From da02cf36b7265693bef7d982c6d46b372ed53693 Mon Sep 17 00:00:00 2001
From: chen <15335560115@163.com>
Date: 星期三, 21 五月 2025 18:16:14 +0800
Subject: [PATCH] 将网关读取标签配置和修改标签配置调通，但下发修改配置只能改组id其他能改但不能保存，掉电后会初始化问题未解决
---
keil/include/src/Radio/radio.h | 379 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 379 insertions(+), 0 deletions(-)
diff --git a/keil/include/src/Radio/radio.h b/keil/include/src/Radio/radio.h
new file mode 100644
index 0000000..eb61f7a
--- /dev/null
+++ b/keil/include/src/Radio/radio.h
@@ -0,0 +1,379 @@
+/*!
+ * \file radio.h
+ *
+ * \brief Radio driver API definition
+ *
+ * \copyright Revised BSD License, see section \ref LICENSE.
+ *
+ * \code
+ * ______ _
+ * / _____) _ | |
+ * ( (____ _____ ____ _| |_ _____ ____| |__
+ * \____ \| ___ | (_ _) ___ |/ ___) _ \
+ * _____) ) ____| | | || |_| ____( (___| | | |
+ * (______/|_____)_|_|_| \__)_____)\____)_| |_|
+ * (C)2013-2017 Semtech
+ *
+ * \endcode
+ *
+ * \author Miguel Luis ( Semtech )
+ *
+ * \author Gregory Cristian ( Semtech )
+ */
+#ifndef __RADIO_H__
+#define __RADIO_H__
+
+#include<stdint.h>
+#include<stdbool.h>
+
+//#define USE_MODEM_LORA
+
+/*!
+ * Radio driver supported modems
+ */
+typedef enum
+{
+ MODEM_FSK = 0,
+ MODEM_LORA,
+}RadioModems_t;
+
+/*!
+ * Radio driver internal state machine states definition
+ */
+typedef enum
+{
+ RF_IDLE = 0, //!< The radio is idle
+ RF_RX_RUNNING, //!< The radio is in reception state
+ RF_TX_RUNNING, //!< The radio is in transmission state
+ RF_CAD, //!< The radio is doing channel activity detection
+}RadioState_t;
+
+/*!
+ * \brief Radio driver callback functions
+ */
+typedef struct
+{
+ /*!
+ * \brief Tx Done callback prototype.
+ */
+ void ( *TxDone )( void );
+ /*!
+ * \brief Tx Timeout callback prototype.
+ */
+ void ( *TxTimeout )( void );
+ /*!
+ * \brief Rx Done callback prototype.
+ *
+ * \param [IN] payload Received buffer pointer
+ * \param [IN] size Received buffer size
+ * \param [IN] rssi RSSI value computed while receiving the frame [dBm]
+ * \param [IN] snr Raw SNR value given by the radio hardware
+ * FSK : N/A ( set to 0 )
+ * LoRa: SNR value in dB
+ */
+ void ( *RxDone )( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr );
+ /*!
+ * \brief Rx Timeout callback prototype.
+ */
+ void ( *RxTimeout )( void );
+ /*!
+ * \brief Rx Error callback prototype.
+ */
+ void ( *RxError )( void );
+ /*!
+ * \brief FHSS Change Channel callback prototype.
+ *
+ * \param [IN] currentChannel Index number of the current channel
+ */
+ void ( *FhssChangeChannel )( uint8_t currentChannel );
+
+ /*!
+ * \brief CAD Done callback prototype.
+ *
+ * \param [IN] channelDetected Channel Activity detected during the CAD
+ */
+ void ( *CadDone ) ( bool channelActivityDetected );
+}RadioEvents_t;
+
+/*!
+ * \brief Radio driver definition
+ */
+struct Radio_s
+{
+ /*!
+ * \brief Initializes the radio
+ *
+ * \param [IN] events Structure containing the driver callback functions
+ */
+ void ( *Init )( RadioEvents_t *events );
+ /*!
