From e4581b34b42ae92d043e0fc29e1d745c396bce8f Mon Sep 17 00:00:00 2001
From: chen <15335560115@163.com>
Date: 星期五, 13 十二月 2024 11:26:37 +0800
Subject: [PATCH] 串口切换逻辑编写和测试成功
---
keil/include/main/main.c | 473 +++++++++++++++++++++++++++++++++++++++++-----------------
1 files changed, 332 insertions(+), 141 deletions(-)
diff --git a/keil/include/main/main.c b/keil/include/main/main.c
index e033776..91c2dc1 100644
--- a/keil/include/main/main.c
+++ b/keil/include/main/main.c
@@ -61,10 +61,12 @@
#include "HIDO_ATLite.h"
#include "HIDO_Timer.h"
#include "TCPClient.h"
+#include "PCA9555.h"
-//#define DEBUG_MODE
+#define DEBUG_MODE
extern int simple_main(void);
extern int temp_main(void);
+void uart_change_check(uint16_t gpio_state);
#define TEST_UART_POLL_MODE 0
#define TEST_UART_INTERUPT_MODE 1
#define TEST_UART_DMA_MODE 2
@@ -90,13 +92,19 @@
int16_t fVoltage_mv,first_search_flag;
uint8_t bat_percent,g_start_send_flag=1;
uint8_t link_success_flag,motor_count;
-uint16_t gps_wait_count;
+uint16_t gps_wait_count,gps_wait_count2;
uint8_t state5v = 1;
-uint8_t motor_power_state=1,uwb_state,air780_power_state,gps_success_state,chaging_state,changed_state,air780_success_state,first_motor_in_flag;
+uint8_t motor_power_state=1,uwb_state,air780_power_state,gps_success_state,red_charge_state,green_charge_state,air780_success_state,first_motor_in_flag;
float nomove_count=0;
static uint32_t sample[NUM_SAMPLES] = {0};
-uint8_t recev_error_num,send_messgae_count,send_flag,control_state;
+uint8_t recev_error_num,send_messgae_count,send_flag,control_state,power_low_flag;
uint8_t flag_4g_usart_rx_state = 1; //4G 串口RX当前是 RX状态，不是GPIO状态
+int input_5v_flag,air780e_flag1,air780e_flag2,air780e_flag3,air780e_flag4;
+extern uint8_t pca9555writedata_config[10];//暂存寄存器所有配置的数组
+extern uint8_t pca9555writedata_output[10];//暂存输出高低电平配置的数组
+extern uint8_t pca9555writedata_input[10];//暂存输入寄存器所有配置的数组
+extern uint8_t pca9555writedata_polarity[10];//暂存输入极性反转寄存器所有配置的数组
+uint8_t temp_pca9555writedata_input[10];//暂存上一次输入寄存器所有配置的数组
typedef enum
{ UN_BIND=0,
LINK_SUCCESS,
@@ -106,7 +114,7 @@
Commend_SendDate send_struct;
-static struct ADC_CFG_T usr_adc_cfg = {
+struct ADC_CFG_T usr_adc_cfg = {
.mode = ADC_MODE_CONTINUE, /* Selected single conversion mode */
.clk_sel = ADC_CLK_HIGH, /* Selected 62.4M high speed clock */
.vref_sel = ADC_SEL_VREF_INT, /* Using internal reference voltage (1.2V)*/
@@ -127,7 +135,7 @@
.flow = UART_FLOW_CONTROL_NONE,
.rx_level = UART_RXFIFO_CHAR_1,
.tx_level = UART_TXFIFO_EMPTY,
- .baud = BAUD_115200,
+ .baud = BAUD_9600,
#if (TEST_UART_MODE == TEST_UART_POLL_MODE)
.dma_en = false,
.int_rx = false,
@@ -145,6 +153,20 @@
void uart_receive_callback(void *dev, uint32_t err_code)
