From 8d662de2fd262b3a485f16e197cb4d0ca2a61cdf Mon Sep 17 00:00:00 2001
From: zsh_root <979909237@qq.com>
Date: 星期三, 10 十二月 2025 17:03:47 +0800
Subject: [PATCH] 发布版V1.0

---
 systemfile/Messages_en.properties |  142 ++++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 139 insertions(+), 3 deletions(-)

diff --git a/systemfile/Messages_en.properties b/systemfile/Messages_en.properties
index 712ae18..73b292d 100644
--- a/systemfile/Messages_en.properties
+++ b/systemfile/Messages_en.properties
@@ -80,6 +80,7 @@
 antenna.cable.length=AntLen  
 feedline.length=FeedLen  
 relay1.control=Rly1Ctl
+relay.settings=Relay setting
 relay2.control=Rly2Ctl  
 relay1.alarm.distance1=Rly1Dist1
 relay1.alarm.distance2=Rly1Dist2
@@ -148,8 +149,7 @@
 hex.send=Hex
 loop.send=Loop 
 loop.time=LoopMs  
-send=Send  
-extension=Ext  
+send=Send
 specified.address=SpecAddr  
 
 read.parameters=ReadPara  
@@ -313,4 +313,140 @@
 select.serial.first=Please select a serial port first
 open.serial.failed=Failed to open serial port
 serial.opened=Serial port opened successfully
-serial.closed=Serial port closed
\ No newline at end of file
+serial.closed=Serial port closed
+config_save_success=Save configuration send successfully 
+open_serial_first=Please open the serial port first 
+
+communication.type=communication type
+serial=serial
+tcp.client=tcp_client
+tcp.server=tcp_server
+udp=UDP
+
+# NetworkConfigPanel new internationalization keys
+please.select.device=SelectDevice
+select.one.device=SelectOne
+read.timeout=ReadTimeout
+read.device.error=ReadErr
+read.success=ReadOk
+read.parameters.first=ReadFirst
+save.success=SaveOk
+udp.socket.failed=UdpSockFail
+invalid.broadcast.address=BadBroadcast
+send.udp.failed=SendUdpFail
+save.config.error=SaveCfgErr
+port.timeout.format.error=PortTimeFmt
+baudrate.format.error=BaudFmt
+port.time.format.error=PortTimeFmt
+update.ui.error=UpdateUiErr
+listen.timeout=ListenTimeout
+search.complete.timeout=SearchDoneTimeout
+send.receive.udp.failed=SendRecvFail
+search.complete.responses=SearchDone
+listen.device.error=ListenErr
+device.table.cleared=TableCleared
+table.model.error=TableModelErr
+
+
+# Satellite panel new components
+select.all=Select All
+nmea.data.table=NMEA Data Table
+utc.time=UTC time
+longitude=longitude
+latitude=latitude
+quality=quality
+num.satellites=satellites Nums
+altitude=altitude
+geoid.height=geoid height
+diff.time=diff time
+device.power=power
+reserved1=CCID
+
+# 鍦� MainFrame 鐨勫瓧绗︿覆璧勬簮涓坊鍔�
+device.not.found=device not found
+data.refreshed=data refreshed
+
+
+satellite.data=Satellite data
+sat.table.title=Satellite data panel
+
+send.success=send success
+send.fail=send fail
+
+# 鏂板缁х數鍣ㄥ弬鏁版寜閽枃鏈�
+read.relay.parameters=Read Relay
+save.relay.parameters=Save Relay
+
+# 鏂板缁х數鍣ㄦ搷浣滅姸鎬佹秷鎭�
+relay_read_success=Relay parameters read successfully
+relay_save_success=Relay parameters saved successfully
+relay_save_failed=Failed to save relay parameters
+invalid_relay_config=Invalid relay configuration data
+
+# Data log related command text
+send.read.relay.command=Send read relay parameters command
+send.save.relay.command=Send save relay parameters command
+send.read.config.command=Send read config command
+send.save.config.command=Send save config command
+send.restart.command=Send restart device command
+send.reset.factory.command=Send reset factory command
+
+# Network communication related error and prompt messages
+please.select.client=Please select a client first
+send.data.failed=Send data failed
+please.fill.host.port=Please fill in complete host address and port
+connection.established=Connection established
+data.sender.list=Data sender list
+client.connection.list=Client connection list
+not.connected=Not connected
+port.must.be.number=Port must be a number
+connection.failed.msg=Connection failed
+network.connection.closed=Network connection closed
+save.file.error=Save file error
+
+# UDP listener related
+start.listen.failed=Failed to start listening, please check if port is in use
+listen.error=Error occurred while starting listener
+udp.listener.not.ready=UDP listener not ready, cannot send data to device
+device.ip.not.found=Device {0} IP address not found
+
+# Extension panel related
+cannot.display.in.data.log=Cannot display content in data log
+send.content.empty=Send content cannot be empty
+extension.command=Extension command
+
+# Relay read timeout
+relay_read_timeout=Read relay parameters timeout
+invalid_response_data=Invalid response data
+send_data_failed=Send data failed
+config_read_timeout=Read config timeout
+invalid_config_data=Invalid config data
+config_save_failed=Save config failed
+restart_success=Restart device success
+reset_success=Reset factory success
+invalid_hex_format=Invalid hex format
+open_network_first=Please open network connection first
+search.complete=Search complete
+
+# PanelFieldUpdater related error messages
+panel.not.initialized=Panel not properly initialized
+save.parameters.failed=Save parameters failed
+field.cannot.empty={0} cannot be empty
+parameter.error=Parameter Error
+connection.failed.check.server=Connection failed, please check server
+tcp.client.connected=TCP client connected
+tcp.client.disconnected=TCP client disconnected
+
+# NetworkConfigPanel checkbox options
+option.index=Index
+option.reset=Reset
+option.link=Link
+option.rfc2217=RFC2217
+
+# NetworkConfigPanel work mode options
+work.mode.udp.client=UDP Client
+work.mode.tcp.client=TCP Client
+work.mode.tcp.server=TCP Server
+
+# NetworkConfigPanel parity options
+parity.none=NONE
\ No newline at end of file

--
Gitblit v1.10.0