From cc432b761c884a0bd8e9d83db0a4e26109fc08b1 Mon Sep 17 00:00:00 2001
From: chen <15335560115@163.com>
Date: 星期五, 08 十一月 2024 15:35:38 +0800
Subject: [PATCH] 安邦手环GPS删除部分无用数据和修改4G波特率9600出厂测试固件
---
keil/include/components/uci/src/uci_uart_driver.c | 266 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 266 insertions(+), 0 deletions(-)
diff --git a/keil/include/components/uci/src/uci_uart_driver.c b/keil/include/components/uci/src/uci_uart_driver.c
new file mode 100644
index 0000000..c27e250
--- /dev/null
+++ b/keil/include/components/uci/src/uci_uart_driver.c
@@ -0,0 +1,266 @@
+/*
+ * Copyright (c) 2019-2023 Beijing Hanwei Innovation Technology Ltd. Co. and
+ * its subsidiaries and affiliates (collectly called MKSEMI).
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form, except as embedded into an MKSEMI
+ * integrated circuit in a product or a software update for such product,
+ * must reproduce the above copyright notice, this list of conditions and
+ * the following disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * 3. Neither the name of MKSEMI nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * 4. This software, with or without modification, must only be used with a
+ * MKSEMI integrated circuit.
+ *
+ * 5. Any software provided in binary form under this license must not be
+ * reverse engineered, decompiled, modified and/or disassembled.
+ *
+ * THIS SOFTWARE IS PROVIDED BY MKSEMI "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL MKSEMI OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "wsf_queue.h"
+#include "wsf_buf.h"
+#include "mk_uart.h"
+#include "mk_power.h"
+#include "mk_misc.h"
+#include "uwb_api.h"
+#include "uci_tl_comm.h"
+#include "uci_tl_task.h"
+
+#include "board.h"
+
+#if UCI_INTF_PORT == 0
+
+#define UCI_PORT UART_ID0
+
+static void uci_tl_up_req(void);
+static void uci_tl_timer_notify(void);
+static void uci_tl_setup(void);
+static bool uci_tl_up_is_active(void);
+static void uci_rx_header_callback(void *dev, uint32_t err_code);
+static void rx_over_callback(void *dev, uint32_t err_code);
+static void uci_tx_over_callback(void *dev, uint32_t err_code);
+
+extern int uci_validate(uint8_t *buf);
+
+uci_tl_dev_t g_uci_tl_dev = {
+ .uci_tl_setup = &uci_tl_setup,
+ .uci_tl_resume = &uci_tl_setup,
+ .uci_tl_up_is_active = &uci_tl_up_is_active,
+ .uci_tl_up_req = &uci_tl_up_req,
+ .uci_tl_timer_notify = &uci_tl_timer_notify,
+};
+
+static struct UART_CFG_T uci_uart_cfg = {.parity = UART_PARITY_NONE,
+ .stop = UART_STOP_BITS_1,
+ .data = UART_DATA_BITS_8,
+ .flow = UART_FLOW_CONTROL_NONE,
+ .rx_level = UART_RXFIFO_CHAR_1,
+ .tx_level = UART_TXFIFO_EMPTY,
+ .baud = UCI_INTF_UART_BAUD,
+ .dma_en = true,
+ .int_rx = false,
+ .int_tx = false};
+
+static uint8_t recv_buff[UCI_RX_BUFF_SIZE] = {0};
+static struct UCI_TL_MSG_T *tl_up_msg = NULL;
+static bool tx_idle = true;
+
+#if (UCI_INTF_UART_HS)
+static bool rx_idle = true;
+static void host2slave_gpio_callback(enum IO_PIN_T pin);
+#endif
+
+static void uci_tl_setup(void)
+{
+ uart_open(UCI_PORT, &uci_uart_cfg);
+
+#if (UCI_INTF_UART_HS)
+ /*Host to slave pin pull-up. */
+ io_pull_set(HOST2SLAVE_HS_GPIO, IO_PULL_UP, IO_PULL_UP_LEVEL0);
+ /*Host to salve pin wake-up enalbe by low level.*/
+ power_wakeup_enable((enum POWER_WAKEUP_SOURCE_T)HOST2SLAVE_HS_GPIO, POWER_WAKEUP_LEVEL_LOW);
+
+ gpio_pin_set_dir(SLAVE2HOST_HS_GPIO, GPIO_DIR_OUT, 1);
+ gpio_pin_set_dir(HOST2SLAVE_HS_GPIO, GPIO_DIR_IN, 0);
+ rx_idle = true;