{
uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
+}
+void mcu_deep_sleep(void)
+{
+ uint32_t lock;
+ trace_flush();
+ lock = int_lock();
+ LOG_INFO(TRACE_MODULE_APP, "进入深度休眠\r\n");
+ gps_air780_power_change(0,0);//关闭gps，4G
+ sleep_timer_stop();
+ //adc_close();
+ power_enter_power_down_mode(1);
+ //LOG_INFO(TRACE_MODULE_APP, "进入深度休眠\r\n");
+ sys_reset(0);
+ int_unlock(lock);
}
static void adc_callback(void *data, uint32_t number)
{
@@ -168,6 +190,17 @@
bat_percent = ((fVoltage_mv - 3300) /8);
}
}
+ if(fVoltage_mv<3300)
+ {
+ power_low_flag=1;
+ gps_air780_power_change(gps_power_state,0);//gps原样，关闭4G
+ //LOG_INFO(TRACE_MODULE_APP, "电池电压低于3.3V，4G，GPS停止工作\r\n");
+ }else{
+ power_low_flag=0;
+ gps_air780_power_change(gps_power_state,1);//gps原样,开启4G
+ //LOG_INFO(TRACE_MODULE_APP, "电池电压正常,4G，GPS,正常工作\r\n");
+ }
+ PCA9555_Set_One_Value_Output(ADC_MINIUS,1);//拉高
// LOG_INFO(TRACE_MODULE_APP, "The voltage is %%%d \r\n",bat_percent);
}
//void UartInit(void)
@@ -177,10 +210,12 @@
//board_debug_console_open(TRACE_PORT_UART0);
//uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
//}
-extern uint8_t gps_uwb_flag;
-uint8_t TCP_reconnect_timer,flag_TCP_reconnectting = 1,flag_alam_state = 0;
-uint8_t gps_enable_flag,motor_open_air_flag,moter_open_uwb_flag;
+extern uint8_t gps_uwb_flag,gps_need_data_flag;
+uint8_t TCP_reconnect_timer,flag_TCP_reconnectting = 1,flag_alam_state = 0,userkey_state;
+uint8_t gps_enable_flag,motor_open_air_flag,moter_open_uwb_flag,flag_fenli_alarm = 0,fenli_alarm_count,delaysleep_count,enbale_blink_flag;
int need_open_gps_count;
+uint32_t keystarttime,keystarttime2;
+extern uint32_t get_in_num,get_out_num;
void MotorPoll(void)
{
if(UWB_work_state==UN_BIND) {
@@ -190,11 +225,33 @@
} else { //绑定状态下
if(anchordata_num==1) {
if(distance<g_com_map[ALARM_DISTANCE1]) { //小于预警距离
+ fenli_alarm_count = 0;
+ if(flag_fenli_alarm)
+ {
+ flag_fenli_alarm = 0;
+ fenli_alarm_count = 0;
+ _4GAlarmUpload(2);
+ }
+ }
+ }
+ if(distance>g_com_map[ALARM_DISTANCE1]||anchordata_num==0)
+ {
+ if(fenli_alarm_count++>20)
+ {
+ if(!flag_fenli_alarm)
+ {
+ flag_fenli_alarm = 1;
+ _4GAlarmUpload(1);
+ }
+ }
+ }
+ if(distance<g_com_map[ALARM_DISTANCE1]) { //小于预警距离
if(flag_alam_state)
{
flag_alam_state = 0;
- _4GAlarmUpload(2);
- }
+
+ }
+
need_open_gps_count=0;
moter_open_uwb_flag=0;//关闭震动
gps_uwb_flag=0;//关闭GPS
@@ -205,7 +262,6 @@
if(!flag_alam_state)
{
flag_alam_state = 1;
- _4GAlarmUpload(1);
}
gps_uwb_flag=1;//开启gps测距流程
need_open_gps_count=0;
@@ -217,28 +273,55 @@
if(!flag_alam_state)
{
flag_alam_state = 1;
- _4GAlarmUpload(1);
}
gps_uwb_flag=1;//开启gps测距流程
need_open_gps_count=0;
}
- }
- } else if(anchordata_num==0) {
+
+ }
