测距流程
need_open_gps_count=0;
}
+
+ }
+ if(anchordata_num==0) {
+ if(!flag_alam_state)
+ {
+ flag_alam_state = 1;
}
- } else if(anchordata_num==0) {
-
+ distance = 0x1ffff;
gps_uwb_flag=1;//开启gps测距流程
moter_open_uwb_flag=1;//开启震动
need_open_gps_count=0;
}
}
+ }
+void IMUTask(void)
+{
+ if(nomove_count>g_com_map[NOMOVESLEEP_TIME]&&g_com_map[IMU_ENABLE]==1)
+ { power_wakeup_enable((enum POWER_WAKEUP_SOURCE_T)ACCLERATE_DETECT_Pin, POWER_WAKEUP_LEVEL_HIGH);//配置唤醒等待进入休眠
+ mcu_deep_sleep();
+ }
+}
+void UserKeyTask(void)
+ {
+ if(!GET_USERKEY)
+ {
+ if(HIDO_TimerGetTick() - keystarttime>3)
+ {
+ userkey_state = 1;
+ keystarttime = HIDO_TimerGetTick();
+ TCPHeartBeatUpload();//立即上传该包
+ }
+ if(HIDO_TimerGetTick() - keystarttime2>10)
+ {
+ g_com_map[CNT_RESTART] = 1;
+ }
+ }else
+ {
+ keystarttime = HIDO_TimerGetTick();
+ keystarttime2 = HIDO_TimerGetTick();
+ }
+ }
+void MinuteTask(void)
+{ gpio_pin_clr(ADC_GND_ENABLE);//先拉低
+ adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
}
void SecondTask(void)
-{
+{static uint8_t second_count;
+ if(second_count++>60)
+ {
+ second_count = 0;
+ MinuteTask();
+ }
//UWB更新列表
TagListUpdate();
+ if(!power_low_flag)
+ {
GPS_Poll();
- g_com_map[ALARM_DISTANCE1]=30;//测试
- g_com_map[ALARM_DISTANCE2]=40;
+ //gps_power_state=1;//常开GPS
+ }else{
+ gps_power_state=0;//关闭GPS
+ update_led_power_state();
+ //初始化GPS计数数据
+ gps_need_data_flag=1;
+ gps_wait_count=0;
+ gps_timeout_flag=0;
+ }
+ //gps_power_state=1;//测试gps长开
//UWB状态检测
-
+if(!power_low_flag)//低供电下不需要检测重连
+ {
if(IfTCPConnected())
{
TCP_reconnect_timer =0;
@@ -242,15 +460,38 @@
}
}
+ }
HIDO_TimerTick();
+ if(nomove_count<=g_com_map[NOMOVESLEEP_TIME])//防止溢出
nomove_count++;
+ else{
+ nomove_count=g_com_map[NOMOVESLEEP_TIME]+1;
+ }
}
-uint8_t flag_sleeptimer,flag_secondtask,secondtask_count;
+uint8_t tt=1;
+uint8_t flag_sleeptimer,flag_secondtask,secondtask_count,log_4g_enable_flag;
+uint8_t uwb_enable_flag=0;
+uint8_t enable_system_function_flag;
+
static void sleep_timer_callback(void *dev, uint32_t time)
{
- IO_control_init();
+ // IO_control_init();
+
+ if(enbale_blink_flag)
+ {
+ green_charge_state=0;
+ charge_red_on();
+ }
+
+ if(tt)
UWBPoll();
- // MotorPoll();
+ //车载poll
+ UWB_Tag_Poll();
+
+ StatusChange();
+
+ MotorPoll();
+ update_led_power_state();
if(secondtask_count++%2==0)
{
flag_secondtask = 1;
@@ -260,19 +501,15 @@
flag_sleeptimer = 1;
- //马达震动逻辑
- if(motor_open_air_flag||moter_open_uwb_flag)
- {
- if (motor_count++%2==0)
- {
- motor_power_state = 1;
- }else{
- motor_power_state = 0;
- }
- } else {
- motor_power_state=1;
- }
+ charge_state_change();//充电状态判断
+ if(enbale_blink_flag)
+ {
+ green_charge_state=0;
+ charge_red_off();
+ }
+ if(delaysleep_count>0)
+ delaysleep_count--;
//GPS工作逻辑
}
@@ -285,36 +522,85 @@
nomove_count=0;
}
uint8_t flag_4G_recdata;
-static void _4gUsart_handler(enum IO_PIN_T pin)
+void _4gUsart_handler(enum IO_PIN_T pin)
{
- LOG_INFO(TRACE_MODULE_APP, "4G RX 唤醒\r\n");
- // flag_4G_recdata = 1;
- // AIR780EUartInit();
+ //LOG_INFO(TRACE_MODULE_APP, "4G RX 唤醒\r\n");