+ gpio_enable_irq(HOST2SLAVE_HS_GPIO, GPIO_IRQ_TYPE_FALLING_EDGE, host2slave_gpio_callback);
+#else
+ uart_receive(UCI_PORT, recv_buff, UCI_HEADER_SIZE, uci_rx_header_callback);
+#endif
+}
+
+static void uci_rx_header_callback(void *dev, uint32_t err_code)
+{
+ if (err_code != DMA_INT_TYPE_DONE)
+ {
+ uart_receive(UCI_PORT, recv_buff, UCI_HEADER_SIZE, uci_rx_header_callback);
+ return;
+ }
+
+ if (uci_validate(recv_buff))
+ {
+ uint16_t payload_len = *(recv_buff + 3) & 0xFFU;
+ if (payload_len)
+ {
+ WsfTimerStartMs(&g_uci_tl_dev.tl_timer, 50, WSF_TIMER_ONE_SHOT);
+ uart_receive(UCI_PORT, recv_buff + UCI_HEADER_SIZE, payload_len, rx_over_callback);
+ }
+ else
+ {
+ rx_over_callback(dev, err_code);
+ }
+ }
+ else
+ {
+ uart_receive(UCI_PORT, recv_buff, UCI_HEADER_SIZE, uci_rx_header_callback);
+ }
+}
+
+static void rx_over_callback(void *dev, uint32_t err_code)
+{
+ if (err_code != DMA_INT_TYPE_DONE)
+ {
+ return;
+ }
+
+ WsfTimerStop(&g_uci_tl_dev.tl_timer);
+
+ uint16_t frame_len = *(recv_buff + 3) + UCI_HEADER_SIZE;
+
+ if (WsfQueueCount(&g_uci_tl_dev.tl_down_queue) < UCI_MAX_DL_ITEMS)
+ {
+ struct UCI_TL_MSG_T *p;
+
+ if ((p = WsfBufAlloc((uint16_t)(frame_len + sizeof(struct UCI_TL_MSG_T)))) != NULL)
+ {
+ memcpy(p->msg, recv_buff, frame_len);
+ p->msg_length = frame_len;
+ WsfQueueEnq(&g_uci_tl_dev.tl_down_queue, p);
+ }
+ else
+ {
+ LOG_INFO(TRACE_MODULE_UCI, "No buff to queue cmd\r\n");
+ }
+ }
+
+ /* Set UCI receive event */
+ if (g_uci_tl_dev.uci_tl_down_notify != NULL)
+ {
+ g_uci_tl_dev.uci_tl_down_notify();
+ }
+
+ power_mode_clear(POWER_UNIT_UCI_RX);
+
+#if (UCI_INTF_UART_HS)
+ rx_idle = true;
+ return;
+#else
+ uart_receive(UCI_PORT, recv_buff, UCI_HEADER_SIZE, uci_rx_header_callback);
+#endif
+}
+
+static void uci_tx_over_callback(void *dev, uint32_t err_code)
+{
+ if (tl_up_msg)
+ {
+ WsfBufFree(tl_up_msg);
+ tl_up_msg = NULL;
+ }
+
+ g_uci_tl_dev.uci_tl_up_done_notify();
+}
+
+#if (UCI_INTF_UART_HS)
+static void host2slave_gpio_callback(enum IO_PIN_T pin)
+{
+ if (!gpio_pin_get_val(HOST2SLAVE_HS_GPIO) && rx_idle)
+ {
+ rx_idle = false;
+ WsfTimerStartMs(&g_uci_tl_dev.tl_timer, UCI_HS_TIMEOUT_MS, WSF_TIMER_ONE_SHOT);
+ uart_receive(UCI_PORT, recv_buff, UCI_HEADER_SIZE, uci_rx_header_callback);
+ power_mode_request(POWER_UNIT_UCI_RX, POWER_MODE_SLEEP);
+ }
+}
+#endif
+
+static void uci_tl_up_req(void)
+{
+ if (!tx_idle)
+ {
+ return;
+ }
+
+ /* Get messages from the up queue */
+ tl_up_msg = WsfQueueDeq(&g_uci_tl_dev.tl_up_queue);
+
+ if (tl_up_msg != NULL)
+ {
+ if (tl_up_msg->msg_length == 0)
+ {
+ WsfBufFree(tl_up_msg);
+ tl_up_msg = NULL;
+ g_uci_tl_dev.uci_tl_up_done_notify();
+ }
+ else
+ {
+ tx_idle = false;
+#if (UCI_INTF_UART_HS)
+ gpio_pin_clr(SLAVE2HOST_HS_GPIO);
+ // delay to send
+ delay_us(UCI_INTF_UART_HS_DELAYED_SEND_US);
+#endif
+ uart_send(UCI_PORT, tl_up_msg->msg, tl_up_msg->msg_length, uci_tx_over_callback);
+ power_mode_request(POWER_UNIT_UCI_TX, POWER_MODE_SLEEP);
+ }
+ }
+ else
+ {
+ LOG_INFO(TRACE_MODULE_UCI, "Up queue is empty\r\n");
+ g_uci_tl_dev.uci_tl_up_done_notify();
+ }
+}
+
+static bool uci_tl_up_is_active(void)
+{
+ if (!uart_fifo_busy(UCI_PORT) && !tx_idle)
+ {
+#if (UCI_INTF_UART_HS)
+ gpio_pin_set(SLAVE2HOST_HS_GPIO);
+#endif
+ tx_idle = true;
+ power_mode_clear(POWER_UNIT_UCI_TX);
+ }
+
+ return !tx_idle;
+}
+
+static void uci_tl_timer_notify(void)
+{
+ power_mode_clear(POWER_UNIT_UCI_RX);
+#if (UCI_INTF_UART_HS)
+ rx_idle = true;
+#endif
+}
+
+#endif
--
Gitblit v1.9.3