From bee670865494cd5dc6086495bf10a7d5496b2864 Mon Sep 17 00:00:00 2001
From: chen <15335560115@163.com>
Date: 星期四, 12 六月 2025 10:23:08 +0800
Subject: [PATCH] 加入休眠引脚判断版本，isp脚换成别的脚，代码未修改对应引脚
---
keil/include/main/main.c | 245 +++++++++++++++++++++++++++++++++++++++++--------
1 files changed, 205 insertions(+), 40 deletions(-)
diff --git a/keil/include/main/main.c b/keil/include/main/main.c
index b2df95a..9c9f2c8 100644
--- a/keil/include/main/main.c
+++ b/keil/include/main/main.c
@@ -113,11 +113,13 @@
//*****************************************************************************
#define WSF_BUF_POOLS 5
void Fira_Change_Task(void);
-extern uint8_t normal_flag,log_4g_enable_flag;
+extern uint8_t normal_flag,log_4g_enable_flag,lora_tx_flag;
extern uint16_t ip0,ip1,ip2,ip3,port;
uint8_t group_id,enable_sleep_count;
uint32_t dev_id;
uint16_t disoffset;
+uint8_t flag_sleeptimer,flag_secondtask,secondtask_count;
+float nomove_count;
// Default pool descriptor.
static wsfBufPoolDesc_t poolDescriptors[WSF_BUF_POOLS] = {
{32, 26}, {64, 24}, {128, 4}, {256 + 32, 4}, {1024 + 32, 2},
@@ -127,9 +129,22 @@
{
// LOG_INFO(TRACE_MODULE_APP, "Wake up by sleep timer %d\r\n", time);
}
+static void sleep_timer_callback_normal(void *dev, uint32_t time)
+{
+ if(secondtask_count++%2==0)
+ {
+ flag_secondtask = 1;
+ }else{
+ flag_secondtask = 0;
+ }
+
+// if(delaysleep_count>0)
+// delaysleep_count--;
+}
void Program_Init(void)
{
Usart1ParseDataCallback = UsartParseDataHandler;//需改为默认为gps处理，UsartParseDataHandler为升级处理当调试时候改为
+
parameter_init_anchor();//g_com_map表初始化角色默认为基站
dev_id=g_com_map[DEV_ID];//这里不太对
group_id=(uint8_t)g_com_map[GROUP_ID];//组ID
@@ -155,8 +170,95 @@
port = g_com_map[TCP_PORT];
g_com_map[VERSION] = (1<<8)|0;
LOG_INFO(TRACE_MODULE_APP,"设备ID: %x .\r\n",dev_id);
- LOG_INFO(TRACE_MODULE_APP,"固件版本:4G-GPS定位手环 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+// if(gpio_pin_get_val(MODE_CHANGE_PIN))
+// LOG_INFO(TRACE_MODULE_APP,"固件版本:MK_Air_tag模式 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+// else{
+// LOG_INFO(TRACE_MODULE_APP,"固件版本:MK_免布线模式 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+// }
LOG_INFO(TRACE_MODULE_APP,"服务器地址: %d.%d.%d.%d:%d.\r\n",ip0,ip1,ip2,ip3,port);
+}
+void MinuteTask(void)
+{
+// adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
+}
+/********************************************************************************************************/
+static void Lora_irq_handler(enum IO_PIN_T pin)
+{
+ RadioIrqProcess();
+}
+void SecondTask(void)
+{static uint8_t second_count;
+
+ if(second_count++>60)
+ {
+ second_count = 0;
+ MinuteTask();
+ }
+ lora_tx_flag=1;
+
+ //Lora_Tx_Poll();
+// //UWB状态检测
+//if(!power_low_flag)//低供电下不需要检测重连
+// {
+// if(IfTCPConnected())
+// {
+// TCP_reconnect_timer =0;
+// flag_TCP_reconnectting = 0;
+// } else {
+// if(TCP_reconnect_timer<30)//如果TCP没有连接，每隔10分钟尝试连接30秒