+ flag_4G_recdata = 1;
+ delaysleep_count = 3;
}
+void Air780E_4G_POLL(void)
+{
+if(!power_low_flag)//确认是否休眠下才开启功能
+ {
+ if(flag_TCP_reconnectting||IfTCPConnected())
+ {
+ // LOG_INFO(TRACE_MODULE_APP, "处理4G任务\r\n");
+
+// if(flag_4guart_needinit)
+// {
+// flag_4guart_needinit = 0;
+// AIR780EUartInit();
+// }//yuan
+ if(flag_4G_recdata==1)
+ {
+ flag_4G_recdata = 2;
+
+ //LOG_INFO(TRACE_MODULE_APP, "运行Socket_RecvAll tt2 %d\r\n",tt2);
+ Socket_RecvAll();
+ }
+ air780_led_on();
+ Internet_Poll();
+ HIDO_ATLitePoll();
+ HIDO_TimerPoll();
+ TCPClient_Poll();
+ air780_led_off();
+ }
+ }
+}
+extern uint16_t ip0,ip1,ip2,ip3,port,air780e_send_second;
+extern uint8_t gps_4g_flag;
+extern uint8_t gps_need_data_flag;
void Program_Init(void)
{
Usart1ParseDataCallback = UsartParseDataHandler;//需改为默认为gps处理，UsartParseDataHandler为升级处理当调试时候改为
parameter_init_anchor();//g_com_map表初始化角色默认为基站
dev_id=g_com_map[DEV_ID];//这里不太对
group_id=g_com_map[GROUP_ID];//组ID
- tag_frequency = 1000/g_com_map[COM_INTERVAL];//测距频率这个存的是测距时间
+// tag_frequency = 1000/g_com_map[COM_INTERVAL];//测距频率这个存的是测距时间
memcpy(&disoffset,&g_com_map[DIST_OFFSET],2);
- g_com_map[ALARM_DISTANCE1] = 40;
- g_com_map[ALARM_DISTANCE2
- ] = 40;
+// g_com_map[ALARM_DISTANCE1] = 40;
+// g_com_map[ALARM_DISTANCE2] = 40;
warning_distance=g_com_map[ALARM_DISTANCE1];
prewarning_distance=g_com_map[ALARM_DISTANCE2];
send_struct.warnDistence=warning_distance;
send_struct.alarmDistence=prewarning_distance;//更新报警距离
memcpy(&send_struct.gunLableId,&g_com_map[BIND_DEV_ID],2);//更新绑定ID
send_struct.tagId=dev_id;//更新设备ID
- g_com_map[BIND_DEV_ID] = 0x1234;
+
if(g_com_map[BIND_DEV_ID]==0)
{
UWB_work_state = UN_BIND;
}else{
UWB_work_state = SEARCH_DEV;
}
+// if(g_com_map[SEND_4G_SECOND]<60)
+// g_com_map[SEND_4G_SECOND]=60;
+ if(g_com_map[SEND_4G_MINUTE]<1)
+ g_com_map[SEND_4G_MINUTE]=1;
+
+ //air780e_send_second=g_com_map[SEND_4G_MINUTE]*60;//yuan
+ air780e_send_second=g_com_map[SEND_4G_MINUTE];
+ g_com_map[MODBUS_MODE] = 0;
+ log_4g_enable_flag=g_com_map[LOG_4G_ENABLE];
+ ip0 = (g_com_map[TCP_IP_0]>>12&0xf)*1000+(g_com_map[TCP_IP_0]>>8&0xf)*100+(g_com_map[TCP_IP_0]>>4&0xf)*10+(g_com_map[TCP_IP_0]&0xf);
+ ip1 = (g_com_map[TCP_IP_1]>>12&0xf)*1000+(g_com_map[TCP_IP_1]>>8&0xf)*100+(g_com_map[TCP_IP_1]>>4&0xf)*10+(g_com_map[TCP_IP_1]&0xf);
+ ip2 = (g_com_map[TCP_IP_2]>>12&0xf)*1000+(g_com_map[TCP_IP_2]>>8&0xf)*100+(g_com_map[TCP_IP_2]>>4&0xf)*10+(g_com_map[TCP_IP_2]&0xf);
+ ip3 = (g_com_map[TCP_IP_3]>>12&0xf)*1000+(g_com_map[TCP_IP_3]>>8&0xf)*100+(g_com_map[TCP_IP_3]>>4&0xf)*10+(g_com_map[TCP_IP_3]&0xf);
+ port = g_com_map[TCP_PORT];
+ g_com_map[VERSION] = (1<<8)|14;
+ LOG_INFO(TRACE_MODULE_APP,"设备ID: %x .\r\n",dev_id);
+ LOG_INFO(TRACE_MODULE_APP,"固件版本:UWB-4G车载手环 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+ LOG_INFO(TRACE_MODULE_APP,"服务器地址: %d.%d.%d.%d:%d.\r\n",ip0,ip1,ip2,ip3,port);
}
@@ -329,8 +615,8 @@
state5v=1;
state5V_prase_flag=state5v;
gps_prase_flag=0;//解除gps解析
- uart1_change_from_gps_to_debug();
- uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);//开启dma
+ uart1_change_from_gps_to_debug();//测试
+ // uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);//开启dma
//UartInit();
}
@@ -338,15 +624,16 @@
} else {
if(state5v==1)
{
+ g_com_map[MODBUS_MODE] = 0;
state5v=0;
state5V_prase_flag=state5v;
gps_prase_flag=1;//恢复gps解析
- uart1_change_from_debug_to_gps();
- uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);//开启dma
+ uart1_change_from_debug_to_gps();//测试
+ // uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);//开启dma
//UartDeinit();
}
- UART_CheckReceive();
}
+ UART_CheckReceive();
}
int bind_check(void)
{
@@ -369,13 +656,29 @@
first_search_flag=1;
}
}
-
+void boot_deinit(void)
+{
+ //将boot中串口返回普通gpio
+// UART0 TX/RX
+ io_pin_mux_set(IO_PIN_5, IO_FUNC0);
+ io_pin_mux_set(IO_PIN_6, IO_FUNC0);
+ // UART1 RX/TX
+ io_pin_mux_set(IO_PIN_10, IO_FUNC0);
+ io_pin_mux_set(IO_PIN_9, IO_FUNC0);
+ uart_close(UART_ID1);//解绑原来串口1
+ uart_close(UART_ID0);//解绑原来串口0
+}
uint8_t flag_4guart_needinit=0;
+uint8_t index1,index2,index3;
+int test1,test3;
+uint32_t test4;
+int16_t Voltage_input;
int main(void)
{
board_clock_run();
+ boot_deinit();
board_pins_config();
- board_debug_console_open(TRACE_PORT_UART0);
+ board_debug_console_open(TRACE_PORT_UART1);
// Reset reason
reset_cause_get();
reset_cause_clear();
@@ -399,7 +702,7 @@
// Disable watchdog timer
wdt_close(WDT_ID0);
- // LOG_INFO(TRACE_MODULE_APP, "UWB simple example\r\n");
+ LOG_INFO(TRACE_MODULE_APP, "UWB simple example\r\n");
// open system timer
//sys_timer_open();
@@ -410,82 +713,121 @@
TCPClient_Init();
gpio_open();
+ board_output_init();
//board_led_init();
-
-// adc_open(&usr_adc_cfg);
+ //检测通过后改为正常adc采集模式
+ adc_open(&usr_adc_cfg);
+
IIC2_Init();
Accelerometer_Init();
IO_control_init();
- io_pin_mux_set(SCL_PIN, IO_FUNC0);//测试测距波形
- gpio_pin_set_dir(SCL_PIN , GPIO_DIR_OUT, 0);
- io_pull_set(SCL_PIN , IO_PULL_DOWN, IO_PULL_UP_LEVEL4);
- gps_air780_power_change(1,1);//开启gps，4G
-//加速度计初始化必须在IO_control_init之前因为复用SDA引脚
- adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
- uart_open(UART_ID1, &test_uart_cfg);
- Program_Init();
+
+ gps_air780_power_change(0,1);//开启gps，4G
+ //加速度计初始化必须在IO_control_init之前因为复用SDA引脚
+ Program_Init();
+ //uart_open(UART_ID1, &test_uart_cfg);
+
+ // uart1_change_from_gps_to_debug();
+ //Uart1GpsRecDebugSend();
uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
+
// Initialize low power mode
power_init();
- // LOG_INFO(TRACE_MODULE_APP, "测试数据");
-
-
+ //AIR780E_Reset(); //4G模块重启，耗时1.5秒,这个是无法同步的关键
sleep_timer_open(true, SLEEP_TIMER_MODE_RELOAD, sleep_timer_callback);
//sleep_timer_start(__MS_TO_32K_CNT(g_com_map[COM_INTERVAL]));//测试
sleep_timer_start(__MS_TO_32K_CNT(SLEEP_TIMER_NUM));//测试
-// board_5V_input_init(voltage_input_handler);
- board_acceleration_detection_init(move_handler);
-
- //AIR780E_Reset(); //4G模块重启，耗时1.5秒,这个是无法同步的关键
+ // board_5V_input_init(voltage_input_handler);
+ gpio_pin_clr(ADC_GND_ENABLE);//先拉低
+ adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
+ board_acceleration_detection_init(move_handler);