+ if(anchordata_num==0) {
if(!flag_alam_state)
{
flag_alam_state = 1;
- _4GAlarmUpload(1);
}
- distance = -1;
+ distance = 0x1ffff;
gps_uwb_flag=1;//开启gps测距流程
moter_open_uwb_flag=1;//开启震动
need_open_gps_count=0;
}
}
-}
-void MinuteTask(void)
+ }
+void IMUTask(void)
{
- //adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
+ if(nomove_count>g_com_map[NOMOVESLEEP_TIME]&&g_com_map[IMU_ENABLE]==1)
+ {power_wakeup_enable((enum POWER_WAKEUP_SOURCE_T)ACCLERATE_DETECT_Pin, POWER_WAKEUP_LEVEL_HIGH);
+ mcu_deep_sleep();
+ }
+}
+void UserKeyTask(void)
+ {
+ if(!GET_USERKEY)
+ {
+ if(HIDO_TimerGetTick() - keystarttime>3)
+ {
+ userkey_state = 1;
+ keystarttime = HIDO_TimerGetTick();
+ UDPClient_UploadGPS();
+ }
+ if(HIDO_TimerGetTick() - keystarttime2>10)
+ {
+ g_com_map[CNT_RESTART] = 1;
+ }
+ }else
+ {
+ keystarttime = HIDO_TimerGetTick();
+ keystarttime2 = HIDO_TimerGetTick();
+ }
+ }
+void MinuteTask(void)
+{
+ PCA9555_Set_One_Value_Output(ADC_MINIUS,0);//拉低
+ adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
}
void SecondTask(void)
{static uint8_t second_count;
@@ -247,56 +330,85 @@
second_count = 0;
MinuteTask();
}
- //UWB更新列表
- TagListUpdate();
- //GPS_Poll();
- GPS_Poll_1h();
- //UWB状态检测
+
+// if(!power_low_flag)
+// Gps_change();
+// else{
+// gps_power_state=0;//关闭GPS
+// update_led_power_state();
+// //初始化GPS计数数据
+// gps_need_data_flag=1;
+// gps_wait_count2=0;
+// gps_wait_count=0;
+// }
+// //UWB状态检测
+//if(!power_low_flag)//低供电下不需要检测重连
+// {
+// if(IfTCPConnected())
+// {
+// TCP_reconnect_timer =0;
+// flag_TCP_reconnectting = 0;
+// } else {
+// if(TCP_reconnect_timer<30)//如果TCP没有连接，每隔10分钟尝试连接30秒
+// {
+// flag_TCP_reconnectting = 1;
+// } else {
+// flag_TCP_reconnectting = 0;
+// }
+// if(TCP_reconnect_timer++>600)
+// {
+// TCP_reconnect_timer = 0;
+// }
- if(IfTCPConnected())
- {
- TCP_reconnect_timer =0;
- flag_TCP_reconnectting = 0;
- } else {
- if(TCP_reconnect_timer<30)//如果TCP没有连接，每隔10分钟尝试连接30秒
- {
- flag_TCP_reconnectting = 1;
- } else {
- flag_TCP_reconnectting = 0;
- }
- if(TCP_reconnect_timer++>600)
- {
- TCP_reconnect_timer = 0;
- }
-
- }
+// }
+// }
HIDO_TimerTick();
+ if(nomove_count<=g_com_map[NOMOVESLEEP_TIME])//防止溢出
nomove_count++;
+ else{
+ nomove_count=g_com_map[NOMOVESLEEP_TIME]+1;
+ }
}
-uint8_t flag_sleeptimer,flag_secondtask,secondtask_count,delaysleep_count;
+uint8_t tt=1;
+uint8_t flag_sleeptimer,flag_secondtask,secondtask_count,log_4g_enable_flag;
+uint8_t uwb_enable_flag=0;
+void check_input_change(void)
+{
+ uint16_t gpio_state;
+ gpio_state=(uint16_t)pca9555writedata_input[0]<<8|pca9555writedata_input[1];
+ if(WAKE_UP_POSITION&gpio_state)
+ {
+ nomove_count=0;
+ }
+ uart_change_check(gpio_state);
+}