+// {
+// flag_TCP_reconnectting = 1;
+// } else {
+// flag_TCP_reconnectting = 0;
+// }
+// if(TCP_reconnect_timer++>600)
+// {
+// TCP_reconnect_timer = 0;
+// }
+
+// }
+// }
+
+ HIDO_TimerTick();
+ if(nomove_count<=g_com_map[NOMOVESLEEP_TIME])//防止溢出
+ nomove_count++;
+ else{
+ nomove_count=g_com_map[NOMOVESLEEP_TIME]+1;
+ }
+}
+void spi_init(void)
+{
+ struct SPI_CFG_T usr_spi_cfg =
+ {
+ .bit_rate = 1000000,
+ .data_bits = 8,
+//#if TEST_SPI_MASTER
+ .slave = 0,
+//#else
+// .slave = 1,
+//#endif
+ .clk_phase = 0,
+ .clk_polarity = 0,
+ .ti_mode = 0,
+//#if (TEST_SPI_MODE == TEST_SPI_POLL_MODE)
+ .dma_rx = false,
+ .dma_tx = false,
+ .int_rx = false,
+ .int_tx = false,
+//#elif (TEST_SPI_MODE == TEST_SPI_INTERUPT_MODE)
+// .dma_rx = false,
+// .dma_tx = false,
+// .int_rx = true,
+// .int_tx = true,
+//#elif (TEST_SPI_MODE == TEST_SPI_DMA_MODE)
+// .dma_rx = true,
+// .dma_tx = true,
+// .int_rx = false,
+// .int_tx = false,
+//#endif
+ };
+
+ spi_open(SPI_ID0, &usr_spi_cfg);
}
static void board_init(void)
{
@@ -165,6 +267,7 @@
// Clock configuration
board_clock_run();
+ boot_deinit();//新加的
// Pin configuration
board_pins_config();
// Trace configuration
@@ -201,11 +304,14 @@
// Configure IO_04 for RF Switch
gpio_pin_set_dir(IO_PIN_4, GPIO_DIR_OUT, 0);
#else
- Program_Init();
- // led
- // board_led_init();
+
+ spi_init();
+ // 模式判断脚和spi nrst脚初始化
+ board_mode_pin_init();
+ Program_Init();
// board_led_on(BOARD_LED_1);
#endif
+ Board_LORA_NVIC_Init(Lora_irq_handler);
board_configure();
}
@@ -239,16 +345,35 @@
{
uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
}
-
-int main(void)
+void uart0_receive_callback(void *dev, uint32_t err_code)
{
- // Initialize MCU system
+ uart_receive(UART_ID0,m_EUART0_DMA_RXBuf,EUART0_RX_BUF_SIZE,uart0_receive_callback);
+}
+uint8_t bat_percent;
+uint8_t stationary_flag;
+void mcu_deep_sleep(void)
+{
+ uint32_t lock;
+ trace_flush();
+ lock = int_lock();
+ LOG_INFO(TRACE_MODULE_APP, "进入休眠模式\r\n");
+ sleep_timer_stop();
+ power_enter_power_down_mode(1);
+ int_unlock(lock);
+}
+int main(void)
+{
+ // Initialize MCU system
board_init();
-
- // Disable watchdog timer
+ // Disable watchdog timer
wdt_close(WDT_ID0);
LOG_INFO(TRACE_MODULE_APP, "UCI FiRa example\r\n");
-
+ delay_ms(300);//使log打印完毕
+ if(gpio_pin_get_val(SLEEP_PIN))
+ {
+ if(gpio_pin_get_val(MODE_CHANGE_PIN))//记得改回来与正式的相反
+ {
+ LOG_INFO(TRACE_MODULE_APP,"固件版本:MK_Air_tag模式 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
// Platform init for WSF
PalSysInit();
@@ -288,35 +413,40 @@
uwb_test_init(handlerId);
#endif
+#ifndef MY_MODE
uwb_open();
-// // set advanced parameters
-// struct PHY_ADV_CONFIG_T adv_config =
-// {
-// // RPM0: 40, RPM3: 60
-// .thres_fap_detect = 60,
-// // RPM0: 4, RPM3: 8
-// .nth_scale_factor = 8,
-// // RFrame SP0: 0/1, Others: 0/1/2/3