+// LOG_INFO(TRACE_MODULE_APP, "测试进入app");
+ board_4GUsart_detection_init(_4gUsart_handler);
while (1)
- {
+ { tt1=gpio_pin_get_val(ADC_GND_ENABLE);
+ //tt2 = gpio_pin_get_val(_4G_USART_RX_Pin);
+ if(!power_low_flag)//确认是否休眠下才开启功能
+ {
if(flag_TCP_reconnectting||IfTCPConnected())
{
- // LOG_INFO(TRACE_MODULE_APP, "处理4G任务\r\n");
- if(flag_4guart_needinit)
+ // LOG_INFO(TRACE_MODULE_APP, "处理4G任务\r\n");
+
+// if(flag_4guart_needinit)
+// {
+// flag_4guart_needinit = 0;
+// AIR780EUartInit();
+// }//yuan
+ if(flag_4G_recdata==1)
{
- flag_4guart_needinit = 0;
- AIR780EUartInit();
+ flag_4G_recdata = 2;
+
+ //LOG_INFO(TRACE_MODULE_APP, "运行Socket_RecvAll tt2 %d\r\n",tt2);
+ Socket_RecvAll();
}
+ air780_led_on();
Internet_Poll();
HIDO_ATLitePoll();
HIDO_TimerPoll();
TCPClient_Poll();
+ air780_led_off();
}
+ }
if(flag_secondtask)
{
flag_secondtask = 0;
SecondTask();
+
}
IdleTask();
- //3种情况后都要发包和休眠
- //if(send_flag){
- //message_construct();
- //send_udp;
- //air780_success_state=0;//关闭4G成功发送灯
- //blink_led(&air780_success_state);//成功测距闪烁4G状态灯
- //air780_success_state=0;
- //}
+ UserKeyTask();
+ IMUTask();
+
#ifndef DEBUG_MODE
//if(flag_sleeptimer)
- // if(!gpio_pin_get_val(INPUT_5V_Pin)&&((IfTCPConnected()&&Socket_IsSendQueueEmpty(0))||!flag_TCP_reconnectting&&!IfTCPConnected())&&!flag_4G_recdata) //进入休眠条件（与关系，全满足才进）：1.没有5V输入 2 TCP已连接时发送队列为空||TCP无连接时不在重连状态。
- {
- // if(!flag_4guart_needinit)
- {
- // LOG_INFO(TRACE_MODULE_APP, "4G RX 中断打开\r\n");
- // board_4GUsart_detection_init(_4gUsart_handler);
-//
- }
+// if(!gps_need_data_flag&&!gpio_pin_get_val(INPUT_5V_Pin)&&((IfTCPConnected()&&Socket_IsSendQueueEmpty(0))||!flag_TCP_reconnectting&&!IfTCPConnected())) //进入休眠条件（与关系，全满足才进）：1.没有5V输入 2 TCP已连接时发送队列为空||TCP无连接时不在重连状态。
+// {
+// if(!flag_4guart_needinit)
+// {
+// LOG_INFO(TRACE_MODULE_APP, "4G RX 中断打开\r\n");
+// board_4GUsart_detection_init(_4gUsart_handler);
+
+// }
// flag_sleeptimer =0;
// LOG_INFO(TRACE_MODULE_APP, "进入休眠\r\n");
- // flag_4guart_needinit = 1;
-//
+// flag_4guart_needinit = 1;
+
// trace_flush();
// uint32_t lock = int_lock();
// //LOG_INFO(TRACE_MODULE_APP, "进入低功耗");
// power_enter_power_down_mode(0);
// int_unlock(lock);
+// }//yuan
+
+// if(delaysleep_count==0)
+index1=IfTCPConnected();
+index2=AIR780E_IsIPIdle();
+index3=Socket_IsSendQueueEmpty(0);
+ if(delaysleep_count==0)
+ if(!gps_power_state&&!gpio_pin_get_val(INPUT_5V_Pin)&&((IfTCPConnected()&&AIR780E_IsIPIdle()&&Socket_IsSendQueueEmpty(0))||((!flag_TCP_reconnectting)&&!IfTCPConnected())||power_low_flag))
+ {
+// test1=gpio_pin_get_val(_4G_USART_RX_Pin);
+ uint32_t lock;
+ //flag_4guart_needinit = 1;
+// Internet_Poll();
+// HIDO_ATLitePoll();
+// HIDO_TimerPoll();
+// TCPClient_Poll();
+
+ // delay_us(300000);
+ trace_flush();
+ lock = int_lock();
+ power_enter_power_down_mode(0);
+ uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
+// test3=gpio_pin_get_val(_4G_USART_RX_Pin);
+ //LOG_INFO(TRACE_MODULE_APP, "进入休眠\r\n");
+ int_unlock(lock);
}
+
#endif
}
}
--
Gitblit v1.9.3