static void sleep_timer_callback(void *dev, uint32_t time)
{
//IO_control_init();
- // UWBPoll();
-
-
- //MotorPoll();
-
- if(secondtask_count++%2==0)
+ if(enbale_blink_flag)
+ {
+ green_charge_state=0;
+ charge_red_on();
+ }
+
+ charge_state_change();//充电状态判断
+if(secondtask_count++%2==0)
{
flag_secondtask = 1;
}else{
flag_secondtask = 0;
}
-
- flag_sleeptimer = 1;
-
- if(delaysleep_count>0)
- delaysleep_count--;
+ if(enbale_blink_flag)
+ {
+ //delay_us(5000);
+ green_charge_state=0;
+ charge_red_off();
+ }
+ if(delaysleep_count>0)
+ delaysleep_count--;
//GPS工作逻辑
-
-update_led_power_state();//更新灯状态测试
}
+
static void voltage_input_handler(enum IO_PIN_T pin)
{
@@ -305,27 +417,28 @@
{
nomove_count=0;
}
-uint8_t flag_4G_recdata,flag_entersleep;
+static void pca_handler(enum IO_PIN_T pin)
+{
+ PCA9555_readdata(PCA9555_DEVICE_ADDR,pca9555writedata_input);//读输入寄存器的值
+ check_input_change();
+}
+uint8_t flag_4G_recdata;
void _4gUsart_handler(enum IO_PIN_T pin)
{
- // if(!gpio_pin_get_val(_4G_USART_RX_Pin))
- {
- LOG_INFO(TRACE_MODULE_APP, "4G RX 唤醒\r\n");
+ //LOG_INFO(TRACE_MODULE_APP, "4G RX 唤醒\r\n");
flag_4G_recdata = 1;
delaysleep_count = 3;
- }
-
-
}
extern uint16_t ip0,ip1,ip2,ip3,port;
extern uint8_t gps_4g_flag;
+extern uint8_t gps_need_data_flag,gps_open_flag;
void Program_Init(void)
{
Usart1ParseDataCallback = UsartParseDataHandler;//需改为默认为gps处理，UsartParseDataHandler为升级处理当调试时候改为
parameter_init_anchor();//g_com_map表初始化角色默认为基站
dev_id=g_com_map[DEV_ID];//这里不太对
group_id=g_com_map[GROUP_ID];//组ID
- tag_frequency = 1000/g_com_map[COM_INTERVAL];//测距频率这个存的是测距时间
+// tag_frequency = 1000/g_com_map[COM_INTERVAL];//测距频率这个存的是测距时间
memcpy(&disoffset,&g_com_map[DIST_OFFSET],2);
// g_com_map[ALARM_DISTANCE1] = 40;
// g_com_map[ALARM_DISTANCE2] = 40;
@@ -342,50 +455,79 @@
}else{
UWB_work_state = SEARCH_DEV;
}
- if(g_com_map[SEND_4G_SECOND]<60)
- g_com_map[SEND_4G_SECOND]=60;
+ //g_com_map[SEND_4G_SECOND]
+ if(g_com_map[SEND_4G_SECOND]<30)
+ {
+ gps_open_flag=0;
+ }else{
+ gps_open_flag=1;
+ }
g_com_map[MODBUS_MODE] = 0;
+ log_4g_enable_flag=g_com_map[LOG_4G_ENABLE];
ip0 = (g_com_map[TCP_IP_0]>>12&0xf)*1000+(g_com_map[TCP_IP_0]>>8&0xf)*100+(g_com_map[TCP_IP_0]>>4&0xf)*10+(g_com_map[TCP_IP_0]&0xf);
ip1 = (g_com_map[TCP_IP_1]>>12&0xf)*1000+(g_com_map[TCP_IP_1]>>8&0xf)*100+(g_com_map[TCP_IP_1]>>4&0xf)*10+(g_com_map[TCP_IP_1]&0xf);
ip2 = (g_com_map[TCP_IP_2]>>12&0xf)*1000+(g_com_map[TCP_IP_2]>>8&0xf)*100+(g_com_map[TCP_IP_2]>>4&0xf)*10+(g_com_map[TCP_IP_2]&0xf);
ip3 = (g_com_map[TCP_IP_3]>>12&0xf)*1000+(g_com_map[TCP_IP_3]>>8&0xf)*100+(g_com_map[TCP_IP_3]>>4&0xf)*10+(g_com_map[TCP_IP_3]&0xf);
port = g_com_map[TCP_PORT];
- g_com_map[VERSION] = (1<<8)|6;