+ * Return current radio status
+ *
+ * \param status Radio status.[RF_IDLE, RF_RX_RUNNING, RF_TX_RUNNING]
+ */
+ RadioState_t ( *GetStatus )( void );
+ /*!
+ * \brief Configures the radio with the given modem
+ *
+ * \param [IN] modem Modem to be used [0: FSK, 1: LoRa]
+ */
+ void ( *SetModem )( RadioModems_t modem );
+ /*!
+ * \brief Sets the channel frequency
+ *
+ * \param [IN] freq Channel RF frequency
+ */
+ void ( *SetChannel )( uint32_t freq );
+ /*!
+ * \brief Checks if the channel is free for the given time
+ *
+ * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa]
+ * \param [IN] freq Channel RF frequency
+ * \param [IN] rssiThresh RSSI threshold
+ * \param [IN] maxCarrierSenseTime Max time while the RSSI is measured
+ *
+ * \retval isFree [true: Channel is free, false: Channel is not free]
+ */
+ bool ( *IsChannelFree )( RadioModems_t modem, uint32_t freq, int16_t rssiThresh, uint32_t maxCarrierSenseTime );
+ /*!
+ * \brief Generates a 32 bits random value based on the RSSI readings
+ *
+ * \remark This function sets the radio in LoRa modem mode and disables
+ * all interrupts.
+ * After calling this function either Radio.SetRxConfig or
+ * Radio.SetTxConfig functions must be called.
+ *
+ * \retval randomValue 32 bits random value
+ */
+ uint32_t ( *Random )( void );
+ /*!
+ * \brief Sets the reception parameters
+ *
+ * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa]
+ * \param [IN] bandwidth Sets the bandwidth
+ * FSK : >= 2600 and <= 250000 Hz
+ * LoRa: [0: 125 kHz, 1: 250 kHz,
+ * 2: 500 kHz, 3: Reserved]
+ * \param [IN] datarate Sets the Datarate
+ * FSK : 600..300000 bits/s
+ * LoRa: [6: 64, 7: 128, 8: 256, 9: 512,
+ * 10: 1024, 11: 2048, 12: 4096 chips]
+ * \param [IN] coderate Sets the coding rate (LoRa only)
+ * FSK : N/A ( set to 0 )
+ * LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
+ * \param [IN] bandwidthAfc Sets the AFC Bandwidth (FSK only)
+ * FSK : >= 2600 and <= 250000 Hz
+ * LoRa: N/A ( set to 0 )
+ * \param [IN] preambleLen Sets the Preamble length
+ * FSK : Number of bytes
+ * LoRa: Length in symbols (the hardware adds 4 more symbols)
+ * \param [IN] symbTimeout Sets the RxSingle timeout value
+ * FSK : timeout in number of bytes
+ * LoRa: timeout in symbols
+ * \param [IN] fixLen Fixed length packets [0: variable, 1: fixed]
+ * \param [IN] payloadLen Sets payload length when fixed length is used
+ * \param [IN] crcOn Enables/Disables the CRC [0: OFF, 1: ON]
+ * \param [IN] freqHopOn Enables disables the intra-packet frequency hopping
+ * FSK : N/A ( set to 0 )
+ * LoRa: [0: OFF, 1: ON]
+ * \param [IN] hopPeriod Number of symbols between each hop
+ * FSK : N/A ( set to 0 )
+ * LoRa: Number of symbols
+ * \param [IN] iqInverted Inverts IQ signals (LoRa only)
+ * FSK : N/A ( set to 0 )
+ * LoRa: [0: not inverted, 1: inverted]
+ * \param [IN] rxContinuous Sets the reception in continuous mode
+ * [false: single mode, true: continuous mode]
+ */
+ void ( *SetRxConfig )( RadioModems_t modem, uint32_t bandwidth,
+ uint32_t datarate, uint8_t coderate,
+ uint32_t bandwidthAfc, uint16_t preambleLen,
+ uint16_t symbTimeout, bool fixLen,
+ uint8_t payloadLen,
+ bool crcOn, bool freqHopOn, uint8_t hopPeriod,
+ bool iqInverted, bool rxContinuous );
+ /*!