-// .ranging_performance_mode = 3,
-//#if RX_ANT_PORTS_NUM == 4
-// .skip_weakest_port_en = 1,
-//#else
-// .skip_weakest_port_en = 0,
-//#endif
-// };
-// phy_adv_params_configure(&adv_config);
+ // set advanced parameters
+ struct PHY_ADV_CONFIG_T adv_config =
+ {
+ // RPM0: 40, RPM3: 60
+ .thres_fap_detect = 60,
+ // RPM0: 4, RPM3: 8
+ .nth_scale_factor = 8,
+ // RFrame SP0: 0/1, Others: 0/1/2/3
+ .ranging_performance_mode = 3,
+#if RX_ANT_PORTS_NUM == 4
+ .skip_weakest_port_en = 1,
+#else
+ .skip_weakest_port_en = 0,
+#endif
+ };
+ phy_adv_params_configure(&adv_config);
-// // which RX ports will be used for AoA/PDoA
-// phy_rx_ant_mode_set(RX_ANT_PORTS_COMBINATION);
+ // which RX ports will be used for AoA/PDoA
+ phy_rx_ant_mode_set(RX_ANT_PORTS_COMBINATION);
-// uwbs_init();
-// uwb_app_config.ranging_flow_mode = (uint8_t)(RANGING_FLOW_FIRA);
-// uwb_app_config.filter_en = (uint8_t)(FILTER_EN);
-// uwb_app_config.session_param.tx_power_level = board_param.tx_power_fcc[CALIB_CH(uwb_app_config.ppdu_params.ch_num)];
-// uwb_app_config.ppdu_params.rx_ant_id = (uint8_t)(RX_MAIN_ANT_PORT);
+ uwbs_init();
+ uwb_app_config.ranging_flow_mode = (uint8_t)(RANGING_FLOW_FIRA);
+ uwb_app_config.filter_en = (uint8_t)(FILTER_EN);
+ uwb_app_config.session_param.tx_power_level = board_param.tx_power_fcc[CALIB_CH(uwb_app_config.ppdu_params.ch_num)];
+ uwb_app_config.ppdu_params.rx_ant_id = (uint8_t)(RX_MAIN_ANT_PORT);
+
+#elif defined MY_MODE
Uwb_init();//默认为我们测距配置
OpenUWB();
+ uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
+#endif
//
// Create UCI transmission layer task
//
@@ -335,19 +465,54 @@
// Enable sleep timer
sleep_timer_open(true, SLEEP_TIMER_MODE_ONESHOT, sleep_timer_callback);
- uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
+
while (1)
{
wsfOsDispatcher();
- if(normal_flag)
+ power_manage();
+ if(!gpio_pin_get_val(SLEEP_PIN))
{
-
+ mcu_deep_sleep();
+ }
+ }
+ }else{
+ LOG_INFO(TRACE_MODULE_APP,"固件版本:MK_免布线模式 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+ uart0_Init_normal();
+ Lora_1268_Init();
+ SwitchLoraSettings(478,7,22);
+ Uwb_init();//默认为我们测距配置
+ OpenUWB();
+ uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
+ uart_receive(UART_ID0,m_EUART0_DMA_RXBuf,EUART0_RX_BUF_SIZE,uart0_receive_callback);
+ power_init();
+ sleep_timer_open(true, SLEEP_TIMER_MODE_RELOAD, sleep_timer_callback_normal);
+ sleep_timer_start(__MS_TO_32K_CNT(SLEEP_TIMER_NUM));//测试
+ while (1)
+ {
uwb_app_poll();//我们的测距逻辑
+ if(flag_secondtask)
+ {
+ flag_secondtask = 0;
+ SecondTask();
+ //Lora_Tx_Poll();
+ }
+ Lora_Tx_Poll();
+ if(!gpio_pin_get_val(SLEEP_PIN))
+ {
+ mcu_deep_sleep();
+ }
IdleTask();
}
- power_manage();
- }
-
+ }
+}else{
+
+// while(1)
+// {
+// LOG_INFO(TRACE_MODULE_APP, "进入休眠模式\r\n");
+// }
+ power_init();
+mcu_deep_sleep();
+}
}
void app_restore_from_power_down(void)
--
Gitblit v1.9.3