+ g_com_map[VERSION] = (1<<8)|0;
LOG_INFO(TRACE_MODULE_APP,"设备ID: %x .\r\n",dev_id);
- LOG_INFO(TRACE_MODULE_APP,"固件版本:UWB-4G手环 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
+ LOG_INFO(TRACE_MODULE_APP,"固件版本:4G-GPS定位手环 V%d.%d. \r\n",g_com_map[VERSION]>>8,g_com_map[VERSION]&0xff);
LOG_INFO(TRACE_MODULE_APP,"服务器地址: %d.%d.%d.%d:%d.\r\n",ip0,ip1,ip2,ip3,port);
}
-
-void IdleTask(void)
+void uart_change_check(uint16_t gpio_state)
{
- if(gpio_pin_get_val(INPUT_5V_Pin))
- {
-
- if(state5v==0)
+ if(INPUT_5V_POSITION&gpio_state)
+ {
+ if(state5v==0)
{
state5v=1;
state5V_prase_flag=state5v;
gps_prase_flag=0;//解除gps解析
- uart1_change_from_gps_to_debug();
- // uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);//开启dma
- //UartInit();
- }
-
- //UART_CheckSend();
- } else {
+ uart1_change_from_gps_to_debug();//测试
+ PCA9555_Set_One_Value_Output(MCU_A,1);//输出高电平切换为5V输入
+ }
+ }else {
if(state5v==1)
{
g_com_map[MODBUS_MODE] = 0;
state5v=0;
state5V_prase_flag=state5v;
gps_prase_flag=1;//恢复gps解析
- uart1_change_from_debug_to_gps();
- // uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);//开启dma
- //UartDeinit();
+ uart1_change_from_debug_to_gps();//测试
+ PCA9555_Set_One_Value_Output(MCU_A,0);//输出低电平切换为GPS
}
- }
+ }
+}
+void IdleTask(void)
+{
+// if(gpio_pin_get_val(INPUT_5V_Pin))
+// {
+
+// if(state5v==0)
+// {
+// state5v=1;
+// state5V_prase_flag=state5v;
+// gps_prase_flag=0;//解除gps解析
+// uart1_change_from_gps_to_debug();//测试
+// // uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);//开启dma
+// //UartInit();
+// }
+
+// //UART_CheckSend();
+// } else {
+// if(state5v==1)
+// {
+// g_com_map[MODBUS_MODE] = 0;
+// state5v=0;
+// state5V_prase_flag=state5v;
+// gps_prase_flag=1;//恢复gps解析
+// uart1_change_from_debug_to_gps();//测试
+// // uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);//开启dma
+// //UartDeinit();
+// }
+// }
UART_CheckReceive();
}
int bind_check(void)
@@ -421,17 +563,23 @@
uart_close(UART_ID1);//解绑原来串口1
uart_close(UART_ID0);//解绑原来串口0
}
-uint8_t flag_4guart_needinit=0,tt2;
+uint8_t flag_4guart_needinit=0;
+uint8_t index1,index2,index3;
+int16_t Voltage_input;
+int tt2;
+int test1,test3;
+uint32_t test4;
+
int main(void)
{
board_clock_run();
boot_deinit();
board_pins_config();
- board_debug_console_open(TRACE_PORT_UART1);
+ board_debug_console_open_baud(TRACE_PORT_UART1,BAUD_115200);
// Reset reason
reset_cause_get();
reset_cause_clear();
-
+//注意串口一波特率改为9600了为了能和GPS通信上
// Load calibration parameters from NVM
uint32_t internal_flash = (REG_READ(0x40000018) >> 17) & 0x1;
uint32_t external_flash = (REG_READ(0x40010030) >> 28) & 0x3;
@@ -456,90 +604,133 @@
// open system timer
//sys_timer_open();
-// // TODO 4G
+ // TODO 4G
