From cc432b761c884a0bd8e9d83db0a4e26109fc08b1 Mon Sep 17 00:00:00 2001
From: chen <15335560115@163.com>
Date: 星期五, 08 十一月 2024 15:35:38 +0800
Subject: [PATCH] 安邦手环GPS删除部分无用数据和修改4G波特率9600出厂测试固件
---
pin_config.c | 113 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 113 insertions(+), 0 deletions(-)
diff --git a/pin_config.c b/pin_config.c
new file mode 100644
index 0000000..6fb7862
--- /dev/null
+++ b/pin_config.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright (c) 2019-2023 Beijing Hanwei Innovation Technology Ltd. Co. and
+ * its subsidiaries and affiliates (collectly called MKSEMI).
+ *
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form, except as embedded into an MKSEMI
+ * integrated circuit in a product or a software update for such product,
+ * must reproduce the above copyright notice, this list of conditions and
+ * the following disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * 3. Neither the name of MKSEMI nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * 4. This software, with or without modification, must only be used with a
+ * MKSEMI integrated circuit.
+ *
+ * 5. Any software provided in binary form under this license must not be
+ * reverse engineered, decompiled, modified and/or disassembled.
+ *
+ * THIS SOFTWARE IS PROVIDED BY MKSEMI "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL MKSEMI OR CONTRIBUTORS BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "mk_io.h"
+#include "board.h"
+#include "Usart.h"
+extern struct UART_CFG_T test_uart_cfg;
+extern void uart_receive_callback(void *dev, uint32_t err_code);
+void board_pins_config(void)
+{
+ // UART0 TX/RX
+ io_pin_mux_set(IO_PIN_5, IO_FUNC4);
+ io_pin_mux_set(IO_PIN_6, IO_FUNC4);
+
+// // UART1 RX/TX已修改复用引脚为ADC留出空间调试串口
+ io_pin_mux_set(IO_PIN_10, IO_FUNC4);
+ io_pin_mux_set(IO_PIN_9, IO_FUNC4);
+
+// // UART1 RX/TX GPS端口
+// io_pin_mux_set(IO_PIN_14, IO_FUNC4);
+// io_pin_mux_set(IO_PIN_13, IO_FUNC4);
+
+// //测试
+// io_pin_mux_set(IO_PIN_14, IO_FUNC0);
+// io_pull_set(IO_PIN_14 , IO_HIGH_Z, IO_PULL_UP_NONE);
+// gpio_pin_set_dir(IO_PIN_14 ,GPIO_DIR_IN, 0);
+// io_pin_mux_set(IO_PIN_13, IO_FUNC0);
+// io_pull_set(IO_PIN_13 , IO_HIGH_Z, IO_PULL_UP_NONE);
+// gpio_pin_set_dir(IO_PIN_13 ,GPIO_DIR_IN, 0);
+
+ // Single ADC, If IO0 is set to negative input, the positive input is Vref, and vice versa
+ io_pin_mux_set(IO_PIN_0, IO_FUNC1);
+ io_pull_set(IO_PIN_0, IO_HIGH_Z, IO_PULL_UP_NONE);
+
+ //5V输入检测，下拉GPIO
+ gpio_pin_set_dir(INPUT_5V_Pin , GPIO_DIR_IN, 0);
+ io_pull_set(INPUT_5V_Pin , IO_HIGH_Z, IO_PULL_UP_NONE);
+}
+void Uart1GpsRecDebugSend(void)
+{
+ io_pin_mux_set(IO_PIN_14, IO_FUNC0);//把原先uart变为普通GPIO
+ io_pin_mux_set(IO_PIN_13, IO_FUNC0);
+ uart_close(UART_ID1);//解绑原来串口1
+ // UART1 RX/TX已修改复用引脚为ADC留出空间调试串口
+ // io_pin_mux_set(IO_PIN_10,IO_FUNC4);
+ io_pin_mux_set(IO_PIN_14,IO_FUNC4);
+ io_pin_mux_set(IO_PIN_9,IO_FUNC4);
+ // uart_open(UART_ID1, &test_uart_cfg);
+ board_debug_console_open(TRACE_PORT_UART1);
+ uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);//开启dma
+}
+void uart1_change_from_gps_to_debug(void)
+{
+ io_pin_mux_set(IO_PIN_14, IO_FUNC0);//把原先uart变为普通GPIO
+ io_pin_mux_set(IO_PIN_13, IO_FUNC0);
+ uart_close(UART_ID1);//解绑原来串口1
+ // UART1 RX/TX已修改复用引脚为ADC留出空间调试串口
+ io_pin_mux_set(IO_PIN_10,IO_FUNC4);
+ io_pin_mux_set(IO_PIN_9,IO_FUNC4);
+ // uart_open(UART_ID1, &test_uart_cfg);
+ board_debug_console_open(TRACE_PORT_UART1);
+ uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);//开启dma
+
+}
+void uart1_change_from_debug_to_gps(void)
+{
+ io_pin_mux_set(IO_PIN_10,IO_FUNC0);//把原先uart变为普通GPIO
+ io_pin_mux_set(IO_PIN_9,IO_FUNC0);
+ uart_close(UART_ID1);//解绑原来串口1
+ // UART1 RX/TX GPS端口
+ io_pin_mux_set(IO_PIN_14, IO_FUNC4);
+ io_pin_mux_set(IO_PIN_13, IO_FUNC4);//不要给GPS发数据
+ uart_open(UART_ID1, &test_uart_cfg);
+ uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);//开启dma
+
+}
--
Gitblit v1.9.3