From a9d2562218af3e0b2f5a1dd9b6cb73e53dc5ac99 Mon Sep 17 00:00:00 2001
From: chen <15335560115@163.com>
Date: 星期四, 16 一月 2025 11:09:46 +0800
Subject: [PATCH] 成功与升级标签测距版本，改为chm9，但进度条标签端未显示
---
keil/include/main/main.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++++++---
1 files changed, 50 insertions(+), 3 deletions(-)
diff --git a/keil/include/main/main.c b/keil/include/main/main.c
index d18fcd3..03bef0f 100644
--- a/keil/include/main/main.c
+++ b/keil/include/main/main.c
@@ -64,7 +64,9 @@
#define SLEEP_START_TIME 10
#define FREQ_LOST_TIME 5
#define NOTAG_FREQ 1
+#define BATTERY_GET_TIME 3600
uint8_t enable_sleep_count,sleep_flag;
+uint32_t battery_get_count;
//#define DEBUG_MODE
struct UART_CFG_T test_uart_cfg =
@@ -90,7 +92,11 @@
.int_tx = false,
#endif
};
-
+static void app_wdt_callback(void *dev, uint32_t status)
+{
+ ASSERT(status, "WDT TIMEOUT，程序复位");
+ //LOG_INFO(TRACE_MODULE_APP, "程序卡死，看门狗复位");
+}
static uint32_t sample[NUM_SAMPLES] = {0};
static struct ADC_CFG_T usr_adc_cfg = {
.mode = ADC_MODE_CONTINUE, /* Selected single conversion mode */
@@ -105,6 +111,12 @@
.high_pulse_time = 4,
.settle_time = 1,
};
+ struct WDT_CFG_T app_wdt_cfg = {
+ .timeout = 32768 * 30,
+ .rst_en = true,
+ .int_en = true,
+ .callback = app_wdt_callback,
+ };
uint8_t state5v = 1;
uint8_t bat_percent=0,g_start_send_flag=1;
@@ -119,6 +131,8 @@
void Program_Init(void);
void IdleTask(void);
void boot_deinit(void);
+void Get_batterty_Voltage(void);
+void Calculate_battery_percent(void);
static void uart_receive_callback(void *dev, uint32_t err_code)
{
uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
@@ -135,6 +149,29 @@
uart_close(UART_ID0);
uart_close(UART_ID1);
}
+void Get_batterty_Voltage(void)
+{
+ battery_monitor_open();
+ fVoltage_mv=battery_monitor_get();
+ battery_monitor_close();
+ Calculate_battery_percent();
+}
+void Calculate_battery_percent(void)
+{
+ if(fVoltage_mv < 3000)
+ {
+ bat_percent = 0;
+ }
+ else if(fVoltage_mv > 3500)
+ {
+ bat_percent = 100;
+ }
+ else
+ {
+ bat_percent = ((fVoltage_mv - 3000) /8);
+ }
+ //LOG_INFO(TRACE_MODULE_APP, "The voltage is %d ,percent is %%%d \r\n",fVoltage_mv,bat_percent);
+}
static void sleep_timer_callback(void *dev, uint32_t time)
{
//sleep_timer_start(__MS_TO_32K_CNT(1000));
@@ -144,6 +181,11 @@
enable_sleep_count=0;
sleep_flag=1;
+ }
+ if(battery_get_count++>=BATTERY_GET_TIME)
+ {
+ Get_batterty_Voltage();
+ battery_get_count=0;
}
// if(freqlost_count++>FREQ_LOST_TIME)
// {
@@ -180,8 +222,9 @@
bat_percent = ((fVoltage_mv - 3300) /8);
}
}
- LOG_INFO(TRACE_MODULE_APP, "The voltage is %%%d \r\n",bat_percent);
+ //LOG_INFO(TRACE_MODULE_APP, "The voltage is %%%d \r\n",bat_percent);
}
+
static void voltage_input_handler(enum IO_PIN_T pin)
{
//LOG_INFO(TRACE_MODULE_APP, "中断唤醒\r\n");
@@ -259,6 +302,7 @@
// Disable watchdog timer
wdt_close(WDT_ID0);
+ wdt_open(WDT_ID0,&app_wdt_cfg);//30s最大上限检测喂狗
//LOG_INFO(TRACE_MODULE_APP, "UWB qiang test example\r\n");
// open system timer
@@ -274,6 +318,8 @@
uart_receive(UART_ID0,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
// Initialize low power mode
power_init();
+ Get_batterty_Voltage();//获取当前内部电压
+ //Calculate_battery_percent();
//adc_open(&usr_adc_cfg);
//adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
// Enable sleep timer
@@ -289,7 +335,7 @@
#endif
//Serial0_PutString("进入app测试\r\n");
while (1)
- {
+ { wdt_ping(WDT_ID0);//喂狗
if(g_start_send_flag)
{
//LOG_INFO(TRACE_MODULE_APP, "测距ing");
@@ -302,6 +348,7 @@
}else{
IdleTask();
}
+ LoraUp_Poll();
#ifndef DEBUG_MODE
if(sleep_flag){//开始一段时间无休眠
trace_flush();
--
Gitblit v1.9.3