Uart_Register(UART_ID_4G, UART_ID0);
- Internet_Init();
- TCPClient_Init();
+// Internet_Init();
+// TCPClient_Init();
gpio_open();
- //board_led_init();
-
-// adc_open(&usr_adc_cfg);
+ //board_output_init();//配置adcGND引脚
+// battery_monitor_open();
+// Voltage_input=battery_monitor_get();
+// battery_monitor_close();
+
+ adc_open(&usr_adc_cfg);
+
IIC2_Init();
Accelerometer_Init();
- IO_control_init();
- #ifdef DEBUG_BOXING
- io_pin_mux_set(SCL_PIN, IO_FUNC0);//测试测距波形
- gpio_pin_set_dir(SCL_PIN , GPIO_DIR_OUT, 0);
- io_pull_set(SCL_PIN , IO_PULL_DOWN, IO_PULL_UP_LEVEL4);
- #endif
- gps_air780_power_change(0,1);//开启gps，4G
-
+ PCA9555_init();
+ //IO_control_init();
+// io_pin_mux_set(SCL_PIN, IO_FUNC0);//测试测距波形
+// gpio_pin_set_dir(SCL_PIN , GPIO_DIR_IN, 0);
+// io_pull_set(SCL_PIN , IO_PULL_UP, IO_PULL_UP_LEVEL4);
+ //gps_air780_power_change(0,1);//开启gps，4G
//加速度计初始化必须在IO_control_init之前因为复用SDA引脚
-// adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
+ gpio_pin_clr(ADC_GND_ENABLE);
+
+ Program_Init();
//uart_open(UART_ID1, &test_uart_cfg);
- Program_Init();
// uart1_change_from_gps_to_debug();
//Uart1GpsRecDebugSend();
uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
// Initialize low power mode
power_init();
- AIR780E_Reset(); //4G模块重启，耗时1.5秒,这个是无法同步的关键
- //gps_air780_power_change(0,0);//测试
+ //AIR780E_Reset(); //4G模块重启，耗时1.5秒,这个是无法同步的关键
sleep_timer_open(true, SLEEP_TIMER_MODE_RELOAD, sleep_timer_callback);
- //sleep_timer_start(__MS_TO_32K_CNT(g_com_map[COM_INTERVAL]));//测试
- sleep_timer_start(__MS_TO_32K_CNT(SLEEP_TIMER_NUM));//测试
- board_5V_input_init(voltage_input_handler);
+ sleep_timer_start(__MS_TO_32K_CNT(g_com_map[COM_INTERVAL]));//测试
+ //sleep_timer_start(__MS_TO_32K_CNT(SLEEP_TIMER_NUM));//测试
+ // board_5V_input_init(voltage_input_handler);
+ PCA9555_Set_One_Value_Output(ADC_MINIUS,0);//拉低
+ adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
board_acceleration_detection_init(move_handler);
-//// LOG_INFO(TRACE_MODULE_APP, "测试进入app");
- board_4GUsart_detection_init(_4gUsart_handler);
-// tt2 = gpio_pin_get_val(_4G_USART_RX_Pin);
+ pca_input_detection_init(pca_handler);//pca检测输入
+ Uwb_init();
+ OpenUWB();
+
+ //board_4GUsart_detection_init(_4gUsart_handler);
while (1)
- {
- if(flag_TCP_reconnectting||IfTCPConnected())
- {
- if(flag_4G_recdata==1)
- {
- flag_4G_recdata = 2;
-
- LOG_INFO(TRACE_MODULE_APP, "运行Socket_RecvAll\r\n");
- Socket_RecvAll();
- }
- // air780_led_on();
-//LOG_INFO(TRACE_MODULE_APP, "处理4G\r\n");
- Internet_Poll();
- HIDO_ATLitePoll();
- HIDO_TimerPoll();
- TCPClient_Poll();
- // air780_led_off();
- }
+ {
+ uwb_app_poll();
+ //test4=gpio_pin_get_val(SCL_PIN);
+ //UWBPoll();
+// if(!power_low_flag)//确认是否休眠下才开启功能