+ * \brief Sets the transmission parameters
+ *
+ * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa]
+ * \param [IN] power Sets the output power [dBm]
+ * \param [IN] fdev Sets the frequency deviation (FSK only)
+ * FSK : [Hz]
+ * LoRa: 0
+ * \param [IN] bandwidth Sets the bandwidth (LoRa only)
+ * FSK : 0
+ * LoRa: [0: 125 kHz, 1: 250 kHz,
+ * 2: 500 kHz, 3: Reserved]
+ * \param [IN] datarate Sets the Datarate
+ * FSK : 600..300000 bits/s
+ * LoRa: [6: 64, 7: 128, 8: 256, 9: 512,
+ * 10: 1024, 11: 2048, 12: 4096 chips]
+ * \param [IN] coderate Sets the coding rate (LoRa only)
+ * FSK : N/A ( set to 0 )
+ * LoRa: [1: 4/5, 2: 4/6, 3: 4/7, 4: 4/8]
+ * \param [IN] preambleLen Sets the preamble length
+ * FSK : Number of bytes
+ * LoRa: Length in symbols (the hardware adds 4 more symbols)
+ * \param [IN] fixLen Fixed length packets [0: variable, 1: fixed]
+ * \param [IN] crcOn Enables disables the CRC [0: OFF, 1: ON]
+ * \param [IN] freqHopOn Enables disables the intra-packet frequency hopping
+ * FSK : N/A ( set to 0 )
+ * LoRa: [0: OFF, 1: ON]
+ * \param [IN] hopPeriod Number of symbols between each hop
+ * FSK : N/A ( set to 0 )
+ * LoRa: Number of symbols
+ * \param [IN] iqInverted Inverts IQ signals (LoRa only)
+ * FSK : N/A ( set to 0 )
+ * LoRa: [0: not inverted, 1: inverted]
+ * \param [IN] timeout Transmission timeout [ms]
+ */
+ void ( *SetTxConfig )( RadioModems_t modem, int8_t power, uint32_t fdev,
+ uint32_t bandwidth, uint32_t datarate,
+ uint8_t coderate, uint16_t preambleLen,
+ bool fixLen, bool crcOn, bool freqHopOn,
+ uint8_t hopPeriod, bool iqInverted, uint32_t timeout );
+ /*!
+ * \brief Checks if the given RF frequency is supported by the hardware
+ *
+ * \param [IN] frequency RF frequency to be checked
+ * \retval isSupported [true: supported, false: unsupported]
+ */
+ bool ( *CheckRfFrequency )( uint32_t frequency );
+ /*!
+ * \brief Computes the packet time on air in ms for the given payload
+ *
+ * \Remark Can only be called once SetRxConfig or SetTxConfig have been called
+ *
+ * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa]
+ * \param [IN] pktLen Packet payload length
+ *
+ * \retval airTime Computed airTime (ms) for the given packet payload length
+ */
+ uint32_t ( *TimeOnAir )( RadioModems_t modem, uint8_t pktLen );
+ /*!
+ * \brief Sends the buffer of size. Prepares the packet to be sent and sets
+ * the radio in transmission
+ *
+ * \param [IN]: buffer Buffer pointer
+ * \param [IN]: size Buffer size
+ */
+ void ( *Send )( uint8_t *buffer, uint8_t size );
+ /*!
+ * \brief Sets the radio in sleep mode
+ */
+ void ( *Sleep )( void );
+ /*!
+ * \brief Sets the radio in standby mode
+ */
+ void ( *Standby )( void );
+ /*!
