From e71ce2771abe8afff42768a0ad74784da44c708e Mon Sep 17 00:00:00 2001
From: chen <15335560115@163.com>
Date: 星期五, 13 九月 2024 09:37:56 +0800
Subject: [PATCH] 更新一些DMAGPS数据判断逻辑
---
keil/include/main/main.c | 39 ++++++++++++++++++++-------------------
1 files changed, 20 insertions(+), 19 deletions(-)
diff --git a/keil/include/main/main.c b/keil/include/main/main.c
index 008a3d0..e033776 100644
--- a/keil/include/main/main.c
+++ b/keil/include/main/main.c
@@ -238,7 +238,7 @@
}
void MinuteTask(void)
{
- adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
+ //adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
}
void SecondTask(void)
{static uint8_t second_count;
@@ -276,7 +276,7 @@
uint8_t flag_sleeptimer,flag_secondtask,secondtask_count,delaysleep_count;
static void sleep_timer_callback(void *dev, uint32_t time)
{
- IO_control_init();
+ //IO_control_init();
// UWBPoll();
@@ -294,7 +294,8 @@
if(delaysleep_count>0)
delaysleep_count--;
//GPS工作逻辑
-
+
+update_led_power_state();//更新灯状态测试
}
static void voltage_input_handler(enum IO_PIN_T pin)
{
@@ -455,7 +456,7 @@
// open system timer
//sys_timer_open();
- // TODO 4G
+// // TODO 4G
Uart_Register(UART_ID_4G, UART_ID0);
Internet_Init();
TCPClient_Init();
@@ -463,17 +464,20 @@
gpio_open();
//board_led_init();
- adc_open(&usr_adc_cfg);
+// adc_open(&usr_adc_cfg);
IIC2_Init();
Accelerometer_Init();
IO_control_init();
+ #ifdef DEBUG_BOXING
io_pin_mux_set(SCL_PIN, IO_FUNC0);//测试测距波形
gpio_pin_set_dir(SCL_PIN , GPIO_DIR_OUT, 0);
io_pull_set(SCL_PIN , IO_PULL_DOWN, IO_PULL_UP_LEVEL4);
+ #endif
gps_air780_power_change(0,1);//开启gps，4G
+
//加速度计初始化必须在IO_control_init之前因为复用SDA引脚
- adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
- uart_open(UART_ID1, &test_uart_cfg);
+// adc_get(&sample[0], NUM_SAMPLES, adc_callback);//adc采样
+ //uart_open(UART_ID1, &test_uart_cfg);
Program_Init();
// uart1_change_from_gps_to_debug();
//Uart1GpsRecDebugSend();
@@ -482,14 +486,15 @@
// Initialize low power mode
power_init();
AIR780E_Reset(); //4G模块重启，耗时1.5秒,这个是无法同步的关键
+ //gps_air780_power_change(0,0);//测试
sleep_timer_open(true, SLEEP_TIMER_MODE_RELOAD, sleep_timer_callback);
//sleep_timer_start(__MS_TO_32K_CNT(g_com_map[COM_INTERVAL]));//测试
sleep_timer_start(__MS_TO_32K_CNT(SLEEP_TIMER_NUM));//测试
- // board_5V_input_init(voltage_input_handler);
+ board_5V_input_init(voltage_input_handler);
board_acceleration_detection_init(move_handler);
-// LOG_INFO(TRACE_MODULE_APP, "测试进入app");
+//// LOG_INFO(TRACE_MODULE_APP, "测试进入app");
board_4GUsart_detection_init(_4gUsart_handler);
- tt2 = gpio_pin_get_val(_4G_USART_RX_Pin);
+// tt2 = gpio_pin_get_val(_4G_USART_RX_Pin);
while (1)
{
if(flag_TCP_reconnectting||IfTCPConnected())
@@ -501,13 +506,13 @@
LOG_INFO(TRACE_MODULE_APP, "运行Socket_RecvAll\r\n");
Socket_RecvAll();
}
- air780_led_on();
+ // air780_led_on();
//LOG_INFO(TRACE_MODULE_APP, "处理4G\r\n");
Internet_Poll();
HIDO_ATLitePoll();
HIDO_TimerPoll();
TCPClient_Poll();
- air780_led_off();
+ // air780_led_off();
}
if(flag_secondtask)
{
@@ -522,21 +527,17 @@
// if(flag_4G_recdata!=2)
//if(((IfTCPConnected()&&AIR780E_IsIPIdle()&&Socket_IsSendQueueEmpty(0))||((!flag_TCP_reconnectting)&&!IfTCPConnected()))) //进入休眠条件（与关系，全满足才进）：1.没有5V输入 2 TCP已连接时发送队列为空||TCP无连接时不在重连状态。
if(delaysleep_count==0)
- if((IfTCPConnected()&&AIR780E_IsIPIdle()&&Socket_IsSendQueueEmpty(0)))
+ if(((IfTCPConnected()&&AIR780E_IsIPIdle()&&Socket_IsSendQueueEmpty(0))||((!flag_TCP_reconnectting)&&!IfTCPConnected()))) //进入休眠条件（与关系，全满足才进）：1.没有5V输入 2 TCP已连接时发送队列为空||TCP无连接时不在重连状态。
{
uint32_t lock;
- flag_4guart_needinit = 1;
- Internet_Poll();
- HIDO_ATLitePoll();
- HIDO_TimerPoll();
- TCPClient_Poll();
// power_wakeup_enable((enum POWER_WAKEUP_SOURCE_T)_4G_USART_RX_Pin, POWER_WAKEUP_LEVEL_LOW);
- LOG_INFO(TRACE_MODULE_APP, "进入休眠\r\n");
+ //LOG_INFO(TRACE_MODULE_APP, "进入休眠\r\n");
// delay_us(300000);
trace_flush();
lock = int_lock();
power_enter_power_down_mode(0);
+ uart_receive(UART_ID1,m_EUART_DMA_RXBuf,EUART_RX_BUF_SIZE,uart_receive_callback);
int_unlock(lock);
}
#endif
--
Gitblit v1.9.3