From 0a7ffb3c159918e1df3e0a2ab59c48e00cc48272 Mon Sep 17 00:00:00 2001
From: yincheng.zhong <634916154@qq.com>
Date: 星期四, 02 三月 2023 15:57:30 +0800
Subject: [PATCH] V2.53 修改UWB通讯标志位，适配2.56之后的标签。
---
源码/核心板/Src/application/dw_app.c | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c" "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
index 2df9cea..2a418c0 100644
--- "a/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
+++ "b/\346\272\220\347\240\201/\346\240\270\345\277\203\346\235\277/Src/application/dw_app.c"
@@ -7,7 +7,7 @@
NEARPOLL,
}tag_state=GETNEARMSG;
static dwt_config_t config = {
- 3, /* Channel number. */
+ 2, /* Channel number. */
DWT_PRF_64M, /* Pulse repetition frequency. */
DWT_PLEN_128, /* Preamble length. */
DWT_PAC8, /* Preamble acquisition chunk size. Used in RX only. */
@@ -511,7 +511,7 @@
memcpy(&tx_nearresp_msg[DIST_IDX], &tagdist_list[taglist_pos], 4);
memcpy(&tx_nearresp_msg[ANC_SIGNALPOWER],&signalpower_list[taglist_pos],2);
tx_nearresp_msg[MAINBASE_INDEX]=flag_syncbase;
- tx_nearresp_msg[MESSAGE_TYPE_IDX]=NEAR_RESPONSE;
+ tx_nearresp_msg[MESSAGE_TYPE_IDX]=POS_RESPONSE;
//tx_nearresp_msg[MOTORSTATE_INDEX]=(remotesend_state<<4)|motorstate;
waittagconfig_reponse=0;
finalsend = 0;
@@ -575,7 +575,7 @@
{
return 1;
}
- if (rx_buffer[MESSAGE_TYPE_IDX] == NEAR_FINAL&&!memcmp(&rx_buffer[TAG_ID_IDX],&tag_id_recv,2)) //判断是否为Final包
+ if (rx_buffer[MESSAGE_TYPE_IDX] == POS_FINAL&&!memcmp(&rx_buffer[TAG_ID_IDX],&tag_id_recv,2)) //判断是否为Final包
{
resp_tx_ts = get_tx_timestamp_u64();//获得response发送时间T3
@@ -833,11 +833,11 @@
SyncPoll(sync_seq);
}
break;
- case NEAR_MSG:
+ case POS_MSG:
if(anc_id_recv==dev_id)
{
rx_buffer[TAGSLOTPOS]=taglist_pos;
- tx_near_msg[MESSAGE_TYPE_IDX] = NEAR_MSG;
+ tx_near_msg[MESSAGE_TYPE_IDX] = POS_MSG;
memcpy(&tx_near_msg[TAG_ID_IDX],&tag_id_recv,2);
memcpy(&tx_near_msg[NEARMSG_EMPTYSLOTPOS_INDEX],&tagpos_binary,4);
ancidlist_num=g_com_map[NEARBASE_NUM];
@@ -887,7 +887,7 @@
UART_PushFrame(usart_send,24);
}
break;
- case NEAR_POLL:
+ case POS_POLL:
// GPIO_WriteBit(GPIOB, GPIO_Pin_10, Bit_SET);
memcpy(&tag_id_recv,&rx_buffer[TAG_ID_IDX],2);
--
Gitblit v1.9.3