From d0ecbb6b662da93cf85096bd628d41729cd47b24 Mon Sep 17 00:00:00 2001 From: chen <15335560115@163.com> Date: 星期一, 11 十一月 2024 18:16:49 +0800 Subject: [PATCH] 手环加入上位机配置4G和GPS更新频率设置，加入供电过低保护，减少搜索为1s，震动逻辑变为10s停，500ms震，搜索模式加入校准时间函数，满足功耗稳定测距版本，加入SOS报警上传，初步加入查询伪代码，加入休眠唤醒逻辑 --- keil/include/drivers/global_param.h | 47 +++++++++++++++++++++++++++-------------------- 1 files changed, 27 insertions(+), 20 deletions(-) diff --git a/keil/include/drivers/global_param.h b/keil/include/drivers/global_param.h index c3fabad..222079d 100644 --- a/keil/include/drivers/global_param.h +++ b/keil/include/drivers/global_param.h @@ -8,47 +8,58 @@ #define DEFAULT_DEV_ID 5555 //默认设备ID是5555 /*---------------Map Definition-------------------*/ -#define MAP_SIGN_INDEX 0x0 -#define VERSION 0x1 -#define DEV_ID 0x2 //设备的Id +#define MAP_SIGN_INDEX 0x0 +#define VERSION 0x1 +#define DEV_ID 0x2 //设备的Id #define COM_INTERVAL 0x3 //通讯间隔 -#define MAX_REPORT_ANC_NUM 0x4 //单次通讯基站上限 -#define GROUP_ID 0x5 //单次通讯基站下限 +#define OFFSET_AS_TAG 0x3 + +#define MAX_REPORT_ANC_NUM 0x4 //单次通讯基站上限 +#define GROUP_ID 0x5 //单次通讯基站下限 #define DIST_OFFSET 0x6 -#define DEV_ROLE 0x7 //该设备是anchor还是tag -#define ANC_POLL 0x8 //基站主动测距 +#define DEV_ROLE 0x7 //该设备是anchor还是tag +#define ANC_POLL 0x8 //基站主动测距 #define ALARM_DEV 0x9 //是哪个设备报警 -#define ALARM_DISTANCE1 0xB //小于多少距离报警 +#define ALARM_DISTANCE1 0xA //小于多少距离报警 #define ALARM_DISTANCE2 0xB //小于多少距离报警 #define ALARM_DISTANCE3 0xC //小于多少距离报警 #define PAIR_ID 0xD //小于多少距离报警 -#define BIND_DEV_ID 0xD //绑定的设备ID + #define HEARTBEAT 0xE -#define SEND_4G_FREQUENCY 0xE //4G上报频率 #define MODBUS_MODE 0xF -#define QUIT_SLOT_TIME 5 +#define QUIT_SLOT_TIME 10 #define MOTOR_ONTIME_INDEX 0x10 -#define MOTORBEEPER_INDEX 0x11 + +#define TCP_IP_0 0x11 +#define TCP_IP_1 0x12 +#define TCP_IP_2 0x13 +#define TCP_IP_3 0x14 +#define TCP_PORT ALARM_DISTANCE3 + #define NEARBASE_ID1 0x11 #define NEARBASE_ID2 0x12 #define NEARBASE_ID3 0x13 #define NEARBASE_ID4 0x14 #define NEARBASE_ID5 0x15 +#define BIND_DEV_ID 0x16//绑定的设备ID #define NEARBASE_ID6 0x16 #define NEARBASE_ID7 0x17 #define NEARBASE_ID8 0x18 #define NEARBASE_ID9 0x19 +#define LOG_4G_ENABLE 0x19 #define NEARBASE_ID10 0x1a +#define SEND_4G_MINUTE 0x1B //4G上报频率分钟为单位 #define POWER 0x1B #define IMU_THRES 0x1C -#define NOMOVESLEEP_TIME 0x1D -#define MOTOR_ENABLE 0x1E -#define IMU_ENABLE 0x1F +#define NOMOVESLEEP_TIME 0x1D +#define MOTOR_ENABLE 0x1E +#define IMU_ENABLE 0x1F #define REMOTEPARA_STATE 0x20 +#define GPS_REFRESH_WAIT_COUNT 0x20 #define IMU_DUARTION 0x21 #define ACTIVE_INDEX 0x22 #define UWB_ACTIVE_FLAG_IDX 0x23 @@ -58,11 +69,7 @@ #define CNT_REBOOT 0x31 #define CNT_UPDATE 0x32 -#define TCP_IP_0 0x39 -#define TCP_IP_1 0x3a -#define TCP_IP_2 0x3b -#define TCP_IP_3 0x3c -#define TCP_PORT 0x3d + /*------------END Map Definition-------------------*/ -- Gitblit v1.9.3