From dcbd0e93b5cc05ea9f1e1152c7951a37e12d177f Mon Sep 17 00:00:00 2001
From: chen <15335560115@163.com>
Date: 星期二, 03 六月 2025 15:23:36 +0800
Subject: [PATCH] V1.13版本修改接收时间和帧间隔和延迟接收时间参数，适配铁鞋稳定一对多测距版本
---
keil/include/main/main.c | 29 ++++++++++++++++++-----------
1 files changed, 18 insertions(+), 11 deletions(-)
diff --git a/keil/include/main/main.c b/keil/include/main/main.c
index b62107c..5d0bbf9 100644
--- a/keil/include/main/main.c
+++ b/keil/include/main/main.c
@@ -61,14 +61,14 @@
#define TEST_UART_MODE TEST_UART_DMA_MODE
#define NUM_SAMPLES 1
-#define SLEEP_START_TIME 60
+#define SLEEP_START_TIME 10
#define FREQ_LOST_TIME 5
#define NOTAG_FREQ 1
#define BATTERY_GET_TIME 3600
uint8_t enable_sleep_count,sleep_flag;
uint32_t battery_get_count;
//#define DEBUG_MODE
-
+uint32_t reboot_num;
struct UART_CFG_T test_uart_cfg =
{
.parity = UART_PARITY_NONE,
@@ -118,7 +118,7 @@
.callback = app_wdt_callback,
};
-uint8_t state5v = 1;
+uint8_t state5v = 0;
uint8_t bat_percent=0,g_start_send_flag=1;
int16_t fVoltage_mv;
uint8_t bat_percent;
@@ -133,6 +133,7 @@
void boot_deinit(void);
void Get_batterty_Voltage(void);
void Calculate_battery_percent(void);
+uint8_t sleep_limit_time=1;
static void uart_receive_callback(void *dev, uint32_t err_code)
{
uart_receive(UART_ID0,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
@@ -176,9 +177,12 @@
{
//sleep_timer_start(__MS_TO_32K_CNT(1000));
static uint8_t lost_jumpcount=0;
+ reboot_num++;
+ if(reboot_num>=3600)
+ NVIC_SystemReset(); //软复位回到bootloader
enable_sleep_count++;
- if(enable_sleep_count==SLEEP_START_TIME){
-
+
+ if(enable_sleep_count==sleep_limit_time){
enable_sleep_count=0;
sleep_flag=1;
}
@@ -236,21 +240,24 @@
group_id=g_com_map[GROUP_ID];
memcpy(&dev_id ,&g_com_map[DEV_ID],2);
tag_frequency=1000/g_com_map[COM_INTERVAL];
-g_com_map[VERSION] = (1<<8)|10;
+g_com_map[VERSION] = (1<<8)|13;
LOG_INFO(TRACE_MODULE_APP,"设备ID: %x .\r\n",dev_id);
-LOG_INFO(TRACE_MODULE_APP,"固件版本:UWB-标签 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+LOG_INFO(TRACE_MODULE_APP,"固件版本:UWB-免布线信标 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
}
+uint8_t test1;
void IdleTask(void)
{ UART0_CheckReceive();
+ test1=gpio_pin_get_val(INPUT_5V_Pin);
if(gpio_pin_get_val(INPUT_5V_Pin))
{
-
-
//UART_CheckSend();
// bat_percent=Get_Battary();
if(state5v==0)
{
state5v=1;
+ sleep_flag=0;
+ sleep_limit_time=30;//新增插入串口后30s不休眠
+ enable_sleep_count=0;//重新插拔可以重置时间
}
}else{
if(state5v==1)
@@ -335,11 +342,11 @@
#endif
//Serial0_PutString("进入app测试\r\n");
while (1)
- { wdt_ping(WDT_ID0);//喂狗
+ {
if(g_start_send_flag)
{
//LOG_INFO(TRACE_MODULE_APP, "测距ing");
-
+ wdt_ping(WDT_ID0);//喂狗
g_start_send_flag = 0;
gpio_pin_set(LED_PIN);//亮
TagRange();
--
Gitblit v1.9.3