From d98992728dbf38f50e3f4a3027dc40e554ebcbcb Mon Sep 17 00:00:00 2001
From: chen <15335560115@163.com>
Date: 星期三, 25 九月 2024 16:48:48 +0800
Subject: [PATCH] 安邦车载标签V1.7修改了接收频偏校准方法，增加了宏定义查看示波器同步波形，解决了两个设备同时测距时第一个测距稳定第二个不稳定的问题，适配同期版本手环V1.4
---
keil/include/board/board.c | 20 +++++++-------------
1 files changed, 7 insertions(+), 13 deletions(-)
diff --git a/keil/include/board/board.c b/keil/include/board/board.c
index 343489f..70938eb 100644
--- a/keil/include/board/board.c
+++ b/keil/include/board/board.c
@@ -61,7 +61,6 @@
struct BOARD_PARAM_T board_param = {0};
static GPIO_IRQ_HANDLER_T button_irq_handler = NULL;
-static GPIO_IRQ_HANDLER_T accelerate_irq_handler=NULL;
void board_clock_run(void)
{
@@ -392,17 +391,10 @@
void board_5V_input_init(GPIO_IRQ_HANDLER_T irq_handler)
{
button_irq_handler = irq_handler;
- gpio_pin_set_dir(INPUT_5V_Pin , GPIO_DIR_IN, 0);
- io_pull_set(INPUT_5V_Pin , IO_PULL_DOWN, IO_PULL_UP_LEVEL4);
+ gpio_pin_set_dir(INPUT_5V_Pin, GPIO_DIR_IN, 0);
+ io_pull_set(INPUT_5V_Pin, IO_PULL_DOWN, IO_PULL_UP_LEVEL4);
gpio_enable_irq(INPUT_5V_Pin, GPIO_IRQ_TYPE_RISING_EDGE, button_irq_handler);
- //power_wakeup_enable((enum POWER_WAKEUP_SOURCE_T)INPUT_5V_Pin, POWER_WAKEUP_LEVEL_LOW);
-}
-void board_acceleration_detection_init(GPIO_IRQ_HANDLER_T irq_handler)
-{
- accelerate_irq_handler=irq_handler;
- gpio_pin_set_dir(ACCLERATE_DETECT_Pin , GPIO_DIR_IN, 0);
- io_pull_set(ACCLERATE_DETECT_Pin, IO_PULL_DOWN, IO_PULL_UP_LEVEL4);
- gpio_enable_irq(ACCLERATE_DETECT_Pin, GPIO_IRQ_TYPE_RISING_EDGE, accelerate_irq_handler);
+ power_wakeup_enable((enum POWER_WAKEUP_SOURCE_T)INPUT_5V_Pin, POWER_WAKEUP_LEVEL_LOW);
}
void board_button_init(GPIO_IRQ_HANDLER_T irq_handler)
{
@@ -438,9 +430,10 @@
void board_configure(void)
{
}
-
+extern struct UART_CFG_T test_uart_cfg;
void board_prepare_for_power_down(void)
{
+
#if !defined(CELL_PHONE_EN)
board_led_off(BOARD_LED_1);
#endif
@@ -448,6 +441,7 @@
void board_restore_from_power_down(void)
{
+ //uart_open(UART_ID0, &test_uart_cfg);
#if defined(UCI_INTF_PORT)
uci_tl_resume();
#else
@@ -466,6 +460,6 @@
sys_timer_open();
#if TRACE_EN
- trace_open(user_trace_port, TRACE_BAUD_RATE);
+ trace_open(user_trace_port, TRACE_BAUD_RATE);//记得回复
#endif
}
--
Gitblit v1.9.3