From cc432b761c884a0bd8e9d83db0a4e26109fc08b1 Mon Sep 17 00:00:00 2001
From: chen <15335560115@163.com>
Date: 星期五, 08 十一月 2024 15:35:38 +0800
Subject: [PATCH] 安邦手环GPS删除部分无用数据和修改4G波特率9600出厂测试固件
---
keil/include/drivers/mk_wdt.h | 170 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 170 insertions(+), 0 deletions(-)
diff --git a/keil/include/drivers/mk_wdt.h b/keil/include/drivers/mk_wdt.h
new file mode 100644
index 0000000..4f6e1b8
--- /dev/null
+++ b/keil/include/drivers/mk_wdt.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright (c) 2019-2023 Beijing Hanwei Innovation Technology Ltd. Co. and
+ * its subsidiaries and affiliates (collectly called MKSEMI).
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form, except as embedded into an MKSEMI
+ * integrated circuit in a product or a software update for such product,
+ * must reproduce the above copyright notice, this list of conditions and
+ * the following disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * 3. Neither the name of MKSEMI nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * 4. This software, with or without modification, must only be used with a
+ * MKSEMI integrated circuit.
+ *
+ * 5. Any software provided in binary form under this license must not be
+ * reverse engineered, decompiled, modified and/or disassembled.
+ *
+ * THIS SOFTWARE IS PROVIDED BY MKSEMI "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL MKSEMI OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef MK_WDT_H_
+#define MK_WDT_H_
+#include "mk_common.h"
+
+/**
+ * @addtogroup MK8000_WDT
+ * @{
+ */
+
+/**
+ * @brief WDT device IDs enumeration
+ */
+enum WDT_DEV_T
+{
+ WDT_ID0 = 0,
+ WDT_MAX_NUM
+};
+
+/**
+ * @brief WDT config structure
+ */
+struct WDT_CFG_T
+{
+ uint32_t timeout; /*!< Specifies the load value of the decrement counter. */
+ uint8_t rst_en; /*!< Specifies whether the reset is enabled or disabled. \n
+ This parameter shoule be one of the following values:
+ @arg true is enable
+ @arg false is disable
+ */
+ uint8_t int_en; /*!< Specifies whether the interupt is enabled or disabled. \n
+ This parameter shoule be one of the following values:
+ @arg true is enable
+ @arg false is disable
+ */
+ uint8_t reserved[2]; /*!< reserved */
+ drv_callback_t callback; /*!< Specifies the pointer to WDT Callback function */
+};
+
+/**
+ * @brief WDT handle Structure
+ */
+struct WDT_HANDLE_T
+{
+ WDT_TypeDef *const base; /*!< WDT registers base address */
+ const IRQn_Type irq; /*!< WDT interupt number */
+ uint8_t wdt_started; /*!< WDT start flag */
+ uint8_t rst_en; /*!< WDT reset output switch */
+ uint8_t int_en; /*!< WDT interupt switch */
+ uint8_t reserved[1]; /*!< reserved */
+ drv_callback_t callback; /*!< Pointer to WDT Callback function */
+};
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief open WDT
+ * @note both rst_en and int_en in cfg should be set to true
+ * @param[in] id WDT device ID. \n
+ * This parameter should be one of the WDT_DEV_T enum values as below
+ * @arg WDT_ID0 wdt0
+ * @param[in] config pointer to a WDT_CFG_T structure that contains the configuration information for WDT. \n
+ * @return
+ * @arg DRV_ERROR open failed
+ * @arg DEV_OK open succeed
+ */
+int wdt_open(enum WDT_DEV_T id, struct WDT_CFG_T *config);
+
+/**
+ * @brief reload WDT counter
+ * @param[in] id WDT device ID. \n
+ * This parameter should be one of the WDT_DEV_T enum values as below
+ * @arg WDT_ID0 wdt0
+ * @return
+ * @arg DRV_ERROR error id
+ * @arg DEV_OK open succeed
+ */
+int wdt_ping(enum WDT_DEV_T id);
+
+/**
+ * @brief close WDT
+ * @param[in] id WDT device ID. \n
+ * This parameter should be one of the WDT_DEV_T enum values as below
+ * @arg WDT_ID0 wdt0
+ * @return
+ * @arg DRV_ERROR error id
+ * @arg DEV_OK open succeed
+ */
+int wdt_close(enum WDT_DEV_T id);
+
+/**
+ * @brief set WDT load value of the decrement counter
+ * @note this function will clear interupt and reload decrement counter
+ * @param[in] id WDT device ID. \n
+ * This parameter should be one of the WDT_DEV_T enum values as below
+ * @arg WDT_ID0 wdt0
+ * @param[in] time load value.
+ * @return
+ * @arg DRV_ERROR error id or WDT is not opened
+ * @arg DEV_OK open succeed
+ */
+int wdt_set_time(enum WDT_DEV_T id, uint32_t time);
+
+/**
+ * @brief get WDT current value of the decrement counter
+ * @param[in] id WDT device ID. \n
+ * This parameter should be one of the WDT_DEV_T enum values as below
+ * @arg WDT_ID0 wdt0
+ * @param[out] time Pointer to timeleft.
+ * @return
+ * @arg DRV_ERROR error id or WDT is not opened
+ * @arg DEV_OK open succeed
+ */
+int wdt_time_left(enum WDT_DEV_T id, uint32_t *time);
+
+/**
+ * @brief This function handles WDT interrupt.
+ */
+void WDT_IRQHandler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+/**
+ * @}
+ */
+
+#endif /* MK_WDT_H_ */
--
Gitblit v1.9.3