From de542f653793306c903085bc3a1b590ce29caec8 Mon Sep 17 00:00:00 2001
From: zhangbo <zhangbo@qq.com>
Date: 星期四, 20 三月 2025 18:17:57 +0800
Subject: [PATCH] 时间同步BUG修复
---
keil/include/main/main.c | 61 ++++++++++++++++++++++--------
1 files changed, 44 insertions(+), 17 deletions(-)
diff --git a/keil/include/main/main.c b/keil/include/main/main.c
index e072e69..90a9681 100644
--- a/keil/include/main/main.c
+++ b/keil/include/main/main.c
@@ -275,7 +275,7 @@
MinuteTask();
}
//UWB更新列表
- TagListUpdate();
+// TagListUpdate();
//GPS_Poll();
gps_power_state=1;//测试gps长开
//UWB状态检测
@@ -298,14 +298,19 @@
}
HIDO_TimerTick();
- nomove_count++;
+
}
+uint8_t stationary_flag;
uint8_t flag_sleeptimer,flag_secondtask,secondtask_count;
uint8_t lora_wg_up=0;
extern uint8_t lora_tx_flag;
static void sleep_timer_callback(void *dev, uint32_t time)
{
+
+
g_start_send_flag=1;
+// HIDO_TimerGetTick();
+ HIDO_TimerTick();
// #ifdef DEBUG_BOXING
//// gpio_pin_clr(IO_PIN_5);//测试
// gpio_pin_set(IO_PIN_5);//测试
@@ -347,13 +352,25 @@
}
//GPS工作逻辑
-
+ if(nomove_count++>g_com_map[STATIONARY_TIME])
+ {
+ stationary_flag = 1;
+ } else
+ {
+ stationary_flag = 0;
+ }
+// nomove_count++;
+ #ifdef DEBUG_BOXING
+// gpio_pin_clr(BOXING_PIN);//测试
+ gpio_pin_set(BOXING_PIN);//测试
+ #endif
+ delay_us(1000);
}
-void phy_timer_callback(uint32_t time)
-{
- lora_tx_flag++;
-}
+//void phy_timer_callback(uint32_t time)
+//{
+// lora_tx_flag++;
+//}
void uart0_receive_callback()
{
@@ -380,9 +397,11 @@
Usart1ParseDataCallback = UsartParseDataHandler;//需改为默认为gps处理，UsartParseDataHandler为升级处理当调试时候改为
parameter_init_anchor();//g_com_map表初始化角色默认为基站
g_com_map[DEV_ID]=0x1234;
+ g_com_map[STATIONARY_TIME] = 10;
// g_com_map[GROUP_ID]=1;
dev_id=g_com_map[DEV_ID];//这里不太对
- group_id=g_com_map[GROUP_ID];//组ID
+// group_id=g_com_map[GROUP_ID];//组ID
+ group_id=0x04;
tag_frequency = 1000/g_com_map[COM_INTERVAL];//测距频率这个存的是测距时间
memcpy(&disoffset,&g_com_map[DIST_OFFSET],2);
// g_com_map[ALARM_DISTANCE1] = 40;
@@ -496,8 +515,8 @@
uart_receive(UART_ID0,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart0_receive_callback);//开启dma
//串口1
- io_pin_mux_set(UART1_RX, IO_FUNC4);
- io_pin_mux_set(UART1_TX, IO_FUNC4);
+// io_pin_mux_set(UART1_RX, IO_FUNC4);
+// io_pin_mux_set(UART1_TX, IO_FUNC4);
}
void spi_init()
{
@@ -586,17 +605,12 @@
RadioIrqProcess();
}
-
-
-
-
-
void Board_LORA_NVIC_Init(GPIO_IRQ_HANDLER_T irq_handler) //LORA 中断配置
{
// io_pin_mux_set(_4G_USART_RX_Pin,IO_FUNC0);//把原先io 变为普通GPIO
gpio_pin_set_dir(LORA_DIO , GPIO_DIR_IN, 0);
io_pull_set(LORA_DIO, IO_HIGH_Z, IO_PULL_UP_NONE);
- gpio_enable_irq(LORA_DIO, GPIO_IRQ_TYPE_RISING_EDGE, irq_handler);
+ gpio_enable_irq(LORA_DIO, GPIO_IRQ_TYPE_RISING_EDGE, irq_handler);
}
extern uint8_t pca9555writedata_input[10];//暂存输入寄存器所有配置的数组
static void pca_handler(enum IO_PIN_T pin)
@@ -625,7 +639,10 @@
Board_gpio_init();
//board_led_init();
spi_init();
+
+
Board_LORA_NVIC_Init(Lora_irq_handler);
+ pca_input_detection_init(pca_handler);
IIC2_Init();
Accelerometer_Init();
PCA9555_init();
@@ -636,11 +653,21 @@
sleep_timer_open(true, SLEEP_TIMER_MODE_RELOAD, sleep_timer_callback);
sleep_timer_start(__MS_TO_32K_CNT(1000));//测试
-
+#ifdef DEBUG_BOXING
+ io_pin_mux_set(BOXING_PIN,IO_FUNC0);
+ gpio_pin_set_dir(BOXING_PIN,GPIO_DIR_OUT,0);
+ io_pull_set(BOXING_PIN,IO_PULL_DOWN,IO_PULL_UP_LEVEL4);
+#endif
Uwbinit();
+ OpenUWB();
while (1)
{
+ #ifdef DEBUG_BOXING
+ gpio_pin_clr(BOXING_PIN);//测试
+// gpio_pin_set(BOXING_PIN);//测试
+ #endif
Lora_Tx_Poll();
+ uwb_app_poll();
IdleTask();
}
}
--
Gitblit v1.9.3