+// {
+// if(flag_TCP_reconnectting||IfTCPConnected())
+// {
+// // LOG_INFO(TRACE_MODULE_APP, "处理4G任务\r\n");
+//
+//// if(flag_4guart_needinit)
+//// {
+//// flag_4guart_needinit = 0;
+//// AIR780EUartInit();
+//// }//yuan
+// if(flag_4G_recdata==1)
+// {
+// flag_4G_recdata = 2;
+//
+// //LOG_INFO(TRACE_MODULE_APP, "运行Socket_RecvAll tt2 %d\r\n",tt2);
+// Socket_RecvAll();
+// }
+//// air780_led_on();
+// Internet_Poll();
+// HIDO_ATLitePoll();
+// HIDO_TimerPoll();
+// TCPClient_Poll();
+//// air780_led_off();
+// }
+// }
if(flag_secondtask)
{
flag_secondtask = 0;
SecondTask();
+
}
+// UserKeyTask();
+// IMUTask();
IdleTask();
-
#ifndef DEBUG_MODE
//if(flag_sleeptimer)
- // if(!gpio_pin_get_val(INPUT_5V_Pin))//AIR780E_IsIPIdle() Socket_IsSendQueueEmpty(0)
- // if(flag_4G_recdata!=2)
- //if(((IfTCPConnected()&&AIR780E_IsIPIdle()&&Socket_IsSendQueueEmpty(0))||((!flag_TCP_reconnectting)&&!IfTCPConnected()))) //进入休眠条件（与关系，全满足才进）：1.没有5V输入 2 TCP已连接时发送队列为空||TCP无连接时不在重连状态。
- if(delaysleep_count==0)
- if(((IfTCPConnected()&&AIR780E_IsIPIdle()&&Socket_IsSendQueueEmpty(0))||((!flag_TCP_reconnectting)&&!IfTCPConnected()))) //进入休眠条件（与关系，全满足才进）：1.没有5V输入 2 TCP已连接时发送队列为空||TCP无连接时不在重连状态。
- {
- uint32_t lock;
-
- // power_wakeup_enable((enum POWER_WAKEUP_SOURCE_T)_4G_USART_RX_Pin, POWER_WAKEUP_LEVEL_LOW);
+// if(!gps_need_data_flag&&!gpio_pin_get_val(INPUT_5V_Pin)&&((IfTCPConnected()&&Socket_IsSendQueueEmpty(0))||!flag_TCP_reconnectting&&!IfTCPConnected())) //进入休眠条件（与关系，全满足才进）：1.没有5V输入 2 TCP已连接时发送队列为空||TCP无连接时不在重连状态。
+// {
+// if(!flag_4guart_needinit)
+// {
+// LOG_INFO(TRACE_MODULE_APP, "4G RX 中断打开\r\n");
+// board_4GUsart_detection_init(_4gUsart_handler);
+
+// }
+// flag_sleeptimer =0;
//LOG_INFO(TRACE_MODULE_APP, "进入休眠\r\n");
+// flag_4guart_needinit = 1;
+
+// trace_flush();
+// uint32_t lock = int_lock();
+// //LOG_INFO(TRACE_MODULE_APP, "进入低功耗");
+// power_enter_power_down_mode(0);
+// int_unlock(lock);
+// }//yuan
+
+ if(delaysleep_count==0)
+ if(!gps_power_state&&!gpio_pin_get_val(INPUT_5V_Pin)&&((IfTCPConnected()&&AIR780E_IsIPIdle()&&Socket_IsSendQueueEmpty(0))||((!flag_TCP_reconnectting)&&!IfTCPConnected())||power_low_flag))
+ {
+// test1=gpio_pin_get_val(_4G_USART_RX_Pin);
+ uint32_t lock;
+ //flag_4guart_needinit = 1;
+// Internet_Poll();
+// HIDO_ATLitePoll();
+// HIDO_TimerPoll();
+// TCPClient_Poll();
+
// delay_us(300000);
trace_flush();
lock = int_lock();
power_enter_power_down_mode(0);
- uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
+ uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
+// test3=gpio_pin_get_val(_4G_USART_RX_Pin);
+ //LOG_INFO(TRACE_MODULE_APP, "进入休眠\r\n");
int_unlock(lock);
}
+
#endif
}
}
--
Gitblit v1.9.3