+ * \brief Sets the radio in reception mode for the given time
+ * \param [IN] timeout Reception timeout [ms]
+ * [0: continuous, others timeout]
+ */
+ void ( *Rx )( uint32_t timeout );
+ /*!
+ * \brief Start a Channel Activity Detection
+ */
+ void ( *StartCad )( void );
+ /*!
+ * \brief Sets the radio in continuous wave transmission mode
+ *
+ * \param [IN]: freq Channel RF frequency
+ * \param [IN]: power Sets the output power [dBm]
+ * \param [IN]: time Transmission mode timeout [s]
+ */
+ void ( *SetTxContinuousWave )( uint32_t freq, int8_t power, uint16_t time );
+ /*!
+ * \brief Reads the current RSSI value
+ *
+ * \retval rssiValue Current RSSI value in [dBm]
+ */
+ int16_t ( *Rssi )( RadioModems_t modem );
+ /*!
+ * \brief Writes the radio register at the specified address
+ *
+ * \param [IN]: addr Register address
+ * \param [IN]: data New register value
+ */
+ void ( *Write )( uint16_t addr, uint8_t data );
+ /*!
+ * \brief Reads the radio register at the specified address
+ *
+ * \param [IN]: addr Register address
+ * \retval data Register value
+ */
+ uint8_t ( *Read )( uint16_t addr );
+ /*!
+ * \brief Writes multiple radio registers starting at address
+ *
+ * \param [IN] addr First Radio register address
+ * \param [IN] buffer Buffer containing the new register's values
+ * \param [IN] size Number of registers to be written
+ */
+ void ( *WriteBuffer )( uint16_t addr, uint8_t *buffer, uint8_t size );
+ /*!
+ * \brief Reads multiple radio registers starting at address
+ *
+ * \param [IN] addr First Radio register address
+ * \param [OUT] buffer Buffer where to copy the registers data
+ * \param [IN] size Number of registers to be read
+ */
+ void ( *ReadBuffer )( uint16_t addr, uint8_t *buffer, uint8_t size );
+ /*!
+ * \brief Sets the maximum payload length.
+ *
+ * \param [IN] modem Radio modem to be used [0: FSK, 1: LoRa]
+ * \param [IN] max Maximum payload length in bytes
+ */
+ void ( *SetMaxPayloadLength )( RadioModems_t modem, uint8_t max );
+ /*!
+ * \brief Sets the network to public or private. Updates the sync byte.
+ *
+ * \remark Applies to LoRa modem only
+ *
+ * \param [IN] enable if true, it enables a public network
+ */
+ void ( *SetPublicNetwork )( bool enable );
+ /*!
+ * \brief Gets the time required for the board plus radio to get out of sleep.[ms]
+ *
+ * \retval time Radio plus board wakeup time in ms.
+ */
+ uint32_t ( *GetWakeupTime )( void );
+ /*!
+ * \brief Process radio irq
+ */
+ void ( *IrqProcess )( void );
+ /*
+ * The next functions are available only on SX126x radios.
+ */
+ /*!
+ * \brief Sets the radio in reception mode with Max LNA gain for the given time
+ *
+ * \remark Available on SX126x radios only.
+ *
+ * \param [IN] timeout Reception timeout [ms]
+ * [0: continuous, others timeout]
+ */
+ void ( *RxBoosted )( uint32_t timeout );
+ /*!
+ * \brief Sets the Rx duty cycle management parameters
+ *
+ * \remark Available on SX126x radios only.
+ *
+ * \param [in] rxTime Structure describing reception timeout value
+ * \param [in] sleepTime Structure describing sleep timeout value
+ */
+ void ( *SetRxDutyCycle ) ( uint32_t rxTime, uint32_t sleepTime );
+};
+
+/*!
+ * \brief Radio driver
+ *
+ * \remark This variable is defined and initialized in the specific radio
+ * board implementation
+ */
+extern const struct Radio_s Radio;
+
+#endif // __RADIO_H__
--
Gitblit v1.9.3